Last July, IBM and EMC traded blog postings over SPC-1 benchmark results. Fellow EMC bloggerChuck Hollis wrote his post [Does Anyone Take The SPC Seriously?
]. Here is an excerpt:
I think most storage users have figured this out. We've never done an SPC test, and probably will never do one. Anyone is free, however, to download the SPC code, lash it up to their CLARiiON, and have at it.
I responded with [Getting Under EMC Skin], and then followed up with a series explaining IBM SVC and SPC benchmarks here:
So what is the good news?Yesterday, our friends at NetApp took up Chuck's challenge and posted results on their FAS3040 as well as their EMC CLARiiON devices. IBM sells the FAS3040 under the name IBM System Storage N5300 disk system. Knowing that NetApp maintains excellent performance when it is doing point-in-time copies, NetApp ran both with and without on both boxes. I include DS4700 and DS4800 as well for comparison purposes, but only have them without FlashCopy running.
|IBM DS4800||No FlashCopy||45,014|
|NetApp FAS3040 (IBM N5300)||No SnapShot||30,985|
|NetApp FAS3040 (IBM N5300)||With SnapShot||29,958|
|EMC CLARiiON CX3-40||No SnapDrive||24,997|
|IBM DS4700 Express||No FlashCopy||17,195|
|EMC CLARiiON CX3-40||With SnapDrive||8,997|
One would expect some performance degradation with a box running point-in-time copies at the same time it is reading and writing data, but NetApp/IBM N5300 does not degrade by much, but EMC's drops a significant amount.
So what is the bad news? Last October, I welcomed HDS USP-V to the [Super High-End Club], but now we need to invite Texas Memory Systems as well.In 2006, I posted [Hybrid, Solid State and the future of RAID], and poked fun at Texas Memory Systems using the slogan "World's Fastest Storage", which at the time that honor belonged to IBM SAN Volume Controller instead.The VP of Texas Memory Systems, Woody Hutsell, explained the only reason their solid-state disk system, RAMSAN-320, didn't have faster results is that they didn't have the fastest IBM server to run against it. It may not surprise you that nearly everyone's SPC benchmarks use IBM servers because IBM has the fastest servers as well. I didn't have a million-dollar System p UNIX server to send Woody for this, but it looks like they have finally gotten one, and a new RAMSAN-400 device, as they have posted their latest results.
|Texas Memory Systems RAMSAN-400||Cache only||291,208|
|IBM SAN Volume Controller 4.2||Cache/External Disk||272,505|
|HDS USP-V||Cache/Internal Disk||200,245|
EMC doesn't publish numbers for their Symmetrix box, despite their announcement of faster SSD drives. They claim that SSD drives make their overall disk system performance faster, but without SPC benchmarks, we will never know. If you have a Symmetrix, this YouTube video may help you decide where it belongs:
You can read all the[SPC-1 Benchmark Results]on the Storage Performance Council (SPC) website.
technorati tags: IBM, EMC, Chuck Hollis, SPC, SPC-1, NetApp, FAS3040, N5300, CLARiiON, CX3-40, SnapShot, SnapDrive, FlashCopy, DS4800, DS4700, Texas Memory Systems, RAMSAN-320, RAMSAN-400, SSD, Hybrid, RAID, HDS, USP-V, Symmetrix,
Wrapping up this week's theme on the XO laptop, I decided to take on thechallenge of printing. I managed to print from my XO laptop to my laserjet printer.I checked the One Laptop Per Child [OLPC
] website,and found there is no built-in support for printers, but there have been several peopleasking how to print from the XO, so here are the steps I did to make it happen.
(Note: I did all of these steps successfully on my Qemu-emulated system first, and then performed them on my XO laptop)
- Step 1: Determine if you have an acceptable printer
The XO laptop can only connect to a printer via USB cable or over the network.Check your printer to see if it supports either of these two options. In my case, my printer is connected to my Linksys hub that offers Wi-Fi in my home.
