IBM Support

Fix Pack installation instructions for the IBM Business Process Manager V7.5.1 Fix Pack 2 (V7.5.1.2) products

Product Readmes


Abstract

This document provides instructions for installing V7.5.1 Fix Pack 2 (V7.5.1.2) for the IBM Business Process Manager products.

Content


Tab navigation



This fix pack is a cumulative maintenance package for a specific product and applies to all distributed operating systems. It is a single package that bundles a number of individual fixes.

V7.5.1 Fix Pack 2 is intended to be used on IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, and IBM Business Process Manager Advanced - Process Server installations. By installing V7.5.1 Fix Pack 2, you will raise the fix level of your IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server product to V7.5.1 Fix Pack 2.



Table of Contents

© Copyright International Business Machines Corporation 2014. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.


About fix pack and prerequisites



Problems addressed in this fix pack


The fixes addressed in V7.5.1 Fix Pack 2 are explained in the Fix List for Business Process Manager products and WebSphere Enterprise Service Bus document.


Back to top





Fix pack prerequisites

To use this fix pack, you must have one of have the following versions of IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server installed:


  • 7.5.0.0
  • 7.5.0.1
  • 7.5.1.0
  • 7.5.1.1

You must also have the following levels for WebSphere Application Server and its feature packs installed or must install the following levels of WebSphere Application Server and its feature packs during the upgrade process:
  • WebSphere Application Server V7.0.0 Fix Pack 31
  • WebSphere Application Server V7 Feature Pack for XML V1.0.0 Fix Pack 15
  • WebSphere Application Server V7 Feature Pack for Service Component Architecture (SCA) V1.0.1 Fix Pack 17 (IBM Business Process Manager Advanced only)

These downloads are available through the Required fixes for IBM Business Process Management V7.5.1 Fix Pack 2 products document.

If you already have the WebSphere Application Server Version 7.0 Feature Packs installed, you still must have the repositories available and open when you are installing 7.5.1 Fix Pack 2. If you do not have them available, you will receive errors about not being able to synchronize the product installations.

The feature pack repository that is available must be at the same fix level as the feature pack that you have already installed. If you have already installed WebSphere Application Server Feature Pack for SCA Version 1.0.1 Fix Pack 17, for example, that repository must be available during the installation.

Hardware and software prerequisites for IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, and IBM Business Process Manager Advanced - Process Server are available on the web on their respective Hardware and Software Support pages.


Back to top



Space requirement:

Before you start the update, check the free space in your system and temporary directory.
The following table lists the default installation locations. It also lists the approximate additional space that is used after installing the product fix pack and the required WebSphere Application Server fix pack and feature packs.

Product locationWindows operating systemLinux and UNIX-based operating systemsApproximate delta size
Installation Manager Agent Data location
  • C:\Documents and Settings\All Users\Application Data\IBM\Installation Manager
  • C:\ProgramData\IBM\Installation Manager
/var/ibm/InstallationManager10 MB
Installation Manager shared directory
  • <ProgramFiles>\IBM\BPMShared
/usr/IBM/BPMShared 3 GB
IBM Business Process Manager installation
  • C:\IBM\BPM\v7.5
/opt/ibm/BPM/v7.51 GB
Temporary directory
  • C:\Users\User Name\AppData\Local\Temp
/tmp300 MB
Actual space requirement depends on the version that you are upgrading from, and does not include additional temporary space you may need if you are downloading and extracting the fix pack images on local drives.

Back to top



Steps for performing a rolling upgrade



The Process Center and online Process Server cannot connect if the versions do not match. If the Process Server version is later than the Process Center version, you can use the Process Server in the offline mode only. For example, if the Process Server is upgraded to V7.5.1 Fix Pack 2, it can no longer be an online Process Server in Process Center if Process Center is still at V7.5.0 Fix Pack 1. You can deploy new snapshots to the higher-level Process Server using the offline server mode. With this approach, you create a deployment package at the Process Center and install it manually on the Process Server. If the Process Center version is higher than the Process Server version, you will not be able to deploy any applications to the Process Server in offline or in online mode.

You can roll out maintenance incrementally in an IBM Business Process Manager installation that consists of a Process Center and multiple Process Servers. This approach allows for the continued running of production applications during the upgrade and regression test period.

