IBM Corporation --- IBM(R) Maximo(R) Tivoli Process Automation Engine 7.5.0.3 Interim Fix Build: IBM Corporation Note: Before using this information and the product it supports, read the information in the Notices section at the end of this document. (C) Copyright International Business Machines Corporation 2011, 2013. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. =============================================================================================== Table of Contents =============================================================================================== I. Introduction II. Resource Information III. Installation Instructions IV. Manual Changes V. Issues Resolved VI. Notices =============================================================================================== I. Introduction =============================================================================================== Product : Tivoli Process Automation Engine Version : Release 7.5.0.3 Dependencies : NONE PREREQUISITES : Tivoli Process Automation Engine Release 7.5.0.3 has been installed CO-REQUISITES : NONE A Interim Fix is a group of critical issues that have been repaired since the product fix pack or patch was released. The Interim Fix is cumulative and may contain other fixes in addition to the issues that affect your site. The Interim Fix must be applied in full in order to be supportable. Customers should validate this Interim Fix by installing it in a test environment before rolling it out to a production environment. Interim Fixes, by their very nature, go through a limited quality assurance cycle and may not be included in the latest available program patch. =============================================================================================== II. Information Resources =============================================================================================== Information center URL: http://pic.dhe.ibm.com/infocenter/tivihelp/v49r1/index.jsp?topic=%2Fcom.ibm.mam.doc%2Fwelcome.html Description: Access the information center to view the product documentation. Topics include product overviews; installation and configuration tasks; instructions for using, administering, and troubleshooting the product; and security information. Asset Management community on Service Management Connect URL: https://www.ibm.com/developerworks/servicemanagement/am/ Description: Use Service Management Connect to access the product's blogs, wikis, forums, and communities. In Service Management Connect you can review information such as best practices, performance and tuning, and product integrations. You can also collaborate with IBM experts and the broader user community and access continuous open betas. IBM Maximo Asset Management support resources portal http://www-947.ibm.com/support/entry/portal/overview/software/tivoli/maximo_asset_management Description: The IBM support resources portal provides access to tools and resources to keep your systems, software, and applications running smoothly. From the support resources portal you can find fixes, service requests, useful links and an enhanced search to help you find information quickly. =============================================================================================== III. Installation Instructions =============================================================================================== NOTE The Interim Fix file should be copied to a location on the server where Maximo is installed. NOTE For Microsoft Windows 2008 users, you must log in as an administrator before you upgrade to a Maximo Asset Management interim fix. If you attempt to upgrade when you are not logged in as an administrator, the installation fails. NOTE Uninstall Information - This interim fix is provided to you as a PSI zip file. When run with the PSI Installer program, it overwrites your existing Maximo directory structure and may contain database scripts that modify your database. If you want to reverse your changes, you must restore your backed-up versions of the Maximo directory and database. Follow these steps to apply this Interim Fix: 1 Ensure that no database configuration changes are pending. 2 Shut down the Maximo application server. 3 Back up the database. 4 Copy the Maximo directory. 5 Download the TPAE_7503_LAFIX..psi.zip file and copy to the Maximo server. 6 To start the PSI Installer, open the desktop folder Maximo Asset Management and click on Process Solution Installer -SMP. The installer can also be launched by navigating with a command prompt to C:\ibm\SMP\bin and running solutionInstallerGUI.bat 7 In the Introduction panel, click Next. 8 In the Choose PSI Package panel, click Choose, navigate to the TPAE_7503_LAFIX..psi.zip file, select the file, and click Open. 9 Follow the onscreen instructions. 10 Run the 'updatedb.bat' utility to run all the interim fix database scripts: a. At a command prompt, change directory to '\tools\maximo'. For example, c:\IBM\SMP\maximo\tools\maximo. b. Run 'updatedb.bat'. 11 Apply any manual updates listed in this readme.txt file. To find the manual updates for each APAR, the information related to the APAR in the Manual Changes section. 12 Delete the application server cache folders. For Oracle WebLogic Server, delete the 'cache' and 'tmp' folders in \user_projects\domains\mydomain\servers\AdminServer\. Example: C:\bea923\user_projects\domains\max711domain\servers\AdminServer\cache C:\bea923\user_projects\domains\max711domain\servers\AdminServer\tmp For IBM WebSphere(R) Application Server, delete the cache folder in \AppServer\profiles\Custom01\temp\Node01\MAXIMOSERVER\MXServer 13 Delete the Web browser cache on every computer that uses Maximo base services. 14 Rebuild and redeploy the EAR files, and then restart the application server. -------- -------- =============================================================================================== IV. Manual Changes =============================================================================================== --- APAR #: IV27892 Issues(s): defect 61133 Description: In the Work Order Tracking application, when you revise a work order, the incorrect purchase order is revised. Database Scripts: Run the Database script HF7503_01.dbc Manual Changes: 1) Open the Work Order application's presentation in Application Designer . 2) Export the Work Order application to wotrack.xml Save this export in a location where you can edit it. 3) Open the just-saved wotrack.xml in a text editor. 4)Search for - 5) Under this section : look for dataattribute="POLINE.PO.STATUS" Replace with dataattribute="POREV.STATUS" look for dataattribute="POLINE.PO.VENDOR" Replace with dataattribute="POREV.VENDOR" 6) Search for - 7) Under this section , look for dataattribute="POLINE.PO.STATUS" Replace with dataattribute="POREV.STATUS" look for dataattribute="POLINE.PO.VENDOR" Replace with dataattribute="POREV.VENDOR" 8) Save these changes. 9) Import the modified wotrack.xml. --- APAR: IV31642 Issue:12-14551 Description: TPAE/MAXIMO 7.5 COMMUNICATION ERROR OCCURRING WHEN HAVING MULTIPLE INSTANCES OPEN. Database Scripts:HF7503_04.dbc, HF7503_05.dbc Manual Changes: 1) When the db scripts have been run and the new ear deployed and Tpae are running, log into Maximo as an admin. 2) Open the System Configuration > Platfrom Configuration > System Properties application and set the new property mxe.webclient.allowURLDefinedUISessionID to 0 3) Save. 4) Select the checkbox next to the mxe.webclient.allowURLDefinedUISessionID property in the Global Properties Table 5) Perform the Live Refresh action. 6) Select OK when the Live Refresh dialog opens. --- APAR: IV30369 RTC defect : 58740 Description: "BMXAA0029E YOU ARE NOT AUTHORIZED TO PERFORM THIS ACTION" WHENTRYING TO SET QUERY AS DEFAULT OR EDIT AN EXISTING QUERY Database Scripts: n/a Manual Changes: 1) Export the library.xml using Export System XML. Save this export in a location where you can edit it. 3) Open the just-saved library.xml in a text editor. 4)Search for - 5) Replace the text with this - 7) Import the modified library.xml. --- APAR #: IV29695 RTC defect : 70831 Description: BMXAA7095E - The entered value x is not valid. Enter a valid decimal value when updating meter reading in Asset application. Database Scripts: HF7503_06.dbc Manual Changes: N/A --- APAR #: IV39492 Description: Update Rich Text utility not converting communication templates to rich text for secondary languages Manual Changes: Re-run updaterichtext.bat or updaterichtext.sh if you have communication templates for secondary languages. --- APAR #: IV21502 RTC defect : 92945 Description: In the Inventory application, attachments do not display for invoice records that are associated to a PO that has revisions. Database Scripts: Run the database script file HF7503_11.dbc Manual Changes: N/A --- APAR #: IV51794 Description: New images for the ui skin are in date specific folders. Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add or modify the following filter-mapping section: HttpMaxAgeFilter /webclient/skins/* 3) Save file. 4) Build and redeploy ear file. --- APAR #: Defect(s): 131939 Description: Perf - No need to save when user clicks cancel on change status dialog in Scheduler ang Graphical Assignment applications. Manual Changes : 1) Export the scheduler.xml using Application Designer. Save this export in a location where you can edit it. 2) Open the just-saved scheduler.xml in a text editor. 3) Search for - replace with 5) Search for - replace with 7) Search for - replace with 9) Save the modifications and import the modified scheduler.xml. 10) Export the grpassign.xml using Application Designer. Save this export in a location where you can edit it. 11) Open the just-saved grpassign.xml in a text editor. 12) Search for - replace with 14) At the end of the line remove savemode="ONUNLOAD" replace with 15) At the end of the line remove savemode="ONUNLOAD" replace with 16) Save the modifications and import the modified grpassign.xml. --- APAR #: IV60086 Defect(s): 133662 Description: Base Services 7503 IFIX SAVING A SIMPLE SCHEDULE IS EXTREMELY SLOW. Database Scripts: HF7510_05.dbc Manual Changes : N/A --- APAR #: N/A Defect: 135976 Description: Perf - Create index to improve save performance in Scheduler. Database Scripts: Run the Database script HF7510_06.dbc. Manual Changes: N/A --- APAR #: IV50149 Description: Hourly rate for crew types is calculated as the average hourly rate instead of the sum hourly rates. Manual Changes: 1) In Application Designer, export multisite.xml. Save the export to a location where you can edit them 2) Open the just-saved multisite.xml in a text editor 3) Find the line that contains 4) Delete the line "
" 5) Add the line
directly after "" 6) After the "
", add the lines
7) Here is an example of what the lines should look like after all the changes:
8) Save the file. 9) Import the modified xml file --- ==================================================================================================== V. Issues Resolved ==================================================================================================== -------- -------- -------- -------- ============================================================================================== Begin IF001 (TPAE_7503_IFIX.20121008-0739.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV26078 Issue(s):12-14130 Description: In the CU Estimation application, when you accept a CU Estimation, it takes labor values to the related work order; however, the work order value does not equal the value on the CU Estimation. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23510 Issue(s):12-13666 Description: In the Inventory application, when you deactivate the GL Validation field and you populate an issue to field, if you leave the GL Debit and GL Credit fields blank, the error message, "BMXAA1878E - THE CHARGE DETAILS FOR A MATERIAL ISSUE/RETURN HAVE NOT BEEN SPECIFIED," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV24934 Issue(s):12-13927 Description: In the Inventory application, when you update the ExternalRefID on an existing record on MatRecTrans, the update fails when you use an inbound transaction if the issue type is set to transfer. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25881 Issue(s):12-14087 Description: In the Inventory application, the system allows new balances to be entered and saved against an obsolete item. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV26704 Issue(s):12-14164 Description: In the Receipts application, when you void a service reciept that has a negative quantity, you do not get a net result of zero. To void receipts you must enter a positive quantity of one hundred. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV27151 Issue(s):12-14218 Description: In the Assets application, when you move an asset to a different site and location, the error message, "BMXAA0152E - OPEN PURCHASE ORDER EXISTS FOR THE ASSET XXXX CLOSE/CANCEL THE PURCHASE ORDER XXXX BEFORE MOVING THE ASSET," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV24238 Issue(s):12-13793 Description: In the Work Order application, when you save a work order, the item is reserved multiple times. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV26585 Issue(s):12-14165 Description: In the Job Plan application, when a job plan has nested job plans, the error "JOB PLAN HIERARCHY REPORT "ID = 1413" ERR," occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV27573 Issue(s):12-14271 Description: In the Item application, when vendor is set to the default, you are unable to update the InvVendor Last Cost, and the error message, "BMXAA8229W - RECORD INVVENDOR HAS BEEN UPDATED BY ANOTHER USER," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25268 Issue(s):12-14003 Description: In the Inventory application, when an item exists in multiple store rooms and is reserved only on one of the store rooms, you are not able to make the item as obsolete. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25295 Issue(s):12-14018 Description: In all applications, the Data Sheet As Left status was set to an incorrect status of PartVer instead of set to broken. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25595 Issue(s):12-14044 Description: In the Inventory application, when you calculate an invoice, the system rounds the decimal. This changes the resulted value of the invoice to an incorrect number. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV26836 Issue(s):12-14181 Description: In the System UI application, the Rich Text widget is unable to render the HTML code. When you open an inbound email, the body of the message appears blank. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV27843 Issue(s):12-14316 Description: In the Inventory application, when an item is referred as a Revised Purchase Order, the item status cannot be changed to obsolete. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV22806 Issue(s):12-13453 Description: In all applications, when you click on the download link a blank page is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV24192 Issue(s):12-13800 Description: In the System UI application, the required field is not validated if there are any SigOption on any tab in the presentation XML code. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV27792 Issue(s):12-14312 Description: In the Person application, when you remove a supervisor, if you try to add that person again, the error message, "BMXAA4211E - DATABASE ERROR ON PERSONANCESTOR WHEN CHANGING SUPERVISOR ON PERSON RECORD TO THE SAME VALUE," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV28212 Issue(s):12-14361 Description: In the Assets application, when you move a rotating asset from an operating location to a store room, the BIN field is not updated. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV26396 Issue(s):12-14153 Description: In the Inventory Usage application, when you cancel an inventory usage record, the work in the history must remain unchanged, or the error message, "BMXAA4603E- Work Order XXX is in history and must remain unchanged". Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23281 Issue(s): 12-13579 Description: In the Work Order application, when you are on the work order list screen, no message appears to ask if you would like to reinstate the preventive maintenance record while you cancel the PM Work Order. Due to this, no PM is reinstated and the counter is not reset. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23927 Issue(s): 12-13801 Description: When you use a NON-USASCII character with a comma in the display name of an email, the system fails to process the mail address. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25292 Issue(s): 12-14016 Description: In the Integrity Checker application, when you check NumRangeDomain columns, the check fails to compare and query these columns to a domain. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV26859 Issue(s): 12-14191 Description: In the Job Plan application, when a work order safety plan has not populated with the correct information, the system references a job plan with a revision. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV29504 Issue(s): 12-14412 Description: In the Work Manager application, when you search for one craft under the Labor header, the error message, "CROSS ORG ERROR: BMXAA2524E - A DUPLICATE CRAFT EXISTS FOR THIS LABOR," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25234 Issue(s): 12-13998 Description: In the Invoice application, when you import an Invoice XML, the error message, "BMXAA4195E, required field Description is blank," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV24912 Issue(s): 12-13918 Description: When the user is in a different time zon from the server, the AMDaily_Format Report is incorrect. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV26317 Issues(s): 12-14141 Description: In the Job Plan application, when you access a job plan record with tasks and services, the maximum number of expressions in a list is 1000. Database Scripts: N/A Manual Changes: N/A -------- -------- =============================================================================================== End IF001 (TPAE_7503_IFIX.20121008-0739.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF002 (TPAE_7503_IFIX.20130104-1522.psi.zip) =============================================================================================== -------- -------- --- --- APAR #: IV27152 Issues(s): 12-14223 Description: In the Work Order Tracking application, when you use the Work Order Plans tab, the last row of children records are displayed, but the system states that items 1-5 of 7 are displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV22806 Issues(s): 12-13453 Description: In all applications, when you click on the download link to load work orders, a blank page is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29540 Issues(s): 12-14421 Description: In the Invoice application, when you reference a completed PO in a new PO and copy PO lines, the copy conversion displays incorrect values. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26598 Issues(s): 12-14159 Description: In the PO application, when you cancel a PO, reference to a PR is cleared from all PO lines in the PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26919,IV27050 (duplicate of IV26919) Issues(s): 12-14197,12-14213 (duplicate of 12-14197) Description: When you create a new asset in the Meter tab, when you enter a value of a characteristic-type meter with a domain in the New Reading field, the value is not validated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21980 Issues(s): 12-13259 Description: In the Labor Reporting application, when you cancel an invoice it is not removed from the Labor Reporting records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25845 Issues(s): 12-14085 Description: In the Work Order Tracking application, when a work order is generated from a PM with a route, the work order has a description of the location and no description of the job plan. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21466 Issues(s): 12-13037 Description: In the Application Designer application, when you change the INVUSE.INVUSENUM text box to input mode on part 1, patr 2 is changed to input mode and set to read only. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27575 Issues(s): 12-14272 Description: In the Invoice Usage application, the financial period is set to the TransDate not the actual date. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV28537 Issues(s): 12-14370 Description: In the Work Order Tracking application, the view cost shows incorrect estimated labor hours. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30627 Issues(s): 12-14489/Defect: 59909. Description: In the Invoice application, when you remove an invoice line from an invoice that references the LabTran transactions, the LabTran invoice number and invoice line number are not updated to the null attribute. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29743 Issues(s): Defect: 60322 Description: When you upgrade to Maximo 7.5.0.3, the Location Heirarchy by System Report only displays the parent and first child record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30702 Issues(s): Defect: 59912 Description: When you run the jobplan_print.rptdesign, duplicate material lines are displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25612 Issues(s): 12-14050 Description: When you upgrade the system on DB2, the upgrade ends with a stack of overflow errors, and the message, "LAVA.LANG.STACKOVERFLOEERROR UPGRADING TO MAXIMO 7.5.0.2 ON DB2," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26315 Issues(s): 12-14142 Description: In the Start Center application, when you use the Order By clause, some queries do not appear in the result set portlet. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV28210 Issues(s): Defect 61002 Description: When you add a labor contract to a labor actual, and the contract has revisions with a valid start date for a previous revision, the error message, "BMXAA2613E Contract {0} is not active for the start date of this transaction," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24090 Issues(s): 12-13739 Description: In the Security Group application, the terms and conditions can only be edited if the group used has access in certain circumstances. Database Scripts: N/A Manual Changes: 1. Open termcond.xml presentation under the presentations folder 2. Search for id="termcond" 3. Replace the line with --- APAR #: IV23493 Issue(s):12-13658 Description: When you copy a purchase order line that refers to a work order to create a a new invoice line, the account on that line is replaced with an account from the work order. Database Scripts: N/A Manual Changes : N/A --- APAR: IV29475 Issue:12-14411 Description: In Craft application, when you set and save the standard rate to a value of zero, the rate is cleared. Database Scripts:N/A Manual Changes: N/A --- APAR: IV23416 Issue: 12-13632/Defect 61086 Description: In the Reorder application, When the Reorder Items in Detail dialog appears and you click to Run Reorder, the error message, "BMXAA3463E ERROR ON REORDER DIRECT ISSUE ITEMS AND SERVICES IN REORDER ITEMS DIALOG BOX," is displayed. Database Scripts:N/A Manual Changes: N/A --- APAR: IV27627 Issue: 12-14285/Defect 60751 Description: In the Assets application, when the classification update uses the Integration Framework, the update malfunctions when new and old classifications share an attribute. Database Scripts:N/A Manual Changes: N/A --- APAR: IV30433 Issue:12-14475/Defect 61194 Description: In the Invoice application, when an invoice line is created with the Copy PO Lines option, an invalid GL account error occurs that states the invoice line should not have been created. Database Scripts:N/A Manual Changes: N/A --- APAR: IV23065 Issue:12-13526/Defect 58753 Description: In the Work Order Tracking application, when you close a selection of work orders in batch mode, if one of the work orders has a PO line that references the work order, the error message, "BMXAA4577W - Open purchase orders exist here or at some point below in the hierarchy. Would you still like to change the status to Closed," is displayed when you change the status to closed. Database Scripts:N/A Manual Changes: N/A --- APAR: IV26846 Issue: 12-14192 Description: In the System UI application, when you upgrade to Maximo 7.5.0.3 the time fields cut off the display values. Database Scripts:N/A Manual Changes: N/A --- --- APAR #: IV31461 Issues(s):12-14545/defect 61549 Description: In the PM application, when you click to reinstate a PM, the PM counter and Next Date field are not reset when you cancel a PM work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30404 Issues(s): 61814 Description: When the Dynamic Check Asset function is not completed, a work order status can be set to complete, and an error message is displayed that states "The status cannot be changed" and the status has been changed. Database Scripts: HF7503_02.msg Manual Changes: N/A --- APAR #: IV30407 Issues(s): 61826 Description: In the Calibration application, the As Left Status does not calculate the correct value on a data sheet when the As Found status is set to broken. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV28692 Issues(s): 12-14387 / 58415 Description: In the System Object application, when you set an exact search to be case insensitive, the search does not return the correct records, and it is changed to type case insensitve. Database Scripts: HF7503_03.dbc Manual Changes: N/A --- APAR #: IV31162 Issues(s): 61003 Description: When you use the Work Order Detail report, all actual services are shown by the servrectrans object for purchase orders with an approved or revised status. In the Actual Services sub tab there is only one entry for the service. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24240 Issues(s): 61434 Description: When you try to change the status of a PO from PNDREV to INPRG, the status is not changed and a second PO is created with an active status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29537 Issues(s):12-14426 Description: In the Inventory application, if an item has Fifo logic, when an item is issued, the GL account is not merged. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31819 Issues(s):12-14565 Description: In the Assets and Labor Reporting applications, when you use the Select Value box, a closed work order is returned, and the error message, "BMXAA4603E - Activity xxxx is in history and must remain unchanged," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30892 Issues(s):12-14517/Defect 61502 Description: In the PR application, when you create a new requisition and the work flow is initiated, an invalid binding is recieved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27284 Issues(s):12-14245/Defect 58986 Description: In the System UI application, when you open the start center, the screen jumps to the right side of the browser. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29254 Issues(s):12-14404 Description: In the Contract Purchase application, when you have a purchase contract that cannot be released, the Maximum Amount field changes between read-only and editable. Database Scripts: N/A Manual Changes: N/A --- APAR: IV31642 Issue: 12-14551 Description: When a user has multiple instances open with the same state, a communication error occurs and the system does not convey this to the user. Database Scripts:HF7503_04.dbc, HF7503_05.dbc Manual Changes: 1) Once the db scripts are ran and the new ear deployed and Tpae is running. Log into maximo as an admin, 2) Go To System Configuration > Platfrom Configuration > System Properties application and set the new property mxe.webclient.allowURLDefinedUISessionID to 0 3) Save. 4) Then check the checkbox next to the mxe.webclient.allowURLDefinedUISessionID property in the Global Properties Table 5) Perform the Live Refresh action. 6) Select OK when the Live Refresh dialog opens --- APAR: IV31643 Issue: 12-14553 Description: The IBM Http Server times out when a request takes too long. It resends a request to the application server, but the server times out after sixty seconds and the second request is rejected. Database Scripts:N/A Manual Changes: N/A --- APAR #: IV22083 Issues(s):62766 Description: When you run the UPDATERICHTEXT.BAT utility, the SQL exception, "com.ibm.db2.jcc.am.SqlException: DB2 SQL Error: SQLCODE=-805, SQLSTATE=51002, SQLERRMC=NULLID.SYSLH203 0X5359534C564C3031," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27589 Issues(s):12-14270 Description: In the SR application, the Affected Person field is not populated with the same user name that populated the Reported By field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31317 Issues(s):12-14544 Description: In the SR application, you must enter a value in all required fields before the ticket template enters a value. If you change the ticket template value, the error message, "BMXAA8123E - AFTER SELECT ACTION APPLY SERVCIE REQUEST TEMPLATE," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30125 Issues(s): 12-14457 RTC Defect ID 64029 Description: In the PO application, when the contract revision is updated from 0 to 1, the contract breaks and requires a back end script. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32043 Defect: 62653 Description: In the Labor application, when you change the status of a record from active to inactive, an error message, "BMXAA2517E CANNOT CHANGE STATUS TO INACTIVE BECAUSE LABOR XXREFERENCED ON A JOB PLAN," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32363 Defect: 63103 Description: In the Labor Reporting application, when the cursor is in a text box and you use the enter key to add a new row of copies to the current value, when press enter again, another new row with the same value will is created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29715 Defect: 59089 Description: When you create a new invoice and add an invoice line with a work order number inserted in a WAPPR status, the incorrect error message, "BMXAA4603E WHEN WORKORDER IS UNAPPROVED," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31548 Defect: 64697 Description: When the job plan or classification fields change the description of an asset, the work view table is not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV27623 Issue: 12-14283 Description: In the Job Plan application, when you have nested job plans made active by a change in status of one of the job plans, all of the nested job plans are given an incorrect status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29824 Defect: 61141 Description: In the System UI application, when the attachements path are not saved as a URL, the attachement is not viewable. Database Scripts: N/A Manual Changes: There is a new system property added "mxe.doclink.usefileprompt" to enable a browse button to select file attachments that are not copied to the default location. Set the property to 1 to display the browse button on Internet Explorer. The browse button will not work on Firefox. Additionally, you must change a Internet Explorer security settings on the client machine: Tools >> Internet Options >> Security tab >> click zone you want >> Click Custom Level Button >> Under Miscellaneous, enable the property: Include local directory path when uploading files to a server. --- APAR #: IV21384 Defect: 64098 (Issue 12-12975) Description: In Service Requests application, if the customer creates a new record and executes a workflow, the error message, "BMXAA4157E - Not a valid Yes or No value. Enter Y, y, or 1 for Yes or N, n, or 0 for No. MXBoolean Type is not returning 0|1 for true or false," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21384 Defect: 60984 (Issue 12-14478) Description: In the Security Group application, when you submit the self registration form, the error message, "BMXAA4176E - ATTRIBUTE ORGIDDOES NOT EXIST," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24362 Issue: 12-13811 Description: In the Calibration application, the status of incomplete work orders can be changed to complete when the Function Check Asset function is null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32745 Issue: 65180 Description: In the Start Center application, when you use the Quick Insert option, a new ticked ID is not created, and an SR record is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32895 Defect: 64770 Description: In the SCCD application, when you click twice in the combination box, the list is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33139 Defect: 65026 Description: In the Work Order Tracking application, assignements are not generated in a PM, when the PMAL-ready has labor assigned to the job plans. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32000 Defect: 62986 Description: In the Start Center application, when you log out, the minimize and maximize portlet does not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32333 Defect: 63603 Description: In the Start Center application, when you click to update, some portlets display the error message, "There was a problem loading the portlet," and the user must log out. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30266 Defect: 58504 Description: When you use DB2, you cannot import a view that has a native definition in the backend of the database. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33371 Defect: 65495 Description: In the Assets application, you can select a decomissioned asset on the first step for a material requisition without warning. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30369 Defect: 58740 Description: When you try to edit a query or set a query as a default, the error message, "BMXAA0029E YOU ARE NOT AUTHORIZED TO PERFORM THIS ACTION" WHENTRYING TO SET QUERY AS DEFAULT OR EDIT AN EXISTING QUERY," is displayed. Database Scripts: N/A Manual Changes: See Manual Changes Section. -------- -------- =============================================================================================== End IF002 (TPAE_7503_IFIX.20130104-1522.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF003 (TPAE_7503_IFIX.20130422-1040.psi.zip) =============================================================================================== -------- -------- --- APAR #: IV32293 Defect: 67927 Description: In the Assignment Manager application, when you try to modify availability, the error message, "BMXAT0434E - The end time must be later than the start time" when trying to modify availability in Assignment Manager," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32850 Defect: 64807 Description: In the Work Order Tracking application, work order number increments increase by two on duplicate work orders. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33513 Defect: 66747 Description: In the Item Master application, items are returned with different condition codes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34102 Defect: 68396 Description: In the Purchase Contracts application, you cannot add terms and conditions to items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32862 Defect: 68884 Description: In the Inventory Usage application, when you change the status of a record to complete, the error message, "BMXAA7691E - THE STATUS OF INVENTORY USAGE XXX CANNOT BE CHANGED TO COMPLETE," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30761 Defect: 67535 Description: In the Craft Rate look up field, you are unable to perform a wild card search. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33037 Defect: 67340 Description: In the Purchase Requisitions application, when you change a quantity in copied PO lines, the error message, "BMXAA1196W - THE FINANCIAL PERIOD FOR THE SPECIFIED DATE IS CLOSED. THE NEXT OPEN FINANCIAL PERIOD WILL BE USED," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30797 Defect: 66638 Description: In the Work Order Tracking application, you are unable to attach documents to an offering. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29468 Defect: 69476 Description: In the Locations application, when you change the criteria at the top of the Work Details dialog box, the filter on the task is ignored. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24345 Defect: 61750 Description: In the Assets application, MBO records cannot be fetched from the database-classification. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32859 Defect: 64277 Description: In the Work Order Tracking application, an asset error does not display on a work order data sheet Discrete Asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30663 Defect: 59916 Description: In the Work Order Tracking, when a work order has open purchase orders, incorrect lines in the work order status are displayed in the work order history. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33572 Defect: 66814 Description: In the Locations application, you can add an invalid person ID in the Associate Users and Custodians dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31154 Defect: 61013 Description: In the E-Mail Configuration application, an incorrect email is generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29695 RTC defect : 70831 Description: In the Assets application, when you enter a meter reading value, the error message, "BMXAA7095E - The entered value x is not valid. Enter a valid decimal value when updating meter reading in Asset application," is displayed. Database Scripts: Please refer to section III. Manual Changes. Manual Changes: N/A --- APAR #: IV22093 RTC defect : 69015 Description: When you drag a value from the work order number field to the Find field and press enter, the inteded records are not returned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34286 RTC defect : 70330 Description: In the Gannt tab, the resource chart does not display in the lower frame. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24949 RTC defect : 71155 Description: You can create a query that can be used with KPI and maximo changes in Query in Run Time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29262 RTC defect : 57418 Description: When you reverse an invoice with a negative quantity and re-aprove a new invoice with the same purchase order, the invoice matched quantity has an incorrect calculation. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33465 RTC defect : 65897 Description: In the System Object application, when you log in with a second language selected, the error message, "PSDI.UTIL.MXAPPLICATIONEXCEPTION: BMXAA4176E - ATTRIBUTE APP DOES NOT EXIST," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36057 RTC defect : 73243 Description: In the Scheduler application, the JSESSIONID cookie does not have a secure HTTP address. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33944 RTC defect : 67198 Description: In the Purchase Orders application, when you select the "Spare Parts" button on an approved purchase order, you can add and save new items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV31273 Defect: 61366 Description: In the E-Mail Listener application, the functionality fails on the SQL server with a case sensitive mail ID. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36305 Defect: 73926 Description: When you move a dialog box to the upper or bottom border of the window screen, the pointer and the box sticks and you cannot close the box. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36292 Defect: 74010 Description: A null pointer exception occurs when you use a crossover domain on WORKORDER.PARENT that includes an asset number or location information. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35880 Defect: 74357 Description: When you use the transfer out option with multiple user sessions active, incorrect current balances are calculated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25282 Defect: 73395 Description: In the Issues and Transfers application, when you issue an item multiple times, the issue quantity is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29531 Defect: 73403 Description: In the Item Master application, the lot number defaults to a lot number that exists. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33422 Defect: 66751 Description: In the Communincation Template application, when you use the paragraph editor, the Internet Explorer browser crashes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33059 Defect: 73067 Description: In the Meter application, when you select the "Enter Meter Readings" option from the location field of the MultAssetLocCI Table, the location is not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33538 Defect(s):71701 Description: In the Asset application, the View Work Details option does not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV22065 Defect(s):61835 Description: In any application, when you tab through fields the screen pans up. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34526 Defect(s):72823 Description: In the Inventory Usage application, the GL account validation still occurs when it has been disabled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36729 Defect(s): 75909 Description: In the Start Center, when you log in the system hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV23512 Defect(s): 75892 Description: In the Work Order Tracking application, a work order class mismatch occurs, and the error message, "BMXAA4603E MESSAGE FOR WORKORDER WHICH IS IN HISTORY AND MUST REMAIN UNCHANGED," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35903 Defect(s): 72296 Description: In the Cron Task application, the cron task does not evaluate the material available with an INPRG status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33534 Defect(s): 66391 Description: In the Item Master application, when you change an attribute value for rotating items, an error occurs with the specification modifications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24704 Defect(s): 61087 Description: In the Labor application, when you return a value on the Assignment tab, the error message, "BMXAA4176E - Attribute CONTRACTNUM does not exist. Gather the logs from the directory and determine the process or app referencing the invalid attribute," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33145 Defect(s): 77006 Description: In the Assets application, when the downtime cycle is completed, the start code sets to null in the Manage Downtime History dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25800 Defect(s): 70157 Description: In the Purchase Order application, when a purchase order is revised but in PENDREV status, receipts cannot be voided. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV36842 Defect(s):76829 Description: In the Asset application, the advanced search drilldown option does not work. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV29947 Defect(s):75830 Description: In the Purchase Contracts application, when you create a consignment invoice, you are unable to add a new line or tax. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV37053 Defect(s):77303 Description: In the Create Requisition application, the work order look up has a performance issue. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23875 Defect(s): 68832 Description: When you tab through fields, the navigation bar disappears. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV36124 Defect(s): 73836 Description: In the System User Interface application, when you edit the RTE in Firefox, you need to click the save button twice for items to save. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23037 Defect(s): 70019 Description: In the System UI Security Scans application, you cannot log in with a password that contains special characters from the LDAP. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV36847 Defect(s): 78638 Description: In the Chart of Accounts applicatoin, when you new GL components with more than 20 organizations, the error message, "BMXAA0024E ADD IS NOT ALLOWED ERROR WHEN ADDING NEW GL COMPONENT," is displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV37122 Defect(s): 78551 Description: In the Work Order Tracking application, when you report actuals on a work order, actual labor hours are not included in the premium pay hours. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV33726 Defect: 78783 Description: In the Work Order Tracking application, when you type any text in the memo-field and press enter, the "Change Status" box hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32733 Defect: 64702 Description: In the Report application, you are unable to create a QBR report in the work order module. If you do not set filters or leave parameters unfilled, the CPU spikes on the server and consumes large amounts of memory. Database Scripts: HF7503_07 Manual Changes: Set the value of the mxe.report.adhoc.previewLimit property. --- APAR #: IV36320 Defect: 74969 Description: In the Inventory application, you are unable to create desktop requisitions for items in another storeroom or site. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34498 Defect: 78709 Description: When you use the Clear Chagnes button, a null pointer exception occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36668 Defect: 76207 Description: You can create two purchase order lines with the same line number. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37220 Defect: 78859 Description: When you close purchase orders with uninvoiced receipts, no system message is received. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33367 Defect: 74605 Description: In the Application Designer, when you edit an application with a left side bar navigation, the Application Designer is unusable. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35668 Defect: 70849 Description: In the Assets application, you cannot add assets to tickets with inactive or maintenance states. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36812 Defect(s): 76901 Description: In the Purhcase View table, incorrect released purchase order relationships are displayed. Database Scripts: HF7503_08.dbc Manual Changes: N/A --- APAR #: IV36879 Defect(s): 80300 Description: In the Work Order Tracking application, you cannot save a work order with conditions enabled for planned items. The error message, "BMXAA1895E-ITEM XXXXX IS CONDITION ENABLED.PLEASE ENTER A CONDITION CODE. LOOPING ERROR," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37634 Defect(s): 80044 Description: In Drilldown dialog, if all child assets are decommissioned, the parent asset displays a plus sign when no child assets are displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV28540 Defect(s):76986 Description: When a work order is set to Complete, the system deletes outstanding inventory usage records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35601 Defect(s): 70543 Description: When you receive a consignment item, the GL debit account is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36528 Defect(s): 80253 Description: In the Inventory application, when the WOMaterialStatusUpdateCronTask is run, the error message, "BMXAA4025E - NO EXTERNAL DEFAULT VALUE WAS FOUND FOR THE INTERNAL VALUE NULL IN DOMAIN MTLSTATUS WHEN WOMATERIALUPDATESTATUSCRON IS RUN," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37660 Defect(s): 80155 Description: In the Purchase Order application, when an item consignment flag is present on a purchase order that has been revised, the flag cannot be changed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21638 Issue(s): 12-13109 Defects: 81362 Description: In the Web Services Library application, when a web service call that results in the MaxMessage Cache is performed, the error message, "NoSuchMethodException Issue error," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33371 Defect(s): 78128 Description: When you are on step 2 of a material requisition, you can select a decomissioned asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36730 Defect(s): 75834 Description: In the Preventive Maintenance application, when you generate a work order from preventive maintenance, the "Please wait" dialog is not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33062 Defect(s): 81258 Description: When you leave a a field, you must press the save button twice for changes to be saved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36375 Defect(s): 74143 Description: When you add a script to a portlet, the portlet is stuck in a loop. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36897 Defect(s): 77080 Description: You can adjust the current balance of an item with an obsolete status with an associated BIN. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38016 Defect(s): 81554 Description: In the Asset application, an asset meter life-to-date is increased by the rollover value if a reading value of 0 is entered. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV22236 Defect(s): 81321 Description: In the System User Interface application, when you open a second browser tab, you are unable to open Maximo 7.5. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38133 Defect(s): 81763 Description: In the Purchase Order application, you cannot complete an internal purchase order, when the items belong to a group with a storeroom and site that has access without security. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37131 Defect(s): 82119 Description: In the Inventory application, when inventory status is set to pending, you can make inventory adjustments. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37943 Defect(s): 81625 Description: In the Inventory application, when you select all records and try to reconcile balances, the error message, "BMXAA4214E - AN UNKNOWN ERROR HAS OCCURED WHEN TRYING TO RECONCILE INVENTORY ON THE LIST TAB," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36519 Defect(s): 75725 Description: In the Core and PlusGMOC applications, you cannot make a field read-only if it has a look-up long description. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37411 Defect(s): 79079 Description: You cannot move a rotating asset with sub assemblies of two levels or more to another site and location. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37803 Defect(s): 81020 Description: In all applications, the GL search option is slow when there is a large number of GL account records returned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33593 Defect(s): 81534 Description: In the Purchase Orders application, purchase orders do not use the new model number information. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38545 Defect(s): 83620 Description: When you take meter readings against the MultiAssetLocCI via the Details button on the asset field, an entry is not made in the WOMeter table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37408 Defect(s): 79613 Description: When the user locale is set to "th_TH", you are unable to change the location status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV30774 Defect(s): 80987 Description: In the Work Order Tracking application, you receive a revised 1 purchase order with a work order, but the WMATL does not change the status to APPR. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38075 Defect(s): 84201 Description: In the Inventory application, when you try to cancel a service request with the "Automatically create usage documents for new reservations?" option enabled, the error message, BMXAA0024E The action delete is not allowed on object INVUSE. Verify the business rules for the object," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36434 Defect: 84363 Description: In the Work Order Tracking application, an SQL error occurs when you click on the "view Attachment" button. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37303 Defect: 80232 Description: In the Work Order Tracking application, when you change the status of a work order, the function does not work with specific organization and site work order status synonyms. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37455 Defect(s): 84217 Description: In Maximo 7.5.0.0, communication errors are displayed in multiple screens and transactions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV29596 Defect(s): 81564 / 12-14429 Description: When you uncheck a copied document from the default location value, an invalid binding occurs in the Specify a File field. Database Scripts: N/A Manual Changes: 1) In Application Designer select Action menu to Export System XML. 2) Press export icon for Library presentation. 3) Edit the library.xml with a text editor and change the following two lines and replace "filepathname" with "urlname": Old: New: Note, the lines are not side-by-side in the xml. They are contained in two different dialogs. 4) In Application Designer select the Import Presentation button to import the library.xml. --- APAR #: IV27892 Defect(s): 61133 Description: In the Work Order Tracking application, when you revise a work order, the incorrect purchase order is revised. Database Scripts: Run the Database script HF7503_01.dbc Manual Changes: See the Manual Changes section for this APAR --- APAR #: IV31290 Defect(s):61416 Description: The result set portlet conditional font color does not work for replacement variable comparisons. Database Scripts: N/A Manual Changes: To use a replacement variable you must prefix it with a colon and it is case insensitive. The following replacement variables are supported: :yes :no :date or :&date& :datetime or :&datetime& :time :hostname or :&hostname& :user or :&username& :personid or :&personid& --- APAR #:IV32009 Defect: 64763 Description: In the Work Order Tracking application, duplicate work orders inherit route values. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32545 Defect(s): 64016, 70258 Description: In the Work Order Tracking application, work flow manual nodes are not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34306 Defect(s): 68813 Description: When you apply the IV30369 APAR, you cannot expand saved queries. Database Scripts: N/A Manual Changes: Import the library.xml that comes with the Interim Fix using Application Designer. --- APAR #: IV38646 Defect(s): 84196 Description: In the Inventory application, the InvReservationRESTypeUpdateCronTask creates excessive cursors and runs into Maximo open cursors errors. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21371 Defect(s): 85310 Description: You cannot query job plan records by the site ID. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36996 Defect(s): 77008 Description: In the Receiving application, when the Receipt Tolerances function is read-only, when the quanity is null it can be edited. When the Receipt Tolerances function is editable, when the quantity is null it is read-only. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39324 Defect(s): 85740 Description: When you try to change an inventory usage record status to complete, errors occur. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38988 Defect(s): 86189 Description: In the Object Structures application, the Value "FILE" for sysnonym domains in URLTYPE is transalatable. You need to use internal values to compare with type "FILE". Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39339 Defect(s): 85756 Description: When a reverse invoice is generated, the next created invoice does not have a concurrent invoice number. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38298 Defect(s): 81920 Description: In the Cron Task Set up application, the cron task manager throws an SQL exception for active cron tasks over 1000. Database Scripts: N/A Manual Changes: N/A -------- -------- =============================================================================================== End IF003 (TPAE_7503_IFIX.20130422-1040.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF004 (TPAE_7503_IFIX.20130530-2110.psi.zip) =============================================================================================== -------- -------- --- APAR #: IV33442 Defect(s): 66377 Description: In the Labor Reporting application, when you use the Enter by Crew option, you cannot save the record. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV35732 DEFECT: 71501 Description: In the Inventory application, shipment receipts have an incorrect status when they are returned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV32423 Defect: 63668 / 12-14603 Description: In the Purchase Contracts application, when a contract has a WSTART status, you cannot revise the contract. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34357 Issues(s): 68791,82130 Description: In the Work Order Tracking application, when you change the status of a work order and specify a future date the following error message displays: You entered: null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35394 Issues(s): 87000,71031 Description: In Maximo Asset Management Scheduler, users can incorrectly update records for sites for which they have read only access. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38238 Issues(s): 83374 Description: In the Purchasing Contract application, when you try to create a purchase contract from a standard service PR line by using the Copy PR Lines to Contract action, the item number is not brought over. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26717 Issues(s): 86275 Description: In the Purchase Requisitions application, when the Create PO from PR action is executed, the PO lines do not display in the correct order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39810 Issues(s): 87007 Description: When you upgrade to Maximo Asset Management 7.5.0.3, if one orgization asset is associated with a given item, the Assets by Subassembly Items report returns assets from all organizations. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35897 Issues(s): 72631 Description: In the Maximo Asset Management 7.5.0.3 fix pack, when a user tries to add an attachment, error message number BMXAA1577E always displays in English. --- APAR #: IV37716 Issues(s): 80653 Description: In the Purchae Orders application, the issue unit/costs not included in the cost management when an item is issued in different units in multiple storerooms. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38607 Issues(s): 83615 Description: In the Labor Application, if you try to change the status of labor records on the List tab, the status of all the records are changed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40204 Issues(s): 87753 / 13-10483 Description: In the Labor application, if you not have a default site specified for your user, you cannot view craft information for labor records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34267 Issues(s): 76323 Description: In the Email Configuration application, you are incorrectly able to add two users with the same email address if the addresses are written in different cases, uppercase and lowercase. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36814 Issues(s): 76890 Description: In the Assets application, the Attributes Search is returning incorrect results. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24401 Issues(s): 88379 Description: In the Purchase Orders application, you cannot cancel a purchase order (PO) when receipts have been voided on the PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39777 Issues(s): 86768 Description: In the Failure Codes application, when you try to delete a failure code that has the same failure class as a failure code from another organization, the following message is displayed: BMXAA1161E - Failure class is referenced by a work order and may not be deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39492 Defect: 86854 Description: In the Communication Templates application, the Update Rich Text utility is not converting the communication templates to rich text for secondary languages. Database Scripts: N/A Manual Changes: If you have communication templates for secondary languages, run the updaterichtext.bat or updaterichtext.sh files again. --- APAR #: IV38067 Issues(s): 81713 Description: In the Inventory application, you can incorrectly add reservations to obsolete items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39329 Issues(s): 88336 Description: In the Invoices application, when you create an invoice, specify the necessary information, and save the record, the following error message displays: BMXAA4214E - An unknown error has occurred. Please contact your system administrator for assistance. Gather the logs from the directory and determine where and why the error is thrown. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25560 Issues(s): 62853 Description: In the Email Listener application, the email address is being doubled quoted inside of LSNRUtil. Both HMailServer and Exchange throw the same invalid email address error. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41175 Issues(s): 88932 Description: In Maximo Asset Management Scheduler 751, when you change the status of a task on the Gantt View, the filter settings are cleared. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33972 Issues(s): 87482 Description: In the Assets application, you cannot move a rotating item to the storeroom after a purchase order is revised. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38655 Issues(s): 87508 / 13-10391 Description: In the Inventory Usage application, when you assign items to work orders and there is a negative balance, there is no way to determine which item is causing the negative quantity. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41221 Issues(s): 88889 Description: In the Job Plans application, the Attribute Search is not working. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41219 Issues(s): 89043 Description: In the Assets application, the Go To Classification function does not return classifications when duplicates exist. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38342 Issues(s):86357 Description: In the Application Designer application, the Advance search of the Purchase Contracts application does not display company records based on the parent company of the vendor. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39729 Issues(s):86859 Description: In the Invoices appliaction, the PO line specification does not get copied to the invoice line specification if the user uses the Material tab in the Copy PO Lines window. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38098 Issues(s):83828 Description: In the Qualifications application, the Labor field is a mandatory field but the red error icon that indictaes that a field is mandatory is missing. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37126 Issues(s): 80231 Description: In the Purchase Orders application, the PO header incorrectly references the contract number. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV42166 Issues(s): 89901 Description: In the Attached Documents application, the name and description fields for the Add Attachment dialog box are missing. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37341 Issues(s): 82139 Description: The number and bullets icon is not working in the Rich Text Editor in Internet Explorer 8. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41544 Issues(s): 89271 Description: On workorders that have a related workorder record, when opening the log tab the application hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37616 Issues(s): 90558 Description: Invalid binding appears on select value window in routes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35724 Defect(s): 71060 Description: In the Work Order Tracking application, you cannot cancel from the Select Owner window. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV42660 Defect(s): 91045 Description: In the Work Order Tracking application, you cannot issue a part to an asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41520 Defect(s): 90342 Description: In the Inventory application, you cannot assemble kits if the kits contains the type first in, first out (FIFO) or last in, first out (LIFO). Database Scripts: N/A Manual Changes: N/A --- APAR #: IV42670 Defect(s): 91063 Description: In the Work Order Tracking appliaction, when you issue and item to an work order, the reservation incorrectly remains on the reservation list. Database Scripts: HF7503_10.dbc Manual Changes: N/A --- APAR #: IV22266 Defect(s): 91079 Description: In the Cron Task Setup application, in a clustered environment the getParameter() method in SimpleCrontask implementation does not close the MboSet right away and the connection is left open for a long period of time if the server does not get to run the crontask action. --- APAR #: IV40663 Defect(s): 88147 Description: In the Inventory application, items are not being previewed in the Soft Reservation field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39097 Defect(s): 85016 Description: In the Application Designer application, the following fields are cut off: ACTIONSCFG, DOMAINADM, FACONFIG, INBXCONFIG, KPIGCONFIG, KPILCONFIG, REPLISTCFG, RSCONFIG, and SCCONFIG. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37425 Defect(s): 86196/13-10276 Description: In the System User Interface application, filtering words that include scripts in the Wonum field return a JavaScript error. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38931 Defect(s): 90845 Description: In the Start Center application, the Start Center icon remains on the screen when a Circle graph is created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41457 Defect(s): 89855 Description: In the Inventory application, values in the Other Balance Summary Information section are not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37140 Defect(s): 78616 Description: In the Item Master application, self-service users are getting an error when the attempt to view item images. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37611 Defect(s): 90377 Description: In the Work Order Tracking application, the Duplicate Work Order option in the Select Action field generates the following error: BMXAA4131E - Record has been duplicated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37310 Defect(s): 78769 Description: In the Navigation section, when the Attribute Expanded option is set to false the window collapses and cannot be expanded. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41905 Defect(s): 89730 Description: In the Purchase Requisitions application, when you attempt to create a contract you get the following warning message: BMXAA0736E - Please enter order unit for line 1 when trying to create a contract from PR app. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35491 Defect(s): 91519 Description: In the Scheduler Application, the Gantt chart is only white after you refresh the browser in explorer. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37372 Defect(s): 82147 Description: In the Rich Text Editor on Long Description fields, when the field is filled in enough to create a scrollbar, the up and down arrows on the scrollbar moves the cursor to the bottom rather than scrolling up or down. Database Scripts: N/A Manual Changes: N/A -------- -------- =============================================================================================== End IF004 (TPAE_7503_IFIX.20130530-2110.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF005 (TPAE_7503_IFIX.20130701-0736.psi.zip) =============================================================================================== -------- -------- --- APAR #: IV38197 DEFECT: 83812 Description: In the Purchase Order application, When you cancel a purchase order revision, the purchase receipt that references that purchase order is removed. Database Scripts: N/A Manual Changes: N/A --- --- APAR #: IV43020 Defect(s): 91850 Description: In the Preventative Maintenance application, when more than 1000 work assets are used in the Job plan, work orders cannot be generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21502 RTC defect : 92945 Description: In the Inventory application, attachments do not display for invoice records that are associated to a PO that has revisions. Database Scripts: HF7503_11.dbc Manual Changes: N/A --- APAR #: IV40656 RTC defect : 92003 Description: After you install the interim fix TPAE_7500_IFIX.20130319-1630.psi.zip, all applications start a query when an application is accessed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41872 RTC defect : 89908 Description: In the Report application, when you do not close the viewer window and run a second report, you are taken back to the Start Center. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34509 RTC defect : 75656/13-10042 Description: In the Invoices application, when you reverse an invoice, the tax added to the invoice is not reversed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ75592 RTC defect : 90961/10-13788 Description: In the Inventory application, when you reorder a cron task and revise a purchase contract, the following error message is displayed: BMXAA3496E - TROUBLE PROCESSING ITEM. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27260 RTC defect : 77263 Description: When you attempt to log into Maximo, the following error message is occasionally displayed: BMXAA4189E - Not currently connected to aserver. Make sure the server is up and running. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41603 RTC defect : 90510 Description: Non-persistent fields in the Start Center cannot be filtered. Database Scripts: N/A Manual Changes: To remove filter fields for non-persistent attributes, add a new system property called "webclient.hideNonPersistPortletFilter" and set it's value to true. --- APAR #: IV39544 RTC defect: 93417 / 13-10446 Description: In the Email Listener application, when you send email attachments that have German umlauts or blank spaces, the attachments are not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR: IV24429 Issue: 62197 / 12-13817 Description: In the Migration Manager application, changes made to the user interface are not showing in the vent tracking but are showing up in the database. Database Scripts: N/A Manual Changes: N/A --- APAR: IV27220 Issue: 61271 / 12-14232 Description: In the Escalations application, escalation points migrate incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR: IV23018 Issue: 73544 / 12-13501 Description: After migration of the 7.2.1 environments to SCCD 7.5, some applications are not translated into German. Database Scripts: N/A Manual Changes: N/A --- APAR: IV39523 Issue: 87600 / 13-10438 Description: In the Bulletin Board application, the Date field is in a different format than the date specified by the DISPLAYDATE setting. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV43894 Issue(s): 94682 Description: In the Classifications application, when an attribute is deleted from specifications, the assetsspechist table for the affected asset does not get the Assetspechist.removedate field populated. Database Scripts: N/A Manual Changes: N/A --- APAR: IV42195 Issue(s): 90438 Description: In the Inventory Usage application, when a new usage is entered with a past, closed actual date, a warning message prompts and then does not allow you to complete the record. Database Scripts: N/A Manual Changes: N/A --- APAR: IV40258 Issue(s): 88096 Description: When a user logs in for the first time after they change their password, they are taken to the Start Center rather than their default application. Database Scripts: N/A Manual Changes: N/A --- APAR: IV40053 Issue(s): 87775 Description: In the Preventive Maintenance application, when you generate a work order from a job plan that does not have any work assets that are specified, the Change By and Change Date fields are not updated for the location that is specified by the job plan. Database Scripts: N/A Manual Changes: N/A --- APAR: IV44202 Issue:95079 Description: In the Assets application, you are unable to move an asset assembly to a location at a different site. Database Scripts:N/A --- APAR: IV38197 Issue: 83812 Description: In the Purchase Order application, when you cancel a PO revision the PR line is reusable and can be copied to another PO. Database Scripts:N/A --- APAR: IV38261 Issue: 90847 Description: When you duplicate a work order with its associated tasks, an error occurs. Database Scripts: HF7503_12.dbc --- APAR: IV31910 Issue: 75891 / 12-14570 Description: In the Scheduler application, when you attempt to use the Gantt view, an error occurs. Database Scripts: N/A --- APAR: IV43533 Issue: 94880 Description: In the Receiving application, when you receive a PO, the Cost Distribution field is selected from the first revision of the PO. Database Scripts: N/A --- APAR: IV43838 Issue: 95875 Description:CANNOT MAKE DESCRIPTION FIELD MANDATORY IN LABOUR REPORTING FOR INVOICE CREATION. Database Scripts: N/A --- APAR: IV41602 Issue: 89457 Description: When you use the Calendar lookup to select a date and the default language is set to Italian, the data in the Start Date field of a Work Order is incorrect. Database Scripts: HF7503_13.dbc --- APAR #: IV34568 RTC defect : 69743 Description: In the Calendar application, the daylight saving time start date causes problems on Date fields when no time information is entered. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV43818 RTC defect : 94158 Description: In the Reorder application, Maximo will not create a PO when you run a reorder for stored items if the Automatically Create Usage Documents For New Items flag is selected. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25586 RTC defect : 96820 Description: The launch entry URL for a product application is incorrect. Database Scripts: N/A Manual Changes : N/A -------- -------- =============================================================================================== End IF005 (TPAE_7503_IFIX.20130701-0736.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF006 (TPAE_7503_IFIX.20130723-1908.psi.zip) =============================================================================================== -------- -------- --- APAR #: IV24553 Defect(s): 87973 / 12-13818 Description: In the Invoices application, when an invoice and a PO have different values in the Currency field, the invoice cost must be converted to the PO currency. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40754 Issues(s): 88360 Description: In the Actions application, you cannot create an action with a Change Status type when you use the Maxinterror object. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38466 Issues(s): 82242 Description: In the Locations application, the value in the Location field displays incorrctly on the List tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43932 RTC defect : 94685 Description: In the Scheduler application, the resource requirements for PMs with a Job Plan sequence is doubled. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV44478 RTC defect : 95631 Description: In the Purchase Order application, PO lines cannot be deleted correctly when the user does not save the record before routing in workflow. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV32724 Issue(s): 92947 Description: In the Preventative Maintenance application, the Meter Data Import function does not generate a work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45470 RTC defect: 99246 Description: In the Invoices application, the value in the Financial Period field of a service transaction is populated information in the Enter Date field of the invoice header. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40438 RTC defect: 89477 Description: In Maximo Asset Manager 7.5.0.3, you cannot copy and paste text by dragging and dropping. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43867 RTC defect: 94724 Description: In the Work Order Tracking application, when the E-sig function is set up to change the status of a work order, the Electronic Signature Authentication dialog goes into an endless loop. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45158 RTC defect: 99422 Description: In the Purchase Requisitions application, after you select a value in the Advanced Search function, when you click on the Detail menu and select the Go To Purchase Contract option, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44896 RTC defect: 99758 Description: In the Receiving application, when you void a receipt on a revised PO, an error incorrectly occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45199 RTC defect: 100155 Description: Saved querries in the Assignment Manager application that have an Order By clause return incorrect values. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44918 RTC defect: 98378 Description: In the Classifictions application, when the Apply Down Hierarchy option is selected, the Use With Objects Details menu displays assets that were previously deleted in the parent classification. Database Scripts: N/A Manual Changes: N/A -------- -------- =============================================================================================== End IF006 (TPAE_7503_IFIX.20130723-1908.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF007 (TPAE_7503_IFIX.20130826-1418.psi.zip) =============================================================================================== -------- -------- --- APAR #: IV39590 Issues(s): 88061 Description: If you upload a quantity of 0 with the PO Upload file,it also uploads a unit costs that creates an incorrect calculation in the Line Cost field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39182 Defect(s): 85022 Description: When you assign labor that has an expired end date to a crew, the labor record is not released correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27224 RTC defect: 99199 Description: In the Inventory application, PO items are received in a bin where the BinNum in lowercase is added to another bin with the same BinNum in uppercase. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45167 RTC defect: 99847 Description: In the Purchase Order application, when the Inspection Required check box is selected, an incorrect GL Debit account is used when you receive an item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44809 RTC defect: 100515 Description: In the Purchase Requisitions application, when you change the status of a PR to approved, an error message is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26759 RTC defect: 99721 Description: In the Receipts application, when a PO line with a service type is received and receipts are completed, the PO is revised to adjust the unit cost. When the PO is approved and the receipt is voided, the unit cost that is used on the receipt is the new adjusted unit cost and not the original unit cost. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45387 RTC defect: 100632 Description: In the Inventory Usage application, the value in the Remark field is overwritten with the value in the Description field when you return items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41544 RTC defect: 99728 Description: In the Work Order Tracking application, when you clock on the Log tab, a performance issue is generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45929 RTC defect: 100598 Description: In the Inventory application, the Inventory Average Delivery Time data is not calculated correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41641 RTC defect: 93042 Description: In the Workflow Administration application, the Due Date field no longer populates the date after you upgrade to 7.5.0.3. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45361 RTC defect: 100126 Description: In the Workflow Administration application, you cannot start a new record via RMI in 7.5.0.3 with the same code you used in 7.1. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV42775 RTC defect: 95954 Description: When multiple sessions are opened for two different users from different groups, the permissions of the second user are applied to the first. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43134 RTC defect: 92766 Description: In the Service Items application, when you run an update for service items, both a Maximo Item interface and a Maximo Service Item interface prompt. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35291 (REWORK) RTC defect: 93099 Description: Table columns ignore the webclient.wrapreadonlycolumns option if it is set to false and the Select Records check box is selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43808 RTC defect: 93422 Description: KPI ARE NOT GETTING UPDATED AUTOMATICALLY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44018 RTC defect: 94661 Description: A Result Set Portlet class uses system.out.println. Database Scripts: N/A Manual Changes: To make Debug message displayed, please setup STARTCNTR as Logger. Steps: 1) Go to System Configuration->Platform Configuration->Logging 2) Find application Logger. Click New Row. Select STARTCNTR to Logger. Enter DEBUG to Log Level. Make sure it's Active. --- APAR #: IV43401 RTC defect: 102435 Description: In the Purchase Order Application, in the Advanced Search window, when you select a value for the Contract Reference field from the Lookup tool, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38004 RTC defect: 81499 Description: In the Map Manager (Spatial) application, the Map tab keeps refreshing the map and does not open it when SCCD 7.5 is installed with spatial. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46100 RTC defect: 103632 Description: In the Inventory application, when you reorder an item and select the Ignore Reorder Point option and clear the Run in Background option and then select run report, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38633 RTC defect: 93197 Description: In the Inventory application, when there is more than one vendor and the default vendor is changed, an error message occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46846 RTC defect: 102914 Description: In the Database Configuration application, when you create an escalation, the escalation fails because there is no required ID field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45941 Defect: 104342 Description: In the Security Groups application, when you enable export or import from application function, Maximo gives all security groups that have read access the export access and all groups that have save access the import access. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46511 RTC defect : 102945 Description: In the Work Order Tracking application, when you upload an invalid file type you are correctly prompted that it is an invalid file type, however the document is still uploaded to the document server and can be accessed directly. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV44525 RTC defect : 102591 Description: When you have 31 lines of data in the Start Center, the 31st line is correctly displayed on page 2 but when you open a ticket and change the status to resolved and then return to the Start Center, page 2 is still displayed with a result set of 31-30 of 30. Database Scripts: N/A set of 31-30 of 30. Database Scripts: N/A Manual Changes : N/A -------- -------- =============================================================================================== End IF007 (TPAE_7503_IFIX.20130826-1418.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF008 (TPAE_7503_IFIX.20130921-0829.psi.zip) =============================================================================================== -------- -------- --- APAR #: IV36773 RTC defect : 87481 Description: In the E-mail Interaction Setup application, you cannot send a plain text email with an XML payload. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV40119 RTC defect : 103507 Description: In the Publish Channels application, the Maximo Integration Framework interface returns integers for regular hours and premium pay hours. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV47186 RTC defect : 103807 Description: In the Asset Templates application, attributes ignore the sequence that is defined in the Classification field. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV40118 RTC Defect: 105185 Description: When you revise a PO that has a received quantity greater than the ordered quantity, a warning occurs and you cannot save the revision. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46861 RTC Defect: 103789 Description: The Manage Folder Signature Option displays as disabled when it is enabled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47069 RTC Defect: 104753 Description: A Start Center HTML portlet contains unnecessary HTML comments in the Title parameter. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47792 RTC Defect: 105538 Description: On the Failure Reporting tab of the Work Order Tracking application, when you delete a problem code entry and save the work order, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43913 Defect:94424 Description: When you modify a classification that has more than 3000 assets, the Asset Specification History object is not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36538 RTC Defect: 104165 Description: In the Inventory application, after Rotating Asset rows are added the follwoing error occurs: BMXAA1891E - The available balance will become negative as a result ofthis transaction. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46065 RTC Defect: 101554 Description: In the Work Order Tracking application, when you select the Go To Location option in the Location field and change the location, an error occurs when you return to the Work Order Tracking application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47397 RTC Defect: 104555 Description: In the Invoices application, when an adjustment the MATRECTRANS record is created, the CURRENCYLOADEDCOST attribute is calculated incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36367 RTC Defect: 74145 Description: The Document Link Name field and the Document Link Description field are absent from the Create File Attachment dialog box. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47914 RTC Defect: 105904 Description: In the Work Order Tracking application, the Select Planned Labor button displays all labor rather than labor that is planned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37968 RTC Defect: 82042 Description: In the Work Order Tracking (Everyplace) application, the Line Type field in the Actuals tab does not display any results in the drop-down box. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48139 RTC Defect: 107015 Description: In the Work Order application and the Quick Reporting application, the Negative Balance error report does not display the item number in question. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48005 RTC Defect: 107075 Description: In the Inventory application, the Auto Split dialog is displayed at incorrect times. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36859 Defect : 106874 Description: The Work Order Task status does not update properly when you receive materials in the Receipts application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44257 Defect : 105041 Description: When you select the Invoice Lines tab, performance is diminished. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45939 Defect : 101386 Description: In the Update DB Utility application, Update DB fails due to the hard coded object ID. Database Scripts: V7510_22.dbc, V7510_62.dbc, V7510_75.dbc, V7510_77.dbc Manual Changes: N/A --- APAR #: IV45460 RTC Defect: 100785 Description: In the Inventory application, when you set the inventory Cost type to FIFO and return items, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47586 Defect : 105193 Description: The Jobplan Hierarchy report incorrectly displays the same header on every page. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33509 Defect(s): 107347 Description: After you migrate classifications, changes to parent attributes are not reflected on child classifications. Database Scripts: N/A Manual Changes: N/A -------- -------- =============================================================================================== End IF008 (TPAE_7503_IFIX.20130921-0829.psi.zip) =============================================================================================== -------- -------- =============================================================================================== Begin IF009 (zzz.psi.zip) Next =============================================================================================== -------- -------- --- --- APAR #: IV39087 RTC Defect: 85204 Description: In the Conditional Expression Manager application, when columns have conditions, filter fields in tables are not aligned correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46747 RTC Defect: 104301 Description: In the Work Order Tracking (T&D) application, when you use the Enter Time by Crew option and refresh the dialog, work orders are listed with no start times displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV33515 Defect(s): 66317 Description: Historical values for all changed asset attributes are not downloaded. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46714 Defect(s): 102728 Description: Cannot get user defined field to be editible when status is paid. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38540 Defect(s): 105192 Description: ESCALATION TASK TAKING UP EXCESSIVE DATABASE CONNECTIONS AND SHUTTING DOWN THE ENVIRONMENT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47667 Defect(s): 105788 Description: Problem loading the portlet, error displays in the result set portlet. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47744 Defect(s): 107144 Description: Maximo UI server hanging due to thread deadlock. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47870 Defect(s): 105972 Description: Only one child classification is shown in the Classification tree if parent classification has multiple child classifications in different sites Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49802 Defect(s): 108158 Description: Able to create requisition for obsolete items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50170 Defect(s): 109601 Description: Calendar allows update with read only set. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV03343 Defect(s): 102008 Description: MULTIPART TEXTBOX PROPERTIES MAXIMO 7.5 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47600 Defect(s): 104956 Description: In Asset application, specification data wiped clear with keyboard 'next page' shortcut. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV24093 Defect(s): 98815 Description: The copy PO lines function is bringing in the cancelled revisions PO lines and it should not. It should only return lines from valid revisions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37712 Defect: 110229 Description: PURCHASE CONTRACT - REORDER IGNORING PURCHASE CONTRACT LINE STATUS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47488 Defect: 108583 Description: The value is suddenly moved to another row unexpectedly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45377 Defect: 104849 Description: A formatted HTML only email is failing to update an incident record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47173 Defect: 103833 Description: Job Plan Number on Assignment Manager displays no Value Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46749 Defect: 104298 Description: ALL LABOR COPIED TO WRONG WORK ORDER IN "ENTER TIME BY CREW". Database Scripts: HF7510_01.dbc Manual Changes: N/A --- APAR #: IV46077 Defect: 110961 Description: DOUBLE BYTES CHARACTERS IN THE COLUMN ARE SUDDENLY DELETED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50775 Defect: 111178 Description: ERROR WHEN ADDING STANDARD SERVICE LINE TO INVOICE REFERENCING A PURCHASE CONTRACT. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34502 Defect: 105844 Description: DUPLICATE RESERVATION LINE APPEARS WHEN CHANGING PM WO'S STATUS TO APPR. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45864 RTC defect : 105137 Description: SCHEDULER 7.5.1 IFIX - THE SCHEDULER DOES NOT RETRIEVE ALL OF THE WORK ORDERS IT SHOULD RETRIEVE Database Scripts: Manual Changes: N/A --- APAR #: IV23506 RTC defect : 100092 Description: Gain privileges. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46277 Defect: 111848 Description: In the Inventory application, storeroom security is being ignored for physical count adjustment. Also, unauthorized users are able to modify reorder points. Database Scripts: N/A Manual Changes: N/A --- APAR #: n/a Defect: 96739 Description: Dialogs are being stretched horizontally to fit dialog help text, rather than the text wrapping Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46511 Defect: 104378 Description: INVALID FILE TYPE DOCUMENTS ARE STILL UPLOADED TO THE DOCUMENT SERVER. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51061 Defect: 111397 Description: MIF LOADING OF GL COMPONENTS SLOW PERFORMANCE IN MAXCOAPROCESS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV42621 Defect: 110373 Description: Embedded code that forces the product to run a query that is notwritten efficiently. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51185 Defect: 111774 Description: BMXAA7691E/BMXAA0272E ERRORS WHEN ISSUING ASSET IN INVENTORY. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35291 Defect: 78885 Description: TABLE COLUMNS IGNORE WEBCLIENT.WRAPREADONLYCOLUMNS = FALSE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV19935 Defect: 93983 Description: No prompt for user to enter charge details when issuing items Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47647 Defect: 105039 Description: SLAS CAUSING DB OPEN CONNECTIONS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36105 Defect: 73961 Description: CAN NOT CREATE A NEW SOFTWARE ITEM Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47343 Defect: 105015 Description: INCORRECT LABOR WORK ORDER COSTS WHEN REPORTING OUTSIDE LABOR Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44907 Defect: 111376 Description: Security Warning Msg box pops up Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51418 Defect: 112906 Description: Colors are not changing in Gantt View, for Scheduler (Added ability to Change colors using Maximo System Properties) See the configuration document https://www.ibm.com/developerworks/community/groups/service/html/communityview?communityUuid=a9ba1efe-b731-4317-9724-a181d6155e3a#fullpageWidgetId=W5f281fe58c09_49c7_9fa4_e094f86b7e98&file=8536775c-9726-4f47-9567-a8f86c81ac88 for details on how to configure properties Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48117 Defect: 112907 Description: CREATING PR FROM DESKTOP REQUISITION THE PRLINES ARE CREATED INREVERSE ORDER. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51531 Defect: 113897 Description: PO REVISION ISSUE WHEN THERE IS NO DEFAULT VALUE FOR PONUM. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51513 Defect: 113282 Description: IN ITEM MASTER APP, USERS CHOOSE AN ITEM AS NS IN ITEM/ORG DETAILS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49268 Defect: 114093 Description: Cross Site Scripting vulnerability. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39184 RTC defect: 100113 Description: Security vulnerability: reorder the appending of report where clauses Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52086 RTC defect: 115455 Description: EXTRA EMPTY SPACE BETWEEN LINES OF TEXT IN RTE FIELD Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45691 RTC defect: 111834 Description: PREVIEW REPORT SCHEDULE DATE IS WRONGLY DISPLAYED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52287 RTC defect: 115715 Description: INVENTORY_TRANSACTIONS_ISSUES_RETURNS.RPTDESIGN FAILS WHEN RUNBY NON-ADMIN USER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49077 RTC defect: 115037 Description: ASSET DOWNTIME CALCULATING INCORRECTLY WHEN ENTERED THROUGH WORKORDERS TRACKING Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51523 RTC defect: 113642 Description: Maximo is not checking for user-entered invalid decimal separators. If a user with a Locale of DE enters the value 12.34, that is, mistakenly enters a dot/point/period as the decimal separator (which would be correct for Locale EN) and client-side validation is not enabled, no error is thrown and the value is parsed into 1234, that is, "one thousand two hundred and thirty-four" instead of the intended "twelve and 34 100ths". This affects attributes configured as 'DECIMAL','FLOAT' and 'AMOUNT'. If client-side validation is enabled (mxe.webclient.ClientDataValidation = 1), the correct exception is raised. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51114 RTC defect: 115936 Description: AS A RESULT OF A SECURITY CHANGE IN JAVA 1.7_45, THE SCHEDULER/GRAPHICAL ASSIGNMENT, AND DISPATCHER APPLET don't work due to a TimeZone error. Database Scripts: N/A Manual Changes: Clear Java Applet Caches --- APAR #: IV39544 RTC defect: 93997 Description: Incoming email attachments with non-ASCII filenames are not handled by the E-mail Listener. Database Scripts: N/A Manual Changes: Add mail.mime.decodetext.strict = false via System Properties app. --- APAR #: IV49672 RTC defect: 116216 Description: MAXIMO SCHEDULER POOR PERFORMANCE Database Scripts: HF7510_03.dbc Manual Changes: N/A --- APAR #: IV44280 Defect: 116876 Description: DATE RETRIEVAL INTO THE GRAPHICAL ASSIGNMENT MANAGER/SCHEDULER TAKES A LONG TIME WHEN THERE ARE MILLIONS OF WORK ORDERS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52268 Defect: 115563 Description: Invoice application copy po lines button service line order unit not carrying over to invoice line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV17390 Defect: 113016 Description: Filtered contract line items status do not change when status changed for record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51794 Defect: 114306 Description: New images for the ui skin are in date specific folders. Database Scripts: N/A Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add or modify the following filter-mapping section: HttpMaxAgeFilter /webclient/skins/* 3) Save file. 4) Build and redeploy ear file. --- APAR #: IV53277 Defect: 117730 Description: CREATE NEW SERVICE ADDRESS RECORD WITHOUT ACCESS TO SERVICEADDRESS APPLICATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36169 Defect: 117751 Description: "BMXAA1758E - THIS ITEM IS NOT ON THE LINE" - WHEN ISSUING ITEMSTO DESKTOP REQUISITION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52048 Defect: 117520 Description: Focus field is not set when adding first row to a table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53221 Defect: 117652 Description: JAVA WARNINGS IN APPLICATIONS(ASSETS, WFDESIGNER ETC..) WHEN JAVA 1.7 UPDATE 45 APPLIED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53644 Defect: 118670 Description: Unable to close advanced search dialog box in labor reporting. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53310 Defect: 117959 Description: When a default value is set for a cloned application in Application Designer, the value is not used on INSERT of a new record when the field is READONLY due to business rules for a new record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40118 (rework) RTC Defect: 105185 Description: When you revise a PO that has a received quantity greater than the ordered quantity, a warning occurs and you cannot save the revision. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52977 RTC Defect: 117375 Description: Master PM (TR) not updating associate PM's lead time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54023 RTC Defect: 119990 Description: PERFORMANCE ISSUE IN GRAPHICAL ASSIGNMENT WHILE SAVING WORK LIST QUERY OR OPENING GANTT VIEW. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53346 RTC Defect: 118087 Description: UNABLE TO RIGHT CLICK ON ANY SELECTED FIELD OR CONTROL TODISPLAY CONTROL PROPERTIES DIALOG WITHIN APPLICATION DESIGNER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51782 RTC Defect: 114276 Description: Radio button group doesn't inherit a value of domain Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52851 RTC Defect: 117153 Description: NOT ABLE TO RECEIVE SERVICES WITH NEGATIVE QUANTITY FROM MIF (INTEGRATION) Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53952 RTC Defect: 119938 Description: Attribute Restriction does not work when the restriction is added to a second security group associated with the same user. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53870 RTC Defect: 119627 Description: When the eSig Action is enabled for Work Order Tracking/Assign to New Parent, the application hangs on usage. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53507 RTC Defect: 118308 Description: ENTERBY field is wrong on the MATUSETRANS record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44127 Defect: 122399 Description: When you import meter readings with the MXMETERDATA object structure in integration, work orders are generated before the PM frequency is reached. This issue only occurs when the reading type is ACTUAL. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52583 Defect: 116378 Description: Rich text editor font size not sticking after hitting enter. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54349 Defect: 121659 Description: Asset information is not copied to INVUSELINE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54856 Defect: 122635 Description: Session timer is not reset when inside rich text editor. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55553 Defect: 123772 Description: When duplicating route, route_stops description is left with previous value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54394 Defect: 124385 Description: AFTER ENTERING TEXT IN A RICH TEXT FIELD NEED TO CLICK TABS TWICE BEFORE THEY RESPOND Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55067 Defect: 123338 Description: When you click on Cancel button the Detail Menu is showed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46701 Defect: 124834 Description: PM WORK ORDER GENERATION INCORRECTLY REQUIRES RIGHTS TO WORK ORDER TRACKING APPLICATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51067 Defect: 124164 Description: "BMXAA4211E - DATABASE ERROR NUMBER 515" WHILE TRYING TO ADJUSTTHE CURRENT BALANCE OF A LIFO/FIFO ITEM. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55904 Defect: 124688 Description: EXCHANGE RATE DOESN'T GET CACULATED WHEN RFQ IS DUPLICATED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52592 Defect: 116148 Description: BMXAA4196E ERROR WHEN CREATING A CONTRACT FOR A CONDITIONAL ITEM FROM RFQ. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55964 Defect: 125098 Description: View Asset Move History no display of records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37134 Defect: 124642 Description: THE DEFAULTVALUE CHANGES FROM 0,00 TO 0.0 INSIDE THE MIGRATION MANAGER PACKAGE CREATED HENCE IT FAILS IN TARGET Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51844 Defect: 114845 Description: PR lines populate with contract reference on non-contract services. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56032 Defect: 125221 Description: CHILD WORK ORDER STATUS CHANGE ISSUE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53928 Defect: 120879 Description: Item description not added to matrectrans table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52840 Defect: 125227 Description: UNABLE TO DELETE ATTRIBUTE OF A TOP CLASSIFICATION IF "APPLYDOWN HIERARCHY"=1 AND CHILD CLASSIFICATION IS ADDED TO AN ASSET. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56185 Defect: 125861 Description: GETTING ERROR - BMXAA2022E - COMPANY ON INVOICE MUST BE SAME AS THE COMPANY PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40118 (rework) Defect: 105185 Description: When you revise a PO that has a received quantity greater than the ordered quantity, a warning occurs and you cannot save the revision. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53772 Defect: 124520 Description: Automatic inventory reorder crontask does not notify about items with order unit missing. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54969 Defect(s): 123647 Description: When item is transferred between stores in different organizations, MAXIMO creates multiple rows in the Inventory InvLifoFifoCost table of the From Store when only one row should be created. Performing a Current Balance Adjustment also adds an extra InvLifoFifoCost record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56535 Defect: 126568 Description: THE SYSTEM HANGS WHEN TRYING TO CHANGE STATUS AND A JAVA ERRORIS SHOWN IN THE JAVA CONSOLE (SCHEDULER 7510) Database Scripts: N/A Manual Changes: N/A --- APAR #:IV57374 Defect: 127952 Description: TOTAL COST OF PURCHASE REQUISITION IS SET TO NEGATIVE WHEN YOU DELETE A PR LINE FROM A PR. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53363 Defect: 118103 Description: Error message/issue to field is required for transfer of tool to another storeroom. Database Scripts: N/A Manual Changes: N/A --- APAR: IV03708 Issue: 124956 Description: In the Receiving application, the To Lot field does not populate when you receive items with a specified lot. Database Scripts:N/A Manual Changes: N/A --- APAR: IV57447 Issue: 128578 Description: INVENTORY AVERAGE COST MISCALCULATION - don't check for a same bin / lot if inventory cost is set to average cost. Database Scripts:N/A Manual Changes: N/A --- APAR: IV58435 Issue: 129144 Description: Inventory usage not identifying unique po site/org. Database Scripts:N/A Manual Changes: N/A --- APAR: Issue: 129482 Description: Filtering multiple times causes performance problem on Gantt View Java applet in Scheduler application. Database Scripts:N/A Manual Changes: N/A --- APAR #: IV31300 Issue(s): 129840 Description: When canceling a work order that has a job plan and a PM, the job plan on the PM is reset to the job plan that was added on the work order even if the job plan is not on the PM. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV56874 Issue(s): 129991 Description: WHEN SR CREATED FROM LOCATION WITH A GL ACCOUNT DIFFERENT THAN IT'S ASSET , SR GETS CREATED WITHOUT ASSET OR LOCATION. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV54056 Issue(s): 124201 Description: When the duration field is populated on a work order the laborhours are not calculated properly Database Scripts: N/A Manual Changes : N/A --- APAR #: IV57104 Issue(s): 130557 Description: WEBCLIENT.WRAPLENGTH SYSTEM PROPERTY IS INEFFECTIVE Database Scripts: N/A Manual Changes : N/A --- APAR #: IV56824 Issue(s): 130494 Description: Last meter reading on a location meter is not getting updated when a measurement value is entered against the location meter's measure point (as defined in the Condition Monitoring application) in the Work Order Tracking application on a work order task if the task has both an asset and a location and the measure point is valid for the location. It cannot be valid for both the asset and location. The presence of the asset on the task should not affect the update of the location meter's last reading value through the location meter's measure point. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV57390 Defect(s): 130512 Description: Inspector value does not get applied to the meaurement and meter when measures are entered on tasks in the Actuals or Plans tab of the Work Order Tracking application and the Inspector value is set after the measurement (for GAUGE meters) or observation (for CHARACTERISTIC meters). Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54922 RTC Defect: 123017 Description: DATASHEETS ARE NOT BEING ATTACHED TO THE WORKORDER WHEN A CAL ASSET AND CAL JP IS ATTACHED TO A WO Database Scripts: N/A Manual Changes: N/A --- APAR: IV41602 RTC Defect: 125520 Description: INVALID DATE FORMAT WHEN SELECTING A DATE USING CALENDAR LOOKUP IN MAXIMO FOR ITALIAN LANGUAGE SETUP. Database Scripts: HF7503_17.dbc --- APAR: IV59298 RTC Defect: 130772 Description: ISSUE RELATED TO METERREADING RECORDS CREATED THROUGH THE FLEETUSAGE LOAD (CM) APPLICATION. Database Scripts: N/A --- APAR #: IV59061 Defect(s): 130382 Description: When new PO lines are added to a PNDREV revised PO that was created from a previously completely received PO, PO Receipts is not updated from COMPLETE to PARTIAL if the default POLine Quantity (POLINE.ORDERQTY) is left unchanged from the system-defaulted value of 1 on the new PO lines. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV38568 Defect(s): 83384 Description: STORAGE PARTITION FIELD IN DATABASE CONFIGURATION APPLICATIONGETS CLEARED AFTER THE CONFIGURATION CHANGES ARE APPLIED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV23789 Defect(s): 128968 Description: Inventory current balance calculated wrongly after issuing item. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131271 Description: Perf - Multiple executions of update skdactivity SQL Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131269 Description: Perf - Overlapping predicates in a delete SQL which bring unstable performance Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131270 Description: Perf - performance for Populating the shift / break in graphical assignment Database Scripts: N/A Manual Changes: N/A APAR #: Defect(s): 130316 Description: Perf - FetchWorkPeriodData doesn't filter data as what displayed- GAM only Database Scripts: N/A Manual Changes : N/A --- --- APAR #: IV59358 Issues(s): defect 131140 Description: AUTHORIZE SITE IS EDITABLE FOR READONLY USER. Database Scripts: N/A Manual Changes: 1) Open the Lease Contracts application's presentation in Application Designer. 2) Export the Lease Contracts application to contlease.xml. Save this export in a location where you can edit it. 3) Open the just-saved contlease.xml in a text editor. 4) Replace with 5) Save these changes. 6) Import the modified contlease.xml. repeat the same steps for Master Contracts (contmaster.xml) replace with Purchase Contracts (contpurch.xml) replace with Software Contracts (contsfw.xml) replace with Warranty Contracts (contwarrty.xml) replace with --- APAR #: IV50251 Defect(s): 109375 Description: THE ASSET APPLICATION ALLOWS YOU TO CHANGE STATUS ON A RECORD EVEN IF THE NOSTATUS WORKFLOW ACTION IS ACTIVE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59612 Defect: 131585 Description: Need a way not to set the Modified column in SKDActivity. Database Scripts: HF7510_04.dbc Manual Changes: N/A --- APAR #: IV21575 Defect(s): 129395 Description: UNABLE TO RE-ROUTE A WORKFLOW FROM INBOX ASSIGNMENTS BMXAA4407E - A NESTED EXCEPTION. ERROR OCCURS Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131665 Description: Improve save and commit performance in Scheduler application. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131755 Description: Commit call getModel twice which bring bad performance. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131199 Description: Scheduler/GA UI Performance fixes Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131926 Description: Perf - Cached groupdatainfo for all scheduler apps and cache wombomap for GAM Database Scripts: N/A Manual Changes : N/A --- APAR #: Defect(s): 131939 Description: Perf - No need to save when user clicks cancel on change status dialog in Scheduler and Graphical Assignment applications. Database Scripts: N/A Manual Changes : 1) Export the scheduler.xml using Application Designer. Save this export in a location where you can edit it. 2) Open the just-saved scheduler.xml in a text editor. 3) Search for - replace with 5) Search for - replace with 7) Search for - replace with 9) Save the modifications and import the modified scheduler.xml. 10) Export the grpassign.xml using Application Designer. Save this export in a location where you can edit it. 11) Open the just-saved grpassign.xml in a text editor. 12) Search for - replace with 14) At the end of the line remove savemode="ONUNLOAD" replace with 15) At the end of the line remove savemode="ONUNLOAD" replace with 16) Save the modifications and import the modified grpassign.xml. --- APAR #: Defect(s): 131794 Description: Perf - Return from wotrack applink is slow. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV51577 RTC Defect: 131943 Description: Perf -In the Graphical Assignment application, when you run an SQL query, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131949 Description: Perf - Cache model to improve performance of applink in Scheduler application. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV32829 RTC Defect: 110863 Description: COMPLETE WORKFLOW ASSIGNMENT DIALOG RESET Database Scripts: N/A Manual Changes: 1) Export the library.xml using Export System XML in Application Designer. Save this export in a location where you can edit it. 3) Open the just saved library.xml in a text editor. 4)Search for - 7) Import the modified library.xml. --- APAR #: Defect(s): 132552 Description: Getting Null Pointer exception when select multiple activity records for an right click action(Scheduler). Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59914 Defect(s): 132493 Description: CONTRACT REVISION BETWEEN PR HEADER AND PRLINES. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59026 Defect(s): 131049 Description: SLOWNESS LOADING JOB PLAN LIST FROM THE JP LOOKUP ON WORK ORDERTRACKING. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59387 Defect(s): 133556 Description: Internet Explorer 8 crashes entering a long description. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV60086 Defect(s): 133662 Description: Base Services 7503 IFIX SAVING A SIMPLE SCHEDULE IS EXTREMELY SLOW. Database Scripts: HF7510_05.dbc Manual Changes : N/A --- APAR #: Defect(s): 134404 Description: Perf - Cache Resource data ( craft and tool ) for better performance. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59006 Defect(s): 132073 Description: WHEN REORDERING, ORDER QUANTITY SHOULD BE 3, BUT CURRENT ORDER QUANTITY IS 4. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV50642 Defect: 135536 Description: In the Work Order tracking application, you cannot add items to the plans tab when the status of those items is set to PENDOBS in both inventory and the item master. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Defect: 135976 Description: Perf - Create index to improve save performance in Scheduler. Database Scripts: HF7510_06.dbc Manual Changes: N/A --- APAR #: IV51076 Defect: 135749 Description: Focus returns to the "Filter" label on all applications after returning to the Application List Tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60512 Defect: 135380 Description: HARD RESERVATION CRON ERRORS OUT WITH OPEN CURSORS EXCEPTION AFTER PROCESSING 10000-12000 RESERVATIONS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55678 Defect: 124149 Description: The move/modify swap does not work when using the this is replacement feature. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60767 Defect: 134860 Description: Incorrect quantity conversion on the consignment invoice. Database Scripts: N/A Manual Changes: N/A --- Apar #: IV51858 Defect(s): 136201 Description: "CLOSE PO?" option on an invoice approval does not close the PO associated to the invoice. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61400 Defect(s): 136570 Description: Refresh does not happen when re-opening gantt chart after saving assignments in Graphical Assignment. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61207 Defect(s): 136484 Description: Cancel button does not work when transferring items from a storeroom to another. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53173 Defect(s): 135979 Description: BMXAA8229W - RECORD RFQLINE ERROR IN RFQ APPLICATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55983 Defect(s): 132214 Description: In inventory application, cannot change item status to obsolete if item is referred in revised purchase order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34131 Defect(s): 136710 Description: When clicking on a table cell in a different row, the cursor unexpectdly switches focus to a different cell. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV36848 Issues: 136903 Description: RECEIVED SERVICE QTY EXCEEDS THE ORDERED QTY ROUNDING PROBLEM Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45731 Issues: 137432 Description: Unable to update Start Center KPI graph. Works with base language but not other languages. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46577 Defect: 134155 Description: Unable to select a predecessor task on a jobplan task when there is an attached document on the job plan. The following error is encountered: BMXAA4187E - "The relationship DOCLINKS does not exist for business object JPTASKLOOKUP. Verify that the relationship specified in parameter DOCLINKS exists in the Maxrelationship table." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV26877 Defect: 138010 Description: The total quantity received for all receipts in the 'Select Ordered Items' dialog does not include the quantities that are filtered in the Receipts table window when the dialog is launched. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61515 Defect: 137565 Description: PURCHVIEW.EXCHANGERATE IS NOT UPDATED WHEN CURRENCY IS CHANGED IN PURCHASE CONTRACTS APPLICATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61882 Defect: 138594 Description: PO NOT CLOSED AUTOMATICALLY. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61996 Defect: 138887 Description: When trying to approve a Purchasing Requisition, an error is thrown: "BMXAA0024E The action Location GARAGE Site BEDFORD is not allowed object Line 1. Verify the business rules for the object and define the appropriate action for the object." Approval of PRs with inventory-related storeroom locations on PR lines causes this error even if the location has been populated from the 'Charge To' work order or asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40217 Defect: 138695 Description: "TOBIN" does not populate in inventory usage application when transferring to another storeroom. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61743 Defect: 138667 Description: SCHEDULER NOW REQUIRES A DISCARD CHANGES AND REFRESH TO SEE CHANGES MADE BY GOING TO WOTRACK. Database Scripts: N/A Manual Changes: N/A --- APAR: IV51413 RTC Defect: 138174 Description: PO WITH IDENTICAL PONUM PRESENT IN 2 SITES, THE ATTACHMENTS AREDISPLAYED AND ACCESSED REGARDLESS OF THE SITE. Database Scripts: HF7503_18.dbc --- APAR #: IV50149 Defect: 109517 Description: Hourly rate for crew types is calculated as the average hourly rate instead of the sum hourly rates. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV59604 Defect(s): 140295 Description: Upload file event needs to support longop dialog. Database Scripts: N/A Manual Changes: The long operation dialog will activate on the uploadfile control by changing the event from "loadData" to "dolongop". --- APAR #: IV52304 Defect(s): 140939 Description: AN UNKNOWN ERROR HAS OCCURRED" WHEN CHANGING STATUS OF WO TASKS WITH PREDECESSORS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56800 Defect(s): 128696 Description: PRORATED COST ISSUE WITH REVISING PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56375 Defect(s): 128574 Description: Application import dialog gets hung. Database Scripts: N/A Manual Changes: To avoid application import hang, activate long operation dialog on the uploadfile control by changing the event from "loadData" to "dolongop". 1) In Application Designer, select Action Export System XML. 2) Export LIBRARY to library.xml. 3) Edit library.xml with text editor. 4) Locate uploadfile control inside dialog "ifimport". 5) Modify event from "loadData" to "dolongop". 6) Save changes to library.xml. 7) In Application Designer, use Import Application Definition toolbar button to import library.xml. --- APAR #: IV55744 Defect(s): 142724 Description: Placing cursor on read-only multiline field selects all the text and scrolls to the bottom. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59627 Defect(s): 131341 Description: READ ACCESS FOR SECURITY/APPLICATION, CONDITION SHOULD BE READ ONLY. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56533 Defect(s): 144175 Description: Download function generates file xls with empty value of field "value". Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57420 Defect(s): 144643 Description: Base Services- 7503-IFIX- LANGUAGE ISSUE QUERY ON LIST TAB CAUSING ERROR BMXAA421E - DATABASE ERROR 904 OCCURRED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52747 Defect(s): 144721 Description: The image thumbnail does not update when there is a double quotation in the description. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63749 Defect(s): 144954 Description: JOBPLAN's CREWID is not carried to WORKORDER's CREWID through PM wogen. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63834 Defect(s): 145288 Description: Precautions are getting saved without Can Have Precautions checked. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62877 Defect(s): 141980 Description: Javascript error when attempting to select any query based reporting. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63433 Defect(s): 144335 Description: Column value is not processed properly if value is &USERNAME& Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64069 Defect(s): 146167 Description: Application import dialog is not closed after IV56375. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61505 Defect: 137108 Description: 'Life to Date for Asset' and other cumulative ASSETMETER values (SINCELASTREPAIR,SINCELASTOVERHAUL,SINCELASTINSPECT,SINCEINSTALL,LIFETODATE) become 0.00 (zero) after entering meter readings on an asset that was moved from another site. This leads to incorrect and sometimes negative ASSETMETER.AVERAGE values. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54134 Defect: 141553 Description: REPORT PARAMETERS VALUES IN FINNISH CHARACTERS ARE PASSED ON TO REPORT AS QUESTION MARKS IN 7.5.0.3 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64672 Defect: 147049 Description: Inbound Integration Transaction errors when Header user is null and Propogateuser is set to true Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53308 Defect: 148489 Description: Dates beyond year 2050 selected from date picker widget are saved incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV34370 Defect(s): 147608 Description:ATTRIBUTE OF TYPE GL ENDS UP BEING WRONG LENGTH. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV21637 Defect(s): 149446 Description: TRANSLATED MAXMESSAGES (SYSTEM MESSAGES) NOT DISPLAYING PROPERLY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60128 Defect(s): 133687 Description: System allowed to select value even if the lookup field is readonly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65490 Defect(s): 150325 Description: PM ESTIMATED DATE WILL BE CHANGED TO BLANK AFTER FORECAST IS CREATED , IN FREQUENCY TAB Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56663 Defect(s): 150176 Description: WHEN ASSOCIATING ADDRESSES TO SITES IN ORGANIZATION APPLICATIONENTRY IS MOVING TO NEXT PAGE WHEN IT SHOULD NOT BE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65533 Defect(s): 151824 Description: INCORRECT CONVERSION FACTOR USED ON PO LINE OF CLONED PO APPLICATION WHEN DEFAULT STOREROOM USED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54492 Defect(s): 134176 Description: Work order status remains WMATL even after canceling material reservation and womaterialstatusupdatecrontask runs Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64640 Defect(s): 147375 Description: WHEN YOU SPECIFY A CONTRACT LIMIT OF 0, MAXIMO ALLOWS TO CREATEPURCHASE CONTRACT WITH AN UNLIMITED VALUE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65389 Defect(s): 151830 Description: PM FORECASTING ISSUE - PM NEXT DATE FIELD GOES BLANK Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50353 Defect(s): 155655 Description: INBOUND DECIMAL VALUES ARE ROUNDED ON ASSET AND LOCATION NUMERICVALUE SPECIFICATIONS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62271 Issues(s): 155951 Description: DELETING SERVICE ADDRESS FIELD,RELATED FIELDS REMAIN POPULATED,DESCRIPTION, STREET ADDRESS,CITY, STATE/PROVINCE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64488 Defect: 155658 Description: INVOCATION CHANNEL GETS "BMXAA1481E CANNOT DELIVER THE MESSAGE TO THE ENDPOINT" Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27275 Defect: Same as IV64488 - duplicate apar Description: INVOCATION CHANNEL GETS "BMXAA1481E CANNOT DELIVER THE MESSAGE TO THE ENDPOINT" Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51665 Defect: 154302 Description: WHEN KPI CRON RUNS MORE THAN ONCE A DAY THE TREND GRAPH DAYS DO NOT ALIGN WITH THE COLLECTED POINTS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66256 Defect: 156999 Description: USER CANNOT CHANGE THE QBR DESCRIPTION/TITLE WHILE EDITING IF THE REPORT DOES NOT USE A ROS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47577 RTC defect: 160479 Description: MIGRATION MANAGER DATABASE COMPARISON FAILS WITH A JAVA.SQL.SQLE EXHAUSTED RESULTSET Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58162 RTC defect: 160477 Description: Migration manager code not recognizing duplicate records and trying to add them to collection after compare Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54557 RTC defect: 161285 Description: BS 7503 IFIX APAR: IV54557 'BMXAA4024E - THE SYNONYM VALUE GROUP IS NOT VALID FOR THEDOMAIN ACTIONTYPE.' Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44530 RTC defect: 156799 Description: Cannot get SCCD into Maintenance Mode Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66607 RTC defect: 154388 Description: LOCATIONS.LOCPRIORITY VALUE DISAPPEARS WHEN YOU CHANGE TYPE FROM NON-OPERATING TO OPERATING LOCATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66517 RTC defect: 154194 Description: Invuseline.actualdate is copied to all the inventory.lastissuedate line items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52906 RTC defect: 165549 Description: CONTRACT FIELDS NOT CLEARING WHEN RETURNING FROM CONTRACT TO PR AND PO APPLICATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68157 RTC defect: 158135 Description: ASSOCIATING MASTER PM TO A LOCATION, THAT HAS ANOTHER LOCATION WITH SAME NAME IN ANOTHER SITE IS NOT BEHAVING CORRECTLY Database Scripts: Run the Database script HF7503_19.dbc Manual Changes: N/A --- APAR #: IV26056/IV29573 Defect: 163389 Description: ITEM STATUS CANNOT CHANGE TO OBSOLETE WHEN OPENPR OR PO EXISTS FOR THE ITEM IN A DIFFERENT STOREROOM . Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68523 RTC defect: 160209 Description: TRAILING/LEADING SPACES IN LOCATION ID CAUSE ERROR ASSOCIATINGSYSTEMS WITH LOCATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67420 Issue(s): 156326 Description: PM Projected Labor report doesn't work with any # of weeks. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63066 Issue(s): 168227 Description: PO lines with 'inspection required' mark double the ordered upon inspection. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66393 Issue(s): 167925 Description: Attaching a deep nested job plan to a workorder takes a long time and crashes the server Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71432 Issue(s): 167857 Description: Material Receipts entry is created with Line Cost 500 as RECEIPT and -501 as VOIDRECEIPT- APAR IV71432 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62317 Issue(s): 171983 Description: Purchase Order is not closed if Invoice is voided and then full transaction is completed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71912 Issue(s): 170562 Description: Purchase Order is not closed if Invoice is reversed and then full transaction is completed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62253 Defect: 171841 Description: Cannot save contract after change the type - BMXAA4214E - An unknown error has occurred. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73512 Defect: 176056 Description: SLOW QUERY ON REPAIR FACILITY WHEN INSERTING A NEW LOCATION RECORD Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59297 Issue(s): 175403 Description: In the Inventory Usage application, the Line Cost Calculation for returned transactions is not correct. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68983 Issue(s): 172962 Description: The Domain lookup for the Specifications attribute does not display domain values properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65681 Defect: 177656 Description: View/Manage Query box not showing unless All Sites flag is checked in Security Groups. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV42938 Defect: 179681 Description: CAN'T DELETE POLINE AFTER VOID THE RECEIPT Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69211 Defect: 181621 Description: Reports fail when including a long description with < or > when rich text is disabled Database Scripts: N/A Manual Changes: N/A --- APAR #: IV37972 Issues(s): 182676 Description: During PMWOgen, some queries may leave cursors open which prevent the process from completing. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54640 Defect: 182678 Description: CURSORS NOT RELEASED WHEN RUNNING PMWOGEN CRON TASK Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73624 Defect: 176622 Description: BUTTONGROUP ALIGN CONTROL ATTRIBUTE NOT APPLYING ON DIALOGS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68532 Defect: 184215 Description: When you approve an invoice that is connected to a work order that has a purchase order line that references a different site, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63425 Defect: 180774 Description: Use multiple outbound queues get dups Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69138 Defect: 187436 Description: STAGED QUANTITIES ARE NOT INCLUDED IN THE INVENTORY AVERAGE COST. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV75504 Defect: 185461 Description: ISSUE WITH CONVERSION FACTOR IN PURCHASE ORDER APPLICATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV77537 Defect: 194266 Description: In the PO application when using the 'Copy PR Lines to PO' dialog on a CONSIGNMENT PO, the error "BMXAA8138E - Only consignment items can be selected for this purchase order. Use the Inventory application to specify consignment items in inventory." is encountered but the lines are copied to the PO anyway. If all PR lines were selected for copy to the PO, the PR status is also changed to CLOSED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74039 Defect: 203080 Description: Direct print with attachments attachment not printed if previous Microsoft document attachment takes too long to print. Database Scripts: N/A Manual Changes: 1 Create a new property in System Properties named: mxe.directprint.waitAfterMsDoc 2 Set the value of the property to the number of milliseconds you would like to wait after a Microsoft document print is requested. For instance, a value of 30000 would be 30 seconds. ==================================================================================================== V. Notices ==================================================================================================== This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan, Ltd. 19-21, Nihonbashi-Hakozakicho, Chuo-ku Tokyo 103-8510, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml. Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries. Java and all Java-based trademarks and logos are trademarks of Oracle and/or its affiliates. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Privacy Policy Considerations IBM Software products, including software as service solutions, (“Software Offerings”) may use cookies or other technologies to collect product usage information, to help improve the end user experience, to tailor interactions with the end user, or for other purposes. In many cases, no personally identifiable information is collected by the Software Offerings. Some of our Software Offerings can help enable you to collect personally identifiable information. If this Software Offering uses cookies to collect personally identifiable information, specific information about this offering’s use of cookies is set forth below. Depending on the configuration that is deployed in the application server, this Software Offering may use session cookies for session management. These cookies can optionally be enabled or disabled, but disabling the cookies will also disable the functionality that they enable. See the application server documentation for additional information. Optionally, you can also use functionality, such as typeahead, to store data locally on the browser. The data that is stored locally could contain personally identifiable information. For more information, see the Data validation topic in the Maximo Asset Management Information Center: http://pic.dhe.ibm.com/infocenter/tivihelp/v49r1/topic/com.ibm.mbs.doc/designer/c_ctr_data_validation.html If the configurations that are deployed for this Software Offering provide you as customer the ability to collect personally identifiable information from end users by using cookies and other technologies, you should seek your own legal advice about any laws that are applicable to such data collection, including any requirements for notice and consent. For more information about the use of various technologies, including cookies, for these purposes, see IBM’s Privacy Policy at http://www.ibm.com/privacy, IBM's Online Privacy Statement at http://www.ibm.com/privacy/details in the section entitled Cookies, Web Beacons and Other Technologies, and the IBM Software Products and Software-as-a-Service Privacy Statement at http://www.ibm.com/software/info/product-privacy.