Product Documentation
Abstract
This page provides details about storage products that are supported with Tivoli Storage Productivity Center version 5.2.0 through 5.2.7.
Content
|
Vendor-acquired Storage for Tivoli Storage Productivity Center
Vendor-acquired Storage for Tivoli Storage Productivity Center for Replication
Important Tip:
|
| Last Updated: 2019-07-22 | ||||
|
Firmware levels listed here are tested and supported. Any issues will be documented as they are identified. This applies to the IBM devices using a native interface only.
Newer firmware levels than what are listed here are considered untested, and an upgrade to Spectrum Control is required to support newer levels as well as new functions.
|
||||
|
Device
|
Firmware
|
Data Source | Interop Namespace |
|
| TPC | TPC for Replication | |||
| IBM FlashSystem V840 | 7.3 (TPC 5.2.3+) | Not Supported | Native Interface | Not Applicable |
| IBM FlashSystem V9000 | 7.5 (TPC 5.2.7+) 7.4 (TPC 5.2.6+) |
7.5 (TPC 5.2.7+) 7.4 (TPC 5.2.6+) |
Native Interface | Not Applicable |
| IBM General Parallel File System (GPFS) IBM System x GPFS Storage Server (GSS) Frequently Asked Questions |
4.1 TL1 (TPC 5.2.3+)14 4.1 (TPC 5.2.3+)14 |
Not Supported | Use a GPFS cluster node running:
|
Not Applicable |
| IBM Spectrum Accelerate | 11.5 (TPC 5.2.7+) | Not Supported | Native Interface |
Not Applicable |
| IBM Spectrum Scale Frequently Asked Questions |
4.1.1 (TPC 5.2.6+) | Not Supported | Use a GPFS cluster node running:
|
Not Applicable |
| IBM System Storage DS8100 DS8300 Note: SSLv3 must be re-enabled in TPC 5.2.5+ to connect. See security bulletin. |
R4.x R3.x R2.4.2 |
R4.x1 - Direct Connect via ethernet cards - minimum 64.0.175.0 HMC Connection - minimum 64.21.14.0 R3.x - minimum 63.1.32.0 R2.x - minimum 6.2.410.30 |
Native Interface5 |
Not Applicable |
| IBM System Storage DS87004 Note: SSLv3 must be re-enabled in TPC 5.2.5+ to connect unless an R6.3 fix has been applied. See security bulletin. |
R6.3 R6.2 R6.1 R5.1.6 (R5.1.5++) R5.1.5 R5.1 R5.0 |
R6.3 R6.2 R6.1 R5.1.6 (R5.1.5++) R5.1.5 R5.1 R5.04 |
Native Interface5 | Not Applicable |
| IBM System Storage DS88004 Note: SSLv3 must be re-enabled in TPC 5.2.5+ to connect unless an R6.3 fix has been applied. See security bulletin. |
R6.3 R6.2 R6.1 R6.0 |
R6.3 R6.2 R6.1 R6.0 |
Native Interface5 | Not Applicable |
| IBM System Storage DS88704 Note: SSLv3 must be re-enabled in TPC 5.2.5+ to connect if R7.0 or R7.1 is used. See security bulletin. |
R7.4 (TPC 5.2.4+) R7.3 (TPC 5.2.3+) R7.2 R7.1 R7.0 |
R7.4 (TPC 5.2.4+) R7.3 (TPC 5.2.2+) R7.2 R7.1 R7.0 |
Native Interface5 | Not Applicable |
| IBM SAN Volume Controller2 |
7.6 (TPC 5.2.6+) 7.5 (TPC 5.2.6+)18 7.4 (TPC 5.2.4.1+)16, 17 7.3 (TPC 5.2.2+)12, 17 7.29, 10 7.1 6.4 6.3 6.2 6.1 5.115 |
7.5 (TPC 5.2.6+) 7.4 (TPC 5.2.4+) 7.3 (TPC 5.2.2+) 7.2 7.1 6.4 6.3 6.2 6.1 5.115 |
Native Interface5 | Not Applicable |
| IBM Storwize V35002 V37002 |
7.6 (TPC 5.2.6+) 7.5 (TPC 5.2.6+)18 7.4 (TPC 5.2.4.1+)16, 17 7.3 (TPC 5.2.2+)12, 13, 17 7.210, 13 7.1 6.4 |
7.5 (TPC 5.2.6+) 7.4 (TPC 5.2.4+) 7.3 (TPC 5.2.2+) 7.2 7.1 6.4.1 |
Native Interface5 | Not Applicable |
| IBM Storwize V50002 | 7.6 (TPC 5.2.6+) 7.5 (TPC 5.2.6+)18 7.4 (TPC 5.2.4.1+)16, 17 7.3 (TPC 5.2.2+)12, 13, 17 7.210, 13 7.1 |
7.5 (TPC 5.2.6+) 7.4 (TPC 5.2.4.1+) 7.3 (TPC 5.2.2+) 7.2 7.1 Note: Storwize V5000 is supported but will be displayed as an SVC. |
