Shutting down Virtual I/O Server logical partitions using the HMC
You can shut down Virtual I/O Server logical partitions using the Hardware Management Console (HMC). You can shut down the Virtual I/O Server immediately or delay the shutdown.
Before you shut down the Virtual I/O Server logical partition,
complete the following tasks:
- If the client logical partitions that use storage and networking virtual resources provided by the Virtual I/O Server are not configured to use virtual resources provided by a redundant Virtual I/O Server, then shut down the client logical partitions.
- Shut down each shared memory partition that accesses
its paging space device using only the Virtual I/O Server logical partition
that you plan to shut down. If you shut down the Virtual I/O Server (VIOS) logical
partition (hereafter referred to as a paging VIOS partition)
before you shut down the shared memory partitions and a shared memory
partition attempts to access memory that is located on its paging
space device, the shared memory partition might fail.
If a shared memory partition accesses its paging space device redundantly through two paging VIOS partitions, you do not need to shut down the shared memory partition. When you shut down the paging VIOS partition, the shared memory partition accesses its paging space device through the other paging VIOS partition.
To shut down a Virtual I/O Server logical partition,
complete the following steps from the HMC: