SNMP Items Available Using SNMP Get
Presents a table of OID trees that you can poll using SNMP Get.
- Only SNMP v2 is supported.
- If the server has two or more network interfaces, the SNMP request is sent only to the first network interface.
Simple Network Management Protocol (SNMP) collects information from network devices, such as servers, printers, hubs, switches, and routers on an Internet Protocol (IP). SNMP employs addresses for network devices using a hierarchical numbering system called Object Identifiers (OID). The table below provides OID addresses for polling in SNMP to monitor API Connect servers.
Each entry in the table represents many individual items. Use snmpwalk or another SNMP polling utility to see the complete list. You can poll the following OID trees:
| OID | SNMP Name | Notes |
|---|---|---|
| .1.3.6.1.2.1.1 |
SNMPv2-MIB::system |
|
| .1.3.6.1.2.1.2 |
IF-MIB::interfaces |
|
| .1.3.6.1.2.1.4 |
IP-MIB::ip |
|
| .1.3.6.1.2.1.5 |
IP-MIB::icmp. |
|
| .1.3.6.1.2.1.6 |
TCP-MIB::tcp |
|
| .1.3.6.1.2.1.7 |
UDP-MIB::udp |
|
| .1.3.6.1.2.1.11 | SNMPv2-MIB::snmp | |
| .1.3.6.1.2.1.25.1 |
HOST-RESOURCES-MIB::hrSystem |
Excluding .1.3.6.1.2.1.25.1.3
HOST-RESOURCES-MIB::hrSystemInitialLoadDevice Excluding .1.3.6.1.2.1.25.1.4 HOST-RESOURCES-MIB::hrSystemInitialLoadParameters |
| .1.3.6.1.2.1.25.2 |
HOST-RESOURCES-MIB::hrStorage |
|
| .1.3.6.1.2.1.25.3 |
HOST-RESOURCES-MIB::hrDevice |
|
| .1.3.6.1.4.1.2021.4 |
UCD-SNMP-MIB::memory |
|
| .1.3.6.1.4.1.2021.10 |
UCD-SNMP-MIB::laTable |
CPU Load Average |
| .1.3.6.1.4.1.2021.11 |
UCD-SNMP-MIB::systemStats |