Native Interface5 | Not Applicable |
| IBM Storwize V70002 | 7.6 (TPC 5.2.6+) 7.5 (TPC 5.2.6+)18 7.4 (TPC 5.2.4.1+)16, 17 7.3 (TPC 5.2.2+)12, 17 7.29, 10 7.1 6.4 6.3 6.2 6.1 |
7.5 (TPC 5.2.6+) 7.4 (TPC 5.2.4+) 7.3 (TPC 5.2.2+) 7.2 7.1 6.4 6.3 6.2 6.1 |
Native Interface5 | Not Applicable |
| IBM Storwize V7000U | 1.5.1 (TPC 5.2.4.1+) 1.5 1.4 1.3 |
1.5 (TPC 5.2.2+) 1.4 1.3 |
Native Interface5 | Not Applicable |
| IBM Scale Out Network Attached Storage (SONAS) | 1.5.1 (TPC 5.2.1+) 1.4.3 (TPC 5.2.1+) 1.4.2 1.4.1 1.4.0 1.3 |
Not Supported | Native Interface5 | Not Applicable |
| IBM XIV6 2810-A14 2812-A14 |
10.2.419 10.2.2 10.2 10.1 |
10.2.419 | Native Interface5 | Not Applicable |
| IBM XIV Gen3 2810-114 2810-214 2812-114 |
11.5.1 (TPC 5.2.5+) 11.5 (TPC 5.2.4+) 11.4 11.3 11.2 11.1 11.0 |
11.5.1 (TPC 5.2.5+) 11.5 (TPC 5.2.3+) 11.4 11.3 11.2 11.1 11.0 |
Native Interface5 | Not Applicable |
| IBM System Storage DS6000 | Minimum: 6.2.0.104 | Minimum: 6.2.2.64 | Recommended: IBM CIM Agent for DS Open API (Proxy) 5.4.0.107 Also Supported: 5.4.0.98 5.3.0.147 5.3.0.110 5.2.1.139 5.1.0.73 |
/root/ibm |
| IBM System Storage DCS3700 DS3500 DS3512 DS3524 |
Check provider documentation for supported levels. It is strictly required to use the provider only with the supported firmware levels. Other usage may result in impact to the hardware availability. | Not Supported | Recommended: SMI-S Provider for E-Series7 10.27.GG.07 Also Supported: 10.19.GG.21 |
/interop |
| IBM System Storage DS3950 DS4200 DS4700 DS4800 DS5020 DS5100 DS5300 |
Check provider documentation for supported levels. It is strictly required to use the provider only with the supported firmware levels. Other usage may result in impact to the hardware availability. | Not Supported | Recommended: SMI-S Provider for E-Series7 10.27.GG.07 Also Supported: 10.19.GG.21 |
/interop |
| IBM System Storage DS3400 DS4100 DS4300 DS4300 Turbo DS4400 DS4500 FAStT100 FAStT200 FAStT500 FAStT600 FAStT700 FAStT900 |
Check provider documentation for supported levels. It is strictly required to use the provider only with the supported firmware levels. Other usage may result in impact to the hardware availability. | Not Supported | Recommended: Engenio Provider (legacy) 10.50.G0.04 Also Supported: 10.35.G0.00 10.30.G0.05 09.23.G0.00 Note: Windows versions of the provider have '30' rather than 'G0' in the third octet of the version. |
/interop |
| IBM System Storage N3000 Model A N3300 Model A N3700 Model A N5000 Model A N6000 Model A11 (TPC 5.2.2+) N7000 Model A |
For Data function or SMI-S support: Data ONTAP 8.18 (7-Mode) Data ONTAP 8.08 (7-Mode) Data ONTAP 7.2 and above |
Not Supported | Data ONTAP SMI-S Agent3 4.x11 5.x11 |
Check provider documentation |
| For Data function: Data ONTAP 6 |
Not Supported | Not Applicable - Data function as Other NAS support only. | ||
| IBM System Storage N5000 G10/G20 N6000 A10/A20 with Gateway License Feature Code 9551 N7000 G10/G20 |
Data ONTAP V88 Data ONTAP V7 Data ONTAP V6 |
Not Supported | Not Applicable Data function as Other NAS support only. |
Not Applicable |
| IBM TotalStorage ESS 2105-800 |
Recommended: 2.4.4.89 Minimum LIC: 2.4.4.79 |
Minimum LIC: 2.4.4.72 | Recommended: IBM CIM Agent for DS Open API (Proxy) v5.4.0.107 Also Supported: 5.4.0.98 5.3.0.147 5.3.0.110 5.2.1.139 5.1.0.73 |
/root/ibm |
| IBM Storage Notes: | ||||
