Modified on by Isayas Sium
Q Replication Tips for Beginners
If you are new to Q Replication, you may be interested in some tips on making sure your first configuration is successful. This blog is for you. It is a list of tips and includes links to help you successfully configure, deploy and monitor a typical Q Replication scenario.
This blog assumes you've read the post titled A Fast Way to Get Started with Q Replication for DB2 Active-Active Database. For example, this post assumes that you are running replication between two systems as shown in the picture below. However the tips here apply to any Q Replication configuration:
The tips fall into four basic categories:
Use the InfoSphere Data Replication Dashboard!
Validate your WebSphere MQ ('MQ') setup
Validate your DB2 setup (for users new to DB2)
Reset your Q Replication Environment!
Expanding our Picture...
In system 1 and system 2, the DB2 instances, Q Capture/Q Apply pairs and MQ managers communicate with each other as shown in the diagram below:
The DB2 database names, MQ manager names and MQ port numbers in the diagram above are also referenced in the tips sections below (Tips #2 and #3). Q Replication tutorial can be found here
Tip #1: Use the InfoSphere Data Replication Dashboard!
Follow the InfoSphere Data Replication Dashboard Install Procedures to install the InfoSphere Data Replication Dashboard on one of your systems. Installation is quite fast and simple, and footprint (including embedded web server) is small.
Just open a web browser window pointing to the URL defined as part of the installation steps and the Q Replication Dashboard will give you:
easy access to a consolidated view of all your Q Replication configurations
for each configuration, live monitoring graphs display metrics like log latency, Q Capture throughput, etc.
for each configuration, at-a-glance status: drill-down from Q Capture or Q Apply to Q subscription status and access DB2, MQ or Q Replication on-line Information Center topics as needed
Tip #2: Validate your MQ Setup!
The post named A Fast Way to Get Started with WebSphere MQ shows you how to use the ASNCLP CREATE MQ SCRIPT command to create MQ definitions for your active-active configuration. The command returns two MQ scripts, one script for system 1 and one script for system 2. Each script creates an MQ queue manager and its related MQ definitions. This section includes some tips on how to use the create mq script command. It also lists a few tools you will want to use to validate your MQ setup, should you encounter some problems.
Guidelines on how to use the ASNCLP 'CREATE MQ SCRIPT' command:
Do not use 'localhost' value as the mqhost parameter. Use the actual ip address or host name (site1.xx.com for mqserver 1 and site2.yy.com for mqserver 2). 'local' is a meaningless concept in bidirectional environments and creates problems.
If your test environment has a small file system, review the parameters associated with the crtmqm command in each MQ script output file. The '-lp' and '-lf' parameter values may be too large as the MQ log file sizes generated by ASNCLP assume a production environment. If necessary, update the values in each MQ script file before running the script.
Do not update the output MQ script before running it other than the crtmqm command parameters above. For example, each MQ transmit queue definition in a given MQ script output points to the other system's MQ listener port number and should not be changed.
In some cases, you may be asked to reuse an existing MQ environment: an MQ queue manager and possibly MQ administration and restart queues for a Q Capture server. If that is the case, you won't be able to use the ASNCLP script commands as provided and will need to make some updates. This may be error-prone so this section lists various tools and tips to validate and correct your MQ setup for your active-active configuration.
Tools you will want to use to validate (and correct) an MQ configuration for Q Replication:
WebSphere MQ Explorer
- at-a-glance list of all your MQ managers
- MQ queue manager status, channels, queues definition, listener port information etc.
ASNCLP 'Validate MQ Queues' command
- validates that your MQ definitions are correctly set up for a bidirectional scenario
- is described in the post A Fast Way to Get Started with Q Replication for DB2 Active-Active Database
- catches setup error that occurs with the administration queue; for example, the
DB2 ASN.IBMQREP_RECVQUEUES.ADMINQ column value on system 1 (or system 2)
should be the same as the local MQ administration queue name defined on
system 2 (or system 1); it should never match the local administration queue
name in the DB2 ASN.IBMQREP_CAPPARMS.ADMINQ column value on
system 1 (or system 2). The ASNCLP validate function alerts you if that is the case
- validates that the two MQ managers defined for a Q Replication configuration can talk to each other by sending a test message between the two MQ queue managers
- note that the restriction stating that the Q Capture and Q Apply programs have to be stopped before doing the test has been lifted
- for more information on how to use the Replication Center to verify your MQ setup for Q Replication, watch the short video (seven minutes) that is available on ChannelDB2. If you use DB2 V10 and above, the Replication Center is available as a stand-alone DB2 center.
