zfcp
Messages with a prefix zfcp are issued by the SCSI-over-Fibre Channel
device driver (zfcp device driver) for the QDIO-based IBM® Z
SCSI-over-Fibre Channel adapter. The zfcp device driver supports Fibre Channel-attached SCSI devices
on Linux on Z .
zfcp.000866 <bus ID of the zfcp device> : The FCP adapter cannot support more NPIV portszfcp.00beaa <bus ID of the zfcp device> : ERP failed for unit 0x<LUN> on port 0x<WWPN> zfcp.01a8f2 <bus ID of the zfcp device> : All NPIV ports on the FCP adapter have been assignedzfcp.020115 <bus ID of the zfcp device> : Registering port 0x<WWPN> failedzfcp.058803 <bus ID of the zfcp device> : FCP adapter maximum QTCB size (<maximum supported size> bytes) is too smallzfcp.069af1 <bus ID of the zfcp device> : Access denied to LUN 0x<LUN> on port 0x<WWPN> zfcp.0cf3fa <bus ID of the zfcp device> : Creating an ERP thread for the FCP device failed.zfcp.10efb5 <bus ID of the zfcp device> : Opening WKA port 0x<destination ID of the WKA port> failedzfcp.128ff1 <bus ID of the zfcp device> : The WWPN assignment file on the FCP adapter has been damagedzfcp.17ac1c <bus ID of the zfcp device> : Attaching the name server port to the FCP device failedzfcp.19bff2 <bus ID of the zfcp device> : Incorrect CDB length <value in length field> , LUN 0x<LUN> on port 0x<WWPN> closedzfcp.219537 <bus ID of the zfcp device> : The fibre channel fabric does not support NPIVzfcp.25b968 <bus ID of the zfcp device> : Shared read-write access not supported (unit 0x<LUN> , port 0x<WWPN> )zfcp.29fa1a <bus ID of the zfcp device> : The adjacent fibre channel node does not support FCPzfcp.2a747e <bus ID of the zfcp device> : No handle is available for LUN 0x<LUN> on port 0x<WWPN> zfcp.2c93b9 <bus ID of the zfcp device> : The FCP adapter only supports older control block versionszfcp.306272 <bus ID of the zfcp device> : The FCP adapter reported a problem that cannot be recoveredzfcp.307c0c <bus ID of the zfcp device> : FCP device not operational because of an unsupported FC classzfcp.308f45 <bus ID of the zfcp device> : The mode table on the FCP adapter has been damagedzfcp.3c369f <bus ID of the zfcp device> : Incorrect CDB length <value in length field> , unit 0x<LUN> on port 0x<WWPN> closedzfcp.3dff9c <bus ID of the zfcp device> : Setting up the QDIO connection to the FCP adapter failedzfcp.41ca31 <bus ID of the zfcp device> : Oversize data package, unit 0x<LUN> on port 0x<WWPN> closedzfcp.4a463f <bus ID of the zfcp device> : ERP failed for remote port 0x<WWPN> zfcp.4c0e02 <bus ID of the zfcp device> : The FCP adapter does not recognize the command 0x<command> zfcp.4fed50 <bus ID of the zfcp device> : Exclusive read-only access not supported (LUN 0x<LUN> , port 0x<WWPN> )zfcp.566303 <bus ID of the zfcp device> : The CHPID for the FCP device is offlinezfcp.56747f <bus ID of the zfcp device> : The adjacent switch cannot support more NPIV portszfcp.574d43 <bus ID of the zfcp device> : ERP cannot recover an error on the FCP devicezfcp.5cd78f zfcp.63f95d <bus ID of the zfcp device> : Registering unit 0x<LUN> on port 0x<WWPN> failedzfcp.646ca0 <bus ID of the zfcp device> : QTCB version 0x<requested version> not supported by FCP adapter (0x<lowest supported version> to 0x<highest supported version> )zfcp.657cf6 <bus ID of the zfcp device> : Setting up data structures for the FCP adapter