BPX messages

BPXB001E
GROUP ID FOR group_name CANNOT BE OBTAINED. SAF RETURN CODE = saf_return_code, RACF® RETURN CODE = racf_rc, RACF REASON CODE = racf_rsn. TERMINAL GROUP OWNERSHIP WILL NOT BE UPDATED.
BPXB002E
OCS REQUIRES TCP/IP TO BE ACTIVE. START TCP/IP OR HAVE THE SYSTEM ADMINISTRATOR UNCONFIGURE THE OCS NODES.
BPXB003I
OCS text
BPXB004E
OCS HAS LOST ITS CONNECTION TO THE FOLLOWING NODE(S): ocsnodename [ , ocsnodename [ , ocsnodename [ , ocsnodename ] ] ]
BPXC001I
THE COMPONENT TRACE PARMLIB OPTION xxxxxxxx IS NOT VALID.
BPXC002I
THE CONTROL BLOCK ID cbid, SPECIFIED BY THE CBTR KEYWORD IS NOT SUPPORTED.
BPXC003I
THE OFFSET offset, SPECIFIED BY THE CBTR KEYWORD IS NOT SUPPORTED., 1. MAX LENGTH 4 HEX CHARS. 2. VALID OFFSET RANGE 0-FFFF HEX
BPXC004I
THE LENGTH length, SPECIFIED BY THE CBTR KEYWORD IS NOT SUPPORTED. 1. VALID LENGTH RANGE 1-8
BPXC005I
INVALID SYNTAX FOR THE trace_option COMMAND
BPXC006I
THE COMBINATION OF THE OFFSET AND LENGTH EXCEEDS THE LENGTH OF THE CONTROL BLOCK trace_option
BPXF001I
A FILE SYSTEM WITH FILESYSTYPE type FAILED TO INITIALIZE. THE SOFTWARE LEVEL IS INCORRECT.
BPXF002I
FILE SYSTEM name WAS NOT MOUNTED. RETURN CODE = return_code, REASON CODE = reason_code
BPXF003I
THE FILE SYSTEM DID NOT INITIALIZE. IT FAILED TO ESTABLISH AN ESTAE. RETURN CODE = return_code
BPXF004I
THE FILE SYSTEM DID NOT INITIALIZE. NO ROOT STATEMENT WAS FOUND IN PARMLIB MEMBER member-name.
BPXF005I
THE ROOT STATEMENT IN PARMLIB MEMBER member-name DID NOT SPECIFY A TYPE THAT MATCHES ANY FILESYSTYPE STATEMENT.
BPXF006I
A FILE SYSTEM WITH FILESYSTYPE type FAILED TO INITIALIZE. IT TERMINATED DURING INITIALIZATION.
BPXF007I
FILE SYSTEM name WAS NOT MOUNTED. FILE SYSTEM TYPE type, SPECIFIED IN member-name, IS NOT ACTIVE.
BPXF008I
FILE SYSTEM name WAS NOT MOUNTED. THE MOUNT POINT SPECIFIED IN member-name DOES NOT EXIST.
BPXF009I
FILE SYSTEM name WAS NOT MOUNTED. THE MOUNT POINT SPECIFIED IN member-name IS NOT A DIRECTORY.
BPXF010I
FILE SYSTEM name WAS NOT MOUNTED. THE MOUNT POINT SPECIFIED IN member-name ALREADY HAS A FILE SYSTEM MOUNTED ON IT.
BPXF011I
A FILE SYSTEM WITH FILESYSTYPE OR SUBFILESYSTYPE type FAILED TO INITIALIZE. A DUPLICATE FILESYSTYPE/SUBFILESYSTYPE STATEMENT WAS FOUND IN PARMLIB MEMBER member-name.
BPXF012I
NEITHER FILESYSTEM NOR DDNAME WAS SPECIFIED ON EITHER A MOUNT OR A ROOT STATEMENT IN PARMLIB MEMBER member-name.
BPXF013I
FILE SYSTEM name WAS SUCCESSFULLY MOUNTED.
BPXF014D
FILESYSTYPE type TERMINATED. REPLY 'R' WHEN READY TO RESTART.
BPXF015I
THE REPLY IS NOT VALID
BPXF016I
procname TERMINATING. THE ROOT FILE SYSTEM, FILESYSTYPE type, TERMINATED.
BPXF017I
procname TERMINATING. FILE SYSTEM, FILESYSTYPE type, TERMINATED.
BPXF018I
DEVICE DRIVER INITIALIZATION ROUTINE modname FAILED. RETURN CODE = return_code
BPXF019I
AN ABEND OCCURRED WHILE PROCESSING DEVICE DRIVER INITIALIZATION ROUTINE modname.
BPXF020I
FILE SYSTEM name MAY BE DAMAGED. RETURN CODE = return_code, REASON CODE = reason_code
BPXF022I
A FILE SYSTEM WITH FILESYSTYPE type FAILED TO INITIALIZE. THE FILE SYSTEM MUST RUN IN THE OMVS ADDRESS SPACE.
BPXF023I
FILE SYSTEM name SPECIFIED ON EITHER A MOUNT OR A ROOT STATEMENT IN PARMLIB MEMBER member-name MAY NOT BE MOUNTED ASYNCHRONOUSLY.
BPXF024I
text
BPXF025I
FILE SYSTEM name IS BEING MOUNTED.
BPXF026I
FILE SYSTEM name WAS ALREADY MOUNTED.
BPXF027I
FILE SYSTEM name MOUNT DELAYED BECAUSE MOUNT POINT mpname CANNOT BE RESOLVED. RETURN CODE = retcode, REASON CODE = reason
BPXF028I
FILE SYSTEM name WAS NOT MOUNTED. RETURN CODE = return_code, REASON CODE = reason_code
BPXF029E
ROOT FILE SYSTEM name WAS NOT MOUNTED. RETURN CODE = return_code, REASON CODE = reason_code
BPXF030I
MAXSOCKETS HAS BEEN REACHED FOR DOMAIN domain-name. REQUESTS FOR SOCKETS MAY BE DENIED.
BPXF031I
A FILE SYSTEM WITH SUBFILESYSTYPE type WAS INCORRECTLY SPECIFIED AS THE DEFAULT TRANSPORT DRIVER IN PARMLIB MEMBER member-name
BPXF032D
FILESYSTYPE type TERMINATED. REPLY 'R' WHEN READY TO RESTART. REPLY 'I' TO IGNORE.
BPXF033I
A FILESYSTEM WITH THE FILESYSTYPE OR SUBFILESYSTYPE NAME type FAILED TO INITIALIZE. THE MAXIMUM FILESYSTYPE OR SUBFILESYSTYPE STATEMENTS HAVE ALREADY BEEN PROCESSED. THE PARMLIB MEMBER PROCESSED AT THE TIME WAS member-name.
BPXF034I
THE FOLLOWING FILE SYSTEM HAS BEEN QUIESCED FOR MORE THAN 10 MINUTES: name
BPXF035I
timestamp MODIFY BPXOINIT,FILESYS=DISPLAY text
BPXF036I
MODIFY PROCESSING FOR BPXOINIT FILESYS FAILED. RETURN CODE = retcode, REASON CODE = reason.
BPXF037I
FILE SYSTEM name NOT FOUND.
BPXF038I
NO FILE SYSTEMS FOUND.
BPXF039I
FILE SYSTEM ANALYSIS IS DELAYED DUE TO CONTENTION FOR THE MOUNT LATCH, LATCH NUMBER latchnum.
BPXF040I
MODIFY BPXOINIT,FILESYS PROCESSING IS COMPLETE.
BPXF041I
timestamp MODIFY BPXOINIT,FILESYS=DISPLAY,GLOBAL text
BPXF042I
POSSIBLE CONTENTION FOR THE FILE SYSTEM MOUNT LATCH EXISTS ON SYSTEM system, LATCH NUMBER latchnum.
BPXF043I
AN SVC DUMP OF FILE SYSTEM RESOURCES IS BEING CAPTURED. THE DUMP TIMESTAMP=timestamp.
BPXF044I
THE FUNCTION DID NOT COMPLETE DUE TO ACTIVE LOCAL FILE SYSTEM RECOVERY.
BPXF045A
THE LOCAL SYSBPX MEMBER REPRESENTATION IS INCORRECT.
BPXF046I
FILE SYSTEM fsname AND ALL DEPENDENT FILE SYSTEMS ARE BEING UNMOUNTED.
BPXF047I
FILE SYSTEM fsname AND ALL DEPENDENT FILE SYSTEMS COULD NOT BE UNMOUNTED.
BPXF048I
A CORRECTIVE ACTION WAS PERFORMED TO THE FILE SYSTEM HIERARCHY: action DIAGNOSTIC DATA = eventdata
BPXF049I
type PROCESSING FOR FILE SYSTEM fsname REQUIRES RESPONSES FROM THE FOLLOWING SYSTEMS: sysnames
BPXF050I
THE FIX FUNCTION DID NOT PERFORM ALL ANALYSIS DUE TO CONTINUOUS SERIALIZATION TIMEOUTS.
BPXF051I
THE MODIFY FUNCTION CANNOT BE PERFORMED BECAUSE ALL SYSTEMS ARE NOT AT A COMPATIBLE SOFTWARE LEVEL.
BPXF052I
THE REPRESENTATION FOR SYSTEM sysname IS INCONSISTENT. FIX PROCESSING ENDS PREMATURELY.
BPXF053I
UNMOUNT PROCESSING FOR FILE SYSTEM fsname IS DELAYED. FIX PROCESSING CONTINUES.
BPXF054I
THE MODIFY FUNCTION CANNOT BE PERFORMED AT THIS TIME.
BPXF055I
MODIFY PROCESSING FOR FILESYS=FIX IS COMPLETE. status CHECK THE HARD COPY LOG OF EACH SYSTEM FOR CORRECTIVE ACTIONS TAKEN.
BPXF056I
UNMOUNT PROCESSING FOR FILE SYSTEM fsname IS COMPLETE. FIX PROCESSING CONTINUES.
BPXF057I
POSSIBLE LATCH CONTENTION EXISTS ON SYSTEM system FOR FILE SYSTEM fsname, LATCH NUMBER latchnum.
BPXF058I
THE FIX FUNCTION IS BEING RESTARTED DUE TO A SERIALIZATION TIMEOUT.