Tip #3: Validate your DB2 Setup!
If you are new to DB2 client/server configuration setup, review the guidelines below:
Update the DB2COMM environment variable on each system if it is not set to 'TCPIP'
Configure DB2's TCPIP communications on system 1 so that ASNCLP or any SQL command issued from a DB2 command window can access the SITE2 database on system 2.
Use a hostname instead of a dynamic IP address when you catalog the tcpip node for the remote DB2 (if you don't use static IP addresses) to prevent loss of connection over time. For example, on system 1, catalog the node for system 2 using site2.yy.com and port 50002.
ASNCLP runs on one system (system 1 in the active-active blog) and creates all the Q Replication definitions from that system. If you decide to run ASNCLP on system 2, you will need to catalog a tcpip node to access the SITE1 database from system 2.
In active-active configurations, the same table definitions must exist on each active site. The active-active blog uses the db2sampl command to create the same tables in SITE1 and SITE2. To ensure that all tables have the same schema, use the same userid to login to both systems.
Tip #4: Know How to Reset your Q Replication Environment!
If tables in the SITE2 database become out of synch with tables in the SITE1 database, you can reset your Q Replication environment by first stopping and then starting the corresponding Q subscriptions with the necessary load methods to populate the target tables:
If you need to reset your Q Replication environment for other reasons (some subscriptions in inconsistent state, messages were sent to a dead-letter queue or hardware failure could be some examples), use the Data Replication Dashboard's Recovery Advisor tab. It helps you troubleshoot and analyze your environment including four recovery scenarios. The remainder of this section highlights its key features.
Note that the information available in the Recovery Advisor is also available in the Troubleshooting section of the Q Replication Information Center.
The following features are available for you to reset your Q Replication environment:
A 'Help me troubleshoot' wizard (Start Analysis button) and Four Recovery Scenarios (pull-down menu options):
The option to save and exit of a given recovery scenario and complete some of the remaining steps later (click on the green button 'Recovery Steps and Scripts' pull-down menu option 'Save and Exit' on the upper right hand side corner - see image above)
The option to restart or delete a saved (recovery scenario) procedure (the table at the bottom of the Recovery Advisor main page lists all saved procedures - if the table is empty, as it is below, there is no procedure work to complete later):
Modified on by QUTY_Dylan_Murphy
IBM has a comprehensive new Redbook for Q Replication that should appeal to both new and long-time users. It builds on a Redbook published several years ago, but is not a simple dusting off of an old book. Instead, the writers took the time to pick the brains of experts at IBM's Silicon Valley Lab and add information that's never been published. They've also worked hard to make sure the entire Redbook is easily understood by new users. One example I like is this new graphic that shows the 10 factors that affect end-to-end data replication latency:
People always want to understand this stuff, but it's never been shown so clearly, especially the details around MQ. To make sure you follow the graphic, the Redbook discusses each numbered point individually. Another area I like is the chapter called "Managing Q Replication in a DB2 z/OS Environment". Lots of good stuff there. I believe it will be a huge help to mainframe shops that have Q Replication in production.
You can read or download the Redbook at the following link:
Understanding and Using Q Replication for High Availability Solutions on the IBM z/OS Platform
In the past, IBM always announced a new release of its Replication Server product on UNIX and Windows whenever it announced a new release of DB2 LUW. If the version changed, IBM also updated the version of Replication Server on z/OS. Neither of those changes happened when DB2 LUW v10 was released. What's more, IBM announced in late 2012
that its older data replication products, including Replication Server, would no longer being marketed. So, why's IBM doing this? And what happens to Replication Server's Q and SQL Replication?
Well, over the years, IBM provided its data replication technologies
through a lot of different products. For example, IBM had two major data replication products at the same time for several years - InfoSphere CDC and InfoSphere Replication Server. That was a little confusing,
even to some IBM people. To simplify sales, IBM consolidated all it's replication technologies into a single product called IBM InfoSphere Data Replication
(IIDR). This means that IBM didn't need to continue offering those technologies through the older products (InfoSphere CDC and InfoSphere Replication Server).
- Are the older products still being supported?
- Is IBM still providing the IIDR's Q and SQL Replication at no cost in certain DB2 LUW and InfoSphere Warehouse (ISW)?
- How do you upgrade from your old Replication Server on UNIX or Windows to IIDR?
