ALTER

New position for img_name IMG (page segment pseg_name) is (x,y) inches or (x,y) pels. The requested graphic scaling factor was number.

Explanation

Specifies the new imaging parameters for a previously defined reference image. img_name identifies the Xerox IMG file. pseg_name identifies the Advanced Function Presentation page segment. x and y are numeric values. x represents the horizontal coordinate. y represents the vertical coordinate. Infoprint XT only includes the last sentence of the message when the scaling factor is a number other than 1.

ASSIGN

The data stream converter made these channel to line assignments: ch_number to line(s) line_num1 … line_numN.

Explanation

Specifies the VFU channel-to-line-number assignments. ch_number is the channel number. line_num1 through line_numN specify the line numbers assigned to this channel.

BATCH

The data stream converter does not support batch mode graphics. Parameter was START | END.

Explanation

The job specified processing for online banner pages and batch-mode graphics. Infoprint XT does not support BATCH=START or BATCH=END.

BEGIN

The new page position is (x,y) inches or (x,y) pels.

Explanation

Specifies the starting position of one or more logical pages. x and y are numeric values. x represents the horizontal coordinate. y represents the vertical coordinate.

BFORM

Overlay overlay_name will appear on the back of subsequent sheets.

Explanation

This message occurs when the job specifies BFORM. overlay_name identifies the AFP overlay that prints on the back of subsequent sheets.

BFORM

No overlay appears on the back of subsequent sheets.

Explanation

Specifies that no overlay prints on the back of subsequent pages. This might be an informational message, or it might indicate that an internal error exists in the job, such as two DJDE packets set to take effect at the same time.

BFORM

These overlays print on the back of subsequent sheets.

Explanation

The job specifies copy-sensitive forms. The message text includes:

Overlay:	Copy ply:
`overlay1`	`x` to `y`
⋮
`overlayN`	`x` to `y`

overlay1 through overlayN identify the AFP overlays. The Copy ply column lists the report copies on which the associated overlay prints. x and y are numeric values.

BOF

The new bottom of form line number is number.

Explanation

Specifies that number is the line number of the bottom of the form.

The data stream converter found a comment DJDE.

Explanation

A comment DJDE is present.

CANCEL

The data stream converter no longer prints these graphics on each page automatically:

Explanation

Specifies cancellation of automatic graphic imaging. The message text includes:

.img name:	Page segment name:
`img_name`	`pseg_name`

img_name identifies the Xerox IMG file. pseg_name identifies the corresponding AFP page segment.

COLLATE

The data stream converter collates multi-copy reports.

Explanation

Specifies that Infoprint XT collates the reports.

COLLATE

The data stream converter does not collate multi-copy reports.

Explanation

Specifies that Infoprint XT does not collate the reports.

COPIES

The number of report copies is number.

Explanation

Specifies that the copies are report copies and the total number of copies is nn.

COPIES

The number of sheet copies is number.

Explanation

Specifies that the copies are sheet copies and the total number of copies is nn

DATA

Printable data now begins at byte x and continues for up to y bytes.

Explanation

Specifies the beginning location of the printable data in the input record and the length of the printable information. x and y are integer values.

DEPT

The department name for account billing is dept_name.

Explanation

Specifies the dept_name to associate with accounting information.

DJDE

The data stream converter found a DJDE identifier on record line_number:djde_record.

Explanation

Specifies that line_number contains one or more DJDEs (djde_record).

Note: There is no DJDE with the name DJDE. The message title is for explanation retrievability only.

DJDE

The data stream converter found a DJDE identifier on record line_number:djde_record (downloadable PDE - fonts will not be used).

Explanation

Specifies that line_number contains one or more DJDEs (djde_record).

Note: There is no DJDE with the name DJDE. The message title is for explanation retrievability only.

DJDE

The data stream converter found a DJDE identifier on record line_number:djde_record (downloadable PDE - fonts listed in FORMAT message).

Explanation

Specifies that line_number contains one or more DJDEs (djde_record).

Note: There is no DJDE with the name DJDE. The message title is for explanation retrievability only.