To perform a rolling upgrade, first upgrade the Process Servers and then upgrade the IBM Process Center and tools.

Note: You can complete a rolling upgrade only when you are applying fix packs, refresh packs, or interim fixes. You cannot use a rolling upgrade for migrating between major releases.


Note: In the preceding graphic, PS refers to the Process Server and PC refers to the Process Center.

Assuming that you have a test environment, a staging environment, and an offline production server, complete the following steps:
  1. Upgrade your test environment.
  2. Test your applications in the new environment and make sure that they work as expected.
  3. Upgrade your staging Process Server environment.
  4. Test your applications in the new environment and make sure that they work as expected.
  5. Upgrade your production Process Server.
  6. Upgrade the Process Center. The Process Center maintains a full version history of all the process applications, and there is no opportunity for new function capability to be introduced before the entire topology has been upgraded.
  7. Reconnect any servers that should be online.
  8. Make sure that everything works as expected.

Important: Check for the recommended interim fixes for V7.5.1 Fix Pack 2 in IBM Fix Central.

Back to top



Installing the fix pack



Steps for backing up your existing Installation Manager environment

Back up the Installation Manager directories where the data will be changed during the upgrade process. Refer to Backing up IBM Installation Manager agent data and shared files for recovery.

Back to top








Upgrade instructions for installations with existing profiles

If you have created profiles in the existing Business Process Manager installation, additional steps are required before you start upgrading the fix pack. These steps include backing up the profile, stopping all Java™ processes, and sequencing the upgrade. Before you continue with the fix pack installation, see the Profile upgrade instructions for IBM Business Process Manager V7.5.1 Fix Pack 2 (7.5.1.2) product installations with existing profiles document for details on these steps. Return to this document, when instructed, to complete the Version 7.5.1 Fix Pack 2 installation. Also, if you installed the product using the Typical installation, a profile was created and you must follow these steps.


Back to top






Installing V7.5.1 Fix Pack 2 (7.5.1.2)

If you have existing profiles under this installation, before you continue with the fix pack installation, see the Profile upgrade instructions for IBM Business Process Manager V7.5.1 Fix Pack 2 (7.5.1.2) product installations with existing profiles document for details on the steps to follow for the various topologies. Return to this document, when instructed, to complete the Version 7.5.1 Fix Pack 2 installation.



If you have installed IBM Process Designer 7.5.0.0, 7.5.0 Fix Pack 1, 7.5.1.0, or 7.5.1 Fix Pack 1, you must update your IBM Process Designer environment separately to V7.5.1 Fix Pack 2. For more information, see the Update Instructions for IBM Process Designer V7.5.1 Fix Packs document.

Back to top






Download repositories to the local system

The IBM Installation Manager must be at a minimum level of Version 1.5.2 before you start IBM Business Process Manager 7.5.1 Fix Pack 2 installation updates. The IBM Installation Manager detects an available update if you are connected to the Internet on the workstation on which you are planning to complete the IBM Business Process Manager 7.5.1 Fix Pack 2 update activities. WebSphere Application Server V7.0.0 Fix Pack 11 and later is available in an Installation Manager format. WebSphere Application Server V7.0.0 Fix Pack 31 is a prerequisite to the IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server V7.5.1 Fix Pack 2.

If the machine on which you have installed the product has Internet access, skip the following steps.
  1. If the Installation Manager is lower than Version 1.5.2, download the latest copy of the Installation Manager from the IBM Installation Manager download site.

  2. Download the appropriate V7.5.1 Fix Pack 2 from the IBM Business Process Manager products download site. The product installation packages are described in this dW Answers set. Download the package to a temporary disk location.
    • bpmExp.7512.repository.zip (for IBM Business Process Manager Express)
    • bpmStd.7512.repository.zip (for IBM Business Process Manager Standard)
    • bpmPC.7512.repository.zip (for IBM Business Process Manager Advanced)
    • bpmPS.7512.repository.zip (for IBM Business Process Manager Advanced - Process Server)

  3. If they are not already installed, download the following WebSphere Application Server V7 Fix Pack, Feature Pack repositories, and local copies of the WebSphere Application Server import repositories from the following locations:
    • WebSphere Application Server V7 Feature Pack for XML V1.0.0 Fix Pack 15
    • WebSphere Application Server V7 Feature Pack for Service Component Architecture (SCA) V1.0.1 Fix Pack 17
    • WebSphere Application Server V7 Feature Pack for XML V1.0.0 import repositories
    • WebSphere Application Server V7 Feature Pack for Service Component Architecture (SCA) V1.0.1 import repositories
    • WebSphere Application Server V7.0.0 Fix Pack 31

      All the WebSphere Application Server Fix Pack and Feature Pack Fix Pack files are available for download through the Required fixes for IBM Business Process Management V7.5.1 Fix Pack 2 products document. The live repository includes the latest WebSphere Application Server fix pack.


