Troubleshooting
Problem
The following are the System Configuration Utility program settings at the time it was shipped. The settings may have been changed by the user.
Resolving The Problem
System Configuration Utility Default Settings
The following are the System Configuration Utility program settings at the time it was shipped.
The settings may have been changed by the customer.
| Menu Options | Default Value |
| System | Group |
| System Identification and | Version Information |
| System Identification String | None |
| Config and Ovelay Version | |
| BIOS Version String | |
| MP Sec. Version | 1.1 |
| System Processor Status | |
| 1st Processor Status, Module 1 | No Failures detected |
| 2nd Processor Status, Module 1 | No failures detected |
| 3rd Processor Status, Module 2 | No failures detected |
| 4th Processor Status, Module 2 | No failures detected |
| System Performance | |
| Power-on Speed | Fast |
| Secondary IOAPIC control | Disable |
| Memory Subsystem | |
| Base Memory Option | 640 KB |
| Shadowing ISA ROMs Options | (Menu) |
| Extended Memory Options | (Menu) |
| Peripheral Configuration | Group |
| Automatic Configuration | Enable |
| Onboard Disk Controllers | |
| Onboard Floppy Controller | Enable |
| Onboard Communications Devices | |
| Serial Port 1 Configuration | Serial Port 1 Address and IRQ |
| Serial Port 2 Configuration | Serial Port 2 Address and IRQ |
| Parallel Port Configuration | Parallel Port Address and IRQ |
| Parallel Port Mode | Parallel port mode |
| Parallel Port DMA | Valid only with ECP mode |
| Floppy Subsystem Group | |
| Floppy drive A Options | Size and capacity |
| Floppy drive B Options | Size and capacity |
| Language Support Group | |
| Language Support options | Languages supported |
| Keyboard/Mouse Subsystem Group | |
| NumLock Options | Off at Boot |
| Typematic Speed | Auto |
| Mouse Control Option | Autodetected |
| Console Redirection | |
| COM port for redirection | Disable |
| Baud rate | 115.2k |
| Hardware Flow Control | None |
| Terminal Type | ANSI |
| Security Subsystem | |
| Administrator Password | Disable |
| User Password | Disable |
| Hot-Key Option | Disable |
| Lockout Timer | 10 min. |
| Secure Boot Mode | Disable |
| Video Blanking | Disable |
| Boot Subsystem Group | |
| First Startup Drive | Diskette Drive |
| Second Startup Drive | Hard Disk 0 |
| Third Startup Drive | Boot disabled |
| Fourth Startup Drive | Boot Network |
| Display '<F1> for Setup´ message during POST |
Enable |
| Require user interaction on POST errors |
Disable |
| SCSI ROM BIOS Options Group | |
| SCSI A ROM scan | Enable |
| SCSI B ROM scan | Enable |
| LCD | |
| LCD | Enable |
| LC Display String Before OS Boot | Default |
| Management | Subsystem |
| Temperature/Voltage Limit Control | (Menu) |
| A to D Channel Enable Switch | (Menu) |
| Speaker Options | Enable |
| Scan user flash area | Disable |
| System Management | Options |
| System Management Mode | Disable |
| SMM time stamp Source | POST capture |
| Event Logging | Disable |
| Reserve VGA resources | Reserve VGA memory |
The following table shows the defaults for system memory and extended
memory that was shipped with the system.
| Option | Default Value |
| System Memory | 640KB |
| Extended Memory | 360KB |
| Bank 1 socket 1 | 16MB (Non RAID and Disk Array Models) |
| 32MB (Open bay models) | |
| Bank 1 socket 2 | 16MB (Non RAID and Disk Array models) |
| 32MB (Open bay models) | |
| Bank 1 socket 3 | 16MB (Non RAID and Disk Array models) |
| 32MB (Open bay models) | |
| Bank 1 socket 4 | 16MB (Non RAID and Disk Array models) |
| 32MB (Open bay models) | |
| Bank 1 socket 5 | 16MB (Disk Array models) |
| Bank 1 socket 6 | 16MB (Disk Array models) |
| Bank 1 socket 7 | 16MB (Disk Array models) |
| Bank 1 socket 8 | 16MB (Disk Array models) |
| Bank 2 socket 1 | |
| Bank 2 socket 2 | |
| Bank 2 socket 3 | |
| Bank 2 socket 4 | |
| Bank 2 socket 5 | |
| Bank 2 socket 6 | |
| Bank 2 socket 7 | |
| Bank 2 socket 8 |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02PGY","label":"Older System x->PC Server 704->8650"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1GKEY-3H3K4D