- How do you upgrade your Replication Server on z/OS to IIDR?
If you have any questions, feel free to post them in the comments section of this blog.
I've been surprised recently by the number of people who still have an old IBM product called DataPropagator, or 'DProp'. More suprising is that they think they're at a dead end with no replacement. Nothing could be further from the truth. DataPropagator was a product name. Product names, as I'll show later, can change. However, the underlying technology remains. In DataPropagator's case, the technology inside it is what IBM calls SQL Replication. SQL Replication is alive and well. You can find it in several IBM products
For example, if you're on z/OS and currently running DB2 DataPropagator or DataPropagator Relational, the DProp function can now be found in the SQL Replication feature of WebSphere Replication Server v9.1 and InfoSphere Replication Server v10 as well as IBM's newer InfoSphere Data Replication product
. This is important information because, if you move to DB2 z/OS v9 or v10, you must upgrade to one of these newer replication products because they contain the only level of DProp function that supports the newer DB2s.
Getting back to the subject of name changes, here is a graphic that shows the transformation of 'DProp' names on z/OS.
What If You're Current on S&S?
You may want to know what you're entitled to if you had purchased DataPropagator and are current on S&S. The easy thing to do is to search IBM announcement letters
for 'datapropagator'... okay :) maybe it's easier said than done, so here's the ones that answer the question:
- IBM Withdrawal Announcement 908-016
- IBM Software Announcement 206-224
In a nutshell, they say that DataPropagator (v7 and v8) have been replaced by WebSphere Replication Server. v9. Of course, in 2010, v10 of Replication Server was released and its brand was changed to InfoSphere. Customers can move to Replication Server v10 if they are current on DataPropagator S&S.
The following lists add some comments about what else changed for each of these name changes:
This product replicated between DB2 databases.
A companion product, DataPropagator NonRelational, replicated data from IMS to DB2.
A little later, IBM's data federation product, DataJoiner, provided the basis for heterogeneous SQL Replication between DB2 and other relational databases.
This was the start of a new, improved implementation of SQL Replication.
The NonRelational product was renamed to IMS DataPropagator.
If anyone knows of anything I missed, feel free to add it to the comments :)
SQL Replication is an easy-to-learn data replication technology that's found in several IBM products. It satisfies many data replication needs and is especially good for the following:
However, there are times when IBM's Q Replication is the better choice. Primarily, Q Replication should be used when you need one or more of the following:
In other words, Q is the way to go for availability and high performance solutions.
Other posts in this thread:
In my previous post, I showed which IBM products contain Q and SQL Replication. However, I left one question unanswered. What's the difference between InfoSphere Replication Server and the IBM Homogeneous Replication Feature (HRF)? The answer is simple. The HRF is just a tool to license a subset of Replication Server found in DB2 Enterprise and InfoSphere Warehouse.
The HRF was introduced with DB2 9.5 and provides what's shown in the following table.
Licensing Differences - Replication Server vs the HRF
|Product||SQL Replication||Q Replication|
|InfoSphere Replication Server|| || || || |
|IBM Homogeneous Replication Feature|| |
In other words, Replication Server provides Q and SQL Replication for all types of databases - DB2, Oracle, and so on. That diversity of databases is what's called 'heterogeneous' replication. On the other hand, the HRF is a way to buy just the subset of Q Replication that's for DB2 databases. This subset is called 'homogeneous' because it licenses components for only one type of database - DB2.
This functional difference also means the HRF has a cheaper per PVU price. Or at least it still did when I started this post :) If you want to verify this yourself, check Passport Advantage or go to the product web pages on ibm.com and look at the features of DB2 ESE and the prices for Replication Server.
A related difference is that the HRF really is a feature instead of a product. As such, it can be purchased for any of the following IBM products:
This feature aspect also affects how you calculate the total cost of a replication purchase. Specifically, there is a metric called Processor Value Unit (PVU mentioned above) that is a factor in determining the overall price of a replication purchase. The metric is calculated differently for the HRF than for Replication Server.
- For the HRF, the metric is the same as the PVU count for the database for which the feature is purchased.
- I've always been told that DB2 features are based on the same PVU count as DB2 and are not charged for on warm standby systems. (DB2 people are always the best ones to verify the current state of charges for DB2 features.)
- There is no requirement to count the PVU of remote source or target databases (if you do remote capturing or remote applying with the HRF).
- For Replication Server, the metric is based on the system where the software runs, not the PVU rating of any source or target database.
