S550-0435-04
Form definitions for printers other than the 3800, PCL4, and
PPDS printers
Form definitions for printers other than the 3800, PCL4, and
PPDS printers
Many of the form definitions in
the tables in this topic use
Bin 1. By default, 64xx and 65xx printers emulate a 4234 printer,
which only supports bin number 255. Using these form definitions with
a 4234 printer or a 64xx or 65xx printer emulating a 4234 printer
causes an error. Before using these form definitions with a 64xx printer
or a 65xx printer, configure the 64xx printer to emulate a 64xx printer
and configure the 65xx printer to emulate a 6408 printer, not a 4234
printer.
Table 11 describes the form definitions
for printers other than the 3800, PCL4, and PPDS printers, with the
name and a description of each. Note that on some printers printing
near the edge of the paper can result in poor print quality in the
border area. If the printer has a third paper source, you can use
it with some of the form definitions. For the limitations on your
printer, see the publications for your printer. Each of these form
definitions specifies:
- One copy
- No overlays
- No offset stacking or copy marking
Table 11. Form definitions for all printers other than the 3800, PCL4, and PPDS printers
Form Definition Name |
Copy group |
Page Position in Inches |
Duplex |
Paper Source |
F1A10110 |
F2A10110 |
0.165, 0.165 |
Duplex off |
Primary |
F1I30110 |
F2I30110 |
0.165, 0.165 |
Duplex off |
Primary |
F1A10120 |
F2A10120 |
0.165, 0.165 |
Duplex off |
Alternate |
F1A10130 |
F2A10130 |
0.165, 0.165 |
Duplex off |
Third |
F1A10111 |
F2A10111 |
0.165, 0.165 |
Normal duplex |
Primary |
F1I30111 |
F2I30111 |
0.165, 0.165 |
Normal duplex |
Primary |
F1A10121 |
F2A10121 |
0.165, 0.165 |
Normal duplex |
Alternate |
F1A10131 |
F2A10131 |
0.165, 0.165 |
Normal duplex |
Third |
F1A10112 |
F2A10112 |
0.165, 0.165 |
Tumble duplex |
Primary |
F1A10122 |
F2A10122 |
0.165, 0.165 |
Tumble duplex |
Alternate |
F1A10132 |
F2A10132 |
0.165, 0.165 |
Tumble duplex |
Third |
F1A10140 |
F2A10140 |
0.165, 0.165 |
Duplex off |
Fourth |
F1A10141 |
F2A10141 |
0.165, 0.165 |
Normal duplex |
Fourth |
F1A10142 |
F2A10142 |
0.165, 0.165 |
Tumble duplex |
Fourth |
Note:
The 3820 lines up B4-size paper differently from other
paper because of the B4 paper length. To compensate for this, you
can create a form definition with a page position of 0.10, 0.00 inch.
Table 12 lists form definitions that let you print
envelopes or use the manual input bin on the 4028 printer.
Table 12. Form definitions for printing envelopes on the 4028
Form Definition Name |
Copy group |
Page Position in Inches |
Duplex |
Paper Source |
F1A101E0 |
F2A101E0 |
0.165,0.165 |
Duplex off |
Envelope |
F1A000E0 |
F2A000E0 |
0,0 |
Duplex off |
Envelope |
F1A101M0 |
F2A101M0 |
0.165,0.165 |
Duplex off |
Manual |
F1A000M0 |
F2A000M0 |
0,0 |
Duplex off |
Manual |
Table 13 lists form definitions that specify a 0,0
offset. These form definitions are for printing on printers other
than the 3800 printer.
Table 13. Form definitions with a 0,0 offset
Form Definition Name |
Copy group |
Page Position in Inches |
Duplex |
Paper Source |
F1A00010 |
F2A00010 |
0,0 |
Duplex off |
Primary |
F1A00011 |
F2A00011 |
0,0 |
Normal duplex |
Primary |
F1A00012 |
F2A00012 |
0,0 |
Tumble duplex |
Primary |
F1A00020 |
F2A00020 |
0,0 |
Duplex off |
Alternate |
F1A00021 |
F2A00021 |
0,0 |
Normal duplex |
Alternate |
F1A00022 |
F2A00022 |
0,0 |
Tumble duplex |
Alternate |
F1A00030 |
F2A00030 |
0,0 |
Duplex off |
Third |
F1A00031 |
F2A00031 |
0,0 |
Normal duplex |
Third |
F1A00032 |
F2A00032 |
0,0 |
Tumble duplex |
Third |
F1A00040 |
F2A00040 |
0,0 |
Duplex off |
Fourth |
F1A00041 |
F2A00041 |
0,0 |
Normal duplex |
Fourth |
F1A00042 |
F2A00042 |
0,0 |
Tumble duplex |
Fourth |
Table 14 lists form definitions for N_UP 2 printing.