DUPLEX

The print mode is mode.

Explanation

Specifies whether the print mode, mode, is DUPLEX or SIMPLEX.

END

The data stream converter found an END; DJDE.

Explanation

An END; DJDE is present in the job data.

FCB

The data stream converter found an FCB on record: nn. The current environment specifies: FCB_process | FCB_ignore.

Explanation

Infoprint XT found a LOAD FCB (forms control buffer; channel command X'63') in the input data stream. If the current environment is FCB=PROCESS, the FCB becomes effective immediately. Infoprint XT lists the new channel assignments and BOF after this message. If the current environment is FCB=IGNORE, Infoprint XT saves the FCB for possible use if the environment changes to FCB=PROCESS later in the job.

The data stream converter assigned FCB channel:
channel_num to line number:line_num.
⋮
The data stream converter assigned FCB channel:
channel_num to line number:line_num.
FCB bottom of form (BOF) line number is nn.

FCB

JDL: JDL_name | JDE: JDE_name specified no VFU channel assignments. The data stream converter uses the FCB found on record:nn instead.

Explanation

The environment is FCB=PROCESS and the invoked JDL/JDE specifies no channel assignments. The data stream converter uses the VFU channel assignments of the most recently found FCB. Infoprint XT lists the FCB channel assignments and BOF after this message.

The data stream converter assigned FCB channel:
channel_num to line number:line_num.
⋮
The data stream converter assigned FCB channel:
channel_num to line number:line_num.
FCB bottom of form (BOF) line number is nn.

FCB

The data stream converter uses the FCB on record: nn instead of the VFU of the starting JDL / JDE environment restored by an RSTACK.

Explanation

The environment is FCB=PROCESS and Infoprint XT found an RSTACK. Although the RSTACK has restored the environment of the starting JDL / JDE, the data stream converter uses the VFU channel assignments of the most recently found FCB. Infoprint XT lists the FCB channel assignments and BOF after this message.

The data stream converter assigned FCB channel:
channel_num to line number:line_num.
⋮
The data stream converter assigned FCB channel:
channel_num to line number:line_num.
FCB bottom of form (BOF) line number is nn.

FEED

The input tray is tray.

Explanation

Specifies whether the tray that contains the medium on which the job prints,tray, is AUXILIARY or MAIN.

FEED

The data stream converter does not support the tray_name option.

Explanation

When you specify xclb=none, Infoprint XT issues this message when it finds FEED DJDE values (tray_name) other than MAIN, AUX or OPR. It uses the MAIN input tray in the generated AFP. Verify that you specified the correct value for the xclb conversion parameter. Also, make sure that the value of the FEED command in the job is correct.

FEED

The input media source is tray mmc_tray.

Explanation

You specified a valid cluster database. Infoprint XT indicates the number of the input tray with mmc_tray.

FEED

The input media source is INIFEED tray mmc_tray.

Explanation

You specified a valid cluster database. Infoprint XT indicates the number of the input tray with mmc_tray. If Infoprint XT finds a STOCKS DJDE, but the DJDE packet does not specify FEED, it uses the INIFEED tray.

FONTINDEX

The data stream converter no longer uses table reference characters.

Explanation

Specifies that the job contains a FONTINDEX= NONE DJDE, and that the data stream converter no longer uses table reference characters to select fonts.

FONTINDEX

The data stream converter interprets input data bytes at offset: offset as table reference characters. The table reference characters number the fonts from: number and contain font references in the low-order: bits bits.

Explanation

Specifies that the job contains a FONTINDEX DJDE, and identifies the location and the numbering of the font indexes that the data stream converter uses.

FONTS

Font font_name does not meet naming requirements.

Explanation

The name of the Xerox font, font_name, is not in the correct format. Xerox font names must not exceed 6 characters and can include only uppercase alphabetic characters, numeric characters, and the dollar sign ($).

FONTS

The number of fonts listed is: number.