BPXF059I
type PROCESSING IS DELAYED. RESPONSES ARE REQUIRED FROM THE FOLLOWING SYSTEMS: sysnames
BPXF060I
LOGGED BY SYSLOGD FROM A {LOCAL|REMOTE} SOURCE text [xxxx BYTES OF INPUT DATA HAS BEEN TRUNCATED]
BPXF062I
WAITING FOR THE FOLLOWING SYSTEM(S) TO COMPLETE activity: syslist
BPXF063I
FILE SYSTEM name WAS SUCCESSFULLY UNMOUNTED.
BPXF064I
MODIFY BPXOINIT,FILESYS=REINIT TIMED OUT BEFORE ALL SYSTEMS COMPLETED.
BPXF065I
THE FILESYSTEM CANNOT BE UNMOUNTED BECAUSE IT CONTAINS MOUNTPOINTS FOR OTHER FILESYSTEMS. THOSE FILESYSTEMS MUST BE UNMOUNTED FIRST.
BPXF066I
MODIFY COMMAND PROCESSING TIMED OUT.
BPXF067I
AN SVC DUMP OF FILE SYSTEM RESOURCES ENDED WITH REASON CODE = sdumpx_rsn_code
BPXF068I
THE REPRESENTATION FOR SYSTEM sysname IS INCONSISTENT. FIX PROCESSING CONTINUES.
BPXF076I
FILE SYSTEM INITIALIZATION IS DELAYED DUE TO CONFLICTING ACTIVITY ON ANOTHER SYSTEM.
BPXF077S
SYSTEM sysname WAS PARTITIONED OUT OF THE SYSPLEX BECAUSE THE SOFTWARE SERVICE LEVEL IS INCOMPATIBLE WITH THIS SYSTEM.
BPXF078W
THIS SYSTEM CANNOT EXECUTE IN THE ACTIVE SHARED FILE SYSTEM CONFIGURATION. THE SOFTWARE SERVICE LEVEL OF SYSTEM sysname IS INCOMPATIBLE WITH THIS SYSTEM.
BPXF079S
UNIX SYSTEM SERVICES CANNOT EXECUTE IN THE ACTIVE SHARED FILE SYSTEM CONFIGURATION. THE SOFTWARE SERVICE LEVEL OF ONE OR MORE SYSTEMS IS INCOMPATIBLE WITH THIS SYSTEM.
BPXF080I
THE SOFTWARE SERVICE LEVEL OF THE FOLLOWING SYSTEMS ARE INCOMPATIBLE WITH THIS SYSTEM:sysname sysname sysname sysname
BPXF083I
THE FOLLOWING FILE SYSTEM HAS BEEN QUIESCED FOR MORE THAN 10 MINUTES: filesys_name QUIESCING SYSTEM=sysname JOB=jobname PID=pid LATCH=latnum
BPXF084I
NONPRIVILEGED USER MOUNT FAILED FOR FILE SYSTEM filesys RETURN CODE = retcode REASON CODE = rsncode
BPXF101E
RETURN CODE return_code RECEIVED DURING PARSING OF THE COMMAND.
BPXF102E
MVS PDS OR PDSE WITH DDNAME ddname WAS SPECIFIED FOR EITHER INPUT OR OUTPUT. A MEMBER NAME IS REQUIRED.
BPXF103E
RETURN CODE return_code WAS RECEIVED DURING AN ATTEMPT TO OBTAIN STORAGE FOR A BUFFER.
BPXF104E
AN ERROR OCCURRED DURING THE OPENING OF AN MVS DATA SET WITH DDNAME ddname.
BPXF105E
RETURN CODE return_code, REASON CODE reason_code. AN ERROR OCCURRED DURING THE OPENING OF HFS FILE pathname.
BPXF106E
RETURN CODE return_code, REASON CODE reason_code. AN ERROR OCCURRED DURING THE WRITING TO HFS FILE pathname.
BPXF107E
THE RECORD FORMAT OF THE INPUT DATA SET WITH DDNAME ddname IS NOT VALID.
BPXF108E
THE RECORD FORMAT OF THE OUTPUT DATA SET WITH DDNAME ddname IS NOT VALID.
BPXF110E
RETURN CODE return_code, REASON CODE reason_code. AN ERROR OCCURRED WHILE READING FROM HFS FILE pathname.
BPXF111E
COPY FAILED. RETURN CODE return_code WAS RECEIVED DURING THE COPY.
BPXF112W
THE RECORD SIZE IN THE OUTPUT DATA SET IS SMALLER THAN A LINE IN THE INPUT FILE. SOME RECORDS HAVE BEEN TRUNCATED.
BPXF113W
THE LOAD MODULE COPIED IS NOT A PROGRAM OBJECT AND MAY NOT BE EXECUTABLE.
BPXF114E
REASON CODE reason_code RECEIVED WHILE ATTEMPTING TO LOAD CONVERSION TABLE tabname.
BPXF115E
AN ERROR OCCURRED DURING THE OPENING OF LIBRARY DATA SET name FOR THE CONVERT FUNCTION.
BPXF116E
RETURN CODE return_code RECEIVED DURING THE SET UP OF THE RECOVERY ENVIRONMENT.
BPXF117E
THE LENGTH OF THE CONVERSION TABLE IS TOO SHORT.
BPXF118W
NO DATA CONVERSION IS PERFORMED. EITHER THE TO1047 OR THE FROM1047 KEYWORD IS REQUIRED FOR THIS CONVERT OPERATION.
BPXF119W
THE RECORD SIZE IN THE OUTPUT DATA SET IS SMALLER THAN THAT OF THE INPUT DATA SET. SOME RECORDS HAVE BEEN TRUNCATED.
BPXF120E
AN ERROR OCCURRED DURING THE OPENING OF MVS DATA SET dsname.
BPXF121E
THE RECORD FORMAT OF DATA SET dsname IS INCORRECT.
BPXF123E
AN HFS FILE CANNOT BE COPIED TO ITSELF.
BPXF124E
THE DATA SET NAME IS MISSING.
BPXF125E
EITHER THE PATHNAME IS MISSING, OR QUOTES ARE MISSING AROUND IT.
BPXF126E
MVS PDS OR PDSE name WAS SPECIFIED AS THE INPUT DATA SET. A MEMBER NAME IS REQUIRED.
BPXF127E
AN ERROR OCCURRED DURING THE OPENING OF MEMBER memname IN MVS DATA SET dsname.
BPXF128E
AN ERROR OCCURRED DURING THE OPENING OF AN MVS DATA SET.
BPXF129E
MVS PDS OR PDSE name WAS SPECIFIED AS THE OUTPUT FILE. A MEMBER NAME IS REQUIRED.
BPXF130E
A PARTITIONED DATA SET MUST EXIST PRIOR TO COPYING. A NEW PARTITIONED DATA SET IS NOT DYNAMICALLY ALLOCATED.
BPXF131E
AN HFS DATA SET IS NOT SUPPORTED FOR EITHER THE SOURCE OR THE TARGET.
BPXF132E
THERE IS A RECORD FORMAT ERROR FOR MVS DATA SET name. EITHER THE OUTPUT RECORD FORMAT IS UNDEFINED FOR A TEXT INPUT FILE, OR THE OUTPUT RECORD FORMAT IS NOT VALID.
BPXF134E
RETURN CODE return_code, REASON CODE reason_code. AN ERROR OCCURRED DURING THE CREATION OF DIRECTORY pathname.
BPXF135E
RETURN CODE return_code, REASON CODE reason_code. THE MOUNT FAILED FOR FILE SYSTEM fsname.
BPXF136E
A MEMBER NAME MUST NOT BE SPECIFIED FOR A FILE SYSTEM.
BPXF137E
RETURN CODE return_code, REASON CODE reason_code. THE UNMOUNT FAILED FOR FILE SYSTEM fsname.
BPXF138E
RETURN CODE return_code, REASON CODE reason_code. AN ERROR OCCURRED CREATING FILE pathname.
BPXF139E
COPYING OF A LOAD MODULE BETWEEN A PDS AND A PDSE IS NOT SUPPORTED.
BPXF140E
RETURN CODE return_code, REASON CODE reason_code. A LINK FAILED FOR LINK NAME linkname.
BPXF141E
COPYING FROM A DATA SET TO ANOTHER DATA SET IS NOT SUPPORTED.
BPXF142E
COPYING FROM AN HFS FILE TO ANOTHER HFS FILE IS NOT SUPPORTED.
BPXF143E
COPYING FROM AN HFS FILE TO A DATA SET IS NOT SUPPORTED.
BPXF145E
AN ELEMENT NAME IS REQUIRED INPUT TO BPXCOPY.
BPXF146E
AN INPUT FILE CONTAINING NULL LINES CANNOT BE COPIED TO A VBA OR VBM DATA SET.
BPXF147E
READ-ONLY IS SPECIFIED IN THE PATHOPTS FOR THE OUTPUT FILE. USE PATHOPTS(OVERRIDE) TO OVERRIDE THE PATHOPTS IF DESIRED.
BPXF148E
WRITE-ONLY IS SPECIFIED IN THE PATHOPTS FOR THE INPUT FILE. USE PATHOPTS(OVERRIDE) TO OVERRIDE THE PATHOPTS IF DESIRED.
BPXF150I
MVS DATA SET WITH DDNAME ddname SUCCESSFULLY COPIED INTO type HFS FILE pathname.
BPXF151I
BPXCOPY WAS INVOKED FOR HEAD ID headid.
BPXF152W
THE INPUT FILE SPECIFIED IS A DIRECTORY.
BPXF153W
NO DATA HAS BEEN COPIED. THE INPUT FILE CONTAINS ZERO BYTES OF DATA.
BPXF154E
DATA SET OF VARIABLE SPANNED RECORD FORMAT IS NOT SUPPORTED.
BPXF155E
PATHMODE SPECIFIED HAS INCORRECT VALUES.
BPXF156E
RETURN CODE return_code, REASON CODE reason_code. PATHMODE COULD NOT BE SET FOR FILE pathname.
BPXF157E
RETURN CODE return_code RECEIVED DURING STACKING OF THE MESSAGE OUTPUT DATA SET WITH DDNAME ddname.
BPXF158E
RETURN CODE return_code RECEIVED DURING THE STACK DELETE OF THE MESSAGE OUTPUT DATA SET ELEMENT FOR DDNAME ddname.
BPXF159E
cmdname ABENDED. SYSTEM COMPLETION CODE syscompcode.
BPXF160E
RETURN CODE return_code, REASON CODE reason_code, OBTAINING STATUS OF THE MOUNT POINT.
