Power Estimation Tool for z13 help
Specify the quantity for the features that are installed in your machine. This tool estimates the power consumption and weight for the specified configuration.
Note: The exact power consumption for your machine will vary. The object of the tool is produce an estimation of the power requirements to aid you in planning for your machine installation.
Installed Altitude
Specify the altitude in feet. The amount of power required to cool the box changes above 1500, 3100 and 6000 feet.
Flexible memory
While there is no feature code associated with flexible memory, an “05” message will be included in the Configuration Comments section of the configurator output. If the Flexible Option checkbox is selected then the following message will be generated, “The Flexible Memory Option has been selected for this system.“ Feature code 1996 will be used to specify the additional memory added to the system.
Internal battery
If the internal battery feature is installed the tool will calculate the battery hold time for the specified configuration.
Earthquake feature
The earthquake bolt down kit is specified by features 8018, 8019, and 8020.
I/O drawers
Select the number of drawers that contain cards. Each I/O drawer can support 8 cards. I/O drawers are specified by feature code 4008.
PCIe I/O drawers
Select the number of drawers that contain cards. Each PCIe I/O drawer can support 32 cards. PCIe I/O drawers are specified by feature code 4012.
Customer configured processors
These are the processors ordered with the system and include CPs, ICFs, IFLs, zAAPs, and zIIPs. Include CBU processors only if you are estimating consumption when CBU is active. CBU engine feature code counts must be divided by the CBU years to get the actual number of additional engines. Do not include SAP processors. Base SAPs are automatically included in the calculation by specifying the model.
| Model | Max customer configured processors | Base SAPs | Max optional SAPs |
|---|---|---|---|
| N30 or L30 | 30 | 6 | 4 |
| N63 or L63 | 63 | 12 | 8 |
| N96 or L96 | 96 | 18 | 12 |
| NC9 or LC9 | 129 | 24 | 16 |
| NE1 or LE1 | 141 | 24 | 16 |
Optional SAPs
Enter the number of optional SAPs ordered with the system. This is the total number of SAPs minus the base SAPs defined for the model in the table above.
Memory
Enter the amount of memory ordered for this system not the amount physically installed. Feature codes 2427-2518 define the ordered memory. Set the Flexible memory option to Yes if flexible memory is installed.
Weight
The weight estimate includes the cover set. The frame extensions are included if feature 7942 is installed.