| 1 In order to run Remote Pair Flashcopy®, Tivoli Storage Productivity Center for Replication requires RPQ 8S1037 and microcode level 64.25.xx. To request this RPQ please contact your IBM Marketing Representative or Authorized IBM Business Partner. 2 Specify a user ID and password of an administrator on the cluster that has sufficient privileges to maintain the SSH keys. 3 With Data ONTAP SMI-S Agent, performance monitoring is supported for volumes and front end ports. It is not supported at the top storage system level. 4 The Open HyperSwap functionality for Tivoli Storage Productivity Center for Replication requires a minimum version of R5.1 with DS8700. It also requires SDDPCM driver 3.0.0, which is available for download. The Open HyperSwap solution for Tivoli Productivity Center for Replication will be deprecated in a future release. 5 Tivoli Storage Productivity Center communicates with DS8000, XIV, SAN Volume Controller, and Storwize family storage systems through their native interfaces rather than with CIM agents. The native interfaces have replaced any prior use of CIM agents as data sources for these storage systems. 6 Support for XIV enhanced performance metrics is available starting with XIV 10.2.4. 7 8 Support for Data ONTAP 8 is limited to volumes with a maximum size of 1 TB. 9 Support for SAN Volume Controller, Storwize V7000 or V7000U R7.2 with the Optimization functionality requires a minimum level of Tivoli Storage Productivity Center 5.2.1. 10 A minimum level of R7.2.0.4 is recommended to avoid errors that may occur during the probe jobs. 11 Support for N-Series N6000 devices requires a minimum version of Data ONTAP SMI-S Agent 5.1. Failures with occur with version 4.1 and it should not be used. 12 The Easy Tier status of "Balanced" reported by SAN Volume Controller and Storwize family devices is displayed as "Active" in Tivoli Storage Productivity Center 5.2.2. For more information view the Limitations and known issues document. 13 Support for Storwize V3500, V3700 and V5000 with the Optimization functionality requires a minimum level of Tivoli Storage Productivity Center 5.2.3. 14 Tivoli Storage Productivity Center 5.2.x does not provide provisioning support for the GPFS and GSS storage devices. 15 Tivoli Storage Productivity Center 5.2.4 and later do not support SAN Volume Controller 5.1. 16 Support for Storwize V3500, V3700 and V5000, V7000 and SAN Volume Controller 7.4 with the Optimization functionality requires a minimum level of Tivoli Storage Productivity Center 5.2.5. 17 Statistics on the lower cache for the SAN Volume Controller and Storwize family devices that are available with 7.3 and later are supported starting with Tivoli Storage Productivity Center 5.2.6. Prior to that, Tivoli Storage Productivity Center will show 0 or close to 0 read cache hits. See APAR IT06100. 18 If using SVC 7.5 prior to Tivoli Storage Productivity Center 5.2.6 (e.g. 5.2.4.1, 5.2.5), SQL errors when processing the pool data may be logged in the traceTPCDeviceServer.log. "java.sql.SQLDataException: DB2 SQL Error: SQLCODE=-420, SQLSTATE=22018, SQLERRMC=INTEGER, DRIVER=3.65.77" 19 Updating the XIV Storage System Gen2 to microcode level 10.2.4.e-8 will disable SSLv3. Tivoli Storage Productivity Center 5.2.5 or higher is required to allow communication via TLS with this device. Note: Starting with Tivoli Storage Productivity Center 5.2, tape storage systems are no longer supported. |
||||