BPXF161I
ASYNCHRONOUS MOUNT IS IN PROGRESS FOR FILE SYSTEM fsname.
BPXF162E
ASYNCHRONOUS MOUNT FAILED FOR FILE SYSTEM fsname.
BPXF163E
USER NAME username IS NOT DEFINED.
BPXF164E
UID uid IS NOT DEFINED.
BPXF165E
GROUP NAME groupname IS NOT DEFINED.
BPXF166E
GID gid IS NOT DEFINED.
BPXF167E
RETURN CODE return_code, REASONCODE reason_code, UID and GID COULD NOT BE SET FOR FILE pathname.
BPXF168E
RETURN CODE return_code, REASONCODE reason_code, UID and GID COULD NOT BE SET FOR SYMLINK pathname.
BPXF169E
SYMPATH VALUE IS MISSING FOR SYMLINK pathname.
BPXF170E
RETURN CODE return_code, REASON CODE reason_code. A SYMLINK FAILED FOR LINK NAME linkname.
BPXF171E
RETURN CODE return_code, REASON CODE reason_code. CANNOT REPLACE EXISTING SYMLINK linkname.
BPXF172E
CANNOT REPLACE EXISTING SYMLINK linkname.
BPXF173E
RETURN CODE return_code, REASON CODE reason_code. attr ATTRIBUTE CANNOT BE SET FOR FILE pathname.
BPXF174E
RETURN CODE return_code, REASON CODE reason_code, OBTAINING STATUS OF FILE pathname.
BPXF175E
THE attr ATTRIBUTE WAS NOT SET FOR FILE pathname.
BPXF176E
SYMLINK VALUE IS MISSING FOR SYMPATH pathname.
BPXF177I
THE CALL TO GETPWUID FAILED FOR UID uid. THE FAILING RETURN CODE IS retcode, AND THE REASON CODE IS reasoncode.
BPXF178I
FILE pathname WAS SUCCESSFULLY COPIED INTO FILE pathname.
BPXF201I
DOMAIN domain-name WAS NOT ACTIVATED. FILE SYSTEM TYPE type, SPECIFIED IN member-name, IS NOT ACTIVE.
BPXF202I
DOMAIN domain-name WAS NOT ACTIVATED FOR FILE SYSTEM TYPE type. RETURN CODE = return_code, REASON CODE = reason_code
BPXF203I
DOMAIN domain-name WAS SUCCESSFULLY ACTIVATED.
BPXF204I
TCP/IP ROUTING INFORMATION UNAVAILABLE FOR TRANSPORT DRIVER tdname. RETURN CODE = return_code, REASON CODE = reason_code.
BPXF205I
UNABLE TO ESTABLISH A CONNECTION TO TRANSPORT DRIVER tdname FOR ROUTING INFORMATION. RETURN CODE = return_code , REASON CODE = reason.
BPXF206I
ROUTING INFORMATION FOR TRANSPORT DRIVER tdname HAS BEEN INITIALIZED OR UPDATED.
BPXF207I
ROUTING INFORMATION HAS BEEN DELETED FOR TRANSPORT DRIVER tdname.
BPXF210I
A BIND REQUEST COULD NOT BE PROCESSED. NO PORT 0, INADDR_ANY PORTS WERE RESERVED.
BPXF211I
A DUPLICATE NETWORK STATEMENT WAS FOUND FOR DOMAINNAME domain-name. THE DUPLICATE ENTRY WAS FOUND IN PARMLIB MEMBER member-name AND SPECIFIED A TYPE OF type. THE DUPLICATE WAS IGNORED
BPXF212I
NEITHER INADDRANYPORT NOR INADDRANYCOUNT WAS SPECIFIED ON THE NETWORK COMMAND FOR TYPE type IN MEMBER member-name. THESE VALUES HAVE BEEN DEFAULTED TO INADDRANYPORT(63000) AND INADDRANYCOUNT(1000).
BPXF213E
FILE SYSTEM name IS NO LONGER ACCESSIBLE.
BPXF214E
UNIX SYSTEM SERVICES IS UNABLE TO ACCESS ITS COUPLE DATA SET. THE DATA SET IS NOT AVAILABLE.
BPXF215E
UNIX SYSTEM SERVICES IS UNABLE TO ACCESS ITS COUPLE SET. AN ATTEMPT TO READ FROM THE DATA SET ENDED WITH A RETURN CODE OF retcode AND A REASON CODE OF reason.
BPXF216E
FILE SYSTEM PARTITION CLEANUP IS DELAYED DUE TO text
BPXF217E
FILE SYSTEM PARTITION CLEANUP FAILED DUE TO text
BPXF218I
ONE OR MORE FILE SYSTEMS DID NOT MOUNT DUE TO INCONSISTENT FILESYSTYPE STATEMENTS.
BPXF219I
A SOCKETS PORT ASSIGNMENT CONFLICT EXISTS BETWEEN UNIX SYSTEM SERVICES AND name.
BPXF220
ALL OF THE RESERVED SOCKET PORTS ARE IN USE.
BPXF220I
ALL OF THE RESERVED SOCKET PORTS ARE IN USE.
BPXF221I
FILE SYSTEM name FAILED TO MOUNT LOCALLY RETURN CODE =xxxxxxxx, REASON CODE = yyyyyyyy. THE FILE SYSTEM IS ACCESSIBLE ON THIS SYSTEM THROUGH A MOUNT ON A REMOTE SYSTEM.
BPXF222E
UNIX SYSTEM SERVICES IS UNABLE TO OBTAIN COUPLE DATA SET SERIALIZATION.
BPXF223I
THE address_space_type ADDRESS SPACE, a_name, DID NOT START BECAUSE THE ASCRE MACRO ENDED WITH DECIMAL RETURN CODE return_code AND DECIMAL REASON CODE reason_code.
BPXF224I
THE RESOLVER_PROC, a_name, IS BEING STARTED.
BPXF225I
THE RESOLVER_PROC, a_name, WAS NOT STARTED. THERE IS NO AF_INET OR AF_INET6 DOMAIN TO SUPPORT THE RESOLVER FUNCTION.
BPXF226E
UNIX SYSTEM SERVICES HAS REJECTED text
BPXF227I
SOCKET FILE SYSTEM sockname WITH ENTRYPOINT entry IS NO LONGER NECESSARY AND WILL NOT BE ACTIVATED.
BPXF228I
ERROR CREATING DIRECTORY FOR PATHNAME pathname RETURN CODE= rc REASON CODE=rsn.
BPXF229I
PHYSICAL FILE SYSTEM type IS NOW RECYCLING.
BPXF230I
BPXF230I UNIX SYSTEM SERVICES HAS REJECTED ALTERNATE COUPLE DATA SET data set name ON VOLUME volume name. THE COUPLE DATA SET VERSION IS alternate version. THE ACTIVE PRIMARY COUPLE DATA SET VERSION is primary version.
BPXF232E
ERROR MOVING FILE SYSTEM fsname FILE filename INODE inodeno RETURN CODE = retcode, REASON = reason
BPXF236I
FILE SYSTEM failed_filesysname WAS NOT MOUNTED. THE MOUNT POINT SPECIFIED IN member-name ALREADY HAS FILE SYSTEM mounted_filesysname MOUNTED ON IT.
BPXF237I
FILE SYSTEM filesysname WAS ALREADY MOUNTED ON PATHNAME pathname.
BPXF242I
timestamp MODIFY BPXOINIT,FILESYS=DISPLAY,GLOBAL text
BPXF243E
F OMVS,NEWROOT COMMAND HAS BEEN TERMINATED DUE TO THE FOLLOWING REASON(S): text
BPXF244E
F OMVS,NEWROOT COMMAND FAILED. RETURN CODE=retcode REASON CODE=rsncode
BPXF245I
LIST OF ACTIVITIES IN THE CURRENT SYSPLEX ROOT FILE SYSTEM: Path Name: pathname INODE: InodeNumber
BPXF246I
THE SYSPLEX ROOT FILE SYSTEM MIGRATION PROCESSING COMPLETED SUCCESSFULLY.
BPXF247I
SYSPLEX ROOT MOUNT PARMS ARE DROPPED ON REPLACEMENT.
BPXF248I
THE NEW SYSPLEX ROOT FILE SYSTEM IS MISSING THE FOLLOWING MOUNT POINT: NAME: filesysname PATH: pathname
BPXF249I
THE MOUNT POINT PATH FOR THE FOLLOWING FILE SYSTEM EXCEEDS THE MAXIMUM LENGTH:NAME: filesysname
BPXF250I
AUTOMOUNT FACILITY CANNOT UNMOUNT FILE SYSTEM fsname RETURN CODE=rc REASON CODE=rs.
BPXF251I
FILE SYSTEM fsname HAS BEEN RECOVERED AND IS NOW ACTIVE.
BPXF252I
ALTROOT FILE SYSTEM fsname WAS NOT MOUNTED. RETURN CODE=retcode, REASON CODE=rsncode
BPXF253E
ALTROOT INACTIVE:reason
BPXF254I
ALTROOT STATEMENT IN PARMLIB MEMBER ONLY VALID IN SHARED FILE SYSTEM ENVIRONMENT.
BPXF255I
ALTROOT NONE PARMLIB STATEMENT SUCCESSFULLY PROCESSED ON THIS SYSTEM.
BPXF256I
fsname IS NOW ACTIVE AS CURRENT SYSPLEX ROOT.
BPXF257I
SYSPLEX ROOT REPLACEMENT FAILED: RETURN CODE = return_code REASON CODE = reason_code
BPXF258I
SYSPLEX ROOT REPLACEMENT FAILED.
BPXF259I
ALTROOT FAILED TO MOUNT ON THIS SYSTEM. RETURN CODE=retcode REASON CODE=rsncode
BPXF260I
AUTOMOUNT POLICY WAS CHANGED AT timestamp BY USER userid ON SYSTEM sysname WITH POLICY pathname.
BPXF261I
AUTOMOUNT POLICY WAS CHANGED AT timestamp BY A MEMBER SYSTEM RUNNING AT A PRIOR RELEASE OF zOS
BPXF262I
TAKEOVER RECOVERY FAILED FOR filesystem name RETURN CODE =xxxxxxxx REASON CODE =xxxxxxxx
BPXF263I
FILE SYSTEM fsname HAS BEEN MOUNTED ON A NON-EMPTY DIRECTORY
BPXF265I
RECORDING FOR SMF TYPE 92 SUBTYPE 17 HAS BEEN DISABLED
BPXF266E
THE NUMBER OF ACTIVE PIPES HAS REACHED THE SYSTEM LIMIT
BPXF267I
SYSPLEX ROOT REPLACEMENT PROCESSING IS CONVERTING FILE SYSTEM fsname
BPXF268I
SYSPLEX ROOT REPLACEMENT PROCESSING HAS COMPLETED CONVERTING ALL FILE SYSTEMS.
