IBM Spectrum Protect Version 8.1.3.000 fix pack readme files

The following readme files are available for the components in this release:

• Readme file - IBM Spectrum Protect server Fix Pack 8.1.3.000
• Readme file - IBM Spectrum Protect device support Fix Pack 8.1.3.000
• Readme file - IBM Spectrum Protect Operations Center Fix Pack 8.1.3.000

---

 

The IBM Spectrum Protect server provides backup, archive, and space management services to clients. You can set up multiple servers in your enterprise network to balance storage, processor, and network resources.

Fix history
To view APARs that were resolved in this fix pack, see technote 291555.

Compatibility with earlier versions
For compatibility with earlier versions, see technote 660949.

System requirements
For server system requirements, see technote 84861.

Obtaining the server installation package
Download this fix pack from Fix Central or Passport Advantage.

The server package on Fix Central does not contain the license. If you are upgrading the server from V8.1.0, V8.1.1, or V8.1.2, the installed license is compatible with this fix pack.

If you are installing the IBM Spectrum Protect server for the first time or are upgrading from V6 or V7, download the IBM Spectrum Protect V8.1.3 server package from Passport Advantage.

For more information about how to download the server package, see the download document for Windows or the download document for AIX and Linux®.

Installing and upgrading

For installation and upgrade instructions, see the procedure for your operating system:

• IBM AIX
• Linux
• Microsoft® Windows

If the IBM Spectrum Protect server and client are installed on the same computer, and you plan to upgrade the server, first upgrade the server to V8.1.3. Then, ensure that clients are at V8.1.2 or later.

Restrictions on upgrading the server from V7 to V8

The following upgrade paths are not possible:

• From V7.1.7.200 and all later V7 levels to V8.1.0
• From V7.1.8 and all later V7 levels to V8.1.0, V8.1.1, or V8.1.2

To upgrade an IBM Spectrum Protect server from V7.1.7.200 or later to V8, upgrade the server directly to V8.1.1 or later.

To upgrade an IBM Spectrum Protect server from V7.1.8 or later to V8, upgrade the server directly to V8.1.3 or later.

Updates, limitations, and known problems

Updates, limitations, and known problems are documented in the form of technotes in the Support knowledge base at the Support Portal. As problems are discovered and resolved, IBM Software Support updates the knowledge base. By searching the knowledge base, you can find workarounds or solutions to problems.

Updates

For a list of new product features and updates, see What's new in IBM Knowledge Center.

Tips for cloud tiering:

• A cloud-container storage pool does not require a local storage directory (cache) if the pool is used only for tiering operations (and not for backup operations).
• All extents that are required to rebuild the cloud object are copied to the tier, if the extents are not already there.
• If data is compressed, encrypted, or both in a directory-container storage pool, the data is moved to the cloud-container storage pool in the same format.

Limitations and known issues

The following table lists limitations and known issues for this fix pack:

Issue	Description
Restrictions apply to cloud storage.	To use an OpenStack storage system on premises or off premises with Swift, you must use OpenStack Swift Release Series Juno, Service Project keystone, application programming interface (API) Version 1 or 2. To use IBM Cloud Object Storage on premises with the Simple Storage Service (S3) protocol, IBM Cloud Object Storage V3.8.3 or later is required. You can configure on-premises or off-premises cloud tiering only on a Microsoft Azure cloud computing system or a cloud computing system with the S3 protocol.
Caching policy for storage systems might cause data corruption.	For storage systems that have aggressive caching policies in which data is confirmed as written before it is committed to permanent storage, data corruption can occur if a power outage or other event prevents the write cache from being committed. The write cache typically has a battery to prevent loss of data from the cache during short power outages. If a power outage occurs and no battery is available, or the battery cache is full, or the length of the power outage exceeds battery capacity, or another event occurs that prevents the write cache from being committed, any data that IBM Spectrum Protect is managing can become corrupted. This data includes the location of data, the size of the volumes to which data was written, and data deduplication information that links data to multiple objects. For more information about requirements for committing cached data to permanent storage, see technote 330991.
Network connection to a NetApp file server becomes unresponsive during a logical interface (LIF) failover.	When IBM Spectrum Protect is configured for network data management protocol (NDMP) operations in a NetApp clustered environment, the network connection to the NetApp file server might become unresponsive during backup operations. You might experience this issue when a LIF failover occurs in the NetApp cluster. IBM Spectrum Protect does not support LIF failovers for NDMP operations.
IBM Tivoli Monitoring for Tivoli Storage Manager is not available in IBM Spectrum Protect V8.1 product releases.	The Tivoli Monitoring for Tivoli Storage Manager component is not delivered in IBM Spectrum Protect V8 product releases. Instead, you can monitor your storage environment by using the Operations Center, a web-based user interface. For instructions, see Installing and upgrading the Operations Center. Tip: In limited lab testing, Tivoli Monitoring for Tivoli Storage Manager V7 was used to monitor an IBM Spectrum Protect V8 server and to generate reports. For instructions about installing and configuring Tivoli Monitoring for Tivoli Storage Manager, see technote 233995.