Explanation

Specifies the fonts that the job lists. The message text includes:

.fnt name:	AFP name:	Line spacing value:
`fnt_name`	`afp_name`	`x` inches or `y` pels
`fnt_name`	`afp_name`	`x` inches or `y` pels
⋮

fnt_name identifies the Xerox font name. afp_name identifies the corresponding AFP font name, which is either a coded font name or a character set and code page pair. x and y are numeric values.

FORMAT

font font_name does not meet naming requirements.

Explanation

FORMAT

The new page positions are:(x,y) inches or (x,y) pels

Explanation

A new PDE has changed the page positions at a specific offset in the job. The message lists the new positions.

FORMAT

The number of fonts listed is: number.

Explanation

Specifies the fonts that the job lists.

The message text includes:

.fnt name:	AFP name:	Line spacing value:
`fnt_name`	`afp_name`	`x` inches or `y` pels
`fnt_name`	`afp_name`	`x` inches or `y` pels
⋮

FORMAT

A DJDE referenced PDE pde_name. The PDE contains this information:

The print mode is mode.
The number of fonts listed was x.

Explanation

The job invoked a PDE. The message text includes:

.fnt name	AFP name(s)	line spacing value
`fnt_name`	`afp_name`	`x` inches or `y` pels
`fnt_name`	`afp_name`	`x` inches or `y` pels
⋮
`The new page position is (x,y) inches or (x,y) pels.`

pde_name identifies the name of the PDE. Infoprint XT indicates whether print mode, mode, for this PDE is LANDSCAPE or PORTRAIT. fnt_name identifies the name of the Xerox font. afp_name identifies the corresponding AFP font name, which is either a coded font name or a character set and code page pair. x and y are numeric values.

FORMS

Overlay overlay_name prints on the front of subsequent sheets.

Explanation

This message occurs when the job specifies FORMS. overlay_name identifies the AFP overlay that prints on the front of subsequent sheets.

FORMS

No overlay appears on the front of subsequent sheets.

Explanation

Specifies that no overlay prints on the front of subsequent pages. This might be an informational message, or it might indicate that an internal error exists in the job, such as two DJDE packets set to take effect at the same time.

FORMS

These overlays print on the front of subsequent sheets.

Explanation

The job specifies copy-sensitive forms and either SIMPLEX or FORM. The message text includes:

Overlay:	Copy ply:
`overlay_name1`	`x` to `y`
⋮
`overlay_nameN`	`x` to `y`

overlay_name1 through overlay_nameN identify the names of the AFP overlays. The Copy ply column lists the report copies on which the associated overlay prints. x and y are numeric values.

FORMS

Overlay overlay_name prints on both sides of subsequent sheets.

Explanation

The FORMS DJDE only specifies one form. overlay_name identifies the AFP overlay that prints on both sides of the sheet.

GRAPHIC

The data stream converter found graphic image img_name (page segment pseg_name) imbedded in data stream. The image position is (x,y) inches or (x,y) pels. The converter automatically prints the graphic on each page. The requested graphic scaling factor was number.

Explanation

img_name identifies the Xerox IMG file. pseg_name identifies the AFP page segment. x and y are numeric values. x represents the horizontal coordinate. y represents the vertical coordinate. Infoprint XT indicates whether it automatically prints the graphic on each page. Infoprint XT only includes the last sentence of the message when the scaling factor is a number other than 1.

IMAGE

A DJDE referenced graphic image img_name (page segment pseg_name). The image position is (x,y) inches or (x,y) pels. The converter automatically prints the graphic on each page. The requested graphic scaling factor was number.

Explanation

IMAGE

A DJDE referenced graphic image img_name (page segment pseg_name). The image position is (x,y) inches or (x,y) pels. The converter does not automatically print the graphic on each page. The requested graphic scaling factor was number.

Explanation

IMAGE

A DJDE referenced one or more BATCH mode graphic images. The converter automatically prints each graphic on a separate page at image position (x,y) inches or (x,y) pels. The requested graphic scaling factor was number.

Explanation

x and y are numeric values. x represents the horizontal coordinate. y represents the vertical coordinate. Infoprint XT only includes the last sentence of the message when the scaling factor is a number other than 1.