BPXF269I
LOAD FAILED FOR CSNERNG WITH RETURN CODE = retcode REASON CODE = rsncode
BPXF270I
THE MAXPIPEUSER LIMIT OF <nnnn> HAS BEEN REACHED BY USER <cccccccc>, UID= <nnnnnnnnnn>
BPXF271I
FILE SYSTEM filesysname FAILED TO UNMOUNT BECAUSE IT CONTAINS MOUNTPOINT DIRECTORIES FOR ONE OR MORE OTHER FILE SYSTEMS WHICH MUST BE UNMOUNTED FIRST, INCLUDING FILE SYSTEM childfilesysname
BPXF272I
THE FILESYSTEM FAILED TO UNMOUNT BECAUSE IT CONTAINS MOUNTPOINTS FOR ONE OR MORE OTHER FILE SYSTEMS WHICH MUST BE UNMOUNTED, INCLUDING FILE SYSTEM childfilesysname
BPXF273I
FILE SYSTEM <filesysname> HAS MOVED FROM <oldsystemname> TO <newsystemname>
BPXF274I
FILE SYSTEM <filesysname> FAILED TO MOUNT. RETURN CODE = <returncode>, REASON CODE = <reason code>
BPXF275E
PFS RECOVERY COULD NOT COMPLETE FOR PROCESS pid ASID asid. PFSES WHICH MAY HAVE LOST RESOURCES INCLUDE: pfsname pfsname
BPXF276I
A PRIOR VERSION FILE SYSTEM SUBTREE filesysname IS BEING UNMOUNTED.
BPXF277I
A PRIOR VERSION FILE SYSTEM SUBTREE filesysname EXCEEDED THE MAXIMUM NUMBER OF UNMOUNT ATTEMPTS.
BPXF278I
A PRIOR VERSION FILE SYSTEM SUBTREE filesysname WAS NOT UNMOUNTED AT ATTEMPT attempt_number, BECAUSE FILE SYSTEM filesysname2 WAS BUSY.
BPXF279I
A PRIOR VERSION FILE SYSTEM SUBTREE filesysname WAS NOT UNMOUNTED AT ATTEMPT attempt_number, BECAUSE FILE SYSTEM filesystem2 FAILED TO UNMOUNT. RETURN CODE = return_code, REASON CODE = reason_code
BPXF280I
A PRIOR VERSION FILE SYSTEM SUBTREE filesysname WAS NOT UNMOUNTED AT ATTEMPT attempt_number, BECAUSE USE OF THE VERSION FILE SYSTEM RESUMED.
BPXF281I
FILE SYSTEM MIGRATION SUCCESSFULLY RENAMED SOURCE FILE SYSTEM from old_dsname TO new dsnameFILE SYSTEM IS MOUNTED WITH NAME OF target dsname
BPXF282I
FILE SYSTEM MIGRATION SUCCESSFULLY RENAMED TARGET FILE SYSTEM from old_dsname TO new dsnameFILE SYSTEM IS MOUNTED WITH NAME OF target dsname
BPXF283E
FILE SYSTEM MIGRATION FAILED TO RENAME SOURCE FILE SYSTEM from old_dsname TO new dsnameRETURN CODE = return_code, REASON CODE = reason_code FILE SYSTEM IS MOUNTED with name of target dsname
BPXF284E
FILE SYSTEM MIGRATION FAILED TO RENAME TARGET FILE SYSTEM from old_dsname TO new dsnameRETURN CODE = return_code, REASON CODE = reason_code FILE SYSTEM IS MOUNTED with name of target dsname
BPXF285E
THE UNOWNED FILE SYSTEM dsname CANNOT BE RECOVERED TO fstypeRETURN CODE = return_code, REASON CODE = reason_code
BPXF286I
THE FILE SYSTEM BEING MIGRATED WAS RECOVERED TO dsname
BPXF900I
COLONY PHYSICAL FILE SYSTEM WITH FILESYSTYPE type COULD NOT BE STARTED. COLONY PFS SUPPORT REQUIRES OMVS FORK SERVICES.
BPXF901I
ERROR CREATING DIRECTORY dirname RETURN CODE =retcode REASON CODE =rsncode
BPXF902I
dirname CANNOT BE CREATED BECAUSE FILE SYSTEM filesys IS MOUNTED IN READ-ONLY MODE
BPXF903I
THE ATTRIBUTE RETRIEVAL CALL (IGWASMS) FOR FILE SYSTEM fsname FAILED. RC = retcode, RSN = rsncode, DIAG = diagcode
BPXF904I
THE SPECIFIED PARAMETER STRING ON THE MOUNT STATEMENT OR COMMAND FOR FILE SYSTEM fsname HAS BEEN IGNORED. THE SPECIFIED FILE SYSTEM TYPE IS fstype BUT THE ACTUAL TYPE IS actualfstype.
BPXF905I
REMOUNT FAILED FOR FILE SYSTEM fsname.
BPXF906I
FILE SYSTEM fsname IS NOT ACTIVE. RETURN CODE = retcode, REASON CODE = rsncode
BPXI002I
procname IS ALREADY ACTIVE
BPXI003I
OPENMVS MUST BE STARTED AS A STARTED TASK, JOB jobname IGNORED
BPXI004I
procname INITIALIZATION COMPLETE
BPXI005I
procname TERMINATION IS COMPLETE
BPXI006I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number. INPUT PARAMETER VALUE IS OUT OF THE ALLOWED RANGE OF minimum-number TO maximum-number. A SYSTEM VALUE OF parm-value IS USED. DETECTING MODULE IS detmod. INPUT LINE: input-line
BPXI007I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number. text
BPXI009I
ERROR IN PARMLIB MEMBER=memname ON LINE line-number, POSITION position-number. INPUT KEYWORD VALUE IS INCORRECT. INPUT DATA LENGTH OF FROM minimum-length TO maximum-length CHARACTERS IS EXPECTED. DETECTING MODULE IS detmod. INPUT LINE: input-line
BPXI010I
ERROR IN PARMLIB MEMBER=memname ON LINE line-number, POSITION position-number. REQUIRED KEYWORD -- keyword-name -- IS MISSING FROM THE parm-name PARAMETER. DETECTING MODULE IS detmod. INPUT LINE: input-line
BPXI011I
ERROR IN PARMLIB MEMBER=memname ON LINE line-number, POSITION position-number. KEYWORDS keyword-name1 AND keyword-name2 ARE MUTUALLY EXCLUSIVE FOR THE parm-name PARAMETER. ONLY ONE OF THE KEYWORDS CAN BE SPECIFIED, NOT BOTH. DETECTING MODULE IS detmod. INPUT LINE: input-line
BPXI012I
ERRORS IN PARMLIB MEMBER=memname, REFER TO HARDCOPY LOG.
BPXI013I
INPUT PARAMETER FOR THE START jobname COMMAND IS INCORRECT. PARAMETER MUST BE NO MORE THAN 2 CHARACTERS. INPUT PARAMETER: OMVS=memname-suffix
BPXI014I
ERRORS FOUND IN PROCESSING PARMLIB MEMBER memname. UNEXPECTED RETURN CODE return_code FROM IEEMB878.
BPXI015I
procname CANNOT BE STARTED. OPENMVS IS IN TERMINATION.
BPXI016I
procname IS BEGINNING TO TERMINATE
BPXI017I
THE /ETC/INIT PROCESS COULD NOT BE INITIATED. system_call RETURN CODE return_code REASON CODE reason_code
BPXI018I
THE /ETC/INIT PROCESS ENDED IN ERROR, EXIT STATUS exit_status
BPXI019E
procname DETECTED A SEVERE INTERNAL ERROR THAT WILL REQUIRE A RE-IPL TO CORRECT
BPXI019I
procname IS TERMINATING DUE TO AN ERROR IN A KERNEL FUNCTION
BPXI020I
procname IS TERMINATING BECAUSE THE INIT PROCESS (PID = 1) HAS ENDED
BPXI021I
AN ERROR OCCURRED WHILE SEARCHING FOR SYSTEM MODULE = modulename. UNEXPECTED RETURN CODE return_code FROM CSVQUERY.
BPXI022I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number. text
BPXI023I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number. INPUT PARAMETER VALUE IS OUT OF THE ALLOWED RANGE OF minimum-number TO maximum-number. THE VALUE IS IGNORED.
BPXI024I
ERROR IN PARMLIB MEMBER=memname ON LINE line-number, POSITION position-number. INPUT KEYWORD VALUE IS INCORRECT. THE FIRST CHARACTER MUST BE ALPHABETIC.
BPXI025I
ERROR IN PARMLIB MEMBER=memname ON LINE line-number. PARTITIONED DATASET IS INCORRECT. REASON: text
BPXI026I
THE ETCINIT JOB COULD NOT BE STARTED. system_call RETURN CODE return_code REASON CODE reason_code
BPXI027I
THE ETCINIT JOB ENDED IN ERROR, EXIT STATUS exit_status
BPXI028E
UNIX SYSTEM SERVICES ARE NOT AVAILABLE.
BPXI029I
AN OMVS= PARMLIB MEMBER WAS NOT FOUND OR IS IN ERROR.
BPXI030I
THE OMVS= PARAMETER WAS FOUND TO HAVE A SYNTAX ERROR.
BPXI031E
BPXOINIT FAILED TO INITIALIZE. RETURN CODE return_code REASON CODE reason_code
BPXI032E
FORK SERVICE HAS BEEN SHUTDOWN SUCCESSFULLY. ISSUE F BPXOINIT,RESTART = FORKS TO RESTART FORK SERVICE.
BPXI033E
FORK SERVICE SHUTDOWN HAS FAILED. ISSUE F BPXOINIT,RESTART = FORKS TO RESTART FORK SERVICE; OR RE-IPL.
BPXI034I
BPXOINIT MUST BE STARTED BY OMVS INITIALIZATION, STARTED PROC procname IGNORED.
BPXI035E
INITIAL PROCESS USERID NOT UID = 0. CHANGE TO UID = 0 AND RE-IPL.