      WebSphere Application Server V7 Feature Pack for Service Component Architecture (SCA) V1.0.1 Fix Pack 17 or WebSphere Application Server V7 Feature Pack for Service Component Architecture (SCA) V1.0.1 import repositories are required for IBM Business Process Manager Advanced and IBM Business Process Manager Advanced - Process Server only. However, you can optionally install these WebSphere Application Server Feature Packs if you have other IBM Business Process Manager products.

      WebSphere Application Server Fix Pack image for all operating systems and platforms:
      When you decompress the following two files to the same location, they comprise the full V7.0.0 Fix Pack 31 repository that includes all WebSphere Application Server offerings for all supported operating systems and architectures:
      was.7.0.0.31.fp.all_Part1of2.zip
      was.7.0.0.31.fp.all_Part2of2.zip


      WebSphere Application Server Fix Pack images for specific operating systems and platforms:
      The following files contain repository slices that can be used to install WebSphere Application Server Network Deployment Version 7.0.0 Fix Pack 31 for specified operating systems and architectures.


      Note: You do not need to download the previously listed full repository to upgrade your WebSphere Application Server Network Deployment installation on a specific operating system and architecture. You need to download only the single file from the following list that matches your operating system. These platform-specific repositories are smaller in size compared to the image that contains all the platforms.
      was.nd.7.0.0.31.fp.aix.zip
      was.nd.7.0.0.31.fp.win.zip
      was.nd.7.0.0.31.fp.linux.x86.zip
      was.nd.7.0.0.31.fp.linux.s390.zip
      was.nd.7.0.0.31.fp.linux.ppc.zip
      was.nd.7.0.0.31.fp.solaris.sparc.zip
      was.nd.7.0.0.31.fp.solaris.x86.zip
      was.nd.7.0.0.31.fp.hpux.PARISC.zip
      was.nd.7.0.0.31.fp.hpux.ia64.zip

  4. Unpack the repositories to any directories that you choose. Note where you have unpacked the repositories. You should unpack each repository to its own directory.


    You can install the fix packs by using one of the following options:
    Graphical user interface (GUI) of IBM Installation Manager to update an installation
    Command line interface of IBM Installation Manager for a silent installation




Graphical user interface (GUI) of IBM Installation Manager to update an installation

  1. Start the Installation Manager.

    On Windows operating systems with Internet access, you can click Start > Programs > IBM > IBM_Business_Process_Manager_product > Update. Then skip to step 3b.

    If you do not have Internet access or are on a Linux or UNIX-based system, you can start IBM Installation Manager using the install_location/IBMIM command or the install_root\IBMIM.exe command on Windows operating systems. See Installation directories for the product and profile for more information on where Installation Manager is installed.

    Note: On the Windows 7, Windows Vista, or Windows 2008 operating systems, right-click IM_install_root\IBMIM.exe and select Run as administrator.

  2. Add repositories to the IBM Installation Manager preferences.
    1. Click File > Preferences. Under Repositories, select one of the following options:
      - If you have Internet access, ensure that the Search service repositories during installation and updates option is selected.
      - If you do not have an Internet connection, add the location of all the local repositories that you downloaded from the Download repositories to the local system section.
    2. Click Add Repository.

    3. Type or browse to the repository.config file for the IBM Business Process Manager repository that you have unpacked.

    4. Click OK.

    5. Repeat this process for the WebSphere Application Server fix pack and feature pack repositories.

    6. Click OK to save the new repository settings.

  3. To graphically install the fix packs:

    1. Click Update.

    2. Select the Package Group where you have installed IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server and click Next > to continue.

      After Installation Manager checks the service repositories, the Update Packages window opens and the IBM Business Process Manager Express, IBM Business Process Manager Standard, IBM Business Process Manager Advanced, or IBM Business Process Manager Advanced - Process Server Version 7.5.1 Fix Pack 2 is shown (unless there is a later fix pack available from the live update repository).

