PACKAGE: Update Release 3.1.2.10
IOSLEVEL: 3.1.2.10
|
VIOS level is |
The AIX level of the NIM Master
level must be equal to or higher than |
|
Update Release 3.1.2.10 |
AIX 7200-05-01 |
In June
2015, VIOS introduced the minipack as a new service stream delivery vehicle as
well as a change to the VIOS fix level numbering scheme. Please refer to the
VIOS Maintenance Strategy here
for more details regarding the change to the VIOS release numbering scheme.
Be sure to
heed all minimum space requirements before installing.
Review the list of fixes included
in Update Release 3.1.2.10
To take full
advantage of all the functions available in the VIOS, it may be necessary to be
at the latest system firmware level. If a system firmware update is necessary,
it is recommended that the firmware be updated before you update the VIOS to
Update Release 3.1.2.10.
Microcode or system firmware
downloads for Power Systems
If the VIOS
being updated has filesets installed from the VIOS Expansion
Pack, be sure to update those filesets with the
latest VIOS Expansion Pack if updates are available.
Update
Release 3.1.2.10
updates your VIOS partition to ioslevel 3.1.2.10.
To determine if Update Release 3.1.2.10
is already installed, run the following command from the VIOS command line.
$
ioslevel
If Update
Release 3.1.2.10
is installed, the command output is 3.1.2.10.
VIOS 3.1.2.10 adds the following new features:
N_Port ID Virtualization (NPIV) Enhancements
NPIV is a
standardized method for virtualizing a physical fibre
channel port. An NPIV-capable fibre channel HBA can
have multiple N_Ports, each with a unique identity.
NPIV, coupled with the Virtual I/O Server (VIOS) adapter sharing capabilities,
allows a physical fibre channel HBA to be shared
across multiple guest operating systems. The PowerVM
implementation of NPIV enables POWER logical partitions (LPARs) to have virtual
fibre channel HBAs, each with a dedicated worldwide
port name. Each virtual fibre channel HBA has a
unique SAN identity similar to that of a dedicated
physical HBA.
The
following enhancements were made in the NPIV stack in VIOS 3.1.2.10:
·
Added
support for multiple queue capable client logical partitions to leverage
multiple queues provided by physical FC adapter for storage I/O communication.
This allows end to end support for multiple queues in the NPIV stack. The end
to end multiple queues enablement in the NPIV stack requires the VIOS to be at
VIOS level 3.1.2 or later, multiple queue capable client (currently AIX 7.2 TL5
or later), POWER9 system with firmware version FW 940 or higher and 16 or 32 Gb
FC adapters with multiple physical queues support.
·
Added
support for the label attribute at the host virtual fibre
channel adapter. This user-defined attribute can be used to set a meaningful
name for the adapter in order to easily identify it.
·
Added
performance optimizations in the virtual fibre
channel host driver to allocate driver memory from the same affinity domain as
physical FC adapter.
·
Added
support to propagate Fibre Performance Impact
Notifications (FPIN) events to client logical partitions that have the
capability to handle the events. Currently AIX 7.2 TL5 or later uses these
events to find congestion on the path and to use the non- congested path.
SSP Multiple
IP Failover Behavior Change
Starting in
3.1.1.00, storage pool support was added for multiple IP addresses for each
node in an SSP cluster. In this release, a small modification was made to how
we use those IP addresses. Typically, communication is made over the primary
network interface. However, when a failover occurs, we move communications over
to one of the other network interfaces, assuming at least one of them is
functional. In previous releases, we would continue to use that secondary network
interface as long as it continued to function.
In this
release, this behavior has been changed. Communication will return to the primary
network interface as soon as its function is restored. This allows users to
select their primary network interface based on which one is the highest speed,
and then can be assured that the secondary interfaces will only be used until
the primary interface is functional again.
In the
upgrade from 2.X.X.X to 3.X.X.X a change was made to the SSP database
manager. To ensure a non-disruptive
upgrade of an SSP cluster from a 2.X.X.X version to a 3.X.X.X version of VIOS, the
user must first upgrade all nodes in the cluster to the latest version of
2.2.6.X, and then wait until the rolling upgrade completes. At that point, users can install version
3.1.1.X (or any 3.X.X.X version of VIOS) and continue to use their cluster as
normal.
Note: 3.X.X.X nodes are unable to join SSP clusters that
contain nodes below level 2.2.6.31 or clusters with exclusively 2.2.6.31 or
higher nodes prior to the nodes completing a rolling upgrade and saying that
they are ON_LEVEL.
Customers
that do not use Shared Storage Pool will be unaffected by this change.
VIOS 3.1.2.10
can run on any of the following Power Systems:
POWER 7+ or
later.
The following requirements
and limitations apply to Shared Storage Pool (SSP) features and any associated
virtual storage enhancements.
Software Installation
SSP
Configuration
|
Feature |
Min |
Max |
Special* |
|
Number of
VIOS Nodes in Cluster |
1 |
16 |
24 |
|
Number of
Physical Disks in Pool |
1 |
1024 |
|
|
Number of
Virtual Disks (LUs) Mappings in Pool |
1 |
8192 |
|
|
Number of
Client LPARs per VIOS node |
1 |
250 |
400 |
|
Capacity of
Physical Disks in Pool |
10GB |
16TB |
|
|
Storage
Capacity of Storage Pool |
10GB |
512TB |
|
|
Capacity
of a Virtual Disk (LU) in Pool |
1GB |
4TB |
|
|
Number of
Repository Disks |
1 |
1 |
|
|
Capacity
of Repository Disk |
512MB |
1016GB |
|
|
Number of Client
LPARs per Cluster |
1 |
2000 |
|
Network Configuration
Storage Configuration
Shared Storage Pool capabilities and limitations
Please ensure
that your rootvg contains at least 30 GB and
that there is at least 4GB free space before you attempt to update to Update Release 3.1.2.10.
Run the lsvg
rootvg command,
and then ensure there is enough free space.
Example:
$ lsvg rootvg |
|
|
|
VOLUME GROUP: |
rootvg |
VG IDENTIFIER: |
00f6004600004c000000014306a3db3d |
VG STATE: |
active |
PP SIZE: |
64 megabyte(s) |
VG PERMISSION: |
read/write |
TOTAL PPs: |
511 (32704 megabytes) |
MAX LVs: |
256 |
FREE PPs: |
64 (4096 megabytes) |
LVs: |
14 |
USED PPs: |
447 (28608 megabytes) |
OPEN LVs: |
12 |
QUORUM: |
2 (Enabled) |
TOTAL PVs: |
1 |
VG DESCRIPTORS: |
2 |
STALE PVs: |
0 |
STALE PPs: |
0 |
ACTIVE PVs: |
1 |
AUTO ON: |
yes |
MAX PPs per VG: |
32512 |
|
|
MAX PPs per PV: |
1016 |
MAX PVs: |
32 |
LTG size (Dynamic): |
256 kilobyte(s) |
AUTO SYNC: |
no |
HOT SPARE: |
no |
BB POLICY: |
relocatable |
PV RESTRICTION: |
none |
INFINITE RETRY: |
no |
A single, merged lpp_source is not
supported for VIOS that uses SDDPCM. However, if you use SDDPCM, you can still
enable a single boot update by using the alternate method described at the
following location:
SDD and SDDPCM migration
procedures when migrating VIOS from version 1.x to version 2.x
Virtual I/O Server support for Power Systems
VIOS Update Release 3.1.2.10 may be applied directly to any VIOS
at level 3.1.0.00.