The XO runs a modified version of Red Hat's Fedora 7, so we need to also determineif the printer is supported on Linux.Check the [Open Printing Database]for the level of support. This database has come up with the following ranking system.Printers are categorized according to how well they work under Linux and Unix. The ratings do not pertain to whether or not the printer will be auto-recognized or auto-configured, but merely to the highest level of functionality achieved.
- Perfectly - everything the printer can do is working also under Linux
- Mostly - work almost perfectly - funny enhanced resolution modes may be missing, or the color is a bit off, but nothing that would make the printouts not useful
- Partially - mostly don't work; you may be able to print only in black and white on a color printer, or the printouts look horrible
- Paperweight - These printers don't work at all. They may work in the future, but don't count on it
If your printer only supports a parallel cable connection, or does not have a high enough ranking above, go buy another printer. The [Linux Foundation] websiteoffers a list of suggested printers and tutorials.
In my case, I have a Brother HL5250-DN black-and-white laserjet printer connected over a network to Windows XP, OS X and my other Linux systems. It is rated as supporting Linux perfectly, so I decided to use this for my XO laptop.
- Step 2: Install Common UNIX Printing System (CUPS)
Technically, Linux is not UNIX, but for our purposes, close enough. Start the Terminalactivity, use "su" to change to root, and then use "yum" to install CUPS. Yum will automatically determine what other packages are needed, in this case paps and tmpwatch. Once installed, use "/usr/sbin/cupsd" to get the CUPS daemon started, and add this to the end ofrc.local so that it gets started every time you reboot.
Click graphic on the left to see larger view
[olpc@xo-10-CC-6F ~]$ subash-3.2# yum install cups...Total download size = 3.0 MIs this OK [y/N]? y
bash-3.2# /usr/sbin/cupsdbash-3.2# echo "/usr/sbin/cupsd" >> /etc/rc.d/rc.localbash-3.2# exit[olpc@xo-10-CC-6F ~]$
- Step 3: Install Opera or Firefox browser
To download the appropriate drivers, you may need a browser that can handle file downloads. I have triedto do this with the built-in Browse activity (aka Gecko) but encountered problems. I have both Opera and Firefox installed, but I will focus on Opera for this effort.I also installed the older220.127.116.11 version of the Flash player (worked better than the latest 18.104.22.168 version) and Java JRE.Follow the OLPC Wiki instructions for [Opera, Adobe Flash,and Sun Java] installation, thenverify with the following [Java and Flash] testers.
- Step 4: Download drivers and packages unique for your printer
In my case, I used Opera to get to the [Brother Linux Driver Homepage], and downloaded the RPM's for LPR and CUPS wrapper. These are the ones listed under "Drivers for Red Hat, Mandrake (Mandriva), SuSE". I saved these under "/home/olpc" directory.
[olpc@xo-10-CC-6F ~]$ subash-3.2# cd /home/olpcbash-3.2# rpm -vi brhl5250dnlpr-2.0.1-1.i386.rpmbash-3.2# rpm -vi cupswrapperHL5250DN-2.0.1-1.i386.rpmbash-3.2# exit[olpc@xo-10-CC-6F ~]$
- Step 5: Create a "root" password
By default, the root user has no password. However, you will need it to be something for later steps,so here is the process to create a root password. I set mine to "tony" which normallywould be considered too simple a password, but ignore those messages and continue.We will remove it in step 8 (below) to put things back to normal.
[olpc@xo-10-CC-6F ~]$ subash-3.2# passwdChanging password for user root.New UNIX password: tonyBAD PASSWORD: it is too shortRetype new UNIX password: tonypasswd: all authentication tokens updated successfullybash-3.2# exit[olpc@xo-10-CC-6F ~]$
- Step 6: Launch CUPS administration
Here I followed the instructions in Robert Spotswood's [Printing In Linux with CUPS] tutorial.Launch the Opera browser, and enter "http://localhost:631/admin" as the URL. The localhostrefers to the laptop itself, and 631 is the special port that CUPS listens to from browsers. You can alsouse 127.0.0.1 as a shortcut for "localhost", and can be used interchangeably.