BPXI036E
UNIX SYSTEM SERVICES ARE NOT AVAILABLE.
BPXI037I
PARMLIB OPTIONS IGNORED WHILE PROCESSING PARMLIB MEMBER = memname settype
BPXI038I
TASK procname HAS ABNORMALLY ENDED. text
BPXI039I
SYSTEM LIMIT limname HAS REACHED limperc% OF ITS CURRENT CAPACITY OF limtot
BPXI040I
PROCESS LIMIT limname HAS REACHED limperc% OF ITS CURRENT CAPACITY OF limtot FOR PID=pid IN JOB name RUNNING IN ADDRESS SPACE asid
BPXI041I
RESOURCE SHORTAGE FOR limitname HAS BEEN RELIEVED
BPXI042I
RESOURCE SHORTAGE FOR limname HAS BEEN RELIEVED
BPXI043E
MOUNT TABLE LIMIT HAS REACHED limperc% OF ITS CURRENT CAPACITY OF limtot
BPXI044I
RESOURCE SHORTAGE FOR MOUNT TABLE HAS BEEN RELIEVED.
BPXI045I
THE PRIMARY CDS SUPPORTS A LIMIT OF limtot MOUNTS AND A LIMIT OF bufftot AUTOMOUNT RULES.
BPXI046I
AN ERROR OCCURRED INITIALIZING THE COUPLE DATA SET AFTER PSWITCH.
BPXI047I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number. AT LEAST ONE SYSNAME MUST BE SPECIFIED ON THE AUTOMOVE SYSTEM LIST.
BPXI050I
THE PRIMARY CDS SUPPORTS A LIMIT OF mountval MOUNTS AND A LIMIT OF amtrules AUTOMOUNT RULES. THE VALUE OF DISTBRLM IS distbrlm.THE CDS VERSION IS cdsver.
BPXI055I
procname SHUTDOWN REQUEST ACCEPTED
BPXI056E
procname SHUTDOWN REQUEST HAS COMPLETED SUCCESSFULLY
BPXI057I
procname SHUTDOWN REQUEST REJECTED
BPXI058I
procname RESTART REQUEST ACCEPTED
BPXI059I
procname RESTART REQUEST REJECTED
BPXI060I
jobname RUNNING IN ADDRESS SPACE asid IS BLOCKING SHUTDOWN OF OMVS
BPXI061E
procname SHUTDOWN REQUEST ABORTED
BPXI062I
jobname RUNNING IN ADDRESS SPACE asid IS PREVENTING THE SHUTDOWN OF OMVS FROM COMPLETING
BPXI063I
procname MODIFY COMMAND REJECTED DUE TO SYNTAX ERROR
BPXI064E
procname SHUTDOWN REQUEST DELAYED
BPXI065E
procname SHUTDOWN HAS ENCOUNTERED A NON-RETRYABLE FAILURE
BPXI066E
procname SHUTDOWN COULD NOT MOVE OR UNMOUNT ALL FILE SYSTEMS
BPXI067E
OMVS= PARAMETER IS SPECIFIED IN ERROR. RESPECIFY OMVS= PARAMETER
BPXI068I
jobname RUNNING IN ADDRESS SPACE asid IS USING text
BPXI069I
A SYSPLEX(YES) STATEMENT WAS FOUND IN BPXPRMXX, CAUSING A CONFLICT WITH THE VALUE SPECIFIED OR DEFAULTED ON THE COUPLE STATEMENT IN COUPLEXX. THE SYSTEM WILL BE INITIALIZED WITH SYSPLEX(NO).
BPXI070E
USE SETOMVS ON ANOTHER SYSTEM TO MOVE NEEDED FILE SYSTEMS, THEN REPLY WITH ANY KEY TO CONTINUE SHUTDOWN.
BPXI071I
ERROR IN PARMLIB MEMBER=member ON LINE line-number, POSITION position-number. MKDIR VALUE CAN NOT BEGIN WITH /. input-line
BPXI072I
ERROR IN PARMLIB MEMBER=member ON LINE line-number, POSITION position-number. LENGTH OF MKDIR(mkdir-length) PLUS LENGTH OF MOUNTPOINT(mountpt-length) MUST BE LESS THAN pathmax.
BPXI073I
DATA SET dataset IS NOT CATALOGED.
BPXI074I
LOAD LIBRARY loadlib IS NOT ON THE SPECIFIED VOLUME voln
BPXI075E
TASK procname HAS ABNORMALLY ENDED. text
BPXI075I
ERROR IN PARMLIB MEMBER=memname ON LINE line-number
BPXI076E
LATCH CONTENTION EXISTS THAT MUST BE RESOLVED PRIOR TO SHUTDOWN
BPXI077I
THE PFS NAME IS INVALID OR THE PFS DOES NOT SUPPORT STOPPFS OR IS ALREADY STOPPED
BPXI078D
STOP OF NLSname_type REQUESTED, REPLY 'Y' TO PROCEED. ANY OTHER REPLY WILL CANCEL THIS STOP.
BPXI078I
THE PRIMARY CDS SUPPORTS A LIMIT OF mountval MOUNTS AND A LIMIT OF amtrules AUTOMOUNT RULES. THE CDS VERSION IS cdsver.
BPXI080I
INITTAB ENTRY inittab_entry STARTED WITH ACTION action
BPXI081I
INITTAB ENTRY inittab_entry NOT STARTED. reason
BPXI082E
INITTAB ERROR - ONE OR MORE ENTRIES COULD NOT BE STARTED
BPXI083D
RESPAWNABLE PROCESS job_name ENDED. REPLY R TO RESTART THE PROCESS. ANYTHING ELSE TO END THE PROCESS.
BPXI084E
OMVS SHUTDOWN IS STALLED IN FILE SYSTEM TERMINATION
BPXI085D
REPLACEMENT OF CURRENT SYSPLEX ROOT IS REQUESTED. REPLY 'Y' TO PROCEED, OR ANY OTHER TO CANCEL.
BPXI086I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number. INPUT PARAMETER VALUE IS OUT OF THE ALLOWED RANGE OF minimum-number TO maximum-number. A SYSTEM VALUE OF parm-value IS USED. DETECTING MODULE IS detmod. INPUT LINE: input-line
BPXI087I
THE CURRENT BPXDIAG VALUE IS diagval
BPXI088I
ERROR IN PARMLIB MEMBER memname ON LINE line-number POSITION position-number, text THE SYSTEM DEFAULT VALUE of default-value is USED. DETECTING MODULE is detmod. INPUT LINE: inline
BPXI089I
MODIFY OMVS,PFS COMMAND FAILED RETURN CODE = rc, REASON CODE = rsn
BPXM001I
BPXBATCH FAILED DUE TO AN INCORRECT ddname ALLOCATION WITH A PATH OPTION WRITE OR READ/WRITE SPECIFIED.
BPXM002I
BPXBATCH FAILED DUE TO AN ERROR IN ALLOCATION OF ddname. ALLOCATION PATH OPTIONS MUST BE WRITE ONLY.
BPXM004I
BPXBATCH FAILED BECAUSE THE CALLER OR CALLING PROGRAM DID NOT HAVE A PSW SECURITY KEY OF 8.
BPXM006I
BPXBATCH FAILED BECAUSE EXEC (BPX1EXC) OF /BIN/LOGIN FAILED WITH RETURN CODE return_code REASON CODE reason_code
BPXM007I
BPXBATCH FAILED DUE TO AN ERROR FROM OPENMVS CALLABLE SERVICE system_call WITH RETURN CODE return_code REASON CODE reason_code
BPXM008I
BPXBATCH FAILED BECAUSE EXEC (BPX1EXC) OF THE PROGRAM NAME FAILED WITH RETURN CODE return_code REASON CODE reason_code.
BPXM009I
BPXBATCH FAILED BECAUSE OPEN (BPX1OPN) FOR ddname FAILED WITH RETURN CODE return_code REASON CODE reason_code
BPXM010I
BPXBATCH FAILED BECAUSE THE PARAMETERS DID NOT START WITH SH OR PGM.
BPXM011I
BPXBATCH FAILED BECAUSE THE PARAMETERS SPECIFIED PGM WITHOUT A PROGRAM NAME AFTER PGM.
BPXM012I
BPXBATCH FAILED BECAUSE OPEN FOR ddname FAILED WITH RETURN CODE return_code
BPXM013I
BPXBATCH FAILED DUE TO AN INCORRECT text FOR ddname.
BPXM014I
BPXBATCH FAILED BECAUSE READ (BPX1RED) FOR ddname FAILED WITH RETURN CODE return_code REASON CODE reason_code
BPXM015I
BPXBATCH FAILED BECAUSE RETURN CODE return_code WAS RECEIVED DURING AN ATTEMPT TO OBTAIN STORAGE FOR A BUFFER.
BPXM016I
BPXBATCH FAILED BECAUSE AN MVS PDS WITH NO MEMBER NAME WAS SPECIFIED FOR STDENV.
BPXM017I
BPXBATCH FAILED BECAUSE THE PATH SPECIFIED FOR ddname IS A DIRECTORY.
BPXM018I
BPXBATCH FAILED BECAUSE SPAWN (BPX1SPN) OF /BIN/LOGIN FAILED WITH RETURN CODE return_code REASON CODE reason_code
BPXM019I
BPXBATCH FAILED BECAUSE SPAWN (BPX1SPN) OF THE PROGRAM NAME FAILED WITH RETURN CODE return_code REASON CODE reason_code
BPXM020I
BPXBATCH FAILED BECAUSE MVSPROCCLP (BPX1MPC) FAILED WITH RETURN CODE return_code REASON CODE reason_code
BPXM021E
THE TARGET OF keyword= IS NOT RECOGNIZED. THE EXPECTED FORMAT FOR THIS OPERAND IS: keyword=PID.TID OR keyword=PID WHERE PID IS 1-10 DIGIT DECIMAL PROCESS IDENTIFIER AND TID IS 1-16 HEXADECIMAL THREAD IDENTIFIER
BPXM022E
MODIFY SYNTAX ERROR; badparm WAS FOUND WHERE ONE OF THE FOLLOWING WAS EXPECTED: parms
BPXM023I
loginname
BPXM024I
CONFLICTING PARAMETERS ON MODIFY COMMAND
BPXM025I
PID MUST BE IN THE RANGE 2 - 4294967294.
BPXM026I
THE TARGET OF keyword, identifier, WAS NOT FOUND.