The VIOS must first be upgraded to 3.1.0.00 before the 3.1.2.10
update can be applied. To learn more
about how to do that, please read the information provided here.
Warning: The update may fail if
there is a loaded media repository.
To check for a loaded media repository, and then unload it,
follow these steps.
1.
To check for loaded images, run the following command:
$ lsvopt
The Media column lists any loaded media.
2.
To unload media images, run the following commands on all
Virtual Target Devices that have loaded images.
$ unloadopt -vtd
<file-backed_virtual_optical_device >
3.
To verify that all media are unloaded, run the following command
again.
$ lsvopt
The command output should show No
Media for all VTDs.
The Virtual I/O Server (VIOS) Version 2.2.2.1 or later, supports
rolling updates for SSP clusters. The VIOS can be updated to Update Release 3.1.2.10
using rolling updates.
Non-disruptive rolling updated to VIOS 3.1 requires all SSP
nodes to be at VIOS 2.2.6.31 or later. See detailed instructions in the VIOS
3.1 documentation
The rolling updates enhancement allows the user to apply Update
Release 3.1.2.10 to the VIOS logical partitions in the cluster individually
without causing an outage in the entire cluster. The updated VIOS logical
partitions cannot use the new SSP capabilities until all VIOS logical
partitions in the cluster are updated.
To upgrade the VIOS logical partitions to use the new SSP
capabilities, ensure that the following conditions are met:
·
All VIOS logical partitions must have VIOS Update Release
version 2.2.6.31 or later installed.
·
All VIOS logical partitions must be running. If any VIOS logical
partition in the cluster is not running, the cluster cannot be upgraded to use
the new SSP capabilities.
Instructions: Verify the cluster is
running at the same level as your node.
1.
Run the following command:
$ cluster -status -verbose
2.
Check the Node Upgrade Status field, and you should see one of
the following terms:
UP_LEVEL: This means that the software level of the logical partition is higher
than the software level the cluster is running at.
ON_LEVEL: This means the software level of the logical partition and the
cluster are the same.
There is now a method to verify the VIOS update files before
installation. This process requires access to openssl
by the 'padmin' User, which can be accomplished by
creating a link.
Instructions: Verifying VIOS update files.
To verify the VIOS update files, follow these steps:
1.
$ oem_setup_env
2. Create a link to openssl
# ln -s /usr/bin/openssl /usr/ios/utils/openssl
3. Verify the link to openssl was created
# ls -alL /usr/bin/openssl /usr/ios/utils/openssl
4. Verify that both files
display similar owner and size
5. # exit
Use one of the following methods to install the latest VIOS
Service Release. As with all maintenance, you should create a VIOS backup
before making changes.
If you are running a Shared Storage Pool configuration, you must
follow the steps in Migrate Shared Storage Pool Configuration.
Note: While running 'updateios' in the
following steps, you may see accessauth messages,
but these messages can safely be ignored.
Version Specific Warning: Version 2.2.2.1, 2.2.2.2, 2.2.2.3, or
2.2.3.1
You must run updateios command
twice to get bos.alt_disk_install.boot_images
fileset update problem fixed.
Run the following command after the step of "$ updateios –accept –install –dev <directory_name >" completes.
$ updateios –accept –dev <directory_name >
Depending on the VIOS level, one or more of the LPPs below may
be reported as "Missing Requisites", and they may be ignored.
MISSING REQUISITES:
X11.loc.fr_FR.base.lib 4.3.0.0 # Base Level Fileset bos.INed 6.1.6.0 # Base Level Fileset bos.loc.pc.Ja_JP 6.1.0.0 # Base Level Fileset bos.loc.utf.EN_US 6.1.0.0 # Base Level Fileset bos.mls.rte 6.1.x.x # Base Level Fileset
Warning: If VIOS rules have been deployed.
During update, there have been occasional issues with VIOS Rules files getting
overwritten and/or system settings getting reset to their default values.
To
ensure that this doesn’t affect you, we recommend making a backup of the
current rules file. This file is located
here:
/home/padmin/rules/vios_current_rules.xml
First, to capture your current system settings, run this command:
$ rules -o capture
Then,
either copy the file to a backup location, or save off a list of your current
rules:
$
rules -o list > rules_list.txt
After
this is complete, proceed to update as normal.
When your update is complete, check your current rules and ensure that
they still match what is desired. If
not, either overwrite the original rules file with your backup, or proceed to
use the ‘rules -o modify’ and/or ‘rules -o add’ commands to change the rules to
match what is in your backup file.
Finally,
if you’ve failed to back up your rules, and are not sure what the rules should
be, you can deploy the recommended VIOS rules by using the following command:
$
rules -o deploy -d
Then,
if you wish to copy these new VIOS recommended rules to your current rules
file, just run:
$
rules -o capture
Note: This will overwrite any customized rules
in the current rules file.
Applying Updates
Warning:
If the target node to be updated is part of a redundant VIOS
pair, the VIOS partner node must be fully operational before beginning to
update the target node.
Note:
For VIOS nodes that are part of an SSP cluster, the partner node
must be shown in 'cluster -status '
output as having a cluster status of OK and a pool status of OK. If the target
node is updated before its VIOS partner is fully operational, client LPARs may
crash.
Instructions:
Applying updates to a VIOS.
2.
Using ftp, transfer the update file(s) to the directory you
created.
To apply updates from a remotely mounted file system, and the remote file
system is to be mounted read-only, follow the steps:
The update release can be burned onto a CD by using the ISO
image file(s). To apply updates from the CD/DVD drive, follow the steps:
$ shutdown -restart
Note: If shutdown –restart command failed, run swrole –PAdmin in
order for padmin to set authorization and establish
access to the shutdown command properly.
$ clstartstop -start -n <cluster_name >
-m <hostname >
$ ioslevel
Instructions: Checking for an incomplete installation caused by a loaded media
repository.
After installing an Update Release, you can use this method to
determine if you have encountered the problem of a loaded media library.
Check the Media Repository by running this command:
$ lsrep
If the command reports: "Unable to retrieve repository data
due to incomplete repository structure," then you have likely encountered
this problem during the installation. The media images have not been lost and
are still present in the file system of the virtual media library.
Running the lsvopt command
should show the media images.
Instructions: Recovering from an incomplete
installation caused by a loaded media repository.