INVERT

The data stream converter ignores INVERT DJDEs because of conversion parameters in effect.

Explanation

The data stream converter found an INVERT DJDE, but the conversion parameters include xhonorinvert=no, which is the default. Infoprint XT does not invert the output.

INVERT

The data stream converter inverts output on the front sides of subsequent sheets.

Explanation

Specifies that front-side printing is inverted. Back-side printing is not inverted.

INVERT

The data stream converter inverts output on the back sides of subsequent sheets.

Explanation

Specifies that back-side printing is inverted. Front-side printing is not inverted.

INVERT

The data stream converter inverts output on both sides of subsequent sheets.

Explanation

Specifies that front-side and back-side printing is inverted.

INVERT

The data stream converter does not invert output on subsequent sheets.

Explanation

Specifies that front-side and back-side printing is not inverted.

ITEXT

The data stream converter does not support the ITEXT DJDE.

Explanation

An ITEXT DJDE, which Infoprint XT does not support, is present.

JDE

A DJDE referenced Job Descriptor Entry jde_name.

Explanation

The name of the JDE in use, which is jde_name.

JDL

A DJDE referenced Job Descriptor Library jdl_name.

Explanation

The name of the JDL file, which is jdl_name.

MARGIN

The left margin is position_count positions.

Explanation

Infoprint XT calculates the left margin by multiplying position_count by the average character width of the font in effect.

MARGIN

The left margin is x inches or y pels.

Explanation

This message occurs when the job specifies a left margin in terms of inches or centimeters, rather than positions.. x and y are numeric values. Infoprint XT uses pels as the unit of measure.

MODIFY

The data stream converter does not apply a CME to the input data.

Explanation

No copy modifications are in effect, starting at the point in the job where Infoprint XT found this DJDE.

MODIFY

The data stream converter applies CME cme_name to the input data.

Explanation

The input data invoked a CME that is not copy-sensitive to do copy modifications. cme_name identifies the name of the CME in effect.

MODIFY

The data stream converter applies these CMEs:

Explanation

The input data invoked one or more copy-sensitive CMEs to do copy modifications. The message text includes:

CME name	copy ply:
`cme_name`	`x` to `y`
⋮
`cme_name`	`x` to `y`

cme_name identifies the CME file. x and y are integer values.

NUMBER

The data stream converter does not number output pages.

Explanation

The job contains a NUMBER=NO DJDE. Infoprint XT does not number pages.

NUMBER

The data stream converter numbers output pages by using font: font_name. The first page number is: nn.

Explanation

The job contains a NUMBER DJDE that defines the numbering of the output pages. Infoprint XT report the location of the page number as line nn and column nn. nn is an integer value.

OVERPRINT

The data stream converter prints overprint lines.

Explanation

Specifies whether the OVERPRINT option is PRINT.

OVERPRINT

The data stream converter ignores overprint lines.

Explanation

Specifies whether the OVERPRINT option is IGNORE.

OVERPRINT

The data stream converter merges overprint lines.

Explanation

Specifies whether the OVERPRINT option is MERGE.

OVERPRINT

The data stream converter prints only the first line in each group of overprint lines.

Explanation

Specifies that the OVERPRINT option is PRINT2.

PMODE

The print mode is landscape.

Explanation

Specifies whether the print mode is landscape.

PMODE

The print mode is portrait.

Explanation

Specifies whether the print mode is portrait.

RAUX

The data stream converter selected the alternate paper source.

Explanation

Specifies that Infoprint XT pulls one sheet from the alternate paper tray.

RFORM

Overlay overlay_name prints on the front of routing text pages.

Explanation

Specifies that the AFP overlay overlay_name prints on all RTEXT pages.

ROFFSET

The data stream converter offsets the current sheet.

Explanation

An ROFFSET statement is present. Infoprint XT offsets the current sheet.

ROFFSET

The data stream converter offsets the current report.

Explanation

An ROFFSET statement is present. Infoprint XT offsets the current report.

RPAGE

The current logical page moves to the side of a new sheet.

