This SRC might indicate a communications error.
Find the unit reference code in the following table. For more on the Failing Item column entries, see Table 2. Failing items details, which follows the reference code table below.
Table 1. (B025) Reference codes
| Reference Code | Description/Action Perform all actions before exchanging Failing Items | Failing Item |
|---|---|---|
| A000 | Input value error in I/O card Licensed Internal Code | |
| A001 | Input value error in I/O card Licensed Internal Code | |
| A013 | Wrong configuration data given to Ethernet controller | |
| A01B, A209 | Input value error in I/O card Licensed Internal Code | |
| A404 | Ethernet adapter card error | |
| A6D5 to A6D6 | Wrong configuration data given to Ethernet controller | |
| A6D9 | Ethernet adapter card error | |
| A6E3 | Ethernet adapter or network device cabling error. | |
| A6F2 | Configured line speed not supported by network. | |
| A6F3 | Configuration of DUPLEX parameter not supported by network. | |
| A6F4 | Unable to establish a network link. | |
| A800 | MAXFRAME value in CRTLINETH command too large. |
CTPLPDU |
| A801 | Adapter does not support user-configured adapter address |
CTPNADR |
| B000 | System log entry only, no service action required |
|
| B001 | Automatic recovery has been attempted on the ethernet port
This error is logged for information only. No service action is required. |
|
Table 2. Failing items details
| Failing Item | Description | Document Description |
|---|---|---|
| AJDG301 | Licensed Internal Code | Service Functions; APAR or LICTR |
| AJDG301 | Licensed Internal Code | See the service documentation for instructions. |
| AJDGP01 | I/O card Licensed Internal Code | See the service documentation for instructions. |
| AJDGP01 | I/O card Licensed Internal Code | See the service documentation for instructions. |
| AJDGP01 | I/O card Licensed Internal Code | See the service documentation for instructions. |
| CTPLPDU | MAXFRAME value in CRTLINETH command | Communications Configuration |
| CTPNADR | ADPTADR value in CRTLINETH command | Communications Configuration |
| IOA | Ethernet network adapter card | Repair and Parts; removal and installation procedures |
| IOP | I/O processor card | See the service documentation for instructions. |
| UJE35 | SSAP value in CRTLINETH command | Communications Configuration |
| UJE35 | MAXCTL value in CRTLINETH command | Communications Configuration |
| UJE35 | LINESPEED value in CRTLINETH command | Communications Configuration |
| UJE35 | DUPLEX value in CRTLINETH command | Communications Configuration |
| UJE36 | LANACKFRQ value in CRTCTL_____command | Communications Configuration |
| UJE36 | DSAP value in CRTCTL_____command | Communications Configuration |
| UJE39 | Remote computer equipment | Communications Configuration |
| UJE40 | Network Termination, Network or Network devices | |
| USER | User suspected communications problem. |