To recover from this type of installation failure, unload any
media repository images, and then reinstall the ios.cli.rte package. Follow these steps:
1.
Unload any media images
$ unloadopt -vtd
<file-backed_virtual_optical_device>
2.
Reinstall the ios.cli.rte fileset by running the following commands.
To escape the restricted shell:
$ oem_setup_env
To install the failed fileset:
# installp –Or –agX ios.cli.rte –d <device/directory >
To return to the restricted
shell:
# exit
3.
Restart the VIOS.
$ shutdown –restart
4.
Verify that the Media Repository is operational by running this
command:
$ lsrep
|
IJ22649 |
In multybyte
locale diff -i report upper&lower
|
|
IJ22798 |
0042-053 M_CKMAC: THERE IS NO NIM OBJECT NAMED
"CERTIFICATE" |
|
IJ18894 |
DISABLE PLSO ON VEA FOR LOADBALANCER |
|
IJ18896 |
Platform Large send statistics are not reset after entstat -r |
|
IJ18898 |
mkiscsi -f
option does not work with CHAP name |
|
IJ18902 |
Permanent EEH on FC5899 after EEH gets injected |
|
IJ18906 |
RNID ELS Response Payload returns wrong size |
|
IJ18907 |
IO may fail during EEH error conditions. |
|
IJ18911 |
Display transceiver connection speed |
|
IJ18913 |
IO may fail during EEH error conditions |
|
IJ18917 |
Fix various Platform Large Send related issues |
|
IJ18928 |
vioentdd not
restoring ndd_physaddr during close |
|
IJ18953 |
vsnprintf() doesn't set errno correctly in
EOVERFLOW |
|
IJ18969 |
SYSTEM CRASH IN SM4_LOG_CLOSE_GPI IF SS VERIFICATION FAILS |
|
IJ18971 |
IKEV2D COREDUMP IN PROCESS_MSG |
|
IJ18973 |
ALT_DISK FAILURE: /USR/SBIN/ALT_DISK_COPY[1461]:
-M: NOT FOUND |
|
IJ18981 |
Select Input Kuten Panel are not
closed |
|
IJ18983 |
Unexpected input focus change |
|
IJ18985 |
No REIWA Ligature |
|
IJ18988 |
assembler is missing some extended mnemonics |
|
IJ19000 |
KSH JOBS COULD CAUSE BUFFER OVERRUN WITH LONG PID/SERIAL NUMBERS |
|
IJ19001 |
CHSEC DOESN'T MODIFY LDAP_USER ATTRIBUTE W/O VALUE SPECIFIED |
|
IJ19002 |
MEMORY LEAK IN LIBSM.A GET_VGID_FROM_NAME |
|
IJ19003 |
locale -ck doesn't process the command line operands |
|
IJ19004 |
locale -k LC_CTYPE gives same value |
|
IJ19005 |
strings command fails with large XCOFF32 files |
|
IJ19006 |
Unable to create j2 filesystem on a super strict mirrorpool |
|
IJ19364 |
AIX logo doesn't show up on CDE login screen |
|
IJ19375 |
SDIFF DOES NOT PROCESS FILENAMES WITH SPACES CORRECTLY |
|
IJ19377 |
WRITESRV DEAMON STUCK LOOPING IN SIGSEGV CONSUMING CPU |
|
IJ19379 |
DIFF COMMAND ON DIRECTORIES FAILS ON NFS FILE SYSTEMS |
|
IJ19380 |
MAXEXPIRED DOESN'T WORK FOR LDAP USERS |
|
IJ19382 |
trustchk is not
reporting error when dup is pass in syslink |
|
IJ19384 |
Error reading stanza in system reboot |
|
IJ19388 |
ed command alters the file during default signal |
|
IJ19391 |
ed -s is failing without error message |
|
IJ19394 |
awk with
locale LC_NUMERIC gives same value |
|
IJ19397 |
Linker ignores symbol visibility in XCOFF32 archive member |
|
IJ19400 |
trustchk
reports error for /e/s/ldap/*.map files after
update |
|
IJ19404 |
PTHREAD_MUTEX_DESTROY() CAN COREDUMP
WITH PTHREAD TRACE LIBRARY |
|
IJ19409 |
cl_vg_fence_init hung
due to lock condition in disk driver |
|
IJ19411 |
UPDATE 7.1.5.3 TO 7.1.5.4, ON REBOOT LPAR W/VNIC HANGS - LED 581 |
|
IJ19414 |
kdb
command 'scsidisk -o' shows incorrect open list |
|
IJ19435 |
Crash in sn_start_mb_commands_timer: abend_trap |
|
IJ19442 |
Fix vscsi error log entries |
|
IJ19449 |
FC5899 must signal end-of-handling for interrupt offload |
|
IJ19460 |
Manufacture ID missing after download mcode |
|
IJ19467 |
NIM OPERATIONS MAY HANG WITH VERY LARGE LIST OF NIM CLIENTS |
|
IJ19470 |
DUPLICATE ENTRY IN INITTAB IS NOT COMMENTED OUT BY AIXPERT |
|
IJ19473 |
SCHEDO SHOWS WRONG HELP MSG FOR KRLOCK_ENABLE TUNABLE |
|
IJ19477 |
ISSUES WHEN TRYING TO START PERSISTENT NMON VIA "SMITTY
TOPAS" |
|
IJ19479 |
SPLAT DUMPING CORE IN 0XE8A8 |
|
IJ19481 |
SEA: health_time from CuAt might be out of new PdAt
range |
|
IJ19512 |
DISKAVGRIO, DISKAVGWIO description change in nmon
header |
|
IJ19513 |
cache_mgt device
list -l doesn't display pool info |
|
IJ19515 |
pfcdaemon is not
started. |
|
IJ19523 |
Bottom command line doesn't scroll |
|
IJ19525 |
p11admin,p11km error while running on
WPARS. Error AIX CF data |
|
IJ19544 |
mksdict
command does not work |
|
IJ19546 |
Missing square era name Reiwa in charmap |
|
IJ19560 |
NETWORK PERFORMANCE DEGRADED WITH MORE IPSEC FILTER RULES |
|
IJ19563 |
TELNET USER ATTRIBUTE SHOULD BE REMOVED. |
|
IJ19751 |
AIX7 LOGO IS MISSING FROM CDE LOGIN SCREEN ON AIX72. |
|
IJ19786 |
DSI - PROC @percpu_iodone_offl+0004AC |
|
IJ19788 |
LPD RESTARTS WHEN PORTSCANNED (3WAY-RST) |
|
IJ19789 |
chuser
command is not showing correct error msg |
|
IJ19791 |
CALLER3 CRASH IN AHAFS_RELE |
|
IJ20011 |
NFS mounts unavailibility following a
Live Update failure |
|
IJ20014 |
Perl libext not found in TSD. |
|
IJ20018 |
Checksum error hit after migrate
-isolate |
|
