Before you start, you can set the preview chart on in panel M. You can
examine the chart full size (PF5) whenever necessary. After examining it,
go back to what you were doing (PF3), or return Home (PF12). Go to the
panels either by typing in the numbers and pressing ENTER on the Home
Panel, or by making a choice on the previous panel, (usually by answering
a YES/NO question).
- Panel
- Action taken
- 0.1
- Choose 10 to type in the data.
- 2.1
- Type in the data as shown in Figure 121. Press PF3.
- 0.1
- Choose 11 to type in the heading.
- 5.1
- Type in the heading. Press PF3 twice.
- 0.2
- Choose 2. Press ENTER, then choose 3.
- PF12
- To get to the Home Panel and add the finishing touches.
- 1.4
- Set Gap between Bars to -20. Set Gap between Sets of Bars to 80.
- 2.6
- Change the Shading Pattern to 0 for all three data groups.
- 2.7
- Change Symbol Set Name to ADMUUDRP, Character Width Multiplier to
1.5.
- 4.4.2
- Change X Label Attributes, Character Width Multiplier to 1.5.
Press PF6 for Y axis. Change Y Label Attributes, Character Width
Multiplier to 1.5.
Press PF2 and choose option 3 to save the chart or option 2 to clear the
data and format.
Figure 121. Data entry panel for sample bar chart
Figure 122. Sample bar chart
|