    3. Ensure that the fix pack and the WebSphere Application Server fix pack and feature pack are selected and then click Next >. The Licenses window opens.

    4. Read and accept the terms of the license agreements by selecting the appropriate button and click Next > to continue. The Features window opens. All of the installed features will be selected.

    5. Click Next > to continue. The Summary window opens. All of the features that need to be updated are shown. The disk space required to perform the update is shown at the bottom.

    6. Click Update to start the update. The updates are downloaded, either from the live update repository or from your local repository. The updates are installed. After the installation of the updates is complete, you receive a confirmation message.



      7. Note:       To graphically install the fix packs during a full installation when you have Internet access, follow the normal installation instructions for a full installation. Go to Install Packages > Check for Other Versions and Extensions. All of the fix packs are discovered. Follow the instructions to select the Show all versions check box, then proceed with the full installation as normal.

      Back to top







Command line interface of IBM Installation Manager for a silent installation


Installation Manager offers a command-line interface to silently update your product installation.
  1. Use the following command to update your IBM Business Process Manager product to V7.5.1 Fix Pack 2:

    <IM_INSTALL_LOCATION>/tools/imcl install <FIX_IDS> -acceptLicense -installationDirectory <INSTALL_DIR> -repositories <FIXPACK_REPOSITORY> -log <LOG_FILE>

    Update the following variables for your installation:
    • <IM_INSTALL_LOCATION>
      This variable is the location where Installation Manager is installed. See Installation directories for the product and profile for more information on Installation Manager default installation directories.

    • <FIX_IDS>
      This variable lists the fixes to install. Fix IDs are separated by spaces. Use the following information to get the correct fix IDs for your product.


      IBM Business Process Manager Express
      com.ibm.websphere.ND.v70_7.0.31.20131206_0632
      com.ibm.websphere.XML.v10_1.0.15.20131205_1246
      com.ibm.ws.WBPMEXP_7.5.1002.20140228_1833


      IBM Business Process Manager Standard
      com.ibm.websphere.ND.v70_7.0.31.20131206_0632
      com.ibm.websphere.XML.v10_1.0.15.20131205_1246
      com.ibm.ws.WBPMSTD_7.5.1002.20140228_1836


      IBM Business Process Manager Advanced
      com.ibm.websphere.ND.v70_7.0.31.20131206_0632
      com.ibm.websphere.XML.v10_1.0.15.20131205_1246
      com.ibm.websphere.SCA.v10_1.0.1017.20131204_1111        
      com.ibm.ws.WPS75_7.5.1002.20140228_1842


      IBM Business Process Manager Advanced - Process Server
      com.ibm.websphere.ND.v70_7.0.31.20131206_0632
      com.ibm.websphere.XML.v10_1.0.15.20131205_1246
      com.ibm.websphere.SCA.v10_1.0.1017.20131204_1111        
      com.ibm.ws.WBPMPS_7.5.1002.20140228_1838


      IBM Business Monitor
      com.ibm.websphere.ND.v70_7.0.31.20131206_0632 
      com.ibm.websphere.XML.v10_1.0.15.20131205_1246
      com.ibm.ws.WBM75_7.5.1002.20140228_1910

    • <INSTALL_DIR>
      This variable is the installation directory of the product.

    • <FIXPACK_REPOSITORY>
      This variable is the location of the fix pack repository.
      Note:       Use commas to separate multiple locations.

    • <LOG_FILE>
      This variable is the location and name of the silent log file to write.


      By including the -acceptLicense parameter, you agree to the terms and licenses of this product.

  2. After updating the command for your environment, run the command from the tools directory under the Installation Manager install location. The following command is an example:


    C:\Program Files (x86)\IBM\Installation Manager\eclipse\tools\imcl install com.ibm.websphere.ND.v70_7.0.31.20131206_0632 com.ibm.websphere.XML.v10_1.0.15.20131205_1246 com.ibm.websphere.SCA.v10_1.0.1017.20131204_1111  com.ibm.ws.WPS75_7.5.1002.20140228_1842 -acceptLicense -installationDirectory C:\IBM\BPM\v7.5 -repositories C:\BPM7512_repository,C:\WAS70031_repository,C:\SCA10117_repository,C:\XML10015_repository -log silent_7512_update.txt

  3. When the silent fix pack installation completes, check the log files to ensure that the installation completed successfully. A success message that is similar to the following text displays on the command line:


    Updated to com.ibm.ws.WPS75_7.5.1002.20140228_1842 in the C:\IBM\BPM\v7.5 directory.




