Troubleshooting
Problem
You must use the EISA Configuration Diskette anytime you want to add, move, or remove EISA or ISA adapters. In addition, you might need to use the diskette to resolve configuration conflicts.
Resolving The Problem
Using the EISA Configuration Diskette:
You must use the EISA Configuration Diskette anytime you want to add, move, or remove EISA or ISA adapters. In addition, you might need to use the diskette to resolve configuration conflicts.
Also, if you disable the serial, parallel, infrared, or diskette drive in the Configuration/Setup utility programs, you might need to run the EISA Configuration Diskette, and make the same change. Refer to the README file on the EISA Configuration Diskette for more information.
Each time you use the EISA Configuration Diskette to configure the server, the configuration information is saved in a System
Configuration Information (SCI) file and in the NVRAM configuration. Only devices that are installed and configure correctly appear on the EISA Configuration screens.
Document Location
Worldwide
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1GSMH-3E8EU2