subscribe iconSubscribe to this information

Exchanging the RAID enablement card in the model 561 and 570

How to remove and replace the RAID enablement card.

To remove the RAID enablement card, perform the following procedure.

  1. Remove the I/O backplane (see Exchanging the I/O backplane in the model 561 and 570).
  2. Place the I/O backplane on a flat surface.
  3. Unlock the restraining pins (A) located at the top of the RAID enablement card bracket (B).
  4. Lift the RAID enablement card and bracket from the enclosure.
  5. To replace the RAID enablement card, reverse the steps in this removal procedure. This ends the procedure.
RAID enablement card removal
Parent topic: Removing and replacing parts in the model 9116-561, 9406-570, and 9117-570
Send feedback | Rate this page

Last updated: Fri, Oct 30, 2009