The last point here is that Replication Server and the HRF are completely compatible. In other words, the Capture program in one can provide changed data to the Apply in the other and vice versa. The following picture is a very simple example that illustrates the compatibility of the two.
Replication customers who are using DB2 Version 9.1 for z/OS compatibility mode (CM) or lower and want to upgrade from WebSphere Replication Server V9.1 to InfoSphere Replication Server V10.1 must ask their IBM sales representative to request a copy of the software through the IBM z/OS archive-retrieval process.
IBM has removed all Replication Server products from marketing, and the Q Replication and SQL Replication technologies are now part of IBM InfoSphere Data Replication for z/OS.
WebSphere Replication Server V9.1 is scheduled to be withdrawn from support in September 2014. However, customers who want to upgrade to the newest version of Q Replication or SQL Replication in InfoSphere Data Replication V10.2.1 must be running DB2 V9.1 for z/OS new function mode (NFM) or higher.
If you are running with DB2 V9.1 for z/OS CM or lower, you need to request InfoSphere Replication Server V10.1 (5655-IRS) through the archive-retrieval process. Replication Server V10.1 is not available from Shopz. You must be current on IBM Software Subscription and Support to move from Replication Server V9.1 to Replication Server V10.1.
Ask your sales representative to use the Withdrawn Order Process and Template for Archived Product Code. You can point them to more information at the following internal IBM website: https://w3-connections.ibm.com/blogs/dbafaebb-0ed1-4425-8396-47f73dbb57f6/entry/is_replication_server_v10_z_os_still_available_to_current_replication_server_v9_customers?lang=en.
For more information about migrating to Q Replication and SQL Replication Version 10.2.1, see this presentation.
I have just published a blog entry on the z/OS Platform Evaluation Test (zPET) team's blog regarding the use of IBMQREP_IGNTRAN and insert_bidi_signal=n. For anyone interested, you can find it here: zPET Blog Entry - IGNTRAN
I was having issue when trying to connect to my database (DB2 v10.1.0.3", "s130918", "IP23509", and Fix Pack "3") having authentication as DATA_ENCRYPT using IIDR replication dashboard.
Has anyone come across this issue , is there any work around for this.
I've recently posted a problem with a dpropr update anywhere configuration not replicating from the source to the master. That is being addressed. The purpose of this post is how to replicate db2xml columns. (DB2XML has been replaced with purescale xml)
My questions are centered around purescalexml. Given that we need to convert from db2xml to purescale xml:
1) is there a reference guide on how to convert db2xml to purescale xml?
2) purescale xml is defined to a db2 table as data type xml
-- is data type xml supported by dpropr (sql replication, qrep, or HADR). The replication guide. states db2 xml not supported, but is this db2xml or purescale xml data type?
replication manual data type restrictions
Data type restrictions
SQL Replication cannot replicate the following data types:
v DB2 XML
Recently a dpropr (sql replication) v10.1 was setup in an update anywhere configuration. A refresh was done from the master databases (whos_on_first='S')
I performed the following tests that show replication from the master to the replica works, but replication from the replication does not work. Because the replica capture read the change and inserted the record to the associated CD table, I believe the issue is with the apply whos_on_first='F'
performed table refresh to verify in update anywhere refreshed from master tables to replica tables. This was succesful.
changed a table row on master table (whos_on_first='S'). Data replicated to replica table.
on replica table updated the same row changing the value back to its original master table value.
-- Capture read the change to the cd table
-- Applytrail shows no data for whos_on_first='F replicating to the master table, though it shows successfull replication cycles.
How do I resolve and get the dpropr apply whos_on_first='F' to replicate data back to the master table?
My shop has IMS DPROP for propagation of IMS data to DB2 z/OS. As it is no longer being marketed and EOS unclear, I am looking at the recommended IBM replacement: Infosphere; specifically Infosphere IMS replication for z/OS and Infosphere Data Replication for DB2 z/OS. Is there any information on the relative performance of Ithese nfosphere Data Replication products versus IMS DPROP ?
We have various QREPLICATION Peer to Peer setups, with some tables over 20 gb in size. There are times we have identified were the two sets of tables need to be synchronized. What we have been doing is running ASNTDIFF / ASNTREP on one set of the tables, and then repeating the process on the other set of tables.
Because of the size of the tables we have found that ASNTDIFF / ASNTREP is an inefficient process to get the qreplication peer to peer tables synchronized.
Does anyone have any alternative, performance oriented solution to ASNTDIFF / ASNTREP?
Modified on by DavidT
With a mere 4 weeks until IBM's 2013 Information on Demand, the data replication team thought it might be helpful to have a complete listing of all data replication sessions at IOD. From client presentations and our product roadmap to sneak peeks at new IBM Data Replication functionality, our sessions run the gamut!
Simply take a gander at the sessions below then go to the IOD agenda builder, click on Create Sign In, and then enter your confirmation number and the email address that you used to register for the conference. Create your agenda today!
This post is the answer to one of the FAQs found in License Tips for IBM Data Replication
If you download IBM products from Passport Advantage (PPA), you may now have access to IIDR but don't know why. The reason may be that all of the following conditions are true for your shop:
- You had an older IBM replication product on UNIX, Windows, or System i.
- You were current on S&S (subscription and support).
- You were unaware of the automatic conversion to IIDR on March 12, 2013 :)
If you don't understand, keep reading... In December of 2012, IBM announced that it would no longer market the following three data replication products after March 11, 2013:
- InfoSphere CDC
- InfoSphere Replication Server
- InfoSphere Data Event Publisher
The announcement also said that IBM InfoSphere Data Replication (IIDR) would be the replacement product. IIDR contains all replication technologies from all three of the older products
. However, the announcement did not say how you get IIDR if you already own one or more of the older products. Well, it turns out that IBM automatically converted your older product(s) on UNIX, Windows, or System i to IIDR on March 12, 2013 as long as you were current on S&S. There was no announcement. The only way you'll see this is if you look in your PPA account. It should now list IIDR.
If you are unfamiliar with IBM's changes to its data replication portfolio, see either of the following posts for more information:
Feel free to post comments if you have questions.
The absolute best answer to this question is in the IBM Distributed Software Licensing Reference Guide. It can be downloaded from the Passport Advantage Licensing home page on ibm.com
(see picture below). The document contains a general discussion about Hot, Warm, and Cold Standbys for IBM distributed software. While it does not mention IBM InfoSphere Data Replication (IIDR) specifically, the discussion applies to IIDR because IIDR does not have its own unique license terms in regards to standby servers. If you read the guide and have a question in relation to IIDR, feel free to post it in the comment section of this blog entry.
The following is an excerpt from that document as of the date of this post. It's just here just to give you a feel for what to look for in the Reference Guide. You shouldn't view this post as a replacement for reading the Guide since the Guide could change .
A new WebSphere MQ enhancement may give Q Replication a significant throughput boost in those situations where you have either (1) workload spikes that increase replication latency or (2) changed data that has built up in queues because of the temporary unavailability of a target database. The new feature is tailored for the sequential access of messages and causes MQ to read messages into the MQ buffer before the messages are needed. This method lets both the Q Apply program and MQ channel agents pull messages from memory instead of disk.
Why is this possible? When the number of messages overruns the buffer pool allocation for the queue, messages are spilled to disk and must then be retrieved from disk when needed. With the read-ahead enhancement, messages can be in memory. In addition to greatly improving throughput in these situations, the enhancement lowers overall replication latency. This new MQ feature also benefits performance at the source transmission queue.
In our test, we achieved the 55 percent increase in rows per second processed by Q Apply on a DB2 for z/OS Version 9 non-data sharing system with Q Replication Version 10.1 and WebSphere MQ Version 7. The average message size for the test was 50K. We have observed significantly higher improvements in replication throughput with smaller messages, for example 10K. Your throughput numbers could be noticeably different from these because replication performance can be heavily influenced by environment, row lengths, replication configuration, and more.
The buffer pool read ahead enhancement is available starting with WebSphere MQ V7 APAR PM63802. You can enable the function by issuing the following MQSC command:
RECOVER QMGR(TUNE READAHEAD ON)
You can add the read ahead function to both the source and target queue managers for optimal performance. No changes are required to your Q Replication environment to take advantage of this feature.