Fix pack install verification


After completing the fix pack upgrade, check the product version information in the Installation Manager and also in the Product_Install/bin directory.

For upgrades of installations with existing profiles, refer to the Identifying profile update errors section under the Profile upgrade tab for details on verifying the fix pack installation.

Note: Installation Manager on the Microsoft Windows operating system does not recognize profile update errors. When you upgrade an installation on a Windows operating system, you must look at the Identifying profile update errors section, even if Installation Manager ends with the following message: The packages are updated.


Back to top




Rolling back the V7.5.1 Fix Pack 2 (V7.5.1.2)



You can "roll back" the fix pack to a previous version by using one of the following options:


Graphical user interface (GUI) of IBM Installation Manager to roll back an installation
Command line interface of IBM Installation Manager for a silent roll back of a fix pack

Note: The following procedure rolls back the product binary only. Any existing profiles that were upgraded during a fix pack installation are not rolled back; you must restore the profiles from the backup you took before you upgraded the product. Any new profiles created after the upgrade cannot be reused; you must delete and re-create the profiles after you have completed the rollback.


Graphical user interface (GUI) of IBM Installation Manager to roll back an installation


  1. Close all programs that were installed using Installation Manager before rolling back.

  2. Start Installation Manager. See Installation directories for the product and profile for more information on where Installation Manager is installed.

  3. From the Start page of the Installation Manager, click Roll back to start the Roll Back Packages wizard.

  4. On the Roll Back Packages page, from the Package Group Name list, select the package group that contains the packages that you want to roll back and click Next.

  5. Select the version of the package to which you want to roll back and click Next.

  6. Read the summary information and click Roll Back to roll back the package.
    When the rollback process completes, a message confirmation displays near the top of the page.

  7. Optional: Click View log file to open the log file for the current session in a new window.

  8. Click Finish to close the wizard.

  9. Close Installation Manager.

  10. Restore the backed-up data from the original version.

Back to top





Command line interface of IBM Installation Manager for a silent rollback of a fix pack



Installation Manager offers a command-line interface to silently roll back your product installation to the previous version. In the instructions, it is assumed that you completed all of the necessary profile, database, and fix pack-specific data backup tasks, which are described in Profile Upgrade instructions, before you migrated to Version 7.5.1 Fix Pack 2. This data is restored after you complete the rollback task.


1. Run the following command, which rolls back your IBM Business Process Manager product to V7.5.0.0, V7.5.0 Fix Pack 1, V7.5.1.0, or V7.5.1 Fix Pack 1:

<IM_INSTALL_LOCATION>/tools/imcl rollback <OFFERING_ID>_<VERSION> -installationDirectory <INSTALL_DIR> -log <LOG_FILE>

Update the following variables for your installation:

<IM_INSTALL_LOCATION>
This variable is the location where Installation Manager is installed. See Installation directories for the product and profile for more information on Installation Manager default install directories.

<OFFERING_ID>
This variable is the offering ID of the product installed.

<VERSION>
This variable is the original version of the product. Rolling back returns your installation to this version.

<INSTALL_DIR>
This variable is the installation directory of the product.

<LOG_FILE>
This variable is the location and name of the silent log to write.


Note: If you are using Installation Manager Version 1.7 and later, you can run the imcl listInstalledPackages command with the -rollbackVersions option to find the list of package versions you can roll back to. For example: ./imcl listInstalledPackages -rollbackVersions


Details for rolling back to V7.5.0.0
Product NameOffering IDVersion
IBM Business Process Manager Expresscom.ibm.ws.WBPMEXP7.5.0.20110518_2017​
IBM Business Process Manager Standardcom.ibm.ws.WBPMSTD7.5.0.20110518_2021​
IBM Business Process Manager Advanced com.ibm.ws.WPS757.5.0.20110518_2042​
IBM Business Process Manager Advanced - Process Servercom.ibm.ws.WBPMPS7.5.0.20110518_2037