BPXM027I
COMMAND ACCEPTED.
BPXM028I
STOP REQUEST WAS IGNORED BY name.
BPXM029I
APPL= KEYWORD WAS IGNORED BY name.
BPXM030I
ERROR PROCESSING THE USERIDALIASTABLE - aliasfile functionstatus return_code REASON CODE reason_code text
BPXM031I
ERROR PROCESSING THE USERIDALIASTABLE - aliasfile errorfound line-number text
BPXM032E
ERROR PROCESSING THE USERIDALIASTABLE - text
BPXM033I
USERIDALIASTABLE NAME CHANGE FOR - aliasfile CANNOT BE PROCESSED AT THIS TIME. TRY AGAIN LATER.
BPXM036I
BPXAS INITIATORS SHUTDOWN.
BPXM037I
BPXAS INITIATORS SHUTDOWN DELAYED.
BPXM038I
MODIFY BPXOINIT SHUTDOWN COMMAND REJECTED.
BPXM039I
MODIFY BPXOINIT RESTART COMMAND REJECTED.
BPXM040I
FORK SERVICE ALREADY SHUTDOWN.
BPXM041I
FORK SERVICE ALREADY STARTED.
BPXM042I
FORK SERVICE RESTARTED.
BPXM043I
ERROR WITH BPXAS INITIATOR SHUTDOWN REQUEST.
BPXM044I
BPXOINIT FILESYSTEM SHUTDOWN COMPLETE
BPXM045I
BPXOINIT FILESYSTEM SHUTDOWN INCOMPLETE. notshutdown FILESYSTEM(S) FAILED TO UNMOUNT.
BPXM046I
BPXBATCH FAILED BECAUSE EXEC (BPX1EXC) OF program_name FAILED WITH RETURN CODE return_code REASON CODE reason_code.
BPXM047I
BPXBATCH FAILED BECAUSE SPAWN (BPX1SPN) OF program_name FAILED WITH RETURN CODE return_code REASON CODE reason_code.
BPXM048I
BPXOINIT FILESYSTEM SHUTDOWN INCOMPLETE. notshutdown FILESYSTEM(S) ARE STILL OWNED BY THIS SYSTEM. mounted FILESYSTEM(S) WERE MOUNTED DURING THE SHUTDOWN PROCESS.
BPXM049I
MODIFY PROCESSING FOR BPXOINIT FILESYSTEM SHUTDOWN FAILED. RETURN CODE=retcode, REASON CODE=reason.
BPXM050E
ERROR PROCESSING THE AUTHPGMLIST - text
BPXM051I
ERROR PROCESSING THE AUTHPGMLIST – aliasfile functionstatus return_code REASON CODE reason_code text
BPXM052I
ERROR PROCESSING THE AUTHPGMLIST – aliasfile errorfound line-number actiontaken
BPXM053I
AUTHPGMLIST NAME CHANGE FOR – aliasfile CANNOT BE PROCESSED AT THIS TIME. TRY AGAIN LATER.
BPXM054I
FILE SYSTEM name FAILED TO operation. RET CODE = retcode, RSN CODE = reason
BPXM055D
THIS SYSTEM WILL BE DISABLED AS A FILESYSTEM OWNER. REPLY 'Y' TO CONTINUE OR ANY OTHER KEY TO EXIT.
BPXM056E
UNIX SYSTEM SERVICES LATCH CONTENTION DETECTED
BPXM057E
UNIX SYSTEM SERVICES LATCH CONTENTION NOT RESOLVING
BPXM058I
MODIFY BPXOINIT RECOVER COMMAND REJECTED
BPXM059I
ACTIVATE=SERVICE REQUEST FAILED, reason
BPXM060I
NO DYNAMIC SERVICE ITEMS FOUND TO ACTIVATE
BPXM061D
REPLY "Y" TO PROCEED WITH ACTIVATION. ANY OTHER REPLY ENDS THE COMMAND.
BPXM061I
THE FOLLOWING SERVICE ITEMS WILL BE ACTIVATED serviceitem1 serviceitem2 ... ECSA STORAGE BYTES: ecsabytes AND OMVS PRIVATE STORAGE BYTES: prvbytes WILL BE CONSUMED FOR THIS ACTIVATION.
BPXM062I
ACTIVATE=SERVICE REQUEST COMPLETED SUCCESSFULLY
BPXM063D
REPLY "Y" TO PROCEED WITH DEACTIVATION. ANY OTHER REPLY ENDS THE COMMAND.
BPXM063I
THE FOLLOWING SERVICE ITEMS WILL BE DEACTIVATED: serviceitem1 serviceitem2 ...
BPXM064I
serviceitem CANNOT BE action DUE TO reason
BPXM065I
DEACTIVATE=SERVICE REQUEST COMPLETED SUCCESSFULLY
BPXM066I
NO DYNAMIC SERVICE ITEMS FOUND TO DEACTIVATE
BPXM067I
UNIX SYSTEM SERVICES LATCH CONTENTION RESOLVED
BPXM068I
BPXBATCH UNABLE TO ALLOCATE STORAGE FOR THE buffertype FAILED WITH RETURN CODE return_code
BPXM070I
BPXBATCH STDPARM PROCESSING ENCOUNTERED ERRORS
BPXM077I
BPXBATCH FAILED BECAUSE A MVS PDS OR PDSE WITH NO MEMBER WAS SPECIFIED ON ddname
BPXM078I
BPXBATCH FAILED BECAUSE THE STDPARM DATA SET CONTAINED GREATER THAN THE MAXIMUM SUPPORTED PARAMETER DATA
BPXM079I
BPXBATCH PROCESSING IS USING THE STDPARM DD RATHER THAN parm
BPXM080I
THE RECORD SIZE OF THE ddname DATA SET IS SMALLER THAN A LINE OF OUTPUT, TRUNCATION HAS OCCURRED
BPXM081I
ddname_1 IS TO BE REDIRECTED TO ddname_2
BPXM082I
THE AUTHORIZED BPXBATCH INTERFACE DOES NOT SUPPORT THE SH KEYWORD. REQUEST IS REJECTED
BPXM083I
THE AUTHORIZED BPXBATCH INTERFACE WAS INVOKED FROM AN UNSUPPORTED ENVIRONMENT. REQUEST IS REJECTED
BPXM084I
UNABLE TO OBTAIN STORAGE FOR LATCH IDENTITY STRINGS.RETURN CODE IS rc, REASON CODE IS rsn.
BPXM100I
THE VALUE FOR FILESYS= IS NOT RECOGNIZED. badfunct WAS FOUND WHERE ONE OF THE FOLLOWING WAS EXPECTED: parm parm parm parm parm parm parm parm
BPXM101I
MODIFY SYNTAX ERROR; badparm WAS FOUND, BUT IS NOT VALID FOR A FILESYS OPERATION.
BPXM102I
MODIFY SYNTAX ERROR; requiredparm WAS EXPECTED BUT NOT FOUND.
BPXM103I
A FAILURE OCCURRED WHILE PROCESSING A MODIFY COMMAND FOR A FILESYS OPERATION. RETURN CODE=retcode, REASON CODE=reason.
BPXM104I
MODIFY SYNTAX ERROR; badparm DOES NOT HAVE A VALID VALUE.
BPXM105I
FILESYS= DOES NOT HAVE A VALID VALUE. SPECIFY ONE OF THE FOLLOWING VALUES: parm parm parm parm parm parm parm parm
BPXM106I
UNIX SYSTEM SERVICES WAS NOT STARTED IN SYSPLEX MODE. THE MODIFY FUNCTION CANNOT BE PERFORMED.
BPXM107I
THE MODIFY COMMAND IS REJECTED. A PREVIOUS MODIFY COMMAND FOR A FILESYS OPERATION IS IN PROGRESS.
BPXM120D
F BPXOINIT,FILESYS=funcname SHOULD BE USED WITH CAUTION. REPLY 'Y' TO CONTINUE. ANY OTHER REPLY TERMINATES.
BPXM121I
MODIFY COMMAND TERMINATED AT OPERATOR REQUEST.
BPXM122I
MMAP ERROR FOR FILE SYSTEM fsname PATH pathname INODE inodeno RETURN CODE = retcode REASON = reason
BPXM123E
z/OS UNIX HAS DETECTED THAT A GRS LATCH HAS BEEN HELD BY JOB jjjjjjjj FOR AN EXTENDED PERIOD OF TIME
BPXM124E
BPXDIAG VALUE OF diagval IS NOW IN EFFECT
BPXM125I
BPXDIAG IS NO LONGER IN EFFECT
BPXM126I
SC_EXITTABLE NAME CHANGE FOR –exitsfile CANNOT BE PROCESSED AT THIS TIME. TRY AGAIN LATER.
BPXM127I
COULD NOT FIND mod_name IN THE MODULE TABLE.
BPXM128I
SYSEXIT FILE IS NOT DEFINED.
BPXM129I
SYSEXIT FILE NOT FOUND.
BPXM130I
ERROR OPENING SYSEXITS FILE.
BPXM131I
ONE OF THE MODULE NAMES IS TOO LONG.
BPXM132E
ERROR APPLYING EXITS.
BPXM134I
THE MODULE mod_name IS INTERNAL AND CANNOT HAVE AN EXIT INSTALLED.
BPXN001I
UNIX SYSTEM SERVICES PARTITION CLEANUP IN PROGRESS FOR SYSTEM sysname
BPXN002I
UNIX SYSTEM SERVICES PARTITION CLEANUP COMPLETE FOR SYSTEM sysname
BPXN003E
UNIX SYSTEM SERVICES WORKER TASK MANAGER FOR THE SYSPLEX ENDED DUE TO AN INTERNAL ERROR. RESTART Z/OS UNIX AS SOON AS PRACTICABLE.
BPXN004I
LOST MESSAGE DETECTED FROM sysname - SEQNO seqno EXPECTED seqno
BPXN005I
DUPLICATE MESSAGE DETECTED FROM sysname - SEQNO seqno EXPECTED seqno
BPXN006E
UNIX SYSTEM SERVICES WORKER TASK MANAGER FOR THE SYSPLEX DETECTED A SEVERE INTERNAL ERROR. RE-IPL THE SYSTEM AS SOON AS PRACTICABLE
BPXO001I
hh.mm.ss DISPLAY OMVS
BPXO002I
hh.mm.ss DISPLAY OMVS
BPXO003I
hh.mm.ss DISPLAY OMVS
BPXO006I
ERROR IN SETOMVS COMMAND. THE bad-parameter PARAMETER VALUE IS OUT OF THE ALLOWED RANGE OF minimum-number TO maximum-number.