For more information, see the text for APAR PM63802
IBM's Data Replication
product (IIDR) is now part of IBM's Request for Enhancement (RFE) community
. This gives you [the customer] an opportunity to collaborate directly with the IBM product development teams and other product users. That's a quote from the RFE Community site. If you're not familiar with RFE, the site's main page has FAQs, tutorials, and more to help you get started. Once you're ready to go, InfoSphere Data Replication is found under IBM's Information Management brand
along with products such as DB2 for z/OS. From the RFE main page, simply click on "Information Management" in the "Brands" box on the right After that, you'll see a pull-down that will let you select IIDR. Click the arrow on the right. Once you have IIDR, click Submit RFE:
If you browse IIDR requirements today (as of this post), you'll only see a few RFEs since this is new. You change that by submitting a requirement :) Once you start that process, you'll need to select a component and so on. The following screenshot shows some of what you'll need to provide:
Notice that the components are not specific to a technology such as Q Replication or CDC. You can add information about that in the description or use case. Have fun :)
I've gotten this question a lot lately. It's usually from people who want to move from DB2 ESE to DB2 Advanced ESE (AESE). They want an answer from both a technical perspective (will I need to migrate?) and a licensing perspective (do I still need my current replication product?). The answer to these questions, like the answer to so many other questions, is :) "it depends." I'll use this post to cover the points from both perspectives.
You need to answer one question - are you changing versions of DB2 when you upgrade to DB2 AESE? For example, are you moving from DB2 ESE 9.7 to DB2 AESE v10? If the answer is, no, you are not changing your DB2 version, then the answer to the Q Replication question is, no, Q Replication is not affected by the upgrade to DB2 AESE. This is because AESE changes DB2 license terms related to Q Replication, not the DB2 install, the Q Replication code, or the DB2 function that Q Replication uses.
On the other hand, if your answer is, yes, you are changing DB2 versions, then the change will likely require a migration of Q Replication. To know for sure, you need to consider whether you're using the copy of Q Replication in your DB2 install or a separate copy of Q Replication that was installed through a product such as InfoSphere Replication Server (IRS) or IBM InfoSphere Data Replication
- The other case is that the you installed a separate copy of IRS or IIDR and are using the Q Replication in it to work with your DB2 instance. For this case, the Q Replication code only needs to be upgraded if it is capturing changes from DB2 v10 (applying changes to DB2 is not affected). Again, see the DB2 v10 Information Center for information about upgrading/migrating Q Replication.
One of the major benefits of upgrading to DB2 AESE is that you get two- or three-site Q Replication at no additional cost. That's important to licensing because, before DB2 AESE, you had to purchase Q Replication for DB2 through one of three products - the IBM Homogeneous Replication Feature (HRF), InfoSphere Replication Server (IRS), or IBM InfoSphere Data Replication (IIDR). The question is - do you still need to maintain a license for a data replication product? The answer depends on the configurations you've built with Q Replication. Specifically, the DB2 AESE license covers your current Q Replication needs for a given DB2 AESE server if you are using the Q Replication in DB2 AESE and one of the following is true:
- Your DB2 AESE server is 9.7 and you are only replicating with one other DB2 LUW server (of any release).
- Your DB2 AESE server is v10, and you are replicating with no more than two other
DB2 LUW servers (of any release).
Over the years, IBM has provided its data replication technologies through a lot of different products. That can be a little confusing, even to some IBM people :) So, to simplify things, IBM has consolidated it's replication technologies into a single product
. It's called IBM InfoSphere Data Replication (IIDR). To go along with that, IBM is also reducing the number of products it uses to sell those technologies. That affects the IBM Homogeneous Replication Feature (HRF) for DB2.
To be clear, the HRF was an alternate way to buy Q Replication
for DB2 LUW and InfoSphere Warehouse (ISW), 9.5 and 9.7. That is no longer available for new purchases. The same is true for v10. The affect on you depends on whether you are (1) new to Q Replication with DB2/ISW or (2) an existing 9.5 or 9.7 HRF customer:
- If you are new to Q Replication, you have two choices:
- Upgrade to DB2 Advanced ESE (AESE) or ISW. This the best alternative if all of your replication is between
DB2 LUW and/or ISW servers and your configuration meets requirements. For more information, see the post titled Is Q Replication Free?
- Purchase IIDR*. You will need IIDR if your DB2 LUW replicates with DB2 z/OS, a heterogeneous source or target (e.g., Oracle), or with more sites than allowed by DB2 AESE or ISW.
- If you are an existing HRF customer, you can still buy support ("S&S") for it and activate in DB2 LUW v10. You also have the option of trading up to the full IIDR product. You can do this with a special trade-up feature (part number D0P64LL) that was added to IIDR in its 10.1.3 announcement.
* Alternatively, InfoSphere Replication Server (IRS) is still available for use with DB2 LUW 9.5 and 9.7. However, IRS is not available for DB2 LUW v10. You must use IIDR with DB2 LUW v10.