IJ20025 |
Need to escape the dollar sign when creating undo.xml file |
|
IJ20028 |
client in hang state after successful lpm |
|
IJ20030 |
commands are getting hung |
|
IJ20037 |
user space kdb coredumps
when running vnic dev command |
|
IJ20039 |
REPORT ALLOCATIONS ARE MISSING WITH MALLOCDEBUG=LOG SET |
|
IJ20101 |
DUPLICATE PACKETS WITH ETHERCHANNEL IN VNIC/SR-IOV ENVIRONMENT |
|
IJ20109 |
ALL TE_POLICY WERE SET TO OFF AFTER UPGRADED TO AIX7.2 TL3 SP3 |
|
IJ20110 |
WITH MULTIPLE ROUTES DEFINED NIMQUERY CAN REPORT INCORRECT GW |
|
IJ20121 |
VIOS ABEND IN NET_MALLOC_CPU DURRING LPM |
|
IJ20122 |
dump command truncates long symbol names |
|
IJ20208 |
IOSTAT -DSAL OUTPUT FOR VSCSI DISKS |
|
IJ20209 |
TOPAS/NMON UTILITIES HAVING VERY SLOW RESPONSE TIME |
|
IJ20212 |
STRINGS SEGFAULT IN MBRTOWC WITH MULTIBYTE DATA |
|
IJ20214 |
Aix client may crash due to stale pointer |
|
IJ20222 |
FAILED VIOSECURE/AIXPERT RULES ON VIOS |
|
IJ20241 |
REMOVING LARGE NFS FILES RETURNS "NO SUCH FILE" ERROR |
|
IJ20332 |
System DSI (NOT panic) in IPRA.$topology_monitor |
|
IJ20366 |
Make resource.h UNIXv7 compliant. |
|
IJ20367 |
Make signal.h and poll.h
UNIXv7 compliant. |
|
IJ20372 |
kdb seaha segmentation fault |
|
IJ20375 |
Oracle coredumped during install |
|
IJ20433 |
nmon coredumps in collectSEAClients |
|
IJ20434 |
NMON CREATING TILDE FILE EVERYTIME NMON IS RUN |
|
IJ20436 |
LSUSER -A MAY NOT SHOW ALL USERS |
|
IJ20516 |
Log replay error (RC_BUSY) for lrMigTraverse
with isolate |
|
IJ20524 |
Dynamic lib using thread-local vars can see corrupted registers |
|
IJ20566 |
getline() did not set correct errno |
|
IJ20567 |
AIX SOFTWARE ERROR or KDB running diag
on EN0H adapter on POWER7 |
|
IJ20568 |
diag -cvd hung after eeh on bell |
|
IJ20569 |
PATH IS DISABLED ON A DYNAMIC TRACKING FAILUREA |
|
IJ20571 |
Make wait.h UNIXv7 compliant. |
|
IJ20573 |
CAA CLCONFD HANGS DUE TO BAD SIGNAL HANDLER CODE |
|
IJ20576 |
AIO may hang with affinity turned off |
|
IJ20577 |
Disable affinity |
|
IJ20689 |
No SIGRECONFIG received by application for NX credit DR operatio |
|
IJ20690 |
AIX may crash with dsi during LPM |
|
IJ20691 |
Diagnostic displays random SFP speed test after wrap-plug test. |
|
IJ20692 |
USER I/O SLOWED DURING THICK LU RESIZING |
|
IJ20702 |
Objects /etc/rc.vnet
& /etc/rc.dt
missing from TSD |
|
IJ20794 |
lvupdateRegCalls help
does not show -l option |
|
IJ20803 |
STARTWPAR LATENCY DUE TO NFS FILE SYSTEMS MOUNT |
|
IJ20856 |
xstr
command does not work correctly |
|
IJ20857 |
VIOS commands calling mklv/lquerypv may fail |
|
IJ20992 |
Shift + p doesn't work at vi after cw
command |
|
IJ20993 |
Secureboot gives
error during first boot after LPAR installation |
|
IJ20994 |
ALT_BOOT_VRMF DOES NOT MATCH BOS_MP64_VRMF |
|
IJ20995 |
COMMANDS LIKE LSSRC OR LSGROUP CAN CORE DUMP |
|
IJ21026 |
PATHS MAY FAIL WHEN OPENING DISKS WITH PERSISTENT RESERVE |
|
IJ21028 |
FC define children migration to non-MPIO not correct |
|
IJ21029 |
Memory leaks in ikev2d & isakmpd |
|
IJ21103 |
RMRAMDISK NOT UNLOADING RAMDISK KERNEL EXTENSION |
|
IJ21105 |
AIX NFS CLIENT CREATING DIRECTORY WITH GID OF -1 |
|
IJ21129 |
iSCSI define children not creating new hdisk |
|
IJ21133 |
HOSTMIBD DUMPS CORE WHILE QUERYING MIB HRDEVICE |
|
IJ21177 |
Merge not taking place after node reboot in split case |
|
IJ21270 |
LKU failed at moving workload phase |
|
IJ21272 |
TRUSTCHK : ADDING
MULTIPLE LIBRARIES FROM THE SAME -F INPUT FILE |
|
IJ21273 |
CSUM DOES NOT READ OUTPUT PAST 4096 BYTES WHEN READ FROM STDIN |
|
IJ21274 |
CHVG -G MEMORY EXHAUSTION WITH LARGE NUMBER OF PPS |
|
IJ21276 |
system crash in copy_context pmsvcs kernel extension |
|
IJ21277 |
VIOS can crash when removing VEA from SEA |
|
IJ21278 |
EMSTAT LOOPS IN SAMPLE_LOOP() WHEN IT
FAILED TO CREATE THREADS |
|
IJ21279 |
PPROF REPORTS NEGATIVE NUMBERS |
|
IJ21306 |
open_memstream() doesnt return byte-oriented.stream |
|
IJ21307 |
mktime() did not set error number to EOVERFLOW |
|
IJ21308 |
LKU failed during blackout time when creating new threads |
|
IJ21497 |
lsmpio -ar shows all paths Failed when some are Available |
|
IJ21501 |
Gen4 NVMe drive VPD support |
|
IJ21502 |
IBM 4767 fails EEH recovery with state ERROR (0x00208000) |
|
IJ21529 |
POSSIBLE UNDETECTED DATA CORRUPTION WITH CERTAIN FIBRE CHANNEL A |
|
IJ21589 |
NEW VIOS DBN ELECTION DOESN'T HAPPEN AFTER FAILORVER. |
|
IJ21837 |
TRUSTCHK : ADDING
LIBRARIES WITH ONLY 64 OBJECTS FAILS |
|
IJ21838 |
LARGE ENTRY IN .SH_HISTORY CAN CAUSE CORE DUMP FOR KSH93 |
|
IJ21839 |
pathchk
doesn't write onto stdout with -P and - |
|
IJ21840 |
fold doesn't treat as '-' when file operand is '-' |
|
IJ21841 |
cat doesn't give expected output argume
begin with '-' |
|
IJ21842 |
getconf
doesn't give file size limit |
|
IJ21845 |
Minor issues with dynamic update of queue_depth |
|
IJ21847 |
Treat ALUA Transitioning state as non-optimized |
|
IJ21856 |
mt__trce pthread_getthrds_np
returns<40> |
|
