SET: Setting VSE/POWER Startup Control Values

Values defined by way of a SET statement override the definitions made in the POWER® generation macro or provide additional start-up values.

AUTONAME
To enable automatic flushing or holding of any series of job statements that are read in as an AUTONAME job.1
CCWCKX
To perform an extended check of the CCW operation.1
CCW01
To suppress a 'Write No Space' for VM list tasks.1
CH9CH12
To re-establish FCB Channel 9/12 overflow posting for VSE/POWER local list tasks.1
CONFIRM
To request confirmation, by reply to message 1QZ3D, that a given command should be processed by VSE/POWER.1
DBLK
To define the size of the Data Block record of the data file.
DLSEP
To force identical separator pages and drop the 'last-one' separator page for all list tasks to be started.1
DLSEPSAS
To force identical separator pages and drop the 'last one' separator page for all Spool Access Support (SAS) orr Device Service (DST) tasks.1
DYNAL
To prefer static partition support versus allocation of dynamic partitions.1
DYNOUTc
To modify the default output class of dynamic partitions.1
DYNOUTCL
To modify the default output class of dynamic partitions.1
FCB
To have VSE/POWER use a default FCB at output spooling time, instead of the LTAB of the POWER macro.1
FROM
To reduce ICCF access rights for jobs specifying the FROM operand in the * $$ JOB statement.1
GETVQFL
To override startup default location for creating the queue file copy. 1
HOLDCL
To override the default disposition and class of $LSTnnnn or $TAPnnnn output entries.1
IGNREC
To change the disposition of a queue entry to DISP=Y when it has been flagged by message 1Q4LI (local processing) or 1Q4KI (remote processing). 1
INTFLUSH
To transfer the remaining part of a job to Job Control after flushing due to VSE/POWER-internal reasons.1
ISEP
To enforce identical separator pages for all printed output of local list tasks.1
ISEPSAS
To enforce identical separator pages for all output requested by Spool Access Support (SAS) or Device Service (DST) tasks1
JCMQ
To change the default size of the job completion, job generation, and output generation messages queue. 1
LOGEQNO
To ignore suppression of SYSLOG data.1
LONGCMD
To restrict usage of the specified command to the long form only.1
LST0DAT
To suppress list queue entries which contain non-printable data. 1
NETBTRNC
To suppress truncation of trailing blanks when entries are received by PNET, which originated at a non-VSE/POWER node.1
NORUN
To identify jobs in progress whenever the system fails.1
OPNDST
To raise the default time interval for reattempting PNET/SNA connections.1
OUTEXIT
To enable passing control to a user OUTEXIT phase for Spool-Access GET requests to the list and punch queue.1
PALTER
To change local and transmission disposition simultaneously.1
PDUMP
To ignore SETPRT requests originating from PDUMP and avoid segmentation of dumps.1
PNET
To have VSE/POWER use a Network Definition Table (NDT) that is different from the one defined in the POWER macro
RBF
To specify the maximum number of output records for each LST/PUN device spooled to disk by any job.
RSCSROOM
To transfer CP distribution code to VM/CP via PNET.1
SEARCH
To activate alternative search for generic jobname.
SECAC
To enable or inhibit activation of Spool Access Protection of eligible spool entries.1
SECNODE
To switch to another name of the security zone than defined in the POWER macro.
SEGCHECK
To enable the RJE Workstation Program to do segmentation.1
SJECL
To enable replacement of the alternate JECL prefix.1
SKIP
To have VSE/POWER insert a skip to channel 1.1
SORTFNOFF
To disable forms-grouping of LST and PUN queue entries for the specified classes and enable forms-grouping for all other classes.
SORTFNON
To enable forms-grouping of LST and PUN queue entries for the specified classes and disable forms-grouping for all other classes.
SYSID
To replace the shared spooling system ID specified in the POWER macro
WORKUNIT
To enable multi-processor support in VSE/POWER.1
1QZ2A
To suppress the '1QZ2A' message header of CICS® and PSF messages.1
1Q30D
To request operator prompting at abnormal termination time.1
1Q41I
To suppress the message '1Q41I' if the device type at spooling time intentionally differs from that used for actual print/punch.1
1R33D
To suppress operator prompting by message 1R33D when an incorrect JECL statement is found at execution time.1
1R88I
To force '1R88I OK' messages to be returned to the XPCC application, when the XPCC application is the originator of the command.1
**LINE
To define the number of asterisk lines printed over the perforation.1
Note:
  1. For these start-up control values, no corresponding POWER macro operands are available.
  2. The majority of the SET statements are used to control job execution or output printing. Therefore, in shared spooling or PNET networking environments, make sure that not only the receiving node but more importantly the executing or printing node specifies the desired SET statements.

SET statements, if used in your autostart procedure, must follow immediately the // EXEC powerphase statement.