In my case, it detected both of my networked printers, so I selected the HL5250DN, entered thelocation of my PPD file "/usr/share/cups/model/HL5250DN.ppd" that was created in Step 4. I set the URI to "lpd://192.168.0.75/binary_p1" per the instructions [Network Setting in CUPS based Linux system] in the Brother FAQ page. I chage the page size from "A4" to "Letter".I set this printer as the default printer. When it asks for userid and password, that is whereyou would enter "root" for the user, and "tony" or whatever you decided to set your root password to.
Select "Print a Test Page" to verify that everything is working.
- Step 7: Printing actual files
Sadly, I don't know Opera well enough to know how to print from there. So, I went over to my trustedFirefox browser. Select File->Page Setup to specify the settings, File->Print Preview tosee what it will look like, and then File->Print to send it to the printer.
To print the file "out.txt" that is in your /home/olpc directory, for example, enter"file:///home/olpc/out.txt" as the URL of the firefox browser. This will show the file,which you can then print to your printer. I had to specify 200% scaling otherwise the fontswere too small to read.
- Step 8: Remove the "root" password
If you want to remove the root password, here are the steps.
[olpc@xo-10-CC-6F ~]$ suPassword: tonybash-3.2# passwd -d rootRemoving password for user root.passwd: Successbash-3.2# exit[olpc@xo-10-CC-6F ~]$
Now the problem is that there is no way to print stuff from any of the Sugar activities. The best place toput in print support would be the Journal
activity. Along the bottom where the mounted USB keys arelocated could be an icon for a printer, and dragging a file down to the printer ojbect could cause it tobe send to the printer.
The alternative is to write some scripts invocable from the Terminal activity to determine what isin the journal, and send them to LPR with the appropriate parameters.
I did not have time to do either of these, but perhaps someone out there can take on that as a project.
technorati tags: OLPC, XO, printing, printer, linux, Opera, Firefox, Java, Flash
As we wrap up the year, people's thoughts turn to archive anddata retention.
The [Robert Frances Group] have put out a research paper titled Optimizing Data Retention and Archiving - November 2007 that helps IT executives understand the cost differences for a disk-only archive approach versus disk/tape archive approach and how an [IBM System Storage DR550] offering can help address the long-term storage archive requirements with a world-class storage strategy that reduces cost, improves efficiency and supports compliance. Here is an excerpt:
Ongoing legal, audit, and regulatory requirementswill continue to drive IT groups to improvearchive policies, processes, strategy, andefficiency. The choice of which technologies touse will have a profound impact on the success ofsuch efforts, since technologies like the DR550embody many aspects of the strategy, processes,and policies that must be decided upon. When itcomes to tape, IBM's DR550 is unique inproviding that support. Competitors tout disk-onlysolutions as the wave of the future, but researchindicates otherwise. The most basic benefits arecost and mobility, and despite the various vendorproclamations to the contrary, tape is still only afraction of the cost of disk and will remain so inthe foreseeable future.
This paper is yet another nail in the coffin of EMC Centera.In his post [Anyone Naughty on Your List…], Jon W Toigo points to an eBay fire sale of an EMC Centera Gen 4.
There has never been a better time to switch from EMC Centera to theIBM System Storage DR550.
technorati tags: Robert Francis Group, IBM, DR550, archive, data retention, storage, solution, disk, tape, drunkendata, Jon Toigo, EMC, Centera
Over at StorageMojo, Robin Harris writes in his post[The High-End Storage Melt-Down
Expect to hear a lot more about the SMB segment over the next 6 months.
Because the high-end market is sucking wind. NetApp and EMC are both reporting problems in the high-end. HP and IBM don’t break out as much detail but I’m sure they are feeling the chill as well.
With Hulk/Maui coming in Q2CY08, you should hold off on any 2nd tier storage purchases you can. I estimate that H/M will be about 30% per GB less than the current gear.
