Replacing the licensed programs

Follow these steps to replace licensed programs related to IBM® i by using the manual installation method.

Begin this task at the IBM i Main Menu (or the menu you chose as an initial menu).
1. Type CHGMSGQ QSYSOPR *BREAK SEV(60) and press Enter.
2. A message display could appear. Press Enter.
3. Type ENDSBS *ALL *IMMED and press Enter.
4. When the following message appears, press Enter to continue:
```
ENDSBS SBS(*ALL) command being processed
```
5. The message System ended to restricted condition appears. Press Enter to continue.
6. Type CHGMSGQ QSYSOPR SEV(95) and press Enter.
7. A message display could appear. Press Enter.
The IBM i Main Menu (or the menu you chose as an initial menu) appears on your console.
Type GO LICPGM and press Enter.

The Work with Licensed Programs display appears.

 LICPGM                   Work with Licensed Programs                           
                                                             System:   XXXX     
 Select one of the following:                                                   
                                                                                
   Manual Install                                                               
      1. Install all

Type 1, and press Enter.

The Manual Install display appears.

                                 Manual Install                                 
                                                             System:   XXXX     
 Type choices, press Enter.                                                     
                                                                                
   Install option . . .   1            1=Installed products                     
                                       2=All products                           
                                       3=New products
                                      
                                                                                
   Installation device    OPT01        Name                                     
                                                                                
   Replace if current     N            Y=Yes                                    
                                       N=No                                     
                                                                                
   Nonaccepted agreement  2            1=Do not install licensed program                     
                                       2=Display software agreement                           
                                                                               
   Automatic IPL  . . .   N            Y=Yes                                    
                                       N=No

Type the following and press Enter:

Install option: 1
Installation device: OPT01 (See notes that follow.)
Replace if current: N (See note that follows.)
Nonaccepted agreement: 2 (See note that follows.)
Automatic IPL: N

Notes:

If you created a customized installation list, select install option 4 (Installed and additionally selected products). This option appears only if you followed the instructions to add an additional licensed program, which is described in step 10 in Preselecting the licensed programs to install.
In this example, the installation device is OPT01. If you are using a different naming convention, use the name you have assigned to the installation device.
If you are using your own distribution media, select 2 for the Install option field. For the Replace if current field, type Y.
If you are migrating data from one system to another system using documented backup and recovery procedures, type Y for the Replace if current field.
If you have not previously accepted software agreements for licensed programs that you plan to install, option 2 displays the software agreements for acceptance as each licensed program is installed. This will increase the length of your installation time. If you want to accept the software agreements now, complete step 6 and then return here.

Status displays might appear. These displays show the status of the licensed programs and language objects as they install on the system. You do not need to respond to these status displays.

                         Installing Licensed Programs                         
                                                             System: XXXX     
                                                                              
                                                                              
   Licensed programs processed . . . . . . . . . . :      0 of XXX            
                                                                              
                   Licensed program install in progress

The following display is an example of the display that appears during the installation process.

                      Installing Licensed Programs                            
                                                             System: XXXX     
  Licensed programs processed  . . . . . . . . . . :      X of XXX            
                                                                              
  Licensed                                                                    
  Program   Option   Description                                    Type      
  5770SS1     2      Online Information                             2924

This display shows which licensed programs and optional parts of licensed programs are being processed. After the *PGM objects and *LNG objects are processed, the display shows the total number of licensed programs processed.

If a message similar to the following appears, load the next media volume that contains licensed program products, and continue the installation. When you are installing from optical media, wait for the In Use indicator to go out before you respond to the message.

                                 Display Messages
                                                       System:   XXXX
 Queue  . . . . . :   QSYSOPR                Program . . . . :   *DSPMSG
   Library  . . . :     QSYS                   Library . . . :
 Severity . . . . :   95                     Delivery  . . . :   *BREAK
 
 Type reply (if required), press Enter.
   Load the next volume in optical device OPT01 (X G)
     Reply . . . . G

Type G and press Enter.

After you load each volume, type G and press Enter. If there are no more volumes to load that contain licensed programs, or if you want to end the loading process, type X and press Enter.

If a licensed program requires acceptance of a software agreement, the Software Agreements display appears. Do either of the following:
- Press F14 to accept the agreement and allow the licensed program to continue installing.
- Press F16 to decline the agreement and end the installation of that licensed program.
The Work with Licensed Programs display appears on your console when the installation process is completed. One of the following messages appears on the bottom of the Work with Licensed Programs display:
- Work with licensed programs function has completed.
- Work with licensed programs function not complete.