Preventive Service Planning
Abstract
Configuration Information for Tandberg Data DPS1000 Series Virtual Tape Library
Content
Tandberg Data DPS1000 Series Virtual Tape Library
1. Tandberg Data DPS1000 Series is a disk based Virtual Tape Library. The VTL emulates a Tandberg StorageLibrary T40 physical tape library.
2. The following drive emulation are supported.
- HP Ultrium 3-SCSI
3. All models including DPS1100 and DPS1200 are supported.
4. Barcodes are supported.
5. Device identifications and firmware levels used during validation with TSM 6.1.2.
- DPS1100 with software version 1.3.1.0
Library ID : TANDBERG StorageLoader --- Firmware : 0363
Drive ID : HP Ultrium 3-SCSI--- Firmware : G39W
6. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.
7. Tandberg Data DPS1000 VTL is an iSCSI appliance. See Technote 1408958 for the platforms on which Tivoli Storage Manager supports iSCSI devices.
Library and drive may require different minimum Tivoli Storage Manager levels. Therefore, ensure that both library and drive hardware are supported. See "Supported Devices for AIX, HP-UX, Solaris and Windows" or "Supported Devices for Linux" for more support information including minimum supported version levels and supported platforms.
More information regarding device configuration is available in the Tivoli Storage Manager Administrator's Guide, which can be found in Tivoli Storage Manager Information Centers.
[{"Product":{"code":"SSGSG7","label":"Tivoli Storage Manager"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Server","Platform":[{"code":"PF033","label":"Windows"}],"Version":"All Supported Versions","Edition":"","Line of Business":{"code":"LOB26","label":"Storage"}}]
Was this topic helpful?
Document Information
Modified date:
23 June 2018
UID
swg21408959