BPXO007I
ERROR IN SETOMVS COMMAND. bad-parameter PARAMETER VALUE IS NOT NUMERIC.
BPXO008I
ERROR IN SETOMVS COMMAND. THE NUMBER OF VALUES SPECIFIED FOR THE PARAMETER badparm EXCEEDS THE MAXIMUM NUMBER ALLOWED.
BPXO009I
ERROR IN SETOMVS COMMAND. THE LENGTH OF THE PARAMETER badparm IS NOT IN THE ALLOWED RANGE OF minimum-number TO maximum-number.
BPXO012I
ERRORS OCCURRED IN THE PROCESSING OF THE SETOMVS COMMAND; NO VALUES WERE SET.
BPXO015I
THE SETOMVS COMMAND WAS SUCCESSFUL.
BPXO016I
(form 1) SETOMVS SYNTAX ERROR; badparm WAS FOUND WHERE ONE OF THE FOLLOWING WAS EXPECTED: parms
BPXO016I
(form 2) SETOMVS SYNTAX ERROR; badparm WAS NOT EXPECTED
BPXO017I
SETOMVS ERROR. LOWERING limitname IS CURRENTLY NOT ALLOWED. A WARNING MESSAGE FOR THIS LIMIT IS OUTSTANDING.
BPXO023I
THE PARMLIB MEMBER memname CONTAINS SYNTAX ERRORS. REFER TO HARD COPY LOG FOR MESSAGES.
BPXO024I
ERROR IN SETOMVS COMMAND. THE badparm PARAMETER VALUE MUST BEGIN WITH AN ALPHABETIC CHARACTER.
BPXO025I
ERROR IN SETOMVS COMMAND. expected WAS EXPECTED BEFORE token.
BPXO026I
SETOMVS COMMAND FAILED. ISSUER DOES NOT HAVE MASTER CONSOLE AUTHORITY.
BPXO027I
SETOMVS COMMAND PROCESSOR IS CURRENTLY NOT AVAILABLE. REASON CODE: reason_code
BPXO028I
SET OMVS COMMAND PROCESSOR IS CURRENTLY NOT AVAILABLE. REASON CODE: reason_code
BPXO029I
LIMMSG CHANGED FROM oldvalue TO newvalue
BPXO030I
SYNTAX ERRORS ENCOUNTERED WHILE PROCESSING PARMLIB MEMBERS ON SET OMVS COMMAND. REASON: reason_code
BPXO031I
ERRORS IN PARMLIB MEMBER=memname REFER TO THE HARD COPY LOG. SET OMVS COMMAND FAILED.
BPXO032I
THE SET OMVS COMMAND WAS SUCCESSFUL.
BPXO033I
IEFPARM DD COULD NOT BE ALLOCATED. NO MEMBERS CAN BE PROCESSED. RETURN CODE = returncode REASON CODE = reason_code
BPXO034I
SYNTAX ERRORS ENCOUNTERED WHILE PROCESSING PARMLIB MEMBER NAME ON SETOMVS COMMAND. FORMAT IS SETOMVS RESET = (XX)
BPXO035I
ERRORS IN PARMLIB MEMBER = memname. REFER TO THE HARD COPY LOG. SETOMVS RESET COMMAND FAILED.
BPXO036I
PARMLIB OPTIONS IGNORED WHILE PROCESSING PARMLIB MEMBER = memname settype.
BPXO037E
UNABLE TO PERFORM FILESYS REQUEST FOR movetype movebuffer. THIS OPERATION FAILED WITH RETURN CODE return_code REASON CODE reason_code.
BPXO038I
SUCCESSFULLY MOVED moveoks FILESYSTEMS TO SYSTEM movesys.
BPXO039I
SETOMVS SYNTAXCHECK COMMAND SUCCESSFUL.
BPXO040I
hh.mm.ss DISPLAY OMVS
BPXO041I
hh.mm.ss DISPLAY OMVS
BPXO042I
hh.mm.ss DISPLAY OMVS
BPXO043I
hh.mm.ss DISPLAY OMVS text
BPXO044I
hh.mm.ss DISPLAY OMVS text
BPXO045I
hh.mm.ss DISPLAY OMVS
BPXO046I
hh.mm.ss DISPLAY OMVS text
BPXO047I
hh.mm.ss DISPLAY OMVS text
BPXO048I
ERROR IN SETOMVS COMMAND. bad-parameter VERSION VALUE MAY BE A SINGLE SLASH OR A STRING THAT DOES NOT CONTAIN ANY BLANKS OR SLASHES.
BPXO049I
ERROR IN PARMLIB MEMBER memname ON LINE line-number, POSITION position-number, INPUT PARAMETER MAY ONLY BE A SINGLE / OR A STRING THAT MUST NOT CONTAIN ANY SLASHES OR BLANKS. THE SYSTEM DEFAULT VALUE OF default-value IS USED. DETECTING MODULE IS detmod. INPUT LINE: input-line
BPXO050I
MAXRTYS IS OBSOLETE. THE VALUE CANNOT BE CHANGED.
BPXO051I
hh.mm.ss DISPLAY OMVS text
BPXO052I
THE SYSNAME PARM VALUE MUST CONTAIN ONLY ALPHABETIC, NUMERIC, OR NATIONAL CHARACTERS
BPXO053I
THE MOUNT PARAMETERS: AUTOMOVE, NOAUTOMOVE, AND UNMOUNT ARE MUTUALLY EXCLUSIVE. SPECIFY ONLY ONE PER MOUNT.
BPXO054I
SETOMVS SYNTAX ERROR; PID= was expected
BPXO055I
ERROR IN SETOMVS COMMAND. AT LEAST ONE SYSNAME MUST BE SPECIFIED ON THE AUTOMOVE SYSTEM LIST
BPXO056I
ERROR IN SETOMVS COMMAND. THE parmname PARAMETER VALUE IS OUT OF THE ALLOWED RANGE OF minlimit TO maxlimit
BPXO057I
hh.mm.ss DISPLAY procname kernalasid status parmmemberlistOMVS UNIX SERIALIZATION REPORTtext
BPXO058I
hh.mm.ss DISPLAY OMVS text
BPXO059I
hh.mm.ss DISPLAY OMVS text
BPXO060I
hh.mm.ss DISPLAY OMVS text
BPXO061I
MAXUSERMOUNTSYS WAS CHANGED FROM oldvalue TO newvalue
BPXO062I
NONEMPTYMOUNTPT WAS CHANGED FROM oldvalue TO newvalue
BPXO063I
hh.mm.ss DISPLAY OMVS text
BPXO068I
hh.mm.ss DISPLAY OMVS text
BPXO070I
hh.mm.ss DISPLAY OMVS
BPXO071I
MAXUSERMOUNTUSER was changed from oldvalue TO newvalue
BPXO072I
hh.mm.ss DISPLAY OMVS text
BPXO073I
hh.mm.ss DISPLAY OMVS text
BPXO074I
hh.mm.ss DISPLAY OMVS text
BPXO075I
hh.mm.ss DISPLAY OMVS text
BPXO088I
ERROR IN SETOMVS COMMAND
BPXP001I
OPENMVS INIT PROCESS CANNOT BE CREATED. FAILURE REASON CODE = reason_code. APPC/MVS RETURN CODE = return_code.
BPXP002I
BPXP003E
OPENMVS INIT PROCESS CANNOT BE STARTED. AN ERROR OCCURRED DURING APPC PROCESSING. APPC RETURN CODE = returncode. VERIFY APPC AND APPC SCHEDULER ARE OPERATIVE, OR ENTER FORCE jobname,ARM TO END PROCESSING.
BPXP004E
FORK PROCESSING FAILED. AN ERROR OCCURRED DURING APPC PROCESSING. APPC RETURN CODE = returncode. VERIFY THAT APPC AND APPC SCHEDULER ARE OPERATIVE.
BPXP005I
A FORK OR SPAWN ERROR WAS ENCOUNTERED. RETURN CODE return_code REASON CODE reason_code
BPXP006E
procname IS text
BPXP007E
STARTING PHYSICAL FILE SYSTEM pfsname IN ADDRESS SPACE spacename
BPXP008E
MOUNTING THE FILE SYSTEM name
BPXP009I
THREAD threadid, IN PROCESS pid, ENDED ABNORMALLY WITH COMPLETION CODE compcode, REASON CODE reasoncode.
BPXP010I
THREAD threadid1, IN PROCESS pid1, WAS TERMINATED BY SIGNAL signal, SENT FROM THREAD threadid2, IN PROCESS pid2, UID uid.
BPXP011I
THREAD threadid, IN PROCESS pid, WAS TERMINATED DUE TO A PTHREAD QUIESCE OF TYPE type.
BPXP012I
{FORK|SPAWN} SYSCALL TERMINATED DURING CHILD PROCESSING WITH RETURN CODE returncode, REASON CODE reasoncode. THE CHILD PROCESS IS pid1 IN ASID asid1. THE PARENT PROCESS IS pid2, UID uid, IN ASID asid2.
BPXP013I
THREAD threadid, IN PROCESS pid, WAS TERMINATED BY SIGNAL signal, DUE TO CPU TIME OUT.
BPXP014I
ENVIRONMENT MUST envirstate CONTROLLED FOR text PROCESSING.
BPXP015I
HFS PROGRAM pathname IS text.
BPXP016I
ENVIRONMENT IS UNCONTROLLED BECAUSE IT IS BEING DEBUGGED (DBX) BY AN UNTRUSTED DEBUGGER
BPXP017I
DEBUGGER IS UNTRUSTED AND IS NOT ALLOWED TO DEBUG A PROGRAM CONTROLLED ENVIRONMENT.
BPXP018I
THREAD threadid, IN PROGRESS pid, ENDED WITHOUT BEING UNDUBBED WITH COMPLETION CODE comcode, AND REASON CODE reasoncode.
BPXP019I
HFS PROGRAM pathname IS text
BPXP020I
APF PROGRAM pathname IS NOT IN THE APF PROGRAM NAME LIST.
BPXP021I
WARNING: ENVIRONMENT NEEDS TO state CONTROLLED FOR environment PROCESSING.
BPXP022E
ONE OR MORE JOBS ARE WAITING FOR z/OS UNIX SYSTEM SERVICES AVAILABILITY.
