=============================================================================== IBM QRadar Firmware Update tool 4389-XXX QRadar Appliances (7914 base servers) Change History Version 6.6.0 - 23/07/2019 =============================================================================== ========================================================================== System: System x3550 M4 UEFI Flash Update Version 3.00, Build ID D7E170C, Critical Release date: June/2019 ========================================================================== -------------------------------------------------------------------------- 1.0 Overview -------------------------------------------------------------------------- Machine Types supported: 7914 Operating systems supported: Operating System Independent -------------------------------------------------------------------------- 2.0 Prerequisites and dependencies -------------------------------------------------------------------------- - The IMM firmware must be at BUILDID: 1AOO58T Version: 4.31 (ibm_fw_imm2_1aoo58t-4.31_anyos_noarch) or higher prior to installing UEFI version 1.50. If the IMM level is lower, the UEFI update module will be rejected as invalid because of additional security features features implemented in this release -------------------------------------------------------------------------- 3.0 Security Fixes -------------------------------------------------------------------------- FIX: - Updated Intel's Processor Microcode to address security vulnerabilities identified in CVE-2018-12126, CVE-2018-12127,CVE-2018-12130 and CVE-2019-11091. - Updated OpenSSL code to address security vulnerabilities identified in CVE-2018-5407. - Fixed an issue when updating the UEFI boot mode option in setup. -------------------------------------------------------------------------- 4.0 Other Fixes -------------------------------------------------------------------------- FIX: None -------------------------------------------------------------------------- 5.0 Enhancements -------------------------------------------------------------------------- ENHANCEMENT: None -------------------------------------------------------------------------- 6.0 Other Changes -------------------------------------------------------------------------- CHANGE: None -------------------------------------------------------------------------- 7.0 Limitations -------------------------------------------------------------------------- LIMITATION: - When flashing UEFI from version 1.30 or later to a version earlier than 1.30, a "Boot Configuration Error" message will be logged into the UEFI error log. This error does has no impact on the system configuration or operation. No errors are logged when flashing from an earlier version to version 1.30 or newer. =============================================================================== Dynamic System Analysis (DSA) Preboot Change History Version 9.54, Build ID DSYTD8G o Enhancement: 1. Embedded DSAp Simplification by removing Low-Value Functionality - Inventory: BIST,PMC - Diags: RSARST Diags, Tape Drive Diags, Optical Drive Diags,Check point (LED) Panel Diags 2. Heartbeat for F2 standalone memory test. 3. IBM High IOPS Adapter Raw Data Collection. 4. pDSA Simplification for FoD Function & GUI Client. 5. Add warning & report in client for nonsupport systems. 6. Change sFTP as the default protocol for transfer log to IBM Service. 7. Get standalone memory test results & SOL support for DSAp(for security efi boot). 8. Update openssl to 1.0.1h from 1.0.1g. o Limitations: 1. After finish run all diagnostics in 25 loop with Emulex 10G options, DSA log will show abnormal, it only record Diags log one time on DSA Diagnostics Completion Log. 2. On GUI, when two ports of the machine want to connect the Extranet at the same time, the machine could not send dsa log to IBM server. you can click test internet connection to solve the problem. 3. System not show event log item in chassis event log & ipmi event log page when trigger SBE in standalone mode. o Special usage: - 2014 IMMV2 2QLFC Product Build =============================================================================== IOS/FW/UEFI Update for ServeRAID H1110 SAS/SATA Controller for IBM System x Controller Supported: ServeRAID H1110 SAS/SATA Controller for IBM System x (81Y4492) NOTE TO SERVICE - Reference RETAIN #N/A Version 1.20.02 ------------- Contains: BIOS Firmware UEFI Driver 7.39.00.00 20.00.05.00 7.27.04.00 - Fixed SMP passthrough command failure due to smp back off interrupt. Appears in system log as 0x311c0030. (SCGCQ00889925) - Fixed issue where host boot fails in the presence of blank flash/corrupt firmware in flash (SCGCQ00894439) - Fixed issue where SATA drive errors, bad performance, or boot failure may appear after update to 20.00.02.00 firmware (SCGCQ00859226)(Retain Tip# H015210) =============================================================================== erveRAID M1000 Series SAS/SATA Controller Firmware Update Adapters Supported: ServeRAID M1115 SAS/SATA Controller for IBM System X (81Y4448) ServeRAID M1015 SAS/SATA Controller (46M0831) Version 20.13.1-0254 -------------------- Version 20.13.1-0252 - Moderate Impact/Low Probability of Occurrence --------------------- Fixes: Fixed issue where wrong drive connector information (connector: null x0) shows in MSM (SCGCQ00996578) Fixed issue where firmware hit assertion while booting with 4K PDs. (SCGCQ00944388) Fixed system hangs that could occur due to recoverable errors being marked as unrecoverable (SCGCQ00923692) Fixed issue where exception would occur during foreign import while importing number of VDs greater than supported count (SCGCQ00931011) =============================================================================== IBM Online SAS/SATA HDD/SSD Update Program. Version 1.23.02 Build ID: IBM12302 ************************************************************************** IBM SAS/SATA HDD/SSD Update Program Version 1.23.02 - Update Utility release for IBM x86 servers. SAS 3.5" - ST1000NM0045, ST2000NM0045, ST4000NM0025 to LK85 - ST6000NM0095 to LC85 SAS 2.5" -HUC101860CSS20E, HUC101890CSS20E, HUC101812CSS20E, HUC101830CSS20E to P2H6 =============================================================================