IBM Software Support might provide additional information about limitations and known issues for this fix pack as technotes at the Support Portal.

---

You can use various storage devices with IBM Spectrum Protect to meet specific data protection goals.

The following information is for devices that are supported by IBM Spectrum Protect server Fix Pack 8.1.3.000.

Fix history

To view APARs that were resolved in Fix Pack 8.1.3.000, see technote 1994495.

Supported devices

For information about the devices and hardware that you can use with IBM Spectrum Protect, see the support website for your operating system:

• IBM AIX and Microsoft Windows
• Linux

New device support

No new devices were added in Fix Pack 8.1.3.000.

Configuring devices

For information about configuring and managing devices, see Configuring storage or the IBM Spectrum Protect Tape Solution Guide.

The following table provides actions that you can take to more efficiently manage your devices and to avoid device configuration issues:

Action	Description
Ensure that HBAs meet requirements.	For best results, connect tape drives and tape libraries to the system on their own host bus adapter (HBA). Do not share the HBA with other device types, such as DISK.
Do not exceed the maximum number of devices that are supported by IBM Spectrum Protect.	For information about the maximum number of devices that you can use with IBM Spectrum Protect device drivers on each operating system, see technote 330991.
Review the support information for Serial Attached SCSI (SAS) device support.	SAS devices can be used with some operating system versions and architectures. For information about operating systems versions and architectures for SAS devices, see technote 394713.
Review requirements for running the IBM Spectrum Protect passthru driver with a non-root user ID on Linux operating systems.	For information about how a non-root user ID can use devices with the IBM Spectrum Protect passthru driver on Linux, see technote 360121. To ensure that non-root user IDs can use devices that are configured with the IBM Spectrum Protect passthru driver, specify option -g or -a in the device autoconf utility. To add read and write permissions for groups to the SCSI generic driver (sg) device files, specify option -g. To add read and write permissions for all users to the sg device files, specify option -a.
Ensure that libraries meet requirements.	IBM Spectrum Protect Extended Edition is required for a library with more than four drives or more than 48 storage slots. For a library with multiple drives, a drive element address is required for the DEFINE DRIVE and UPDATE DRIVE commands. However, if the library reports drive serial numbers, you can specify ELEMENT=AUTODETECT, and the element address is not required. Alternatively, you can automatically associate a library with its drives by issuing the PERFORM LIBACTION command, and specifying ACTION=DEFINE.

---

 

The Operations Center is a web-based interface that you can use to manage your IBM Spectrum Protect environment.

Fix history

To view APARs that were resolved in this fix pack, see technote 291549.

Compatibility with the IBM Spectrum Protect server

For information about Operations Center compatibility with the IBM Spectrum Protect server, see technote 496593.

System requirements

For Operations Center system requirements, see technote 499473.

Obtaining the Operations Center installation package

Download this fix pack from Fix Central.

Installing and upgrading

For installation and upgrade instructions, see Installing and upgrading the Operations Center.

Updates

IBM Software Support might provide update information as technotes at the Support Portal.

Limitations and known issues

For a list of known issues, see technote 296267.

 

---

 

Copyright and trademark information:

http://www.ibm.com/legal/copytrade.shtml

Notices

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

The registered trademark Linux® is used pursuant to a sublicense from the Linux Foundation, the exclusive licensee of Linus Torvalds, owner of the mark on a world­wide basis.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

Third-Party License Terms and Conditions, Notices and Information

The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-English version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version.

Notwithstanding the terms and conditions of any other agreement you may have with IBM or any of its related or affiliated entities (collectively "IBM"), the third party software code identified below are "Excluded Components" and are subject to the following terms and conditions:

• the Excluded Components are provided on an "AS IS" basis
• IBM DISCLAIMS ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS WITH RESPECT TO THE EXCLUDED COMPONENTS, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OR INTERFERENCE AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
• IBM will not be liable to you or indemnify you for any claims related to the Excluded Components
• IBM will not be liable for any direct, indirect, incidental, special, exemplary, punitive or consequential damages with respect to the Excluded Components.