PACKAGE: Update Release 3.1.4.10
IOSLEVEL: 3.1.4.10
|
VIOS level is |
The AIX level of the NIM Master
level must be equal to or higher than |
|
Update Release 3.1.4.10 |
AIX
7200-05-05 |
Be sure to heed all minimum space requirements before
installing.
Review the list of fixes included in Update Release 3.1.4.10
To take full advantage of all the functions available in
the VIOS, it may be necessary to be at the latest system firmware level. If a
system firmware update is necessary, it is recommended that the firmware be
updated before you update the VIOS to Update Release 3.1.4.10.
Microcode or system firmware
downloads for Power Systems
If the VIOS being updated has filesets
installed from the VIOS Expansion Pack, be sure to update those filesets with the latest VIOS Expansion Pack if updates are
available.
Update Release 3.1.4.10
updates your VIOS partition to ioslevel 3.1.4.10.
To determine if Update Release 3.1.4.10
is already installed, run the following command from the VIOS command line.
$ ioslevel
If Update Release 3.1.4.10
is installed, the command output is 3.1.4.10.
Note: The VIOS installation DVDs and the level of VIOS
preinstalled on new systems might not contain the latest fixes available. It’s
highly recommended that customers that get the physical GA level (i.e., 3.1.4.0)
to update to the electronic GA levels (i.e., 3.1.4.10) as soon as possible.
Missing fixes might be critical to the proper operation of your system. Update
these systems to a current service pack level from Fix Central.
For Customers using NVMe Over Fabric (SAN) as their Boot Disk
Booting from NVMeoF
disk may fail if certain fabric errors are returned, hence a boot disk set up
with multiple paths is recommended. In case there is a failure to boot,
the boot process may continue if you exit from the SMS menu. Another potential
workaround is to discover boot LUNs from the SMS menu and then retry boot.
For Customers Using Third Party Java-based
Software
This only applies to customers who both use third
party Java based software and have run updateios -remove_outdated_filesets to remove Java 7 from their
system.
To prevent errant behavior when editing customer’s /etc/environment
file, updateios does not make changes to that file
when run. If a customer is using software that depends on using Java and having
the path to it in your PATH environment variable, the following edit should be
made to allow programs that use the PATH environment variable to locate Java 8.
In
the /etc/environment file, customers should see:
PATH=[various
directories]:/usr/java7_64/jre/bin:/usr/java7_64/bin
To
address a potential issue with Java-dependent third party
software, this should be converted to:
PATH=[various
directories]:/usr/java8_64/jre/bin:/usr/java8_64/bin
Note
If the Virtual I/O servers are
installed on POWER10
systems and configured with “32Gb PCIe4 2-Port FC Adapter,
Feature Code(s) EN1J and EN1K”, then the requirement is to update the adapter
microcode level to 7710812214105106.070115 before updating the Virtual
I/O server to 3.1.4.10 level.
Please refer to the release notes at this link
VIOS 3.1.4.10 adds the
following new features:
VIOS Shared
Storage Pool Logging Enhancements
The two major enhancements for VIOS Shared Storage
Pool in this release are as follows:
· The
creation of dbn.log file
within a
Shared Storage Pool (SSP).
This file tracks all elections and
relinquishes of the Database Node (DBN) role and debugs DBN-related problems
easily.
· The
compression and storage of vio_daemon logs.
The number of logs
that can be retained is increased by 15 times with no impact to storage
capacity. This is done by compressing old VIOS logs and by tagging them
with appropriate date and time information. This reduces the risk of logs that
might contain critical information from being overwritten by newer logs.
N_Port ID Virtualization (NPIV) Enhancements: NVMeoF Protocol Support
The NPIV is a
standardized method for virtualizing a physical Fibre
Channel (FC) port. An NPIV-capable FC host bus adapter (HBA) can have
multiple N_Ports, each with a unique identity. The
NPIV, coupled with the adapter-sharing capabilities of the Virtual I/O Server
(VIOS), allows a physical Fibre Channel HBA to be
shared across multiple guest operating systems. The PowerVM
implementation of NPIV enables POWER®
logical
partitions (LPARs) to have virtual fibre channel
host bus adapters, each with a dedicated
worldwide port name.
Each virtual Fibre Channel HBA has a unique storage
area network (SAN) identity similar to that of
a dedicated physical HBA.
The Non-Volatile Memory Express over Fabrics (NVMeoF)
protocol in the NPIV stack is supported in Virtual I/O Server Version 3.1.4.0.
A single virtual adapter provides access to both Small Computer Systems
Interface (SCSI) and NVMeoF protocols if the physical
adapter can support them. The application, which is running on the client partition
and capable of handling the NPIV-NVMeoF protocol, can
send I/Os in parallel to SCSI and NVMeoF
disks that are coming from a single virtual adapter. The hardware and software
requirements for NVMeoF protocol enablement in the
NPIV stack are as follows:
· VIOS
Version 3.1.4.0, or later
· NPIV-NVMeoF capable client (currently AIX® Version
7.3 Technology Level 01, or later)
· POWER
10 system with firmware version FW 1030, or later
· 32
or 64 GB FC adapters with physical NVMeoF support
VIOS
Operating System Monitoring Enhancement
This release adds support for monitoring the VIOS
operating system state by the POWER Hypervisor. If the VIOS
partition is not responsive (due to certain conditions), then the hypervisor
restarts the VIOS partition while it takes the system dump for debugging
purpose. This helps to recover the VIOS partition from errors, for example, if
the CPU is hijacked by the highest-level interrupt, the system progress is
stopped. The ioscli viososmon command
is added to understand the hang detection interval and the action when
the hang is detected. This support requires POWER firmware
version FW
1030, or later and VIOS Version 3.1.4.0, or later.
Support for NFSv4 Mounts on VIOS
The ioscli
mount command
which previously, by default, only supported the NFSv3 mount of the AIX is
updated to support NFSv4 mounting. The changes allow VIOS to be able to invoke
commands for the following actions:
·
Setting Network File System (NFS) domain using chnfsdom from command line
interface (CLI)
The setting of the
NFS domain is accomplished by adding a Role-based access control (RBAC) support
for the chnfsdom command.
· Invoking
the NFSv4 mounting
The ioscli mount
command is
updated to support invoking the NFSv4 mounting. The current ioscli
mount command defaults to NFSv3. You can invoke the “o vers=4” option with the new “-nfsvers
<version> <Node: > <Directory> <
Directory>” option that is added
to the ioscli mount
command. The
values that are supported for the version are 3 and 4.
Note: The ioscli mount command
supports NFS versions that are supported by the AIX
mount
command.
· Starting
the nfsrgyd daemon
For version 4, if
the mount is successful, a check is done to see if the nfsrgyd
daemon is already started. And if it has not yet started, the nfsrgyd daemon is started.
VIOS 3.1.4.10 can run on any of the following Power
Systems:
POWER 8 or later.
The following requirements and limitations apply to Shared Storage Pool
(SSP) features and any associated virtual storage enhancements.
Software Installation
SSP Configuration
|
Feature |
Min |
Max |
|
Number of
VIOS Nodes in Cluster |
1 |
16* |
|
Number of
Physical Disks in Pool |
1 |
1024 |
|
Number of
Virtual Disks (LUs) Mappings in Pool |
1 |
8192 |
|
Number of
Client LPARs per VIOS node |
1 |
250* |
|
Capacity
of Physical Disks in Pool |
10GB |
16TB |
|
Storage Capacity
of Storage Pool |
10GB |
512TB |
|
Capacity
of a Virtual Disk (LU) in Pool |
1GB |
4TB |
|
Number of
Repository Disks |
1 |
1 |
|
Capacity
of Repository Disk |
512MB |
1016GB |
|
Number of
Client LPARs per Cluster |
1 |
2000 |
Prerequisites for expanded support:
Here are the new maximum values for each of these
configuration options, if the associated hardware specification has been met:
|
Feature |
Default
Max |
High
Spec Max |
|
Number of
VIOS Nodes in Cluster |
16 |
24 |
|
Number of
Client LPARs per VIOS node |
250 |
400 |
Network Configuration
Storage Configuration
Shared Storage Pool capabilities and limitations
Please ensure that your rootvg
contains at least 30 GB and that there is at least 4GB free space before you attempt to update to
Update Release 3.1.4.10. Run the lsvg rootvg command, and then ensure there is
enough free space.
Example:
$ lsvg rootvg |
|
|
|
VOLUME GROUP: |
rootvg |
VG IDENTIFIER: |
00f6004600004c000000014306a3db3d |
VG STATE: |
active |
PP SIZE: |
64 megabyte(s) |
VG PERMISSION: |
read/write |
TOTAL PPs: |
511 (32704 megabytes) |
MAX LVs: |
256 |
FREE PPs: |
64 (4096 megabytes) |
LVs: |
14 |
USED PPs: |
447 (28608 megabytes) |
OPEN LVs: |
12 |
QUORUM: |
2 (Enabled) |
TOTAL PVs: |
1 |
VG DESCRIPTORS: |
2 |
STALE PVs: |
0 |
STALE PPs: |
0 |
ACTIVE PVs: |
1 |
AUTO ON: |
yes |
MAX PPs per VG: |
32512 |
|
|
MAX PPs per PV: |
1016 |
MAX PVs: |
32 |
LTG size (Dynamic): |
256 kilobyte(s) |
AUTO SYNC: |
no |
HOT SPARE: |
no |
BB POLICY: |
relocatable |
PV RESTRICTION: |
none |
INFINITE RETRY: |
no |
A single, merged lpp_source is not supported for VIOS that uses SDDPCM.
However, if you use SDDPCM, you can still enable a single boot update by using
the alternate method described at the following location:
SDD and SDDPCM migration
procedures when migrating VIOS from version 1.x to version 2.x
Virtual I/O Server support for Power Systems
VIOS Update
Release 3.1.4.10 may be applied directly to any VIOS at level 3.1.0.00.
The VIOS must
first be upgraded to 3.1.0.00 before the 3.1.4.10 update can be applied. To learn more about how to do that, please
read the information provided here.
Warning: The
update may fail if there is a loaded media repository.
To check for a
loaded media repository, and then unload it, follow these steps.
1. To check for loaded images, run the following command:
$ lsvopt
The Media column lists any loaded media.
2. To unload media images, run the following commands on all Virtual Target
Devices that have loaded images.
$ unloadopt -vtd <file-backed_virtual_optical_device >
3. To verify that all media are unloaded, run the following command again.
$ lsvopt
The command output should show No
Media for all VTDs.
The Virtual I/O
Server (VIOS) Version 2.2.2.1 or later, supports rolling updates for SSP
clusters. The VIOS can be updated to Update Release 3.1.4.10 using rolling
updates.
Non-disruptive
rolling updated to VIOS 3.1 requires all SSP nodes to be at VIOS 2.2.6.31 or
later. See detailed instructions in the VIOS 3.1 documentation
The rolling
updates enhancement allows the user to apply Update Release 3.1.4.10 to the VIOS
logical partitions in the cluster individually without causing an outage in the
entire cluster. The updated VIOS logical partitions cannot use the new SSP
capabilities until all VIOS logical partitions in the cluster are updated.
To upgrade the
VIOS logical partitions to use the new SSP capabilities, ensure that the
following conditions are met:
·
All VIOS logical partitions must have
VIOS Update Release version 2.2.6.31 or later installed.
·
All VIOS logical partitions must be
running. If any VIOS logical partition in the cluster is not running, the
cluster cannot be upgraded to use the new SSP capabilities.
Instructions: Verify
the cluster is running at the same level as your node.
1. Run the following command:
$ cluster -status -verbose
2. Check the Node Upgrade Status field, and you should see one of the
following terms:
UP_LEVEL: This means that the software level of the logical partition is higher
than the software level the cluster is running at.
ON_LEVEL: This means the software level of the logical partition and the
cluster are the same.
There is now a method
to verify the VIOS update files before installation. This process requires
access to openssl by the 'padmin'
User, which can be accomplished by creating a link.
Instructions: Verifying VIOS update files.
To verify the VIOS
update files, follow these steps:
1. $ oem_setup_env
2. Create a link to openssl
# ln
-s /usr/bin/openssl /usr/ios/utils/openssl
3.
Verify the link to openssl
was created
# ls
-alL /usr/bin/openssl /usr/ios/utils/openssl
4.
Verify that both files display similar
owner and size
5. # exit
Use one of the
following methods to install the latest VIOS Service Release. As with all
maintenance, you should create a VIOS backup before making changes.
If you are running
a Shared Storage Pool configuration, you must follow the steps in Migrate Shared Storage Pool Configuration.
Note:
While running 'updateios' in the following steps, you
may see accessauth messages, but these messages can safely be
ignored.
Version Specific Warning: Version 2.2.2.1, 2.2.2.2, 2.2.2.3, or 2.2.3.1
You must run updateios command twice to get bos.alt_disk_install.boot_images fileset
update problem fixed.
Run the following
command after the step of "$ updateios –accept
–install –dev <directory_name >" completes.
$ updateios –accept –dev <directory_name >
Depending on the
VIOS level, one or more of the LPPs below may be reported as "Missing
Requisites", and they may be ignored.
MISSING
REQUISITES:
X11.loc.fr_FR.base.lib 4.3.0.0 # Base Level Fileset bos.INed 6.1.6.0 # Base Level Fileset bos.loc.pc.Ja_JP 6.1.0.0 # Base Level Fileset bos.loc.utf.EN_US 6.1.0.0 # Base Level Fileset bos.mls.rte 6.1.x.x # Base Level Fileset
Warning: If VIOS rules
have been deployed.
During update, there have been occasional issues with VIOS Rules files getting
overwritten and/or system settings getting reset to their default values.
To ensure that this doesn’t affect you, we
recommend making a backup of the current rules file. This file is located here:
/home/padmin/rules/vios_current_rules.xml
First, to capture your current system settings, run this command:
$ rules
-o capture
Then, either copy the file to a backup
location, or save off a list of your current rules:
$ rules -o list > rules_list.txt
After this is complete, proceed to update
as normal. When your update is complete,
check your current rules and ensure that they still match what is desired. If not, either overwrite the original rules
file with your backup, or proceed to use the ‘rules -o modify’ and/or ‘rules -o
add’ commands to change the rules to match what is in your backup file.
Finally, if you’ve failed to back up your
rules, and are not sure what the rules should be, you can deploy the
recommended VIOS rules by using the following command:
$ rules -o deploy -d
Then, if you wish to copy these new VIOS
recommended rules to your current rules file, just run:
$ rules -o capture
Note: This will
overwrite any customized rules in the current rules file.
Applying Updates
Warning:
If the target node
to be updated is part of a redundant VIOS pair, the VIOS partner node must be
fully operational before beginning to update the target node.
Note:
For VIOS nodes that
are part of an SSP cluster, the partner node must be shown in 'cluster -status ' output as having a cluster status of
OK and a pool status of OK. If the target node is updated before its VIOS
partner is fully operational, client LPARs may crash.
Instructions: Applying updates to a VIOS.
2. Using ftp, transfer the update file(s) to the directory you created.
To apply updates from a remotely mounted file system, and the remote file
system is to be mounted read-only, follow the steps:
The update release
can be burned onto a CD by using the ISO image file(s). To apply updates from
the CD/DVD drive, follow the steps:
$ shutdown
-restart
Note: If shutdown –restart command failed, run swrole –PAdmin for padmin to set authorization and establish access to the shutdown command properly.
$ clstartstop -start -n <cluster_name > -m <hostname >
$ ioslevel
Instructions: Checking for an incomplete installation caused by a loaded media
repository.
After installing
an Update Release, you can use this method to determine if you have encountered
the problem of a loaded media library.
Check the Media
Repository by running this command:
$ lsrep
If the command
reports: "Unable to retrieve repository data due to incomplete repository
structure," then you have likely encountered this problem during the
installation. The media images have not been lost and are still present in the
file system of the virtual media library.
Running the lsvopt command should show the media images.
Instructions: Recovering from an incomplete installation
caused by a loaded media repository.
To recover from this
type of installation failure, unload any media repository images, and then
reinstall the ios.cli.rte package. Follow these steps:
1. Unload any media images
$ unloadopt -vtd <file-backed_virtual_optical_device>
2. Reinstall the ios.cli.rte fileset by running the following commands.
To escape the
restricted shell:
$ oem_setup_env
To install the failed fileset:
# installp –Or –agX ios.cli.rte –d <device/directory >
To return to the restricted
shell:
# exit
3. Restart the VIOS.
$ shutdown
–restart
4. Verify that the Media Repository is operational by running this command:
$ lsrep
|
APAR |
Description |
|
IJ22238 |
Install images for bos.dsc |
|
IJ34885 |
LIBCLUSTER.A __CLUSTER_INIT IS LEAKING ON DLOPEN/DLCLOSE |
|
IJ35323 |
DOMAIN RSCN MAY CAUSE IO PATH FAILURE WHICH NEVER RECOVERS |
|
IJ35324 |
clearaca cmd failure, due to link down, could cause hang. |
|
IJ35325 |
Enabling SANCOM failing after LPM |
|
IJ35326 |
IO failure on client after DBN node reboot |
|
IJ35327 |
Improve logging during violib DB
function load |
|
IJ35328 |
Avoid error logging, for FCNVMe LS_RJT
for lower error checks |
|
IJ35329 |
Writing iso image to unformatted USB DVD media might hang |
|
IJ35331 |
Need clear err msg when changing EC
teaming mode to other mode |
|
IJ35332 |
CMDB MAY FAIL WITH AMS IF PAGING DEVICES ARE LV |
|
IJ35333 |
cryptstat can not load translation message for cmd
usage |
|
IJ35334 |
support max value of 300 sec for rw_timeout
attribute |
|
IJ35335 |
Add an error message for unsupported disks |
|
IJ35336 |
Crash when set dpages_regular to
0x20000 on RoCE adapters |
|
IJ35337 |
AIX vNIC client receive hang condition |
|
IJ35338 |
add ERRID_ACL_VIOLATION error ID to lnc2entdd device driver |
|
IJ35340 |
EXCESSIVE "VIO_INFO: HM LOST ACCESS TO DATA BASE" IN
ERRLOG |
|
IJ35341 |
PCIe adapters fail to configure with FW1030 |
|
IJ35343 |
Crash in processFcpError on disk open |
|
IJ35346 |
LDAP AFFECTS VIOS PKG UPDATE SCRIPT CREATE VIOS AUTHORIZATION |
|
IJ35347 |
SNMP HOSTMIBD REPORTING WRONG CPU INFO |
|
IJ35348 |
IKEV2D GETS STUCK IN AN INFINITE LOOP WHEN A EMPTY UDP PACKET IS |
|
IJ35349 |
AIX 72 INETD 0513-008 THE SUBSERVER TYPE, IS NOT ON FILE. |
|
IJ35350 |
pkcs11 kernext crash with a bad memory
pointer |
|
IJ35351 |
A SECURITY PROBLEM EXISTS WITH LOG FILES |
|
IJ35352 |
smitty malng remove language error |
|
IJ35353 |
VMRM RECEIVES ADAPTER DOWN / UP FROM CAA |
|
IJ35354 |
FAILURE TO INSTALL ADDITIONAL RPMS DURING NIM MKSYSB INSTALL |
|
IJ35355 |
UPDATEIOS -REMOVE_OUTDATED_FILESETS FLAG NOT DOCUMENTED |
|
IJ35356 |
IPSEC TUNNEL CONFIGURATION REJECTS SINGLE CERTIFICATE |
|
IJ35357 |
REMOVE_OUTDATED_FILESET OPTION IN UPDATEIOS REMOVES PART COMMAND |
|
IJ35358 |
CDP daemon output discrepancy |
|
IJ35359 |
ARP -A CONSUMES HUGE MEMORY |
|
IJ35361 |
EXPORTFS ERRORS MAY OCCUR WHEN ALLOCATING NIM RESOURCES |
|
IJ35367 |
Array print only prints the first member |
|
IJ35368 |
for P10 lparstat now show Mode |
|
IJ35369 |
Extraneous pthread_mutex_unlock call
in clcomd |
|
IJ35370 |
amepat P10
CPU frequency |
|
IJ35371 |
_pks_state is missing from syscalls.imp after update install |
|
IJ35379 |
GETGRGID DOESN'T WORK WITH DOMAINLESS GROUPS - AFFECTS SUDO |
|
IJ35380 |
DOMAINLESSGROUPS DOESN'T WORK WITH NETGROUP |
|
IJ35381 |
APPLICATIONS USING PTHREADS CAN FAIL WITH EPERM OR EDEADLK ERROR |
|
IJ35383 |
Pthread sigsuspend returns an unsupported errno
after LKU |
|
IJ35384 |
segmentation fault occurs on hdcryptmgr
pksshow |
|
IJ35386 |
TRUSTCHK POLICY CHANGES ARE NOT LOGGED TO SYSLOG |
|
IJ35387 |
pollset_poll
missing events when tracking multiple with POLLET |
|
IJ35388 |
LPAR crashed@lock_free_com+0x058 on DEBUG AIX kernel |
|
IJ35389 |
System crash during LPM or DPO after starting WLM |
|
IJ35390 |
Crash in setnewrq during DLPAR CPU
removal thread migration |
|
IJ35391 |
BACKUP FROM A MOUNTED JFS2 SNAPSHOT MAY CRASH SYSTEM |
|
IJ35392 |
Encrypted logical volumes unable to mount |
|
IJ35393 |
Crash during restvg operation |
|
IJ35394 |
Problem with internal kernel debug code |
|
IJ35395 |
2IX SCHEDO DEFAULTS WHEN VPM THROUGHPUT MODE DEFAULT IS SET TO |
|
IJ35396 |
crash in shmctl() |
|
IJ35397 |
LPAR hung during LPM due to kernel deadlock |
|
IJ35398 |
Opening a quota file and then force unmount causes a crash |
|
IJ35399 |
EEXIST logged after LPM |
|
IJ35400 |
Using LDR_PRELOAD or LDR_PRELOAD64 leads to out-of-memory error |
|
IJ35402 |
nextroute()
needs to take cached routes in account |
|
IJ35404 |
DU COMMAND MAY LOOP ENDLESSLY |
|
IJ35405 |
SYNTAX ERRORS WHEN SCRIPT CALLS MULTIPLE HEREDOCS |
|
IJ35406 |
LSPV MAY SHOW A DEVICE LOCKED TWICE |
|
IJ35407 |
PAX FAILS TO RESTORE MODIFICATION TIMES |
|
IJ35408 |
JFS2 ROLLBACK FOR A LARGE FILESYSTEM MAY NOT COMPLETE CORRECTLY |
|
IJ35409 |
cleanup issue |
|
IJ35410 |
joinvg -f
system crash during space reclaim of split PV's |
|
IJ35411 |
DSI when deleting a PV when space reclaim is in progress |
|
IJ35412 |
NIM Maintenance boot lvmstat error
messages |
|
IJ35413 |
NIM maintenance boot sees logredo64 error while mounting rootvg |
|
IJ35415 |
Support for Open XL |
|
IJ35416 |
expr fails to consider input as string in few cases |
|
IJ35418 |
fail to collect adapter dump when device is not in use |
|
IJ35419 |
broken declaration of getpeereid in socket.h |
|
IJ35627 |
VPM_THROUGHPUT_MODE VALUE CHANGES TO DEFAULT AFTER LPM |
|
IJ35628 |
Crash during removal of active device |
|
IJ35631 |
Update to kdb disassembly of dcbt/dcbtst instructions |
|
IJ35632 |
system might hung during NPIV client
adapter reset |
|
IJ35633 |
7.2 TL5 logs Temp transport faults during LPM |
|
IJ35634 |
I/O MAY HANG DURING LPM WITH 7.2 TL5 SP2 |
|
IJ35635 |
IEEE802.3AD ETHERCHANNEL FAILBACK RIGHT AFTER FAILOVER |
|
IJ35637 |
AIX lpar crashes for stale cmd after adatper reset
sequence. |
|
IJ35638 |
System hangs after LPM. |
|
IJ35639 |
NPIV Client crashes after lpm in loop due to stale kthread addr |
|
IJ35640 |
VIOS snap does not collect vnicstat
output on a vNIC server |
|
IJ35641 |
system crash while performing heavy IO using vdbench. |
|
IJ35642 |
VIOS may crash while using NPIV |
|
IJ35643 |
Disk ping driver NDD_JOIN fails with ENOMEM |
|
IJ35644 |
Make error check less aggressive when using delayed_fail |
|
IJ35645 |
SEA IS NOT REGISTERING ITS LINK STATUS CALL BACK FUNCTION |
|
IJ35646 |
alt_disk cmds can not load translation
messages for usage |
|
IJ35648 |
libld.a does
not handle large files in 32-bit programs |
|
IJ35649 |
ICON Editor not save state into session |
|
IJ35650 |
pool check reports bmap summary error
incorrectly |
|
IJ35651 |
Need to create caa_slave.stdio at
install time |
|
IJ35653 |
as command: add extended mnemonics for dcbt
and dcbtst |
|
IJ35656 |
Support for damaged tier clean-up when bad block map |
|
IJ35657 |
A potential security issue exists |
|
IJ35660 |
EXTENDVG MAY GIVE MISLEADING ERROR MESSAGE REGARDING MAX PPS |
|
IJ35661 |
lvmstat core
dump when reporting space reclaim statistics |
|
IJ35662 |
A potential security issue exists |
|
IJ35677 |
VIOS Hard Failures error message returned to KSYS. |
|
IJ35678 |
AddMS failed
hsmon not up. |
|
IJ35736 |
vio_daemon dump@caa_aha_monitor |
|
IJ35737 |
Better error when required redundancy paths are not met |
|
IJ35738 |
Fix deadlock issue in VMRM HA solution. |
|
IJ35739 |
VMRM Host Monitor inoperative after add
VIOS |
|
IJ35740 |
Possible crash with tier remove when
using SSP disk caching |
|
IJ35807 |
LDAP NEGATIVE CACHE WON'T WORK IF THERE'S AN INVALID DN |
|
IJ35884 |
A potential security issue exists |
|
IJ35885 |
Crash with disabling storage pool disk worker threads |
|
IJ35923 |
VIOSBR RUN WITH FREQUENCY REMOVES AUTOVIOSBR FROM CRON |
|
IJ35925 |
dbx prints
long-long types incorrectly |
|
IJ35927 |
Configuring IP on Etherchannel madeup of vEths, may fail. |
|
IJ35957 |
Sending mail may fail after migration in some cases |
|
IJ35961 |
Failed rootvg paths may not
automatically recover |
|
IJ35962 |
ERROR IN DIIAGREAD CAUSES CRASH IN IKILL |
|
IJ36026 |
Text Editor disappeared in ja_JP.IBM-eucJP |
|
IJ36027 |
Ethernet transmit timeouts followed by port DEAD state |
|
IJ36028 |
Firmware update returns zero for the FW version and logs error |
|
IJ36029 |
Kernel extension binary compatibility break in sys/proc.h |
|
IJ36099 |
ASO CORE DUMPS IN LGPG_PSTATUS_HOTSEGS() |
|
IJ36105 |
LPM failure with disk driver timing out IO's |
|
IJ36237 |
JFS2 FILE SYSTEM CAN GET
MARKED CORRUPT AFTER EXTENDING FS. |
|
IJ36300 |
NPIV PATH MISSING AFTER VIOSUPGRADE FROM 2.2.6.X TO 3.1.X.X |
|
IJ36301 |
UNRECOVERABLE EN0W FC ADAPTER AFTER FIRMWARE UPDATE. |
|
IJ36302 |
fcstat -z may
not zero High water "Adapter Driver Queue Stats" |
|
IJ36305 |
DR verify fails for DS8K |
|
IJ36306 |
Common Criteria emgr_sec_patch
validation |
|
IJ36365 |
USB Diagnostics download microcode source fails |
|
IJ36366 |
Pool capacity is less than disk capacity after replace disk. |
|
IJ36372 |
IN RARE CASES JFS2 AIO_RETURN() HAS A STALE VALUE |
|
IJ36374 |
Improve Live Partition Mobility RAS |
|
IJ36402 |
NETMON SHOULD RUN WHEN ONLY A SINGLE NODE IS UP |
|
IJ36407 |
od -N fails for large integer values |
|
IJ36422 |
Possible machine crash when running LKU in presence of WPARs |
|
IJ36437 |
fcstat output
for pend_cmd's may continue to increment. |
|
IJ36472 |
IPv6 perf. degrades with IPSEC, chksum_offload
& ipv6_offload |
|
IJ36473 |
Update signed images inventory |
|
IJ36477 |
LU surr crashed at uipc_usrreq
func |
|
IJ36500 |
IPSECv6 component kernel trace not getting logged. |
|
IJ36508 |
max_npivs not
stored in CuAt at boot or during config method |
|
IJ36509 |
FC adapter Input/Output statistics misreported in VIOS 3.1.X |
|
IJ36510 |
Kernel panic with m_get failure in
cap6_decapsulate |
|
IJ36524 |
Migrations fail at start due to total bytes=0 error |
|
IJ36772 |
mksysb restore
displays error warning if hdisk number different |
|
IJ36774 |
RESTVG ON ON LARGE DISKS MAY FAIL
CREATING FILESYSTEMS |
|
IJ36775 |
LSLPP -L RPM PACKAGE OUTPUT GARBLED FOR CS_CZ LOCALE |
|
IJ36776 |
COMPRESS CMD MAY NOT BE ABLE TO DISPLAY RIGHT OUTPUT IN JAPANESE |
|
IJ36777 |
lsvg/lspv not displaying total, free, used PPs properly for ver |
|
IJ36783 |
VFC4_ERR10 WITH VFC_ERR_LOC_18E LOGGED AFTER RSCN ON 7.2 TL5 |
|
IJ36827 |
Lpar
crashed, where its running iperf |
|
IJ36828 |
Crash seen during IP output queue processinig. |
|
IJ36932 |
/usr/include/stdio.h
unmatched {} |
|
IJ36939 |
no command need to display help about a
ifstat32 tunable |
|
IJ36940 |
script priority is wrong for LVUP_POST_IMPORTVG_1 |
|
IJ36943 |
MEMORY LEAK IN LDAP LOAD MODULE |
|
IJ36944 |
FCP_ERR14 with error code A2 AFTER RSCN ON 7.2 TL5 |
|
IJ37003 |
ASO CORE DUMPS IN PROCESSMAP_MERGE_LISTS() |
|
IJ37005 |
BOS.RTE.SREAMS LEFTOVERS AFTER MIGRATION TO AIX 7.3 |
|
IJ37038 |
LDAP USER/GROUP WITH PARENTHESES NOT FOUND |
|
IJ37046 |
SECLDAPCLNTD MAINTAINS AN INVALID BIND TO SERVER |
|
IJ37047 |
/PROC OPEN FAILS EVEN WHEN EGID RGID SGID MATCHES AFTER IJ21384 |
|
IJ37051 |
A potential security issue exists |
|
IJ37053 |
A potential security issue exists |
|
IJ37057 |
Active System Optimizer jobs not deleted during LPM/DPO |
|
IJ37059 |
Commands are getting hung and software program errors on errpt |
|
IJ37069 |
GettingLVM_SA_QUORCLOSE event
for GLVM Async VG |
|
IJ37072 |
MISSING /ETC/SECURITY/SECMIGCONF FILE WRONGLY LEADS TO SECLPM |
|
IJ37089 |
NEWLY CREATED CERTIFICATES ARE REPORTING EXPIRED |
|
IJ37090 |
FS mount fails after importvg of VG of
encrypted LV's |
|
IJ37094 |
Improve error messages for link-time optimization and ibm-clang |
|
IJ37146 |
Live Update fails when a thread is waiting for a WLM event |
|
IJ37147 |
CFGVIOS NEEDS TO CHECK AND UPDATE SYSTEM MODEL NAME AND ODM |
|
IJ37149 |
discovery failing at startVM |
|
IJ37151 |
Changes to bos.dsc handling in
install. |
|
IJ37152 |
Better processing for ibm-clang with
profile-guided optimization |
|
IJ37189 |
PORTMAP / RPCBIND RETURNING WRONG ADDRESS FOR NIS CLIENT TO USE |
|
IJ37190 |
NFSV4 MOUNT HANG TRIGGERED BY THE REMOUNT COMMAND |
|
IJ37191 |
RUNNING MOUNT -A CHANGE MOUNT FROM HARD TO SOFT |
|
IJ37192 |
GSSD MEMORY LEAK / CORE DUMP |
|
IJ37194 |
ospf_monitor
command core dumps when passed very long argument |
|
IJ37195 |
ntptrace
command core dumps when passed very long arguments |
|
IJ37200 |
Host monitor not started when adding VIOS. |
|
IJ37211 |
Potential hang during storage device removal |
|
IJ37213 |
fix for IJ35178 missing hd_pin and hdcryptmgr |
|
IJ37249 |
perror() gets
unresolved |
|
IJ37250 |
REDUCEVG ON CONCURRENT SVG CAN LEAVE PASSIVE NODE OUT OF SYNC |
|
IJ37251 |
REDUCING THE SIZE OF ALOG CAN CAUSE SOME ISSUES |
|
IJ37254 |
UPDATEIOS TO 3.1.3.10 LEADS TO CLEANDISK UNAVAILABLE FOR PADMIN |
|
IJ37319 |
PATCH PROGRAM ASSERTS WHEN IT CAN'T FIND A HUNK |
|
IJ37322 |
VIO USES TOO SHORT A TIMEOUT TO CHECK IF POOL IS SAFE |
|
IJ37325 |
Lame cache can be abused to severely degrade res |
|
IJ37341 |
audit_svcstart()
should not return -1 |
|
IJ37342 |
TRC_GENERATE_EA_DATA() REPORTING DISTANCE AS INVALID |
|
IJ37386 |
VFC ADAPTER MAY LOG DMA AND ENOMEM ERROR DURING LPM |
|
IJ37387 |
FCSTAT MAY REPORTS INVALID VALUE FOR IN/OUTPUT BYTES |
|
IJ37388 |
wrong error message with API testing |
|
IJ37390 |
RESTVG FAILED AFTER THE SYSTEM RESTORED FROM A MKSYSB BACKUP |
|
IJ37479 |
LINK ERRORS ON NPIV CLIENT WHEN RUNNING CFGMGR ON VIOS |
|
IJ37481 |
VIOS SSP HEALTH CHECK MAY BE DELAYED AND TIMEOUT |
|
IJ37482 |
A potential security issue exists |
|
IJ37484 |
HD_SYNC_TIMER_HANDLER MAY CAUSE RECURLOCK CRASH AT INTIODONE |
|
IJ37528 |
SRCMSTR NOT LOGGING SRC_RSTRT AND SRC_TRYX |
|
IJ37529 |
touch with -r option to file doesn't work |
|
IJ37573 |
ERASE DISKS OPTION NOT WORKING IN MAINTENANCE BOOT |
|
IJ37614 |
AIX 7.2 EXHIBITS SLOW FTPD READ PERFORMANCE |
|
IJ37617 |
Crash at abend_trap when starting pool |
|
IJ37618 |
installp can coredump with XPG_SUS_ENV=ON after |
|
IJ37619 |
MODIFIED STORAGE KEY SETTINGS NOT REFLECTING AFTER UPGRADE |
|
IJ37622 |
aix system
crashes if write is performed on proc file |
|
IJ37630 |
LDAP NEGATIVE CACHE NOT WORKING FOR UID/GID NUMBERS |
|
IJ37631 |
Handle the strdup failures in exit
path of cache update funcs |
|
IJ37675 |
fcstat reports
wrong control requests on virtual fc adapter |
|
IJ37676 |
CAA CL_RESYNC_SITE() DELAYS REBOOT WHEN MERGE OCCURS |
|
IJ37678 |
SUMA FAILS WITH JVMCFRE003 BAD MAJOR VERSION |
|
IJ37680 |
Stopping HA services fails when a node is halted. |
|
IJ37683 |
Update Diagnostics VRMF |
|
IJ37684 |
Diagnostics Disk Maintenance task lists unsupported disk |
|
IJ37698 |
SNMP COMMUNITY NAME IN ODM IS LOST AFTER MIGRATE INSTALL |
|
IJ37710 |
Firmware update causes diagnostic TU41 to fail |
|
IJ37804 |
Update dsc_inventory with new rsct updates |
|
IJ37804 |
Update dsc_inventory with new rsct updates |
|
IJ37814 |
pv
-remove performance fix for SSP |
|
IJ37863 |
CURRENT RULES FILE IS MISSING NEW ENTRIES AFTER UPDATEIOS |
|
IJ37864 |
Clean up error messages for LTO |
|
IJ37879 |
VIOSBR AUTOBACKUP : ERROR- BACKUP XML FILE IS NOT WELL FORMED |
|
IJ37944 |
SYSTEM MAY CRASH WHEN MOUNTING CDROM |
|
IJ37945 |
OLSON TZ: JORDAN STARTS DST FEB 24 22 (2019B) |
|
IJ37950 |
STOP CREATING DATABASE ENTRIES FOR EXPECT/TCL/TK RPM IMAGES |
|
IJ37973 |
Linking errors when using link-time optimization |
|
IJ37974 |
fsck does
not fix issues in dmap leaves correctly |
|
IJ37975 |
POSSIBLE CONFIG HANG IF CLIENT HAS I/O ACTIVE DURING MOVE_LOGIN |
|
IJ37994 |
Restoration of empty pollsets can fail
with EINVAL |
|
IJ38023 |
POSTGRES MAY NOT RUN PROPERLY AFTER UPDATING FROM 3.1.0 TO 3.1.3 |
|
IJ38023 |
POSTGRES MAY NOT RUN PROPERLY AFTER UPDATING FROM 3.1.0 TO 3.1.3 |
|
IJ38024 |
Issues running phases out of sequence in alt_disk_copy |
|
IJ38028 |
GENCOPY -D /DEV/CDX FAILS TO COPY RPM FROM A CD TO DESTINATATION |
|
IJ38137 |
LKU FROM NIM MAY FAIL WITH:KSH: 0403-057 SYNTAX ERROR AT LINE 1 |
|
IJ38139 |
do_trace_control+000264 abend |
|
IJ38140 |
SYSTEM HANG IN PGSIGNAL() |
|
IJ38213 |
FB_DELAY IS NOT WORKING SOMETIMES IN SIMPLIFIED SEA SETUP |
|
IJ38215 |
/OPT/FREEWARE FILESYSTEM CORRUPTED AFTER DVD/NIM MIGRATION |
|
IJ38216 |
rules list not proper for redfish/bluefish fc adapters codedrop |
|
IJ38217 |
VIOS crashed at d_unmap_list_tce+0000A4 |
|
IJ38231 |
Fix syslog to handle ENOBUFS |
|
IJ38232 |
Problem during FWAD init at boot with
LMB sizes larger than 256M |
|
IJ38262 |
vios update
via CDU gave error and io_latency |
|
IJ38265 |
Rare potential crash during LPM when using GZIP accelerator |
|
IJ38266 |
AIX VNIC CLIENT: NETWORK UNRESPONSIVE AFTER RX NETWORK BURST |
|
IJ38301 |
Core dumping code can exceed core file resource limit |
|
IJ38303 |
LPM POST PHASE MEMORY PROCESSING HOLDS ON COMMANDS LIKE VARYONVG |
|
IJ38315 |
DSPMSG ERROR MESSAGE WHEN RUNNING NIMADM |
|
IJ38378 |
IBM i client getting Transport Fault
responses to NPIV L |
|
IJ38382 |
IN ALL SUPPORTED LEVELS SMITTY DATE CAN'T CHANGE DATE AFTER 2038 |
|
IJ38384 |
IKDEB -P THROWS ERROR "A LSP FUNCTION DETECTED A BAD
PARAMETER" |
|
IJ38385 |
Cleanup Microcode
files on Diagnostics Standalone CD |
|
IJ38502 |
Improve package signing process |
|
IJ38506 |
Error while listing rules for num_io_queues
attribute |
|
IJ38606 |
SEA HA state in limbo when changing real adapter |
|
IJ38611 |
cached route using stale pointers |
|
IJ38675 |
RECREATEVG CAN GIVE WARNING WHEN USED ON ENHANCED CONCURRENT VG |
|
IJ38883 |
Write past end of device does not return error code |
|
IJ38894 |
MINISNAP COLLECTION MAY FAIL WITH SYNTAX ERROR |
|
IJ38895 |
Too many of same error message logged |
|
IJ38898 |
Crash in iostdel on rmdev of non-MPIO device with debug kernel |
|
IJ38900 |
crash @ npiv_cmd_handler+000070 |
|
IJ38902 |
SSP cluster create failed due to inability to create database. |
|
IJ38906 |
LDAP USER NOT FOUND EVEN THOUGH IT IS PROPERLY DEFINED |
|
IJ38907 |
Updating timezone data files to latest
available for 2022 |
|
IJ38980 |
IPRA.$_config_args core dump during
COMMIT_LVL script |
|
IJ39009 |
GETGROUPATTR MEMORY LEAK |
|
IJ39012 |
AIX NPIV mapping to one target VIOS with So |
|
IJ39036 |
Support for TL/SP. |
|
IJ39046 |
Need to increase the default size of /tmp |
|
IJ39066 |
VIOSBR: COPY BACKUP XML FILE WHEN INTEGRITY XML CHECK FAIL |
|
IJ39066 |
VIOSBR: COPY BACKUP XML FILE WHEN INTEGRITY XML CHECK FAIL |
|
IJ39108 |
Inquiry 83 retried too many times when LUN is unmapped |
|
IJ39139 |
no accepting value of minus |
|
IJ39159 |
LDAP FAILED TO SEARCH NETGROUP CN=) ERROR |
|
IJ39160 |
alt_rootvg_op -C -b update_all -a |
|
IJ39161 |
Addl. enhancement to ipsec syslogging |
|
IJ39163 |
Crash in remove_child_sibling_link due
to Data Storage Interrupt |
|
IJ39164 |
Npiv client
hang aftr lpm in mix vio
env |
|
IJ39165 |
VIOS may crash during NPIV adapter unconfigure and ras operation |
|
IJ39169 |
Lpar
crashed, where its running iperf serve |
|
IJ39212 |
MEMORY LEAKS IN EFS CODE |
|
IJ39213 |
VIOS crashed during disconnect with active cmds |
|
IJ39224 |
enable vioservice detailed tracing. |
|
IJ39298 |
callout script unable to register to some phases |
|
IJ39299 |
VIOS SSP MAY BECOME UNRESPONSIVE WITH LU/CLONE REMOVE |
|
IJ39304 |
IO error in external snapshot creation causes a hang |
|
IJ39348 |
Disks fail to cfg with cfg_vfc core in clnt |
|
IJ39349 |
SAVEBASE CAN HANG WHEN AIX_STDBUFSZ IS SET |
|
IJ39351 |
FSF_EPS is missing from |
|
IJ39354 |
C_Encrypt()
returns CKR_DATA_INVALID for CKM_RSA_X_509 |
|
IJ39405 |
A potential security issue exists |
|
IJ39427 |
A potential security issue exists |
|
IJ39431 |
CONVERSION OF VEA TO VNIC IN NIB CAN RESULT IN 0950-022 |
|
IJ39442 |
A potential security issue exists |
|
IJ39442 |
A potential security issue exists |
|
IJ39443 |
A potential security issue exists |
|
IJ39526 |
Node is unable to elect due to error querying CAA. |
|
IJ39530 |
SSH STANZA SHOULD NOT APPEAR IN PORTLOG |
|
IJ39531 |
REMOVING EMC FILESETS MAY LEAVE ENTRIES IN DEFAULT RULES FILE |
|
IJ39532 |
Abend_trap in tstart with IPSec filter
enabled |
|
IJ39534 |
Add flexctl support to Marvell FC
adapter driver |
|
IJ39564 |
VIOS SSP pool deadlock with expel and pool event monitoring |
|
IJ39576 |
wwpn for
fcs1 id is always showing "00000000 |
|
IJ39577 |
bos.perf.pmaix update
has empty pmperfrec |
|
IJ39585 |
EEH PERM Error while Restarting prevents moving to Dead state |
|
IJ39587 |
crash @ vfc_npiv_query_channels_resp+0002C0 |
|
IJ39597 |
System crash observed while microcode with EEH |
|
IJ39602 |
add chpv -v m option to manually mark
PV as missing |
|
IJ39716 |
CHFS -N SETS NODENAME ON JFS2 FILESYSTEM |
|
IJ39722 |
multibyte character handling is incorrect when |
|
IJ39725 |
CAA node crash on NODE ADD |
|
IJ39727 |
CAA LACP handling for high load |
|
IJ39801 |
SLOW NPIV I/O RESPONSE ON AIX LPAR BACKED BY QLOGIC HBA |
|
IJ39905 |
NEED TO ADD 'DISK/FCP/POWERSTORE' TO THIS EMCODMTABLE[] |
|
IJ39906 |
VIOGETPGDBVERSION CALLS VIOREADENTIREFILE BUT DOESNT FREE ALLOC |
|
IJ39909 |
Resolve timing issue with unconfiguring vfchost
device |
|
IJ39910 |
vlan
devices may fail to get the updated link status |
|
IJ39911 |
Issue in getting port from DB when user passes FC port |
|
IJ39923 |
Crash in dtSplitPage when zombie
deletes EA file |
|
IJ39930 |
SSP DISK VALIDATION FAILURE MAY AFFECT POOLFS ON ALL NODES |
|
IJ39932 |
alt_disk_mksysb may
require greater than 32MB BLV |
|
IJ39933 |
fix the wrong ret value with no uncommited
updates in updateios |
|
IJ39935 |
crash @ pmtu_alloc+000604 |
|
IJ40037 |
NO LDAP DEFAULT USER COULD CAUSE ISSUES WITH LOGIN OR CACHE |
|
IJ40045 |
LPM can fail under certain rare conditions |
|
IJ40049 |
RAS REGISTRATION FAILED, RASCB POINTS TO RAS_BLOCK_INVALID |
|
IJ40050 |
System crash at scsidisk_d_q_cmd with
EEH reset |
|
IJ40052 |
vfchost state
is defined |
|
IJ40055 |
IN6_IS_ADDR_V4COMPAT returning wrong result |
|
IJ40056 |
Slow shrinkfs and defragfs
performance |
|
IJ40110 |
ERROR MESSAGE IN ACLPUT -R DOESN'T OUTPUT THE FAILING FILE |
|
IJ40111 |
LSGROUP MAY NOT RESOLVE NESTED GROUPS FOR AD |
|
IJ40125 |
FC5899 MUSENT64.KDB MISSING ENTRIES IN TSD |
|
IJ40192 |
VIOSMGR CORE DUMPS WHILE GATHERING QUERY_FC_PORTS ODM DATA |
|
IJ40196 |
Remove stale entry in ODM vscsi
adapter attribute "rw_timeout" |
|
IJ40202 |
Invalid syscall args
can cause system crash |
|
IJ40272 |
ADD FSF_EPS TO EFSMGR FOR NON-DEFAULT UMASK ENVIRONMENTS |
|
IJ40298 |
SYSTEM CRASH IN VNC_PURGE() WITH SKEY EXCEPTION |
|
IJ40303 |
udfcreate not
failing for 4K blocksize devices |
|
IJ40341 |
Add wprotected field to SCSI disk kdb output |
|
IJ40344 |
libviocmnotify.a entry missing in TSD on vios |
|
IJ40348 |
ACLPUT -R CAN CORDUMP WITH LARGE NUMBER OF FILES |
|
IJ40427 |
TRCUPDATE CAN FAIL WHEN UPDATING TO GPFS 5.1 |
|
IJ40430 |
migratable Status in nmon |
|
IJ40433 |
Core file created for program being debugged |
|
IJ40434 |
Crash in iKill while deleting a zombie
file |
|
IJ40435 |
Cluster -create or election fails on a node. |
|
IJ40476 |
IPL_VARYON BOOT HANGS AT LED 551 FOR VERY LONG TIME |
|
IJ40478 |
renamed cmvtscsi didnt
restore, |
|
IJ40530 |
VSCR register not context managed by facility_enable |
|
IJ40540 |
chvg -g
fails with unclear message when PVs have grown in size |
|
IJ40543 |
ra_execlp passes
argv[0] incorrectly |
|
IJ40576 |
Crash while encountering io error while commiting |
|
IJ40604 |
AIX MAY HANG DURING CANCEL COMMAND WHEN VFC IS ENETDOWN |
|
IJ40619 |
FCSTAT FOR CVFCDD ADAPTERS SHOWS SECONDS SINCE LAST RESET=0 |
|
IJ40641 |
System may hang in certain error conditions |
|
IJ40643 |
HIt crash
with xml variation test run on 72X |
|
IJ40674 |
DNS forwarders - cache poisoning vulnerability |
|
IJ40677 |
Crash observed while HTX and OFED test |
|
IJ40698 |
secldapclntd daemon
dumping core |
|
IJ40701 |
sec_open()
failed on NFS files some times. |
|
IJ40748 |
iSCSI disk close hangs |
|
IJ40749 |
Core dumps within viodTrace() in vio_daemon. |
|
IJ40758 |
FCSTAT REPORTS INVALID NO COMMAND RESOURCE COUNT |
|
IJ40765 |
NIM SAVEVG OR MKSYSB ESTIMATED SIZE COMPUTATION CAN BE WRONG |
|
IJ40773 |
In NPIV vfchost may start rejecting
logout with dosconnect |
|
IJ40790 |
Various oncplus memory leaks |
|
IJ40808 |
Firmware update of FCNVMe capable FC
HBA causes errlog entry |
|
IJ40878 |
SORT 0653-650 CANNOT LOCATE THE TEMPORARY DIRECTORY OR /TMP |
|
IJ40879 |
VIOSBR restore failed after rebooted |
|
IJ40914 |
LPM VALIDATION PROCESS MAY TAKE LONG TO COMPLETE |
|
IJ40915 |
auto deletion of old platform dumps with similar filenames |
|
IJ40917 |
ssp lu remove command may succeed when supposed to fail. |
|
IJ40942 |
ADD FLEXCTL SUPPORT TO VFC CLIENT ADAPTER DRIVER (VFC_KPROC) |
|
IJ40968 |
TCP/UDP apps may not work with IPsec IPv6 TCP/UDP tunnels |
|
IJ40969 |
Unconfigure of vfchost adapter may
fail after SRR |
|
IJ41017 |
aix npiv clnt crash@emfsc_strategy_sanity() |
|
IJ41019 |
Writesrv is
struck consuming CPU or coredumps |
|
IJ41020 |
nimadm fixes
for migration to 7.2 |
|
IJ41052 |
PASSWORD HISTORY CHECK NOT WORKING WITH PREFIX_DOLLAR |
|
IJ41057 |
ADD "DELAY_LOG" ODM ATTRIBUTE TO ETHCHANDD |
|
IJ41058 |
NFS4 MOUNT FAILS WITH NETAPP SERVER DUE TO SUPPATTR_EXCLCREAT |
|
IJ41059 |
MFS resign while backing out add disk after error |
|
IJ41093 |
Crash on p10 AIX LPAR testing Oracle RAC |
|
IJ41147 |
OLD FILESETS LEFT AFTER MIGRATED TO AIX 7.3 VIA NIMADM |
|
IJ41148 |
Cluster/SSP data are not updating in SSP GET call |
|
IJ41150 |
nimadm failed
because not enough space in /tmp file system |
|
IJ41153 |
AIXIF_ARP_DUP_ADDR ERROR IN ETHERCHANNEL TEAMING MODE |
|
IJ41154 |
LKU: DUPLICATE IP ERRORS |
|
IJ41155 |
memory leak in socket structures |
|
IJ41255 |
Hangs in quota code when looping quota enable disable |
|
IJ41257 |
lpar
crashed @gids_ok+000060 |
|
IJ41295 |
Support for OpenXL symbol visibility
with LTO |
|
IJ41296 |
0590-102 INCORRECT PROFILE - UPDATEIOS FROM 3.1.3.14 TO 3.1.3.21 |
|
IJ41333 |
The bootlist command fails for iscsi disks |
|
IJ41335 |
restore may not extract file archived by file system |
|
IJ41337 |
Crash on DEBUG kernel in vm_initprivseg |
|
IJ41390 |
KSH93 hang when receiving SIGIO signal |
|
IJ41392 |
updtvpkg may fail
if /usr/bin/uname not
found first in PATH env |
|
IJ41395 |
Threads with TLATENCY are not boosted when flex_latency=1 |
|
IJ41396 |
A potential security issue exists |
|
IJ41397 |
CACHED ROUTE POOL NEEDS TO INITIALIZE ENTIRE ARRAY |
|
IJ41398 |
MPSTAT -S DOESN'T DISPLAY TOTAL PROC USAGE WITH DEDICATED CPU |
|
IJ41399 |
Double unlock in common client create routine function |
|
IJ41400 |
LKU hangs when using ksh93 script |
|
IJ41408 |
CRASH DURING SYNC OF MIRRORED VG DUE TO CORRUPT PREFERRED_READ |
|
IJ41420 |
lpar
crashed @___memmove64+000088 |
|
IJ41422 |
Request to have optics FRU information added to Diagnostic |
|
IJ41424 |
AFTER UPDATE, ICMPV6 NO LONGER RETURNS FROM OUTSIDE SUBNETS |
|
IJ41426 |
system crash when using ipv6 |
|
IJ41503 |
vios_sys.sh entry missing in TSD |
|
IJ41536 |
CAA TIMERS MAY CAUSE ABEND DURING SHUTDOWN |
|
IJ41544 |
motd may
not update properly after running rulescfgset |
|
IJ41580 |
VIOS SSP MAY BECOME UNRESPONSIVE WITH SNAPSHOT REMOVALS |
|
IJ41581 |
mirrorios fails
with smaller disk - mesg is not clear |
|
IJ41582 |
ESA code checkins for AIX73B |
|
IJ41583 |
Create MAX_WQ_THREADS in URH and CACHE ASYNC. |
|
IJ41585 |
Timing issue - ICMP unreachable might crash the system |
|
IJ41587 |
A potential security issue exists |
|
IJ41589 |
lpar got
hung @ipoll_wait_test+000000 |
|
IJ41591 |
Crash vethlpar2 while running workload on it and v |
|
IJ41599 |
krpc socket
bind not releasing lock in error path |
|
IJ41601 |
A potential security issue exists |
|
IJ41624 |
NIM SYNC DOES NOT WORK WITH 10+ INTSALL INTERFACES |
|
IJ41639 |
0N7 sysdumpstart -p hung on VIOS |
|
IJ41746 |
SRC_TRYX, SRC_RSTRT ERRLOG ENTRIES WITH ASO IN VIOS ENVIRONMENT |
|
IJ41747 |
Backup XML file is not well formed error |
|
IJ41752 |
ostd_mem_expand needs
to check for proper context |
|
IJ41766 |
Async adapter diagnostics cause INTRPPC_ERR/ExIntrFlih
in errlog |
|
IJ41772 |
ASO Increase domain consumption threshold |
|
IJ41798 |
lpar got
hung @krlock_confer_norestart |
|
IJ41799 |
Trap in validate_thread_runq when
Active System Optimizer active |
|
IJ41800 |
Mismatch in SSP cluster info between SSP PCM Prefere |
|
IJ41820 |
Trying to bind an invalid socket might result in system crash |
|
IJ41821 |
A potential security issue exists |
|
IJ41970 |
AIO on single-CPU LPAR may hang |
|
IJ41971 |
To address the single GPFS mount point limitation |
|
IJ41974 |
A potential security issue exists |
|
IJ41975 |
Pen test failure |
|
IJ41977 |
Clear dev_info's qstate
when flushing restart dev command. |
|
IJ42019 |
Duplicate symbol error with link-time optimization and OpenXL |
|
IJ42122 |
A potential security issue exists |
|
IJ42157 |
perror
doesn't set correct errno |
|
IJ42158 |
A potential security issue exists |
|
IJ42159 |
A potential security issue exists |
|
IJ42160 |
FALL 2022 DST TIME CHANGES |
|
IJ42161 |
A potential security issue exists |
|
IJ42162 |
A potential security issue exists |
|
IJ42163 |
A potential security issue exists |
|
IJ42163 |
A potential security issue exists |
|
IJ42186 |
NIMADM WITH NFSV4 MAY FAIL IF RPC.MOUNTD IS DISABLED. |
|
IJ42239 |
SNMP DAEMONS ARE NOT STARTED AFTER LIVEUPDATE |
|
IJ42240 |
dnssec-keygen
can not load translation message for usage |
|
IJ42241 |
awk utitlity doesn't report non-zero
exit status |
|
IJ42242 |
ksh core
dumps when thre is no memory |
|
IJ42246 |
System crash observed microcode with EEH |
|
IJ42384 |
LOGINRESTRICTIONS COULD FAIL WITH COMPLEX SYSTEM GRAMMAR |
|
IJ42389 |
update char16_t and char32_t typedefs |
|
IJ42390 |
m_pullup
infinite loop when len = MHLEN and mbuf has M_EXT |
|
IJ42392 |
Disk elevator queue performance tweak |
|
IJ42556 |
Errors shrinkfs/reclaimfs
error path |
|
IJ42650 |
AUDIT SHUTDOWN CRASH WITH MODS IS ENABLED |
|
IJ42651 |
System crashed at groupsetfree |
|
IJ42652 |
Lpar in KDB
while doing Dlpar operation due to debug assert |
|
IJ42653 |
A potential security issue exists |
|
IJ42655 |
Add check in gil thread |
|
IJ42656 |
A potential security issue exists |
|
IJ42657 |
A potential security issue exists |
|
IJ42659 |
SYSTEM CRASH WHEN USNIG ISO IMAGE MOUNTED WITH LOOPMOUNT CDRFS |
|
IJ42660 |
LDAPGETUSRATTR SPLITS ATTRIBUTES AT COMMA |
|
IJ42661 |
EMGR_CHECK_IFIXES SCRIPT HAS WRONG FLRT_HOST AND DOWNLOAD FILE |
|
IJ42662 |
Awk utility writing awk: Error 0 |
|
IJ42664 |
GSSD / KRB5 MEMORY LEAKS |
|
IJ42665 |
CRASH IN NFSV4 WITH MALFORMED REPLY |
|
IJ42668 |
SURROGATE CRASHING DURING NFS SWAP DEVICE CREATION |
|
IJ42671 |
garbled title in ICON Editor |
|
IJ42673 |
Fix for cachefs error logging. |
|
IJ42674 |
A potential security issue exists |
|
IJ42676 |
lpar
crashed @unlock_enable_mem+0001C4 |
|
IJ42677 |
X11 Buffer Overflow(AIX Penetration Test) |
|
IJ42679 |
Cache start taking long time in scalable environment. |
|
IJ42683 |
fc-nvme ctlr
stays dead through one host port |
|
IJ42685 |
Resolve LPM thread stalling |
|
IJ42708 |
SYSTEM CRASH IN RTFREE_NOLOCK |
|
IJ42709 |
A potential security issue exists |
|
IJ42710 |
A potential security issue exists |
|
IJ42712 |
A potential security issue exists |
|
IJ42713 |
A potential security issue exists |
|
IJ42714 |
A potential security issue exists |
|
IJ42715 |
A potential security issue exists |
|
IJ42717 |
A potential security issue exists |
|
IJ42719 |
VNIC client: DSI exposure for ioctl commands
in BOOTING state |
|
IJ43124 |
vioservice fails
to query all requested info for partition query |
|
IJ43125 |
A potential security issue exists |
|
IJ43126 |
list partition attribute query may fail |
|
IJ43127 |
Shell echo built-in gives non-zero return |
|
IJ43141 |
Turn off debug and no-ship defines for
production build |
|
IJ43147 |
SYSTEM MAY CRASH WHEN MANY IO DRIVERS ARE INVOLVED IN IO PATH |
|
IJ43324 |
Add more netstat options to snap tcpip
data collection |
|
IJ43427 |
A potential security issue exists |
|
IJ43431 |
mkvdev command
to map a disk may take more time |
|
IJ43486 |
LCHANGEVG MAY FAIL WITH INCORRECT ERROR MESSAGE |
|
IJ43515 |
ERROR WHEN IMPORTING ENCRYPTION ENABLED VOLUME GROUP |
|
IJ43554 |
Update Diagnostics VRMF |
|
IJ43787 |
VMRM SRC_START error entries flooding the error log. |
|
IJ43888 |
LPAR crashed at facility_enable()
during LPM |
|
IJ43929 |
LPM failed in 26th loop with HSCLA319 error |