Explanation

This message occurs when the job specifies RPAGE WHEN=TOP and the SIDE= parameter forces the start of a new sheet. side is the FRONT or BACK of a new sheet that the logical page moves to.

RPAGE

The current logical page moves to the back of the current sheet.

Explanation

This message occurs when a specification of SIDE=NEXT or SIDE=BACK forces output to the back of the current sheet.

RPAGE

The next logical page begins on the side of a new sheet.

Explanation

This message occurs when the job specifies RPAGE WHEN=BOTTOM and the SIDE= parameter forces the start of a new sheet. side is the FRONT or BACK of the sheet that the logical page begins on.

RPAGE

The next logical page begins on the back of the current sheet.

Explanation

This message occurs when a specification of SIDE=NEXT or SIDE=BACK does not force a new sheet.

RPAGE

The remaining text for the logical page moves to the side of a new sheet.

Explanation

This message occurs when the job specifies RPAGE WHEN=NOW and the SIDE= parameter forces the start of a new sheet. side is the FRONT or BACK of the new sheet that the remaining text moves to.

RPAGE

The remaining text for the logical page moves to the back of the current sheet.

Explanation

This message occurs when the job specifies RPAGE WHEN=NOW and the SIDE= parameter forces the start of a new sheet. The remaining text moves to the back of the new sheet.

RRESUME

Printing resumes. The RRESUME record prints.

Explanation

Specifies whether the current record prints when printing resumes.

RRESUME

Printing resumes. The RRESUME record does not print.

Explanation

Specifies whether the current record does not print when printing resumes.

RSTACK

The data stream converter found the end of the current report. The RSTACK record prints.

Explanation

The starting print environment is now in effect. The RSTACK record prints.

RSTACK

The data stream converter found the end of the current report. The RSTACK record does not print.

Explanation

The starting print environment is now in effect. The RSTACK record does not print.

RSUSPEND

The data stream converter suspends printing until it finds the end of report or an RRESUME record. The RSUSPEND record prints.

Explanation

Specifies whether print retention starts with the current record.

RSUSPEND

The data stream converter suspends printing until it finds the end of report or an RRESUME record. The RSUSPEND record does not print.

Explanation

Specifies that print retention does not start with the current record.

RTEXT

A DJDE provided this routing text information:

Explanation

copy_num identifies the report copy. The message text includes:

Report copy	line no.	column no.	Xerox font name	AFP name(s)
`copy_num`	`line_num`	`column_num`	`xrx_name`	`afp_name`
`copy_num`	`line_num`	`column_num`	`xrx_name`	`afp_name`
⋮
`text`

line_num identifies the line number of the report. column_num identifies the column number of the report. xrx_name identifies the name of the Xerox font. afp_name identifies either a coded font name or a code page and character set pair.

RTEXT

The report does not include routing text.

Explanation

The data stream converter found an RTEXT=NONE DJDE.

SAVE

The data stream converter does not support the SAVE DJDE.

Explanation

A SAVE DJDE, which Infoprint XT does not support, is present.

SEFFNT

The data stream converter does not support the SEFFNT DJDE.

Explanation

A SEFFNT DJDE, which Infoprint XT does not support, is present.

SEFMAP

The data stream converter does not support the SEFMAP DJDE.

Explanation

A SEFMAP DJDE, which Infoprint XT does not support, is present.

SHIFT

The data stream converter ignores SHIFT DJDEs because of conversion parameters in effect.

Explanation

The data stream converter found a SHIFT or XSHIFT DJDE, but the conversion parameters include xhonorshift=no, which is the default. Infoprint XT does not shift the output.

SHIFT

Printing on subsequent sheets does not shift to the left or right.

Explanation

The data stream converter found a SHIFT=NO DJDE, which prevents the output from shifting in the directions specified.

SHIFT

Printing on subsequent sheets does not shift up or down.

Explanation

The data stream converter found a SHIFT=NO DJDE, which prevents the output from shifting in the directions specified.

SHIFT

Printing on subsequent sheets does not shift on front sides, but shifts bk_inches inches (bk_pels pels) direction on back sides.