Details for rolling back to V7.5.0 Fix Pack 1
Product NameOffering IDVersion
IBM Business Process Manager Expresscom.ibm.ws.WBPMEXP7.5.1.20110729_1911​
IBM Business Process Manager Standardcom.ibm.ws.WBPMSTD7.5.1.20110729_1913​
IBM Business Process Manager Advanced com.ibm.ws.WPS757.5.1.20110729_1917
IBM Business Process Manager Advanced - Process Servercom.ibm.ws.WBPMPS7.5.1.20110729_1915​



Details for rolling back to V7.5.1.0
Product NameOffering IDVersion
IBM Business Process Manager Expresscom.ibm.ws.WBPMEXP7.5.1000.20111111_2238
IBM Business Process Manager Standardcom.ibm.ws.WBPMSTD7.5.1000.20111111_2241
IBM Business Process Manager Advanced com.ibm.ws.WPS757.5.1000.20111111_2248
IBM Business Process Manager Advanced - Process Servercom.ibm.ws.WBPMPS7.5.1000.20111111_2245


Details for rolling back to V7.5.1 Fix Pack 1
Product NameOffering IDVersion
IBM Business Process Manager Expresscom.ibm.ws.WBPMEXP7.5.1001.20120915_1224
IBM Business Process Manager Standardcom.ibm.ws.WBPMSTD7.5.1001.20120915_1227
IBM Business Process Manager Advanced com.ibm.ws.WPS757.5.1001.20120915_1234
IBM Business Process Manager Advanced - Process Servercom.ibm.ws.WBPMPS7.5.1001.20120915_1230


After updating the command for your environment, run the command from the tools directory under the Installation Manager install location. The following command is an example:

C:\Program Files (x86)\IBM\Installation Manager\eclipse\tools\imcl rollback com.ibm.ws.WPS75_7.5.1000.20111111_2248 -installationDirectory C:\IBM\BPM\v7.5 -log silent_rollback.txt


2. Check the log files to ensure that the rollback completed successfully when the rollback process completes,. A success message that is similar to the following text displays on the command line:

Rolled back to com.ibm.ws.WPS75_7.5.1000.20111111_2248 in the C:\IBM\BPM\v7.5 directory.

Note: The previous binary rollback process does not restore the profiles and the database that you might have already upgraded.


3. Restore the backup profile and database as described in the Profile upgrade instructions for IBM Business Process Manager (BPM) V7.5.1 Fix Pack 2 (V7.5.1.2) product installations with existing profiles document.

Back to top


Additional information


Reference

Update Installer (UPDI) is no longer necessary for installing WebSphere Application Server interim fixes for the IBM Business Process Manager products. Refer to the following document for more information.

You can find additional information on any of these topics in the IBM Business Process Manager product documentation.

For further information on the update strategy or obtaining updates, see the following support page for your product:



For additional information about silent installations, see the following information in the product documentation:

Known issues


The list of known issues for Version 7.5.1 and its fix packs are dynamically updated as issues are reported and resolved. You can see the following links to quickly access the applicable information for Version 7.5.1 and its fix packs:



Trademarks and service marks

For trademark attribution, visit the IBM Terms of Use Web site.


Back to top


Original Publication Date

25 September 2012

[{"Product":{"code":"SSFTN5","label":"IBM Business Process Manager Advanced"},"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Component":"Installation \/ Configuration","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"7.5.1.2","Edition":"","Line of Business":{"code":"LOB45","label":"Automation"}},{"Product":{"code":"SSFTDH","label":"IBM Business Process Manager Standard"},"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Component":"Installation \/ Configuration","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF016","label":"Linux"},{"code":"","label":"Linux zSeries"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"7.5.1.2","Edition":"","Line of Business":{"code":"LOB45","label":"Automation"}},{"Product":{"code":"SSFTBX","label":"IBM Business Process Manager Express"},"Business Unit":{"code":"BU053","label":"Cloud & Data Platform"},"Component":"Installation \/ Configuration","Platform":[{"code":"PF016","label":"Linux"},{"code":"PF033","label":"Windows"}],"Version":"7.5.1.2","Edition":"","Line of Business":{"code":"LOB45","label":"Automation"}}]

Product Synonym

BPM

Document Information

Modified date:
17 June 2018

UID

swg27040258

Page Feedback