Vendor-Acquired Storage for Tivoli Storage Productivity Center
| Last Updated: 2016-01-21 | |||||
| By Vendor: Dell, EMC, Engenio, Hitachi Data Systems, Hitachi Limited, HP/3PAR, Huawei, NetApp, Silicon Graphics, StorageTek, Sun Notes: Tivoli Storage Productivity Center is SMI-S 1.1.0, 1.0.2 and 1.0.3 certified by SNIA for Disk functionality and supports the functions of providers that have also been certified at these levels. SMI-S standards higher than SMI-S 1.1 are backward compatible. Efforts are made to test many of these provider versions to provide confirmation that the results with Tivoli Storage Productivity Center will be as expected. The function within Tivoli Storage Productivity Center will depend on the SMI-S version, provider version, firmware level on the device and which subprofiles have been certified. The SNIA Conformance Testing Program Web site has details to identify available providers for the vendors listed below, along with details about their SMI-S versions, supported devices, and which profiles have been certified. Data Manager function, such as LUN correlation is also available with these devices. See provider documentation to confirm device and firmware support. Not all provider versions are supported for all devices available from a particular vendor. The SNIA CTP Web site also provides information about devices supported for particular provider versions. All providers will do basic reporting but only some provide performance management information. The non-IBM storage systems listed below are supported with Tivoli Storage Productivity Center as noted. See Vendor-Acquired Storage for Tivoli Storage Productivity Center for Replication for additional support. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning
|
Performance Management
|
|
| Dell | Refer to the SNIA CTP Web site for details. |
Not tested
|
Not tested
|
||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning3
|
Performance Management
|
|
| EMC2 | EMC SMI-S Provider v4.6 and Solutions Enabler v7.6 | VNX device with Unisphere v1.2.26 CLARiiON3 AX Series AX4 Series CX Series CX3 Series CX4 Series |
/interop |
Yes1
|
Yes1
|
| EMC SMI-S Provider v4.5 and Solutions Enabler v7.5 | |||||
| EMC SMI-S Provider v4.4.0 / EMC Solutions Enabler v7.4.0 -read only |
CLARiiON3 AX Series AX4 Series CX Series CX3 Series CX4 Series Symmetrix DMX Series V-Max Series3 |
/interop |
No
|
Yes1
|
|
| EMC SMI-S Provider v4.3.0 and Solutions Enabler v7.3.x | CLARiiON3 AX Series AX4 Series CX Series CX3 Series CX4 Series Symmetrix DMX Series V-Max Series3 |
/interop |
Yes1
|
Yes1
|
|
| EMC SMI-S Provider v4.2.0 and Solutions Enabler v7.2-1108 0.0 | |||||
| EMC SMI-S Provider v4.1.0 and Solutions Enabler v7.1.0 Minimum versions of SMI-S Provider v4.1.0.4 / Solutions Enabler v7.1.0.34 are required. |
|||||
| EMC SMI-S Provider v3.3.2 and Solutions Enabler v6.5.2 EMC SMI-S Provider v3.3.1 and Solutions Enabler v6.5.1 |
CLARiiON AX Series AX4 Series CX Series CX3 Series CX4 Series Symmetrix 8000 Series DMX Series |
/interop |
Yes
|
Yes
|
|
| EMC SMI-S Provider v3.2.3 and Solutions Enabler v6.4.3 | CLARiiON AX Series CX Series CX3 Series Symmetrix 8000 Series DMX Series |
/interop |
Yes
|
Yes
|
|
| EMC SMI-S Provider v3.2.0 and Solutions Enabler v6.4.0 | /interop |
Yes
|
Yes
|
||
| EMC SMI-S Provider v3.1.2 and Solutions Enabler v6.3.2 EMC SMI-S Provider v3.1.1 and Solutions Enabler v6.3.1 |