Robin blames the U.S. subprime mortgage mess, butI disagree with the term melt-down.
IBM doesn't publicly report subset numbers on individual product lines, but we are growing, albeit single-digit growth, on the high-end with our IBM System Storage DS8000 and DS6000 series products. Single digit growth is not "booming", but it is what we expected in this space, so it is not like we are"feeling the chill" as Robin stated.Obviously, if the U.S. market overall is doing poorly, then it must be from something else. IBM's success appears to be from organic growth in our Asia and Europe markets, and taking marketshare away from the top two contenders, EMC and HDS. Here are my thoughts why:
- EMC is remodeling its kitchen
Not happy with its status as #1 disk hardware specialty shop, EMC is admirably trying to redefine itself as an ["information infrastructure"] company, buying up software companies and introducing new storage services. [Byte and Switch] reports onEMC's recent acquisitions:
EMC is the latest vendor to pin its colors to the SaaS mast, revealing its plan to offer SaaS-based archiving services during its recent Innovation Day in Boston.IBM has offered[Managed Storage Services] foryears through our Global Technology Services (GTS) division. Gartner recognized IBM as the #1 leader in storageservices, with three times more revenues than EMC in this space.
EMC gave another clear indication of its SaaS intentions last month, when it spent $76 million to acquire online backup specialist Mozy.
As with a restaurant that is remodeling its kitchen, it can expect a temporary drop inrevenue. If it is done right, customers will come back to a bigger brighter restaurant. If not, the restaurant re-opens as a much smaller lesser version of itself. Recent events this year might incent EMC to get that kitchen done quickly:
- A recent [class-action lawsuit]might result in having EMC's "86 percent male" sales force goes to sexual harassment sensitivity training, takingtime away from selling high-end storage arrays in the field. Analysts consider "high-end" boxes as those costingover $300,000 US dollars. Because of the money involved, there is a lot of competition for high-end storage, so face-to-face time with prospective customers is crucial to making the sale.Anytime any vendor is mentioned in a lawsuit (andcertainly IBM has had its share in the past, as Chuck Hollis correctly points out in the comment below), priorities get shifted, and there is potential dip in revenues.
- Dell acquires EMC's rival EqualLogic. Dell resold EMC midrange storage, like CLARiiON, so this should notimpact their high-end storage sales. While Dell will be allowed to sell EMC until 2011, this new acquisition mightmean Dell leads with the EqualLogic offerings, and that could potentially reduce EMC revenues in the midrange space.
IBM went through a similar phase in the 1990's, redefining itself from an "IT Technology" company, intoa "Systems, Software and Services" company. These transitions can't be done in a quarter, or even a year, theytake several years. IBM lost business to EMC in the 1990s, but is back with a stronger portfolio in the 2000's, and so IBM's kitchen remodeling effort appears to be paying off. We will see what happens with EMC in a few years.
- HDS puts on the white lab coats
Meanwhile, HDS appears interested in taking over as #1 disk hardware specialty shop.For years, Hitachi was the stereotypical JCM (Japanese IBM-compatible manufacturer) that made well-engineered"me, too" storage arrays. They would see what innovators like IBM and EMC were doing, and copy them. Recently,however, they seemed to have changed strategy, introducing new featuresand functions on their high-end USP-V device, like[Dynamic Provisioning].
The problem is that customers don't want to feel like [Guinea pigs] in an experimental lab, especially withmission-critical data that they trust to their most-available, most-reliable high-end disk storage systems.Like IBM and EMC and the rest of the major storage vendors, Hitachi has top-notch engineers making quality products, but new features scare people, and so there is a lag in the adoption of new technologies.
In our youth, we might have preferred beer with recent born-on dates, and tequila aged less than 90 days. But as weget older, we switch to drinks like wine and whiskey, aged years, not weeks. The same is true for themarketplace. New start-ups and other "early adopters"might be willing to try fresh new features and functions on their storage systems, but more established enterprises prefer storage with more mature and stable microcode.Storage admins want to leave at the end of the day, knowing that the data will still be there the next morning. In tough financial times, many established companies want the technological equivalent to ["comfort food"], nothing spicy or exotic, but simplehearty fare that fills the belly and keeps you satisfied.