failedzfcp.6dbb23 <bus ID of the zfcp device> : Incorrect direction <value in direction field> , LUN 0x<LUN> on port 0x<WWPN> closedzfcp.7059a3 <bus ID of the zfcp device> : 0x<status information> is not a valid transfer protocol statuszfcp.747e7d <bus ID of the zfcp device> : LUN 0x<LUN> on port 0x<remote port WWPN> is already in use by CSS<channel subsystem ID> , MIF Image ID <MIF Image ID of the LPAR> zfcp.772dc6 <bus ID of the zfcp device> : Unknown or unsupported arbitrated loop fibre channel topology detectedzfcp.787564 <bus ID of the zfcp device> : A port opened with WWPN 0x<expected WWPN> returned data that identifies it as WWPN 0x<reported WWPN> zfcp.79e992 <bus ID of the zfcp device> : Exclusive read-only access not supported (unit 0x<LUN> , port 0x<WWPN> )zfcp.7d0b42 <bus ID of the zfcp device> : The FCP device has been detachedzfcp.7d6999 <bus ID of the zfcp device> : There is no light signal from the local fibre channel cablezfcp.7f96f9 <bus ID of the zfcp device> : The name server reported <number of words in residual data> words residual datazfcp.82bb71 <bus ID of the zfcp device> : The FCP device did not respond within the specified timezfcp.87c4d0 <bus ID of the zfcp device> : The error threshold for checksum statistics has been exceededzfcp.8a704c <bus ID of the zfcp device> : Access denied according to ACT rule type <access rule type> , rule <access rule> zfcp.8bdb34 <bus ID of the zfcp device> : ERP failed for LUN 0x<LUN> on port 0x<WWPN> zfcp.92ac85 zfcp.9b70c0 <bus ID of the zfcp device> : Not enough FCP adapter resources to open remote port 0x<WWPN> zfcp.9d2550 <bus ID of the zfcp device> : SCSI device at LUN 0x<LUN> on port 0x<WWPN> opened read-onlyzfcp.9d2a6b <bus ID of the zfcp device> : There is a wrap plug instead of a fibre channel cablezfcp.a9953d <bus ID of the zfcp device> : The FCP device is suspended because of a firmware updatezfcp.ac341f <bus ID of the zfcp device> : The local link has been restoredzfcp.ad5387 <bus ID of the zfcp device> : Registering the FCP device with the SCSI stack failedzfcp.afba9a <bus ID of the zfcp device> : The link between the FCP adapter and the FC fabric is downzfcp.b2d959 zfcp.b2ef0a <bus ID of the zfcp device> : The FCP device is operational againzfcp.c0fd29 <bus ID of the zfcp device> : Shared read-write access not supported (LUN 0x<LUN> , port 0x<WWPN> )zfcp.c2c546 <bus ID of the zfcp device> : The FCP adapter could not log in to the fibre channel fabriczfcp.cf1c58 <bus ID of the zfcp device> : The QTCB type is not supported by the FCP adapterzfcp.cfb51a <device specification> is not a valid SCSI devicezfcp.d34e30 <bus ID of the zfcp device> : Access denied to unit 0x<LUN> on port 0x<WWPN> zfcp.d4aea8 <bus ID of the zfcp device> : 0x<request ID> is an ambiguous request identifierzfcp.dda2e3 <bus ID of the zfcp device> : The FCP device detected a WWPN that is duplicate or not validzfcp.de56fd <bus ID of the zfcp device> : A QDIO protocol error occurred, operations continuezfcp.e78dec <bus ID of the zfcp device> : A QDIO problem occurredzfcp.ea662c <bus ID of the zfcp device> : Access denied to port 0x<WWPN> zfcp.f16820 <bus ID of the zfcp device> : The FCP adapter only supports newer control block versionszfcp.f4dc96 <bus ID of the zfcp device> : Incorrect direction <value in direction field> , unit 0x<LUN> on port 0x<WWPN> closed