Explanation

A SHIFT DJDE specified that front-side printing does not shift, while back-side printing shifts bk_inches inches in the direction specified. The direction is:

to the left
to the right
up
down

SHIFT

Printing on subsequent sheets shifts fr_inches inches (ft_pels pels) direction on front sides, but does not shift on back sides.

Explanation

A SHIFT DJDE specified that back-side printing does not shift, while front-side printing shifts fr_inches inches in the direction specified. The direction is:

to the left
to the right
up
down

SHIFT

Printing on subsequent sheets shifts fr_inches inches (ft_pels pels) direction on front sides, and bk_inches inches (bk_pels pels) direction on back sides.

Explanation

A SHIFT DJDE specified that front-side printing shifts fr_inches inches and bk_inches inches on back sides, in the directions specified. The direction is:

to the left
to the right
up
down

SIDE

The current logical page begins on the side of a new sheet.

Explanation

The SIDE= specification forces the start of a new sheet. side is the FRONT or BACK of the sheet that the logical page begins on.

STOCKS

A DJDE specified STOCKSET stk_name.

Explanation

The message text includes:

Command	Stock Reference	Cluster Name	Media Source
INIFEED	`stk_ref`	`cl_name`	`mmc_tray`
SYSPAGE	`stk_ref`	`cl_name`	`mmc_tray`
ASSIGN	`stk_ref`	`cl_name`	`mmc_tray`

STOCKSET correlates each stock reference, stk_name, to a cluster name, cl_name. The reformatted cluster database in effect then correlates each cluster, cl_name, to an input media source tray, mmc_tray. INIFEED identifies the stock that Infoprint XT uses if no OUTPUT FEED or OUTPUT DJDE commands are in effect. SYSPAGE identifies the stock that Infoprint XT uses for Xerox system-generated pages, such as the accounting pages at the ends of reports. ASSIGN associates stock references with cluster names.

STOCKS

The data stream converter ignores the STOCKS DJDE.

Explanation

A STOCKS DJDE is present. However, the value of the xclb conversion parameter is none. Or, xclb is not present and Infoprint XT did not find the default clustr.alb in the reformatted Xerox resource directory. Verify that the xclb parameter has the correct value.

TOF

The new top of form (TOF) line number is number.

Explanation

Specifies the line number for the top of the form.

XMP

The data stream converter does not support the XMP DJDE.

Explanation

An XMP DJDE, which Infoprint XT does not support, is present.

XSHIFT

The data stream converter ignores XSHIFT DJDEs because of conversion parameters in effect.

Explanation

The data stream converter found a SHIFT or XSHIFT DJDE, but the conversion parameters include xhonorshift=no, which is the default. Infoprint XT does not shift the output.

XSHIFT

Printing on subsequent sheets does not shift to the left or right.

Explanation

Specifies that the data stream converter found an XSHIFT=NO DJDE, which prevents the output from shifting in the directions specified.

XSHIFT

Printing on subsequent sheets does not shift up or down.

Explanation

Specifies that the data stream converter found an XSHIFT=NO DJDE, which prevents the output from shifting in the directions specified.

XSHIFT

Printing on subsequent sheets does not shift on front sides, but shifts bk_inches inches (bk_pels pels) direction on back sides.

Explanation

An XSHIFT DJDE specified that front-side printing does not shift, while back-side printing shifts bk_inches inches in the direction specified. The direction is:

to the left
to the right
up
down

XSHIFT

Printing on subsequent sheets shifts fr_inches inches (ft_pels pels) direction on front sides, but does not shift on back sides.

Explanation

An XSHIFT DJDE specified that back-side printing does not shift, while front-side printing shifts fr_inches inches in the direction specified. The direction is:

to the left
to the right
up
down

XSHIFT

Printing on subsequent sheets shifts fr_inches inches (ft_pels pels) direction on front sides, and bk_inches inches (bk_pels pels) direction on back sides.

Explanation

An XSHIFT DJDE specified that front-side printing shifts fr_inches inches and bk_inches inches on back sides, in the directions specified. The direction is:

to the left
to the right
up
down