Installing the
TS7650G (Gateway), ProtecTIER V3.3.6
The topics in this section cover installation for the
TS7650G (Gateway), ProtecTIER® V3.3.6
Overview of the TS7650G (Gateway), ProtecTIER V3.3.6
Configurations that use IBM hardware for the TS7650G (Gateway), ProtecTIER V3.3.6
Installing the hardware for the TS7650G (Gateway), ProtecTIER V3.3.6
You must install the
TS7650G
servers and other required components into the customer-supplied 36u frame and make all required power and cable connections.
Setting up the TSSC for use with theTS7650G (Gateway), ProtecTIER V3.3.6
Before the TSSC can be used to support the gateway, you must first configure the TSSC Call Home, firewall, and network communications settings.
Enabling ProtecTIER RAS functions for the TS7650G (Gateway), ProtecTIER version 3.3.6
ProtecTIER RAS was installed during manufacturing. However, it must be enabled for the
TS7650G
server to interact with the TSSC for Call Home, log collection, and system health monitoring.
Configuring Server A for the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3.3.6
Installing ProtecTIER Manager on workstations for the TS7650G (Gateway), ProtecTIER V3.3.6
Creating repositories for the TS7650G (Gateway), ProtecTIER V3.3.6
Configuring Server B for the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3.3.6
Validating the servers for the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3.3.6
Applying fixes to update the ProtecTIER software for version 3.3.6 and higher
After you validate the servers, you might need to install updates to
ProtecTIER
for fixes and other updates.
Releasing the TS7650G (Gateway), ProtecTIER V3.3.6 system to the customer
After you complete installation of the
TS7650G (Gateway), ProtecTIER V3.3.6
, you must turn the system over to the customer.
Parent topic:
Installing the TS7650 Appliance or TS7650G (Gateway), ProtecTIER V3.3.6