IJ21858 |
mt__trce can fail to display programs |
|
IJ21861 |
Cache collisions occur with disk worker tasks |
|
IJ21873 |
getty
display IBM copyright that ends with year 2019. |
|
IJ21888 |
snprintf() doesn't set errno correctly in
EOVERFLOW |
|
IJ21971 |
SEA allowing multiple trunk adapters with different VSWITCH ID. |
|
IJ22025 |
SOFTWARE ERROR logged against iscsi0 during boot |
|
IJ22100 |
iSCSI login hangs if sb_max is set to
1GB or greater |
|
IJ22121 |
SECLDAPCLNTD MAY DUMP CORE DUE TO CERTAIN SERVER ERRORS |
|
IJ22122 |
INTERRUPTING USRCK WITH CTL-C CAN DELETE PASSWD/GROUP FILES |
|
IJ22154 |
SEGMENTATION FAULT(COREDUMP) WHEN RUNNING LSGROUP |
|
IJ22155 |
MKINSTALLP MAY FAIL WHEN CREATING ADDITIONAL LICENSE FILESET |
|
IJ22169 |
command doesn't recognize option -p with -v |
|
IJ22170 |
Run time error for CMSG_FIRSTHDR and CMSG_NXTHDR |
|
IJ22171 |
Tunnel state does not go back to "Dormant" for ODT |
|
IJ22172 |
DEPRECATED PERL FUNCTION CAUSES 'DSH -E' TO FAIL |
|
IJ22176 |
possible missing parenthesis ')' or ',' |
|
IJ22198 |
MORE CMD GARBLES MULTIBYTE CHARS SEARCH STRINGS IN JA_JP ENV. |
|
IJ22212 |
NULL assignments to pointers & variables |
|
IJ22266 |
MEMORY LEAK IN GETGRSET_NETGROUP() |
|
IJ22268 |
Crash in iscsisw_strategy |
|
IJ22322 |
LU: UPDATE LVUP_SAFE_KE TO INCLUDE SMT_LOADPIN |
|
IJ22373 |
iSCSI driver improvements for LPM |
|
IJ22376 |
INCORRECT FORMATTING OF INTERVAL NUMBERS IN NMON RECORDING FILE |
|
IJ22418 |
SoE tty state goes DOWN during reboot |
|
IJ22422 |
MULTIPLE PHASE2 TUNNELS FOR SINGLE PHASE1 CANNOT BE ESTABLISHED |
|
IJ22449 |
SECLDAPCLNTD SUDDENLY STARTS CONSUMING LARGE AMOUNTS OF CPU |
|
IJ22472 |
Adding a LAR, interactive mkinstallp
msg issue |
|
IJ22474 |
NDD_ENT_LARGE_SEND SET ON VEA WITH CHKSUM_OFFLOAD=NO |
|
IJ22475 |
ETHERCHANNEL MODIFICATION CRASHES SYSTEM |
|
IJ22476 |
cannot add or delete multiple backup adapters in smit |
|
IJ22479 |
FIND -LS DOES NOT PRINT "P" IN THE MODE FOR PIPE/ |
|
IJ22480 |
PASSIVE CONCURRENT VG DOES NOT COME OUT OF SILENT MODE AFTER LKU |
|
IJ22519 |
tmd dumps
core |
|
IJ22608 |
bootinfo error
installing into wpars |
|
IJ22610 |
ikekey.kdb Lock
contention between ikev2d & cpsd |
|
IJ22613 |
Missing files entries in TSD on VIOS |
|
IJ22614 |
Command hang when closing iSCSI disk |
|
IJ22615 |
RULES COMMAND MAY RETURN BOSBOOT ERROR |
|
IJ22616 |
Potential system crash when system trace is on for hook 419 |
|
IJ22715 |
possible undetected data corruption when rw_max_time
is non-zero |
|
IJ22779 |
clconfd connectmon thread |
|
IJ22797 |
VIOENTDD HANDLES IEEE802.3 ETHERNET FRAMES WRONGLY |
|
IJ22818 |
Add support for links in mount stubs for nfs
lku code |
|
IJ22820 |
Fix vSCSI timer logic for LPM |
|
IJ22905 |
IPsec fails to parse IKE_AUTH with "Unrecognized Notify Error" |
|
IJ22949 |
PMLIST DUMPING CORE IN PMREADEVS |
|
IJ22950 |
ikedb -p
gives error after reboot -q |
|
IJ22952 |
PING DOES NOT ACTIVATE THE P2 TUNNEL ON AIX WHEN P1 IS ACTIVE A |
|
IJ22983 |
Memory leak fix in ikev2d and isakmpd |
|
IJ22984 |
FD leak problem seen during ike
negotiations |
|
IJ23012 |
reducevg
unclear on delay when waiting for inflight reclaim req |
|
IJ23033 |
refresh of ike daemons not cleaning
deleted IPs from netstat o/p |
|
IJ23034 |
IKEv2 OnDemand filter rules are removed after Phase1 Refresh. |
|
IJ23070 |
To support Mellanox Embedded SM and the latest OpenSM |
|
IJ23095 |
POSSIBLE HANG IN ADAPTER DRIVER PRECEDED BY LINK DOWN EVENT |
|
IJ23096 |
POSSIBLE HANG IN ADAPTER DRIVER PRECEDED BY LINK DOWN EVENT |
|
IJ23097 |
ASSERT DUE TO MISHANDLING DEV_RESTART DURING DYNAMIC TRACKING |
|
IJ23130 |
NFSV4 FILE STAT() SYSTEM CALLS SLOW |
|
IJ23131 |
AUTOMOUNTD USES UP ALL MEMORY AND CORE DUMPS |
|
IJ23132 |
PROCSTACK ON 7.2 DOES NOT DISPLAY THE STACK BEFORE SIGNALS |
|
IJ23138 |
LDD IN AIX 7100-05-02-1832 AND 7200-03-02-1846 CAN NOT FIND LIB |
|
IJ23139 |
SEGMENTATION FAULT(COREDUMP) IN PWD -P |
|
IJ23142 |
Diag failed
to format any namespace greater than 9. |
|
IJ23143 |
Handle filename paths in the RTAS snap collection script |
|
IJ23178 |
diff -b fails to treat carriage return as white space |
|
IJ23179 |
chdev fails
to change nthreads SEA attribute |
|
IJ23239 |
Crash seen during rmnode or shutdown
on VIOS using SSP. |
|
IJ23244 |
sa_ &
key_rem_lifetime are non 0
though tunnels remov |
|
IJ23245 |
Err msg coming in console for up level cluster node |
|
IJ23248 |
AIX Diag fail to secure delete RDX
over 1TB |
|
IJ23250 |
Updating timezone data files to latest
available for 2020 |
|
IJ23422 |
DBX CORE DUMPING WITH WATSON2 MALLOC SUBSYSTEM. |
|
IJ23423 |
TRUSTCHK VERIFY UNABLE TO EXTRACT CERTIFICATE ID |
|
IJ23424 |
Performance regression in non-fastpath
AIO |
|
IJ23427 |
STOP A WPAR WOULD UNLOAD RANDOM/URANDOM FOR THE LPAR SOMETIMES |
|
IJ23432 |
redundant print issues in tprof for wpar |
|
IJ23599 |
Diag failed
to display microcode for PCIe3 10Gb 4-Port FCoE |
|
IJ23616 |
