Creating additional partition profiles
You can create more than one partition profile for a logical partition using the Hardware Management Console (HMC). Each partition profile can specify a different amount of system resources and different logical partition startup attributes. You can change the attributes used by a logical partition by shutting down the logical partition and restarting the logical partition using a different partition profile.
If you plan to create a partition profile in which you configure Active Memory™ Expansion for an AIX® logical partition, ensure that you enter an activation code to enable Active Memory Expansion on the server before you activate the logical partition with this partition profile. For instructions, see Entering the activation code for Active Memory Expansion.
- You plan to create a partition profile that uses all of the system resources.
- You plan to configure Active Memory Expansion for that partition profile.
- Activate the logical partition. When you activate the logical partition, the HMC assigns a pair of worldwide port names (WWPNs) to the virtual fibre channel adapter. For instructions, see Activating a logical partition.
- Restart the Virtual I/O Server (that provides the connection to a physical fibre channel adapter) or run the syscfg command. This enables the Virtual I/O Server to recognize the WWPNs of the virtual fibre channel adapter on the client logical partition For instructions, see Restarting Virtual I/O Server logical partitions using the HMC.
- Assign the virtual fibre channel adapter on the client logical partition to a physical port of a physical fibre channel adapter. For instructions, see Changing virtual Fibre Channel for a Virtual I/O Server using the HMC.