CLARiiON AX100 AX100i AX150 AX150i CX200 CX200LC CX3-10c CX3-20 CX3-20c CX3-20f CX3-40 CX3-40c CX3-40f CX3-80 CX300 CX300i CX400 CX500 CX500i CX600 CX700 DL300 DL700 FC4500 FC4700 Symmetrix 3630 3830 3930 5630 5830 5930 8230 8430 8530 z8530 8730 8830 z8830 DMX Series DMX-2 Series DMX-3 Series |
/root/Pg_interop |
Yes
|
Yes
|
|
| EMC SMI-S Provider v3.0.1 and Solutions Enabler v6.2.1 EMC SMI-S Provider v3.0 and Solutions Enabler v6.2.0 |
/root/Pg_interop |
Yes
|
No
|
||
| EMC Solutions Enabler v6.0.2 | /root/emc |
Yes
|
No
|
||
| EMC Solutions Enabler v5.5 | /root/emc |
Yes
|
No
|
||
| EMC Storage Notes: 1 Refer to the known performance management and provisioning limitations documented for certain EMC SMI-S Provider 4.x/Solutions Enabler 7.x levels. Minimum versions of SMI-S Provider v4.1.0.4 / Solutions Enabler v7.1.0.34 are required. 2 EMC Navisphere Global Security parameter must be set as disabled to work correctly with the SMI-S Provider. You must install both Solutions Enabler and the SMI-S Provider. EMC MetaLUNs are not supported by Tivoli Storage Productivity Center. 3 Thin provisioning is not supported. Reports of thin provisioned storage have not been tested. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning
|
Performance Management
|
|
| Engenio | Refer to the SNIA CTP Web site for details. |
Not tested
|
Not tested
|
||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning3
|
Performance Management
|
|
| Hitachi Data Systems | Hitachi Device Manager v7.6 -See known limitations. |
AMS 1000 AMS 200 AMS 2100 AMS 2300 AMS 2500 AMS 500 WMS 100 9900V 9970V 9980V 9520V 9530V 9531V 9532V 9533V 9570V 9580V 9585V NSC 55 USP 100 USP 1100 USP 600 VSP |
/interop | Yes2 | Yes |
| Hitachi Device Manager v7.3 -performance management limitations -read only |
AMS 1000 AMS 200 AMS 2100 AMS 2300 AMS 2500 AMS 500 WMS 100 9900V 9970V 9980V 9520V 9530V 9531V 9532V 9533V 9570V 9580V 9585V NSC 55 USP 100 USP 1100 USP 600 |
/root/smis/current /interop |
No
|
Yes
|
|
| Hitachi Device Manager v7.0 -performance management limitations |
9200 9520V 9530V 9531V 9532V 9533V 9570V 9580V 9585V 9970V 9980V AMS 200 AMS 500 AMS 1000 AMS 2100 AMS 2300 AMS 2500 NSC 55 USP 100 USP 600 USP 1100 WMS 100 |
/root/smis/current /interop |
Yes
|
Yes1
|
|
| Hitachi Device Manager v6.3 v6.2 -performance management limitations |
/root/smis/current /interop |
Yes
|
Yes1
|
||
| HiCommand Device Manager v5.8 v5.7 v5.6 v5.5 v5.0 |
/root/smis/current root/hitachi/dm55 |
Yes
|
No
|
||
| HiCommand Device Manager v4.2 v4.0 v3.5 |
root/hitachi/dm42 |
No
|
No
|
||
| Hitachi Data Systems Storage Notes: 1 Refer to the known performance management limitations documented for HDvM 6.x and 7.x SMI-S Provider. 2 To resolve performance problems seen during provisioning tests with Hitachi Device Manager 7.6, use a minimum level of 7.6.1-01 with patch DVM07-61-S01_E01. 3 Except for VSP, thin provisioning is not supported. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning3
|
Performance Management
|
|
| Hitachi Ltd | Hitachi Device Manager v7.6 -See known limitations. |
9530V 9531V 9532V 9533V 9534V 9570V 9580V 9585V 9900V 9970V 9980V AMS 1000 AMS 200 AMS 2100 AMS 2300 AMS 2500 AMS 500 WMS 100 NSC 55 USP 100 USP 1100 USP 600 VSP |
/interop | Yes2 | Yes |
| Hitachi Device Manager v7.3 -performance management limitations -read only |