BPXP022I
PROCESS pid CHANGED FROM SYSMULTI TO A NON-SYSMULTI SECLABEL WITH AN OPEN FILE OR SOCKET DESCRIPTOR.
BPXP023I
THREAD threadid1, IN PROCESS pid1, WAS TERMINATED BY SIGNAL signal, SENT FROM THREAD threadid2, IN PROCESS pid2, UID uid, IN JOB jobname.
BPXP024I
BPXAS INITIATOR STARTED ON BEHALF OF JOB job_name RUNNING IN ASID asid
BPXP025I
A FORK OR SPAWN ERROR WAS ENCOUNTERED. A RACROUTE REQUEST=VERIFY FAILURE OCCURRED FOR USERID userid. SAF RETURN CODE safrc, RACF RETURN CODE return_code, RACF REASON CODE reason_code.
BPXP026E
RESPAWNABLE PROCESS jjjjjjjj COULD NOT BE RESTARTED. failure textRETURN CODE = rrrrrrrr, REASON CODE = ssssssss.
BPXP027I
JOBNAME job_name ATTEMPTED TO ISSUE AN EXEC OF THE APF-AUTHORIZED MVS PROGRAM pgmname WITH A PARAMETER LENGTH OF xxx.
BPXP028I
SPAWN or EXEC ERROR FOR FILE PATH pathname DEVICE ID devid INODE inodeno. THE ASSOCIATED MVS MEMBER NAME IS membername.
BPXP029I
OPEN ERROR FOR FILE PATH pathname DEVICE ID devid INODE inodeno.
BPXT001I
THE MAXSOCKETS VALUE OF max-sockets-val ON THE NETWORK STATEMENT IN PARMLIB MEMBER member-name EXCEEDS THE MAXIMUM NUMBER OF SOCKETS SUPPORTED BY THE text
BPXT002I
THE MAXSOCKETS VALUE FOR AF_UNIX HAS BEEN SET TO 10000.
BPXTF001I
TFS TERMINATION REQUEST ACCEPTED
BPXTF002I
TFS TERMINATION REQUEST FAILED DUE TO ACTIVE MOUNTS
BPXTF003I
TFS UNCONDITIONAL TERMINATION REQUEST ACCEPTED
BPXTF004I
UNSUPPORTED MODIFY COMMAND
BPXTF006I
TFS MOUNTED file_system
BPXTF007I
FILESYSTEM SIZE=file_system_size MAX FILE SIZE=max_file_size
BPXTF008I
INVALID MOUNT PARAMETERS IGNORED AT COLUMN n
BPXTF009E
FILESYSTEM EXCEEDS percent% full: name
BPXTF010E
FILESYSTEM IS FULL: name
BPXTF011I
FILESYSTEM IS NOW BELOW percent% FULL: name
BPXTF012I
GLOBAL SETTINGS: fsfull(threshold,increment) ea growa em growm
BPXTF014I
FILESYSTEM EXTENDED ea count em count2
BPXTF015I
MANUAL EXTENDS EXCEEDED FOR count2
BPXTF016I
BPXTF016I fsname
BPXTF017I
INVALID FILESYSTYPE PARAMETER IGNORED AT COLUMN column
BPXTF018I
FILESYSTEM NOT FOUND
BPXTF019I
TOTAL EXTENDS WOULD EXCEED MAXIMUM ALLOWED
BPXTF107I
FILESYSTEM SIZE=size MAX FILE SIZE=size2 FSFULL (threshold,increment) EA=growa EM=growm
BPXTF990I
text
BPXU001I
VTAM CHANNEL COMMUNICATIONS FAILED. RETURN CODE = return_code VTAM RESOURCE NAME = resourcename, FUNCTION = function
BPXU002I
VTAM CHANNEL COMMUNICATIONS FAILED. RETRY LIMIT EXCEEDED. VTAM RESOURCE NAME = resourcename, FUNCTION = function
BPXU003I
AN IP LAYER CONFIGURATION ERROR WAS DETECTED. VTAM RESOURCE NAME = resource_name, REASON CODE = reason_code
BPXU004I
VTAM CHANNEL INITIALIZATION SUCCESSFUL. VTAM RESOURCE NAME = resourcename
BPXU006I
FILE SYSTEM MIGRATION WAS STARTED. source fsname target fsname
BPXU007I
FILE SYSTEM MIRROR COMPLETE AND WAITING FOR SWAP. source fsname target fsname
BPXU008I
FILE SYSTEM MIGRATION IS COMPLETE. old fsname new fsname
BPXU009I
FILE SYSTEM SWAP IS DELAYED WITH reason code reason_code. source fsname target fsname
BPXU0010I
FILE SYSTEM FAILED WITH reason code reason_code. THE OPERATION IS CANCELED. source fsname target fsname
BPXU011E
FILE SYSTEM MIGRATION IS NOT AVAILABLE.
BPXW0000I
Exec not found
BPXW0001I
STORAGE ALLOCATION ERROR
BPXW0002I
Unable to read exec
BPXW0003I
Improper text file
BPXW0004I
Parameter string too long
BPXW0005I
First argument must be a REXX program name
BPXW0006I
Parameter arg 0 must match the name of the program you intended to run
BPXW9000I
Wrong number of arguments
BPXW9001I
Error allocating result block
BPXW9002I
DD names not currently supported
BPXW9003I
Too many arguments
BPXW9004I
Invalid stream name
BPXW9005I
Invalid start parameter
BPXW9006I
lseek error
BPXW9007I
Invalid I/O length
BPXW9008I
read error
BPXW9009I
write error
BPXW9010I
Invalid line number parameter
BPXW9011I
Invalid line count parameter
BPXW9012I
I/O error
BPXW9013I
Invalid command argument
BPXW9014I
Invalid stream command
BPXW9015I
Unknown stream action argument
BPXW9016I
Internal error
BPXW9017I
Unable to create stream for read
BPXW9018I
open error: d(X) X
BPXW9019I
Missing file name
BPXW9020I
ioctl error: d(X) X
BPXW9021I
Invalid position argument
BPXW9022I
lseek error ignored
BPXW9023I
Pipe create failed
BPXW9024I
Wrong use for open type
BPXW9025I
Invalid OPEN argument
BPXW9026I
Missing argument
BPXW9027I
Missing octal digits
BPXW9028I
Invalid argument
BPXW9030I
Insufficient storage
BPXW9031I
Argument must be in the form mmddyyyyhhmmss
BPXW9032I
Year must not be less than 1970.
BPXW9040I
Invalid option
BPXW9041I
Missing arguments
BPXW9043I
Invalid argument length
BPXW9044I
spawn for BPXWRTSO failed
BPXW9045I
Invalid continue from BPXWRTSO
BPXW9046I
Unable to send command to TSO process
BPXW9047I
select error
BPXW9048I
Stream command argument is missing
BPXW9049I
Missing stream name
BPXW9050I
Token not supported on OPEN
BPXW9051I
Stream not open for read
BPXW9054I
Unable to create stream for write
BPXW9055I
Stream not open for write
BPXW9090I
Select an immediate command by number: 1 Continue 2 Halt interpretation 3 Start trace 4 End trace 5 Halt type 6 Resume type
BPXW9091I
Interrupt ignored for setuid/setgid
BPXW9092I
Command+parms length > 32763 not supported
BPXWM000
INCORRECT PATHNAME
BPXWM001
UNABLE TO CONNECT TO OMVS. ERRNO=varsub var=enovarsub var=rsn. THE ONLY SERVICE AVAILABLE IS "MAKE A FILE SYSTEM". PRESS ENTER TO CONTINUE.
BPXWM002
INCORRECT COMMAND
BPXWM003
ERRNO=varsub var=eno varsub var=rsn. PRESS ENTER TO CONTINUE.
BPXWM004
PRINTED TO THE ISPF LIST DATA SET.
BPXWM005
(NO ERROR TEXT) REASON=errno
BPXWM006
UNABLE TO SET UP USER varsub var=user. PLEASE MAKE SURE THE GROUP HAS BEEN SET UP AND THE USER HAS BEEN DEFINED.
BPXWM007
varsub var=user DEFINED AS U(varsub var=pwuid) G(varsub var=pwgid) H(varsub var=pwdir) P(varsub var=pwpgm)
BPXWM008
UNABLE TO DETERMINE NEXT UID
BPXWM009
UNAVAILABLE CHOICE
BPXWM010
SETTING UP GROUP varsub var=grname WITH GID=varsub var=gid
BPXWM011
varsub var=cmd
BPXWM012
DATA SET NOT FOUND
BPXWM013
FILE SYSTEM ALREADY EXISTS
BPXWM014
ALLOCATION FOR FILE SYSTEM FAILED
BPXWM015
UNABLE TO EXECUTE varsub var=pgmpath
BPXWM016
NOTHING FOUND
BPXWM017
UNABLE TO ACCESS varsub var=msgpath FOR READ
BPXWM018
FILES ARE IDENTICAL
BPXWM019
MISSING ARGUMENT
BPXWM020
TIME LIMIT EXCEEDED
BPXWM021
EXIT STATUS varsub var=code
BPXWM022
ENDED BY SIGNAL varsub var=code
BPXWM023
STOP SIGNAL varsub var=code
BPXWM024
SOME CHOICES (*) REQUIRE SUPERUSER OR THE 'SPECIAL' ATTRIBUTE FOR FULL FUNCTION, OR BOTH
BPXWM025
UNABLE TO ACCESS varsub var=msgpath FOR WRITE
BPXWM026
TRAILING BLANKS IN DIRECTORY NAMES OR FILENAMES ARE NOT SUPPORTED BY EDIT OR BROWSE
BPXWM027
ENTER S TO STOP, ANYTHING ELSE TO CONTINUE
BPXWM028
NO MEMBERS WERE SELECTED
BPXWM029
DIFFERENCES WERE FOUND
BPXWM030
STRINGS WERE FOUND
BPXWM031
FILE IS NOT A TEXT FILE
BPXWM032
NO FILES WERE COPIED
BPXWM033
FILES NOT SELECTED
BPXWM034
DUPLICATE ENTRY IGNORED
BPXWM035
UNDEFINED UID OR GID
BPXWM036
FILE HAS NO ACL
BPXWM037
THIS SERVICE DOES NOT SUPPORT PATHNAMES CONTAINING {}
BPXWM999
(c) COPYRIGHT IBM CORP., 1993, 2002. ALL RIGHTS RESERVED.