These form definitions define two pages on a side of a sheet. For
more information about using the N_UP subcommand to create N_UP form
definitions, see Page Printer Formatting Aid: User’s Guide.
Table 14. Form definitions for N_UP 2 printing
Form Definition Name |
Copy group |
Page Position in Inches |
Duplex |
Paper Source |
F1N20110 |
F2N20110 |
0.165,0.165 |
Duplex off |
Primary |
F1N20111 |
F2N20111 |
0.165,0.165 |
Normal duplex |
Primary |
F1N20112 |
F2N20112 |
0.165,0.165 |
Tumble duplex |
Primary |
F1N20140 |
F2N20140 |
0.165,0.165 |
Duplex off |
Third |
F1N20141 |
F2N20141 |
0.165,0.165 |
Normal duplex |
Third |
F1N20142 |
F2N20142 |
0.165,0.165 |
Tumble duplex |
Third |
Table 15 lists form definitions to use with three-hole
punched paper when you are printing with page definitions also designed
for use with three-hole punched paper. You can use any of these form
definitions with any of the page definitions for three-hole punched
paper.
Table 15. Form definitions for three-hole punched paper
Form Definition Name |
Copy group |
Page Position in Inches |
Duplex |
Paper Source |
F1H10110 |
F2H10110 |
1.000,0.165 |
Duplex off |
Primary |
F1H10111 |
F2H10111 |
1.000,0.165 0.165,0.165 |
Normal duplex |
Primary |
F1H10112 |
F2H10112 |
1.000,0.165 1.000,0.165 |
Tumble duplex |
Primary |
F1H10120 |
F2H10120 |
1.000,0.165 |
Duplex off |
Alternate |
F1H10121 |
F2H10121 |
1.000,0.165 0.165,0.165 |
Normal duplex |
Alternate |
F1H10122 |
F2H10122 |
1.000,0.165 1.000,0.165 |
Tumble duplex |
Alternate |
F1H10130 |
F2H10130 |
1.000,0.165 |
Duplex off |
Third |
F1H10131 |
F2H10131 |
1.000,0.165 0.165,0.165 |
Normal duplex |
Third |
F1H10132 |
F2H10132 |
1.000,0.165 1.000,0.165 |
Tumble duplex |
Third |
F1H10140 |
F2H10140 |
1.000,0.165 |
Duplex off |
Fourth |
F1H10141 |
F2H10141 |
1.000,0.165 0.165,0.165 |
Normal duplex |
Fourth |
F1H10142 |
F2H10142 |
1.000,0.165 0.000,0.165 |
Tumble duplex |
Fourth |
Table 16 lists form definitions to use when you want
to rotate pages on the paper. These form definitions are for printing
on printers other than the 3800.
Table 16. Form definitions for rotating pages on the paper
Form Definition
Name |
Presentation
Mode |
Print Direction |
Page Position
in Inches |
Duplex |
F1A010LA |
Landscape |
Across |
0,0 |
Duplex off |
F1A010LD |
Landscape |
Down |
0,0 |
Duplex off |
F1A010PA |
Portrait |
Across |
0,0 |
Duplex off |
F1A010PD |
Portrait |
Down |
0,0 |
Duplex off |
F1A011LA |
Landscape |
Across |
0,0 |
Normal duplex |
F1A011LD |
Landscape |
Down |
0,0 |
Normal duplex |
F1A011PA |
Portrait |
Across |
0,0 |
Normal duplex |
F1A011PD |
Portrait |
Down |
0,0 |
Normal duplex |
F1A012LA |
Landscape |
Across |
0,0 |
Tumble duplex |
F1A012LD |
Landscape |
Down |
0,0 |
Tumble duplex |
F1A012PA |
Portrait |
Across |
0,0 |
Tumble duplex |
F1A012PD |
Portrait |
Down |
0,0 |
Tumble duplex |
Table 17 lists form
definitions that can be used to select print quality at a 64xx printer
or a 65xx printer. To facilitate printing edge-to-edge, these form
definitions specify a page position of 0,0. These form definitions
also specify a bin number of 1.
Note:
By default, a 64xx
printer emulates a 4234 printer, which only supports a bin number
of 255. These form definitions specify bin number 1; therefore, using
these form definitions with a 64xx printer emulating a 4234 printer
causes an error. Before using these form definitions with a 64xx printer,
configure the printer to emulate a 64xx printer and not a 4234 printer.
The 65xx printer also defaults to emulate a 4234 printer. Before using
these form definitions with a 65xx printer, configure the 65xx printer
to emulate a 6408 printer and not a 4234 printer.
Table 17. Form definitions used to select print quality on a 64xx or 65xx printer
FORMDEF |
Page position
in inches |
Print Quality |
Duplex |
F1Q10010 |
0.0, 0.0 |
Draft |
Duplex off |
F1Q50010 |
0.0, 0.0 |
DP |
Duplex off |
F1QA0010 |
0.0, 0.0 |
NLQ |
Duplex off |
|