9530V 9531V 9532V 9533V 9534V 9570V 9580V 9585V 9900V 9970V 9980V AMS 1000 AMS 200 AMS 2100 AMS 2300 AMS 2500 AMS 500 WMS 100 NSC 55 USP 100 USP 1100 USP 600 |
/root/smis/current /interop |
No
|
Yes
|
|
| Hitachi Device Manager v7.0 |
1100 1200 2200 2800 9530V 9531V 9532V 9533V 9534V 9570V 9580V 9585V 9970V 9980V AMS 200 AMS 2100 AMS 2300 AMS 2500 AMS 500 AMS 1000 NSC 55 USP 100 USP 600 USP 1100 WMS 100 |
/root/smis/current /interop |
Yes
|
Yes1
|
|
| Hitachi Device Manager v6.3 v6.2 |
/root/smis/current /interop |
Yes
|
Yes1
|
||
| HiCommand Device Manager v5.8 v5.7 v5.6 v5.5 v5.0 |
root/hitachi/dm55 |
Yes
|
No
|
||
| HiCommand Device Manager v4.2 v4.0 v3.5 |
root/hitachi/dm42 |
Yes
(partial) |
No
|
||
| Hitachi Ltd Storage Notes: 1 Refer to the known performance management limitations documented for HDvM 6.x and 7.x SMI-S Provider. 2 To resolve performance problems seen during provisioning tests with Hitachi Device Manager 7.6, use a minimum level of 7.6.1-01 with patch DVM07-61-S01_E01. 3 Except for VSP, thin provisioning is not supported. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning3
|
Performance Management
|
|
| HP | XP CommandView Advanced Edition v6.2 |
SVS200 XP48 XP128 XP512 XP1024 XP10000 XP12000 |
Check provider documentation. |
Yes1
|
Yes1,2
|
| CommandView XP Advanced Edition v5.8 v5.7 v5.6 v5.5 v5.1 |
Check provider documentation. |
Yes
|
No
|
||
| CommandView EVA v8.0 | EVA 3000 EVA 4000 EVA 5000 EVA 6000 EVA 8000 |
/interop |
Yes
|
No
|
|
| CommandView EVA v6.0.2 | root/pg_interop |
Yes
|
No
|
||
| CommandView EVA v4.1 | root/pg_interop |
No
|
No
|
||
| CommandView EVA v.3.3 | root/EVA |
No
|
No
|
||
| CommandView EVA v.3.1 | root/EVA |
No
|
No
|
||
| CommandView SDM v1.09.01 v1.08 |
VA7100 VA7110 VA7400 VA7410 |
root/va |
No
|
No
|
|
| SMI-S MSA v1.0.2 v1.0.1 |
MSA 1000 MSA 1500 |
root/hpmsa |
No
|
||
| SMI-S MSA v1.00 | root/hpmsa |
No
|
No
|
||
| SMI-S EMA v1.0f.3b | EMA12000 EMA16000 MA8000 |
root/EMA |
No
|
No
|
|
| SMI-S EMA v1.0f.3a | root/EMA |
No
|
No
|
||
| InForm Operating System | 3PAR | /root/pg_interop |
Not tested
|
Not tested
|
|
| HP Storage Notes: 1 Refer to the known performance management limitations documented for HDvM 6.x SMI-S Provider and HP XP CommandView 6.x. 2 Performance management is not supported with the following HP models: XP1024, XP128, XP512, XP48, even with HP XP CommandView 6.2. 3 Thin provisioning is not supported. Reports of thin provisioned storage have not been tested. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning
|
Performance Management
|
|
| Huawei1 | HW SMI-S Provider v1.0.0 | OceanStor S2900 OceanStor S3900 OceanStor S5900 OceanStor S6900 OceanStor S2200T OceanStor S2600T OceanStor S5500T OceanStor S5600T OceanStor S5800T OceanStor S6800T |
root/PG_InterOp | Yes | No |
| HW SMI-S Provider v1.2.1 | OceanStor 18500 OceanStor 18800 OceanStor 18800F |
/interop | Yes | No | |
| HUAWEI SMI-S Provider v1.2.2 | OceanStor 5300 V3 OceanStor 5500 V3 OceanStor 5600 V3 OceanStor 5800 V3 OceanStor 6800 V3 OceanStor 6900 V3 |
/interop | Yes | No | |
| HW SMI-S Provider v1.3.0 | OceanStor S2600T OceanStor S5500T OceanStor S5600T OceanStor S5800T OceanStor S6800T |
/interop | Yes | No | |
| HUAWEI SMI-S Provider v1.5.50 | OceanStor 5300 V3 OceanStor 5500 V3 OceanStor 5600 V3 OceanStor 5800 V3 OceanStor 6800 V3 OceanStor 18500 V3 OceanStor 18800 V3 |
/interop | Yes | Yes* *Requires minimum firmware V300R003. |
|