SSP POOLFS SERVER STOP MAY TAKE EXCESSIVE TIME |
|
IJ23618 |
ikev2d core dump |
|
IJ23621 |
procstack
reports incorrect stack information |
|
IJ23622 |
jumbo_frames
setting incorrect for adapter added to EtherChannel |
|
IJ23716 |
Some math functions set ERANGE with infinity input |
|
IJ23752 |
Disabling ipsec under high network
load causes system hang |
|
IJ23823 |
IKE Phase2 SA not cleaned up when its Phase1 is deleted. |
|
IJ23826 |
LIBT/LIBPTHREADS.A OUTPUT WRONG PID |
|
IJ23828 |
I/O times out on VFC client lpar |
|
IJ23832 |
lsmpio may
report incorrect connection information for NVMe
disk |
|
IJ23836 |
DMPUNCOMPRESS: CORRUPT INPUT, PARTIAL DUMP FILE IS PRESERVED |
|
IJ23973 |
Cannot map new SSP LU |
|
IJ23976 |
SINGLEBYTE LOCALE DIFF -I REPORT UPPER&LOWER CHAR |
|
IJ24018 |
Error accessing NFS files during LKU |
|
IJ24048 |
core@map_set_dynamic while
doing fsck |
|
IJ24051 |
Unable to replicate an existing spot resource. |
|
IJ24116 |
CREATING A FILE WITH NFS4 MAY RESULT IN AN INCORRECT MTIME |
|
IJ24127 |
Separate IPsec locks into different cache lines to improve perf |
|
IJ24152 |
MKSECLDAP FAILS IF BASE DN CONTAINS A SPACE |
|
IJ24217 |
CAA CLCOMD COREDUMP IN LOG_NLPRINTF() |
|
IJ24218 |
SSP database election taking a very long time or not completing. |
|
IJ24219 |
REORGVG FAILS AFTER DMP DEV CHANGE FROM FW-ASSISTED TO TRADION |
|
IJ24246 |
NETCD CACHES NEGATIVE TYPE 2 ENTRIES WITH A LONG TTL |
|
IJ24254 |
cluster nodes fail when network goes down |
|
IJ24255 |
Assert/crash in vnic stack while
freeing mbuf resources. |
|
IJ24274 |
Address the issues with firmware assisted dump for Veritas |
|
IJ24326 |
lvmo fails
but the values are updated when using LV name |
|
IJ24327 |
snap -U not collecting all files in /var/adm/liveupdate |
|
IJ24329 |
Add PowerVM secure boot support in DSM |
|
IJ24390 |
IPsec filter state information at ike
command |
|
IJ24398 |
VIOS_VFC_HOST ERROR MAY OCCUR DURING LPM |
|
IJ24400 |
CM or DLPAR PCI NVMe bootlist fails |
|
IJ24401 |
vhost or vfchost adapter may hang or crash |
|
IJ24404 |
MARGINALLY SLOWER TO RETRY I/O AFTER I/O FAILURE |
|
IJ24407 |
LVM config commands hang/segmenation
fault |
|
IJ24408 |
reorgvg system
crash if concurrent VG is forced offline |
|
IJ24434 |
math macros evaluated more than once |
|
IJ24438 |
setpwent
changes error number which not supposed to |
|
IJ24439 |
timer_delete() doesn't cancel threads created by timer_create() |
|
IJ24440 |
Modified diagnostics default log file size. |
|
IJ24441 |
WIN-> AIX ping creates new tunnels instead of reusing old |
|
IJ24530 |
Saved set-group-ID does not get set by setregid |
|
IJ24543 |
iSCSI disks or paths not coming available |
|
IJ24544 |
NFS4 EXECUTABLES CAN FAIL WITH "PERMISSION DENIED" MSG |
|
IJ24584 |
lvup_open_devices needs to skip the devices not opened |
|
IJ24587 |
SYSTEM WILL CRASH ON A FIBRE CHANNEL LOGOUT |
|
IJ24588 |
system crash @rrhba_init_adapter+000154 |
|
IJ24635 |
Set FD_CLOEXEC flag on file descriptors opened by liveupdate. |
|
IJ24636 |
The as command mishandles stabstrings
that are too long |
|
IJ24638 |
printf
produces non-standard representation of NaN |
|
IJ24640 |
kill with argument together doesn't work |
|
IJ24646 |
SNAP -E MAY LOG LIVEDUMP MESSAGE IN AIX ERRLOG |
|
IJ24648 |
Kernel error during interrupt deconfiguration |
|
IJ24649 |
ETHERCHANNEL WITH VEA DOESN'T UPDATE PLSO FLAGS |
|
IJ24684 |
NIMCLIENT ERROR ON CONSOLE AFTER NIM MKSYSB RESTORE |
|
IJ24685 |
ikedb made
to error on unsupported config for IKEv2 XML |
|
IJ24686 |
mproc cache
attaching to StabilityMonitorAdvanced |
|
IJ24687 |
NVMe
Download microcode fails on new adapters. |
|
IJ24689 |
AIX parition crashed EEH and rmdev operation on USB |
|
IJ24723 |
HBAAPI INTERNAL CALL TO GA_NXT RESULTS IN ADDITIONAL FCP FRAME |
|
IJ24729 |
Error entry in update and cons log |
|
IJ24735 |
System crash during livedump and autofs unmount |
|
IJ24737 |
System crash in vNIC driver when
accessing invalid lockword |
|
IJ24798 |
Have to increase
semstack limits for compile new locales |
|
IJ24842 |
splat dumps core |
|
IJ24866 |
LS -S INCORRECTLY REPORTS SIZE IN 1024 |
|
IJ24886 |
Using NPIV with VIOS 3.1.1 can cause a crash |
|
IJ24914 |
LKU hung past Workload is running on surrogate |
|
IJ25057 |
topasout -s coredump with topasrec cluster
rec. |
|
IJ25059 |
second inulag -D call has missing exit
line |
|
IJ25060 |
SSP preferences does not have an empty "nodeList" |
|
IJ25067 |
APPLICATION HANG WITH MALLOCTYPE WATSON2 |
|
IJ25069 |
ODM ENTRIES FOR AUTO-REMOVED DUMP DEVICE REMAIN AFTER MIGRATION |
|
IJ25153 |
System crash when accessing NFS4 after Live Update |
|
IJ25196 |
Live Update black out time estimate unrealistic - days or weeks |
|
IJ25199 |
Refresh of the IKE group might cause IKE tunnel outage |
|
IJ25201 |
A potential security issue exists |
|
IJ25206 |
tprof
address bytes header should support 64 bit add |
|
IJ25207 |
SECLDAPCLNTD HUNG JOBS AND MEMORY LEAK |
|
IJ25208 |
Add IANA 2020a TZ changes for Morocco |
|
IJ25210 |
IN RARE CASE FSCK MAY COMPLETE AND LEAVE THE METADATA CORRUPT |
|
IJ25263 |
mklvcopy
striped LV succeeds onto less than stripewidth
disks |
|
IJ25265 |
IPSEC TRAFFIC SELECTOR DOES NOT CHOOSE PROPER PORT RANGE |
|
IJ25266 |
context incorrect for pool fileset inode after disk failure |
|
IJ25299 |
KSU NOT COMPATIBLE WITH GSSD/NFSV4 WITH KRB5 |
|
IJ25300 |
IPv6 IKE Phase2 SA not cleaned up when its Phase1 is deleted |
|
IJ25306 |
Diagnostics Service Aid task reports software error |
|
IJ25356 |
chdev after chdef may not be maintained |
|
IJ25372 |
the ld and dump commands crash upon
bad length stabstrings |
|
IJ25413 |
CORE IN LIBC/LOCAL CODE WHEN USING NIS |
|
IJ25414 |
KRB5 MODULE PREVENTS NON-KRB5 USERNAMES FROM CONTAINING @ |
|
IJ25419 |
Slow TCP performance with Virtual Ethernet Adapter and |
|
IJ25445 |
STREAMS ROUTINES MAY CONSUME ALL CPUS AT INTMAX |
|
IJ25446 |
Enable error messages for lvupdateRegCalls |
|
IJ25492 |
Make iked support more than 32 fds |
|
IJ25494 |
Possible Memory leaks in ike_isakmpd |
|
IJ25495 |
command "caccelstat" can not load translation messages |
|
IJ25526 |
IPSEC MAY SEND INCORRECT MSGID NUMBER PREVENTING TUNNEL STARTUP |
|
IJ25529 |
Various corruption and leaks in ikev2d |
|
IJ25558 |
srcloop got coredump @findEntry@AF38_24 |
|
IJ25559 |
Run only one instance of pmctl at a
time |
|
IJ25563 |
Improve err msg for create SEA w/adapter under other SEA |
|
IJ25570 |
importvg usages
doesn't show -I |
|
IJ25699 |
Resolving ikev2d core dump in check_rekey_msg
function |
|
IJ25713 |
iconv_open() fails with errno 22 when TE=ON &
CHKSHLIB=ON |
|
IJ25736 |
non IKE
traffic should not activate the ODT tunnels. |
|
IJ25738 |
Unwanted messages seen with ikedb -p |
|
IJ25747 |
LPM of Linux clients using iscsi disks |
|
IJ25782 |
USB Diagnostics leaves the device in diagnose state |
|
IJ25786 |
DSH COMMAND FAILS WITH "UNESCAPED LEFT BRACE IN REGEX.." ERR |
|
IJ25788 |
Run only one instance of hpmstat at a
time |
|
IJ25838 |
crash at lock_free_com+000058 |
|
IJ25845 |
Cannot config adapter into kernel |
|
IJ25853 |
ASO DAEMON CORE DUMP IN THE FUNCTION JOB_ADD_SYSTEM_PROCESS() |
|
IJ25867 |
cpio does
not always extract correctly from rpm2cpio archive |
|
IJ25869 |
ikev2d core dumps in an error path |
|
IJ25890 |
Live Kernel Update hang on NFS server |
|
IJ25930 |
IKEV1 and IKEV2 certifcate tunnels
cannot be setup on the same |
|
IJ25931 |
NIMADM incorrectly accepts a machine group target |
|
IJ25937 |
drmgr -l
reports Invalid Script File with trusted execution on |
|
IJ25940 |
elxent_eeh_entry leads
to creach in elxent_bugout |
|
IJ25942 |
ethchan_config -d -b
should return error |
|
IJ25954 |
LPM of linux client using iSCSI backed
disks fails |
|
IJ26035 |
pthread_join() does not handle cancelation requests. |
|
IJ26037 |
lscore give
incorrect error message when queried with module |
|
IJ26049 |
Run only one instance of tprof at a
time |
|
IJ26052 |
exportfs
failure when re-exporting different NFS version |
|
IJ26057 |
NVMe
Product Specific field altered after download microcode |
|
IJ26235 |
SEA RARP PROBLEM WITH SIMPLIFIED FAILOVER CONFIGURATION |
|
IJ26238 |
Add formatted trace in SEA code path where RARPs are sent |
|
IJ26244 |
IPv6 IKE tunnels cause tmd to hang on
the responder |
|
IJ26245 |
Update GSKit header files for IPSec |
|
IJ26247 |
Unable to lower sidle_S3runq_mload tunable with schedo in SMT8 |
|
IJ26249 |
Crash in IPSec esp_rply_decap4() while
freeing mbuf |
|
IJ26250 |
INVALID LOGIN NAME/PASSWORD ERROR GIVEN FOR SUCCESSFUL LOGIN |
|
IJ26251 |
crfs
successfully creates a filesystem on an unavailable lv |
|
IJ26252 |
chvg -g
fails in giving correct output |
|
IJ26253 |
extendvg may
use stale VG information |
|
IJ26255 |
STRESSED PTHREAD_ONCE MIGHT RETURN BEFORE ONCE FUNC IS EXECUTED |
|
IJ26261 |
System hangs with livedump with fwdump test. |
|
IJ26263 |
INCORRECT VPD IN LSCFG OUTPUT FOR 2145/2076 DISKS USING AIXPCM |
|
IJ26264 |
Typo in NVMe download microcode menu |
|
IJ26268 |
Add help_msg_id for EtherChannel mac_swap |
|
IJ26360 |
ARTEXGET 0590-201 ERROR EXECUTING EXTERNAL COMMAND |
|
IJ26361 |
CONNECTION WITH SSP CLUSTER CAN HANG REQUIRING RE-BOOT OF VIOS |
|
IJ26366 |
tmd dumps
core when 'ike' command is used with 'ipaddr' option |
|
IJ26371 |
Live Update failed to restart automountd
on the surrogate |
|
IJ26375 |
ODM cfgmgr_psafe is missing from shientdd |
|
IJ26405 |
shientdd device
odm attribute correction |
|
IJ26500 |
FC5899 missing cfgmgr_psafe ODM
attribute |
|
IJ26541 |
BOOTLIST SHOWS DASH FOR VALID BOOT DEVICES |
|
IJ26658 |
Synchronization issue between shrinkfs
and replacepv |
|
IJ26659 |
Clover EEH test - INTRPPC_ERR - mac3p6 2 |
|
IJ26699 |
vNIC client
driver mbuf leak |
|
IJ26700 |
Improve LGPG creation engine |
|
IJ26720 |
LIVEUPDATE LOG "0590-121 NOT ENOUGH MEMORY" ERROR FROM
ARTEXDIFF |
|
IJ26721 |
Fix protocol value in IPsec auditing |
|