Recognizing this, IBM often introduces new features and functions on its midrange lines first, and position them accordingly. Once customers are comfortable with the concepts, IBM then can consider moving them into the high-end lines. For example, dynamic volume expansion was introduced on the DS4000 and SAN Volume Controller first, and once proven safe and effective, brought over to the DS8000 series. This strategy has served us well.
Well those are my theories. If you have a different explanation of why storage vendors are not doing well in thehigh-end, drop me a comment!
technorati tags: SMB, EMC, NetApp, DS8000, DS6000, HDS, Dell, EqualLogic, subprime, mortgage, USP, USP-V, Dynamic Provisioning, DS4000, SAN Volume Controller, SVC
It's official! My "blook" Inside System Storage - Volume I
is now available.
|This blog-based book, or “blook”, comprises the first twelve months of posts from this Inside System Storage blog,165 posts in all, from September 1, 2006 to August 31, 2007. Foreword by Jennifer Jones. 404 pages.|
- IT storage and storage networking concepts
- IBM strategy, hardware, software and services
- Disk systems, Tape systems, and storage networking
- Storage and infrastructure management software
- Second Life, Facebook, and other Web 2.0 platforms
- IBM’s many alliances, partners and competitors
- How IT storage impacts society and industry
You can choose between hardcover (with dust jacket) or paperback versions:
This is not the first time I've been published. I have authored articles for storage industry magazines, written large sections of IBM publications and manuals, submitted presentations and whitepapers to conference proceedings, and even had a short story published with illustrations by the famous cartoon writer[Ted Rall].
But I can say this is my first blook, and as far as I can tell, the first blook from IBM's many bloggers on DeveloperWorks, and the first blook about the IT storage industry.I got the idea when I saw [Lulu Publishing] run a "blook" contest. The Lulu Blooker Prize is the world's first literary prize devoted to "blooks"--books based on blogs or other websites, including webcomics. The [Lulu Blooker Blog] lists past year winners. Lulu is one of the new innovative "print-on-demand" publishers. Rather than printing hundredsor thousands of books in advance, as other publishers require, Lulu doesn't print them until you order them.
I considered cute titles like A Year of Living Dangerously, orAn Engineer in Marketing La-La land, or Around the World in 165 Posts, but settled on a title that matched closely the name of the blog.
In addition to my blog posts, I provide additional insights and behind-the-scenes commentary. If you go to the Luluwebsite above, you can preview an entire chapter in its entirety before purchase. I have added a hefty 56-page Glossary of Acronyms and Terms (GOAT) with over 900 storage-related terms defined, which also doubles as an index back to the post (or posts) that use or further explain each term.
So who might be interested in this blook?
- Business Partners and Sales Reps looking to give a nice gift to their best clients and colleagues
- Managers looking to reward early-tenure employees and retain the best talent
- IT specialists and technicians wanting a marketing perspective of the storage industry
- Mentors interested in providing motivation and encouragement to their proteges
- Educators looking to provide books for their classroom or library collection
- Authors looking to write a blook themselves, to see how to format and structure a finished product
- Marketing personnel that want to better understand Web 2.0, Second Life and social networking
- Analysts and journalists looking to understand how storage impacts the IT industry, and society overall
- College graduates and others interested in a career as a storage administrator
And yes, according to Lulu, if you order soon, you can have it by December 25.
technorati tags: IBM, blook, Volume I, Jennifer Jones, system, storage, strategy, hardware, software, services, disk, tape, networking, SAN, secondlife, Web2.0, facebook, Lulu, publishing, Blooker Prize, articles, magazines, proceedings, Ted Rall, insights, glossary, early-tenure, mentors, library, classroom, administrator, print, publish, on demand