daemon | The foreground/background process
property. Set daemon to 'false' to run the CIM server
as foreground process or as a started task. | true
For running the CIM server
as a started task, this option is set to 'false'. | N |
enableAuditLog | When this option is set to true,
the CIM server is writing SMF records 86. For details see Audit logging with SMF record 86. | false | Y |
enableHttpConnection | The HTTP connection to the CIM server.
Enables and disables connections to the CIM server over HTTP. When
turned off only local connections are accepted. | true | N |
enableHttpsConnection | The HTTPS connection to the CIM server.
Enables and disables secure connections to the CIM server via HTTPS.
Note that it is not sufficient to turn on this option, but you must
also enable an SSL connection through the AT-TLS feature at the z/OS
Communications Server as described in Configuring the CIM server HTTPS connection using AT-TLS.
Note:
When set to true, ensure that the configured httpsPort can
be used by the CIM server. | false | N |
enableIndicationService | 'true' means the indication service
is enabled. 'false' will disable the indication service. | true | Y |
enableRemotePrivileged
UserAccess
| The remote privilege for users.
Enables and disables remote access for users with
UID 0. | false | N |
forceProviderProcesses | When this option is
set to 'true', providers will run in one or more separate address
spaces. For details see Running providers in separate address spaces.
This option is ignored when MLS support is activated. The out-of-process
provider support uses then one address space per security label for
full protection of classified documents and information. | false | N |
httpPort | The port to listen for HTTP requests.
It is recommended not to change this value.
Note:
Make
sure that the configured httpPort can be used
by the CIM server. | 5988 | N |
httpsPort | The port to listen for HTTPS requests. AT-TLS
should be configured to use this port. It is not recommended to change
this value. This value is only active if enableHttpsConnection is
set to true.
Note:
Make sure that the configured httpsPort can be used by the CIM server. | 5989 | N |
idleConnectionTimeout | The timeout value in seconds that
the CIM server uses to wait for idle client connections to close.
A
client connection is considered as idle when it is not in the process
of sending a request and when the CIM server is not processing a request
from that connection.
If the value is set to 0,
no timeout is used. | 0 | Y |
logLevel | The detail level for
logging. Possible values are INFORMATION, WARNING, SEVERE, FATAL, or TRACE (see
also Logging). | INFORMATION | Y |
maxFailedProviderModuleRestarts | The number of times a failed provider
module with indications enabled is restarted automatically before
it is moved to the state Degraded.
If this value is
zero, the failed provider module is moved to the state Degraded immediately. | 3 | Y |
maxIndicationDelivery
RetryAttempts | If set to a positive integer, this
value defines the number of times that the indication service will
try to deliver an indication to a particular listener destination.
This does not effect the original delivery attempt, thus if set to
0, the CIM server will only try to deliver the indication once. | 3 | Y |
maxProviderProcesses | The maximum number of separate
address spaces for running providers. Only in effect if forceProviderProcesses is set to TRUE.
If the value is set to 0, the number is unlimited. | 0 | Y |
messageDir | The message bundle directory. Do
not change the default. | msg | N |
minIndicationDelivery
RetryInterval | If set to a positive integer, this
value defines the minimal time interval in seconds for the indication
service to wait before retrying to deliver an indication to a listener
destination that previously failed. The CIM server may take longer
due to Quality of Service or other processing. | 30 | Y |
providerDir | The name of the directory where
the provider libraries reside. You can specify multiple directories
here, separated by a colon (':'). Provide the full path for all directories
when changing the default.
Since the CIM server has its own set of
providers, its lib directory always needs to be present in the list
of provider directories. When adding new provider directories, it
is also recommended to update the LIBPATH environment variable according
to the new values of providerDir. This is required, because a provider
may need other supplemental dynamic load libraries, which the CIM server
is not aware of and therefore would otherwise fail to load. |
lib:provider
| Y |
repositoryDir | The name of the directory for the
repository. |
/var/wbem/
repository
| N |
repositoryIs
DefaultInstanceProvider
| The CIM server repository serves as
the default provider for CIM instances when no dynamic provider has
been registered for a CIM class. | true | N |
shutdownTimeout | The timeout value in seconds that
the CIM server uses to wait for the shutdown process to complete. This
value includes terminating active providers. | 30 | Y |
slp | The CIM server uses the SLP Protocol
to announce itself over the network. | false | N |
socketWriteTimeout | The timeout value in seconds that
the CIM server uses to wait for a client to receive data from the socket.
After the timeout the CIM server will close the socket. | 20 | Y |
traceComponents | This option specifies
the component(s) that you want to trace. The value ALL enables
tracing for all components.
For more information refer to section Tracing, which also lists the valid components. | All | Y |
traceFacility | This option specifies
the trace destination.
- FILE
- saves the tracing messages to the file specified in traceFilePath
- LOG
- saves the tracing messages to the logging facility, if logLevel is set to TRACE (see Logging). This alternative combines the tracing message stream
with the log messages.
- MEMORY
- saves tracing messages in a wrap around memory
buffer. This buffer is included in memory dumps.
Specify the size
of the allocated memory with the traceMemoryBufferKbytes property.
| Memory | Y |
traceFilePath | This property specifies
the fully qualified file which saves the trace data. |
/tmp/cimserver.trc
| Y |
traceLevel | Switches tracing on
or off, and sets the trace level of detail. Choose one of the following
trace levels:
- 0
- Tracing is off
- 1
- Severe errors
- 2
- Warning level error messages
- 3
- Inter-function logic flow, medium data detail
- 4
- High data detail
- 5
- High data detail, method enter and exit
Note:
This does not include tracing for the
providers. See also Tracing. | 2 | Y |
traceMemoryBufferKbytes | Specifies the size of
the memory area which is reserved for tracing messages in kB (1kB=1024B).
The value must be at least 16.
This value only becomes valid when traceFacility=MEMORY. | 10240 | N |