| Huawei Storage Notes: 1 Support for the listed Huawei storage devices is available starting with Tivoli Storage Productivity Center 5.2.4 or with a fix for APAR IT04852 applied on top of Tivoli Storage Productivity Center 5.2.3. Contact IBM support if you require the fix for Tivoli Storage Productivity Center 5.2.3. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning3
|
Performance Management
|
|
| NetApp | Recommended: Data ONTAP SMI-S Agent 4.x or 5.x with Data ONTAP V8.0 (7-Mode only), V8.1 (7-Mode only), or Data ONTAP V7.2 and above Also Supported (Data function only): Data ONTAP V82 Data ONTAP V7 Data ONTAP V6 |
FAS series V series N series NearStore R200 |
Check provider documentation |
Yes
(block) |
Yes1
(block) |
| NetApp Storage Notes: 1 With Data ONTAP SMI-S Agent, performance monitoring is supported only for volumes and front end ports. It is not supported at the top storage system level. 2 Support for Data ONTAP 8 is limited to volumes with a maximum size of 1 TB. 3 Thin provisioning is not supported. Reports of thin provisioned storage have not been tested. |
|||||
|
Provider
|
Supported Devices | Interop Namespace |
Provisioning
|
Performance Management
|
|
| Silicon Graphics | Refer to the SNIA CTP Web site for details. |
Not tested
|
Not tested
|
||
| StorageTek | Refer to the SNIA CTP Web site for details. |
Not tested
|
Not tested
|
||
| Sun | Refer to the SNIA CTP Web site for details. |
Not tested
|
Not tested
|
||
| 3PAR | See HP. | ||||
Vendor-Acquired Storage for Tivoli Storage Productivity Center for Replication
| Last Updated: 2014-11-10 | |
| The non-IBM storage systems listed below are supported with Tivoli Storage Productivity Center for Replication. See Vendor-Acquired Storage for Tivoli Storage Productivity Center for additional support. | |
|
Vendor
|
Supported Devices |
| Hitachi Data Systems1 | VSP VSP G1000 |
| Hitachi Ltd1 | VSP VSP G1000 |
| Notes: 1 Basic HyperSwap and Metro Mirror Failover/Failback with HyperSwap sessions were developed for Hitachi. Please contact Hitachi directly to confirm support of desired configuration. |
|
[{"Product":{"code":"SS5R93","label":"IBM Spectrum Control"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"--","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF010","label":"HP-UX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"},{"code":"PF035","label":"z\/OS"}],"Version":"5.2;5.2.1;5.2.2;5.2.3;5.2.4;5.2.5;5.2.6;5.2.7","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}},{"Product":{"code":"SSNECY-1","label":"Tivoli Storage Productivity Center Select Edition"},"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Component":null,"Platform":[{"code":"PF002","label":"AIX"},{"code":"PF010","label":"HP-UX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"},{"code":"PF035","label":"z\/OS"}],"Version":"5.2;5.2.1;5.2.2;5.2.3;5.2.4;5.2.5;5.2.6;5.2.7","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}},{"Product":{"code":"SS5R93","label":"IBM Spectrum Control"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":null,"Platform":[{"code":"PF002","label":"AIX"},{"code":"PF010","label":"HP-UX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"},{"code":"PF035","label":"z\/OS"}],"Version":"5.2;5.2.1;5.2.2;5.2.3;5.2.4;5.2.5;5.2.6;5.2.7","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}}]
Was this topic helpful?
Document Information
Modified date:
22 February 2022
UID
swg27039840