Hardware Model Support in z/OS Release 7 RMF
MartinPacker 11000094DH Visits (1032)
This probably counts as my contribution to RMF for this decade. :-)
RMF has long had the
With z990 it
In z990 (and z9-109) studies we would know, for example, that the processor was a z990 Model 324 but wouldn't be absolutely sure whether it was a 3-book or a 4-book machine. With a 324 there's nowhere to go without installing a fourth book - if you needed to add processors. And we, frustratingly wouldn't know that.
Now, with Release 7 RMF we get the hardware model in addition to the software model. So we expect in future engagements to be a little more sensitive to what it would take to upgrade.
Actually here's what you could do today - on Release 6 or prior...
The Logical Processor Sections in the SMF 70 record do record under the
I wrote those in 2-digit hex format for a reason: The first digit is the book number.
So where's Book 1, then?
It doesn't exist. So I conclude this is a C24 (3-book) machine.
If this was your machine you'd probably be saying
One other thing: You can tell what the engine type is from these sections. In this case they're all General-Purpose CPs (GCPs) and that corresponds to what we happen to know about the client: 2 12-way dedicated LPARs and no ICFs, IFLs or zAAPs.
Now none of that is an "intended interface" but it is fascinating. :-) But you are much better off with the 1.7 support for Hardware Model.