IJ26767 |
CHUSER FAILS TO CHANGE BOOLEAN VALUE ATTRIBUTES WITH 389-DS SR |
|
IJ26768 |
RESOLVING NESTED GROUPS MAKES TOO MANY QUERIES |
|
IJ26769 |
CONCURRENT VG FORCED OFFLINE WHEN DISK MISSING |
|
IJ26770 |
mklvcopy fails
with LV extended to more PV's |
|
IJ26771 |
Add ptools topas
files to snaps |
|
IJ26772 |
report allocation are missing with
watson2 malloc subsystem |
|
IJ26773 |
system crashed @hd_aio_failure_notify+00067C |
|
IJ26775 |
pmsvcs kernel
extension generates EIDT log on LKU and pmcycles |
|
IJ26776 |
memory allocated for perfmon slih min
saving are not freed |
|
IJ26777 |
pmctl -E
exits with Hardware counters already in use error |
|
IJ26781 |
Crash in iscsisw_send_kproc on freed mbuf |
|
IJ26783 |
LOCAL USERS CAN AUTHENTICATE THROUGH KRB5 UNEXPECTEDLY |
|
IJ26784 |
LDAP USER LOGIN CAUSES MANY USER QUERIES |
|
IJ26819 |
Error in generating aggregated metrics for bigcluster |
|
IJ26841 |
Direct Attach to DS8890 cable pulls do not recover |
|
IJ26884 |
snap -d gives error message |
|
IJ26889 |
LS -L DISPLAYED FILE SIZES MAY BE INCORRECT ON NFSV4 CLIENT |
|
IJ26891 |
USB diagnostic displaying wrong menu. |
|
IJ26903 |
cl_local_node_status()
updates |
|
IJ26914 |
Allow LUN RESET on error for iSCSI |
|
IJ26915 |
NVMe
download microcode trims spaces from the microcode level |
|
IJ27053 |
trustchk errors
for files owned by mcr.rte |
|
IJ27055 |
Pool replica set contains disks removed from SYSTEM tier |
|
IJ27059 |
Comment CAA ahafs code to keep
kernel/KE in synch |
|
IJ27084 |
LOGINRESTRICTIONSX IGNORES GRAMMAR WITH LDAP HOST RESTRICTIONS |
|
IJ27168 |
read() may
return less bytes than specified (4*32) |
|
IJ27171 |
bootlist alt_disk_copy alt_disk_mksysb
fail hot plug FC adapter |
|
IJ27205 |
RAS: Extend replicaSet repair to allow
addition of known disks |
|
IJ27218 |
od does not accept UNIX03 8-byte integer type conversions |
|
IJ27221 |
Recovery of async gmvg from mirroring
of aio_cac |
|
IJ27289 |
vlan
traffic stops when dynamically add/delete SEA trunk adap. |
|
IJ27291 |
startwpar should
fail when syncwpar or migwpar
needs to be run |
|
IJ27292 |
PCIDMA errors and adapter fails to configure |
|
IJ27318 |
COMMAND TIMEOUTS AFTER LINK DOWN ON RETRY OF I/O ON GOOD PATHS |
|
IJ27367 |
NFS VERSION 4 MOUNTS NOT BACKGROUNDING |
|
IJ27369 |
NFSRGYD UNABLE TO INTERPRET FREEIPA NAMES |
|
IJ27370 |
LOADING IPSEC AND IPFILTER CAN CRASH SYSTEM |
|
IJ27384 |
Missing FFC in check condition |
|
IJ27650 |
LVM reclaim code should use DF_LBP |
|
IJ27652 |
PASSIVE CONCURRENT VG DOES NOT COME OUT OF SILENT MODE AFTER LU |
|
IJ27653 |
defragfs
command giving too much output for wrong input |
|
IJ27658 |
LKU hang at LED 00e - trace enabled and |
|
IJ27659 |
System crashes when all local disks are removed or failed. |
|
IJ27667 |
snap commands gives error in nfs |
|
IJ27737 |
If liveupdate holds the config_lock, ha_star causes
failure |
|
IJ27740 |
splitvg on an
asynchronous GLVM VG may fail with a core dump. |
|
IJ27756 |
as generates RLD for relative branch when csect
is weak |
|
IJ27765 |
DBN election fails after network error on previous DBN. |
|
IJ27771 |
Cable pulls on one storage type impact paths on ano |
|
IJ27775 |
Minor RAS cleanup/enhancement in Disk Driver |
|
IJ27789 |
soestat -av
displays wrong message for certain statistics |
|
IJ27790 |
SoE fileset may get uninstalled when device is in use |
|
IJ27793 |
RAS fixes & improvements for dpcom |
|
IJ27864 |
Add call to dumpctrl into snap |
|
IJ27869 |
truss cannot create subject process when some kernext are loaded |
|
IJ27870 |
UPDATE ALTLIB SCRIPT TO ENSURE POSIX LC_COLLATION FOR REGEX |
|
IJ27877 |
System crash when VIOS renames a file in the pool. |
|
IJ27879 |
Assembler performance is poor with very large input files |
|
IJ27881 |
AIX or VIOS may crash on FC cable pull |
|
IJ27938 |
NFS4 ACLS NOT RETAINED AFTER A 'CP -P' |
|
IJ27940 |
Block leak after failure to transfer blocks to or from submap |
|
IJ28170 |
Prefetch performance fix for pfFileLogicalToVirtPrefetch |
|
IJ28307 |
Possible crash in FC drivers |
|
IJ28385 |
Possible LPM failure |
|
IJ28387 |
cluster -status command may cause failure. |
|
IJ28413 |
NVMe Diag format task reports software error when F3 pressed |
|
IJ28919 |
LKU fails when shared library file permissions are changed. |
|
IJ28922 |
crash with large number of VFC client adapters |
|
IJ28923 |
VFC client driver loops forever on unexpected PHYP return code. |
|
IJ28924 |
VNIC Client Logical Link Down CMD returns Link Up status |
|
IJ28926 |
kdb may
core dump during snap collection |
|
IJ28939 |
Extended functions in pollset.h cause
g++ compile error |
|
IJ28993 |
Probable system crash with NVMe Over Fibre Channel Traffic |
|
IJ28995 |
VNIC failover backing VF can get stuck in LINK DOWN state |
|
IJ29061 |
PowerVM
response to XSD request has invalid data |
|
IJ29089 |
System dump with IO failed with " -4" status |
|
IV83387 |
Install images for rsct.msg.CA_ES |