This Fix Pack will upgrade your IBM SPSS Modeler 14.2 installation to IBM SPSS Modeler 14.2 FP2 (14.2.0.2).
This Fix Pack can only be installed over existing installations of IBM SPSS Modeler 14.2.
NOTE: If you are applying a Fix Pack to any Modeler component (batch, server, client, C&DS adapters), please ensure you install the equivalent Fix Pack to all other Modeler components. In addition if applying the Modeler 14.2 Fix Pack 2 adapter to C&DS, please first apply the required C&DS Fix Pack - these are detailed in the Modeler Adapter installation instructions below for each supported C&DS version.
NOTE: Solution Publisher 14.2 FP2 is available from: IBM SPSS Collaboration and Deployment Services 4.2.1.2
[{"PRLabel":"IBM SPSS Modeler 14.2","PRLang":"Language Independent","PRSize":"20655898624","PRPlat":{"label":"Platform Independent","code":"PF025"},"PRURL":"https://www.ibm.com/software/howtobuy/softwareandservices "}]
|
IBM SPSS Modeler 14.2 FixPack 2 Installation Instructions
 Windows platform Installation Instructions |
To Install on Windows platforms:
NOTE: Before applying the fix pack, you must back-up the options.cfg in your installation's \config directory. If the fix pack needs to update this file, any custom modifications will be overridden. After the fix pack is applied, review the options.cfg file to verify whether custom modifications have been reset.
1. Back-up the options.cfg file in your installation's \config directory.
2. Download the zip file containing the fix pack you require, and extract the contents of the .zip file. Doing so creates a .exe file.
3. Ensure Modeler Client or Batch is shut down before applying the fix pack. If you are updating Modeler Server, ensure that its service is stopped.
4. Double-click the .exe file that you have downloaded. The installer automatically finds your Modeler 14.2 installation.
5. When the installation wizard is displayed, choose "Next" and then "Install" to apply the fix pack. |
|
| Unix and Linux platforms (Modeler Batch and Modeler Server only) Installation Instructions |
To Install on UNIX and Linux platforms (Modeler Batch and Modeler Server only):
NOTE: Before applying the fix pack, you must back-up the options.cfg in your installation's \config directory. If the fix pack needs to update this file, any custom modifications will be overridden. After the fix pack is applied, review the options.cfg file to verify whether custom modifications have been reset.
1. Back-up the options.cfg file in your installation's \config directory.
2. Download the appropriate .gz file containing the fix pack you require, and uncompress the .gz file, using a utility such as gunzip. Doing so creates an executable .bin file.
3. If you are updating Modeler Server, stop Modeler Server and back up it's installation directory. After you have stopped Modeler Server run the command:
./modelersrv.sh list
This command should return no processes.
4. On AIX ONLY, enter the following command:
/usr/sbin/slibclean
5. Ensuring that you are logged in as the user that originally installed the product, copy the .bin file (from the fix pack's .gz file) to the product's installation directory.
6. Execute the .bin file that you have copied into the product's installation directory and follow the installation wizard prompts. An example of executing a .bin file is:
./modelerserveraix64.bin
|
|
|
|
|
|
|
|
IBM SPSS Modeler 14.2 FixPack 2 Adapters for Collaboration and Deployment Services (C&DS) Installation Instructions
*Adapters for C&DS 4.2 may also be used for C&DS 4.2.1
Modeler Adapters for C&DS 4.2.1 Installation Instructions |
The IBM SPSS Modeler 14.2 FixPack 2 Adapters for Collaboration and Deployment Services allow C&DS 4.2.1.2 to recognize and work with Modeler Server 14.2 FixPack 2.
NOTE: In order to apply these packages it is a requirement that you install C&DS 4.2.1.2 You MUST also apply 14.2 FixPack 2 to your Modeler Server installation(s).
Installation Instructions
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
C:\Program Files\IBM\SPSS\Collaboration and Deployment Services\4.2.1\Server
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services, and extract the contents of the zip file. Doing so creates a .exe file.
3. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
4. Double-click the .exe file that you have extracted from the .zip file.
5. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the "Server" subdirectory of the directory to which the Collaboration and Deployment Services software was installed at the repository host, eg:
C:\Program Files\IBM\SPSS\Collaboration and Deployment Services\4.2.1\Server
6. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 3
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration
7. Restart the Collaboration and Deployment Services Application server or service.
- Unix systems (except iSeries)
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2.1/Server
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the compressed binary (.bin.gz) file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Uncompress the downloaded file using a utility such as gunzip.
4. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the .bin file that was uncompressed in step 3. For example:
./14.2-IM-S14MODELERCDS42-Solaris-FP002.bin
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the "Server" subdirectory of the directory to which the Collaboration and Deployment Services software was installed at the repository host, eg:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2.1/Server
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration
8. Restart the Collaboration and Deployment Services Application server or service.
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2.1/Server
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Extract the contents of the .zip file using the jar utility. This will create an install.jar file. For example:
jar -xvf 14.2-IM-S14MODELERCDS42-iSeries-FP002.zip
4. If using a WebSphere application, log into the WebSphere profile and disable all applications.
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the install.jar file that was extracted from the .zip file:
java -jar install.jar
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the "Server" subdirectory of the directory to which the Collaboration and Deployment Services software was installed at the repository host, eg:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2.1/Server
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
Note: Under some circumstances, the installer for iSeries will be unable to determine the available disk space on the disk partition where Collaboration and Deployment Services has been installed, and will report a number of errors instead. These errors can safely be ignored as they do not affect installation of the adapter.
An example of the errors reported is shown below, where <install-dir> is the directory where you installed Collaboration and Deployment Services:
#### Cannot match UNIX flavor to a filesystem table: attempting '/etc/fstab'
fstab: /etc/fstab (A file or directory in the path name does not exist.)
** FileSystem (FSTab): could not generate static fs table
#### Cannot match UNIX flavor to a filesystem table: attempting 'df -k'
CheckDiskSpace: Error determining free disk space for:
<install-dir>
java.lang.NoClassDefFoundError: com/ibm/as400/access/IFSFile
…
at com.zerog.ia.installer.AAMgrBase.m(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.Main.main(DashoA10*..)
at install.main(DashoA10*..)
CDS: Assuming sufficient disk space. (-1)
Should you experience further issues with this installation, contact Technical Support.
|
|
|
|
|
|
|
|
| Modeler Adapters for C&DS 4.2 Installation Instructions |
The IBM SPSS Modeler 14.2 FixPack 2 Adapters for Collaboration and Deployment Services allow C&DS 4.2.0 to recognize and work with Modeler Server 14.2 FixPack 2.
NOTE: In order to apply these packages it is a requirement that you install C&DS 4.2.0 You MUST also apply 14.2 FixPack 2 to your Modeler Server installation(s).
Installation Instructions
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
C:\Program Files\IBM\SPSS\Collaboration and Deployment Services\4.2\Server
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services, and extract the contents of the zip file. Doing so creates a .exe file.
3. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
4. Double-click the .exe file that you have extracted from the .zip file.
5. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the "Server" subdirectory of the directory to which the Collaboration and Deployment Services software was installed at the repository host, eg:
C:\Program Files\IBM\SPSS\Collaboration and Deployment Services\4.2\Server
6. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 3
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
7. Restart the Collaboration and Deployment Services Application server or service.
- Unix systems (except iSeries)
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2/Server
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the compressed binary (.bin.gz) file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Uncompress the downloaded file using a utility such as gunzip.
4. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the .bin file that was uncompressed in step 3. For example:
./14.2-IM-S14MODELERCDS42-Solaris-FP002.bin
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the "Server" subdirectory of the directory to which the Collaboration and Deployment Services software was installed at the repository host, eg:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2/Server
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
8. Restart the Collaboration and Deployment Services Application server or service.
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2/Server
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Extract the contents of the .zip file using the jar utility. This will create an install.jar file. For example:
jar -xvf 14.2-IM-S14MODELERCDS42-iSeries-FP001.zip
4. If using a WebSphere application, log into the WebSphere profile and disable all applications.
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the install.jar file that was extracted from the .zip file:
java -jar install.jar
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the "Server" subdirectory of the directory to which the Collaboration and Deployment Services software was installed at the repository host, eg:
/opt/IBM/SPSS/Collaboration_and_Deployment_Services/4.2/Server
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration
Note: Under some circumstances, the installer for iSeries will be unable to determine the available disk space on the disk partition where Collaboration and Deployment Services has been installed, and will report a number of errors instead. These errors can safely be ignored as they do not affect installation of the adapter.
An example of the errors reported is shown below, where <install-dir> is the directory where you installed Collaboration and Deployment Services:
#### Cannot match UNIX flavor to a filesystem table: attempting '/etc/fstab'
fstab: /etc/fstab (A file or directory in the path name does not exist.)
** FileSystem (FSTab): could not generate static fs table
#### Cannot match UNIX flavor to a filesystem table: attempting 'df -k'
CheckDiskSpace: Error determining free disk space for:
<install-dir>
java.lang.NoClassDefFoundError: com/ibm/as400/access/IFSFile
…
at com.zerog.ia.installer.AAMgrBase.m(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.Main.main(DashoA10*..)
at install.main(DashoA10*..)
CDS: Assuming sufficient disk space. (-1)
Should you experience further issues with this installation, contact Technical Support.
|
|
|
|
|
|
|
|
Modeler Adapters for C&DS 4.1 Installation Instructions |
The IBM SPSS Modeler 14.2 FixPack 2 Adapters for Collaboration and Deployment Services allow C&DS 4.1.2 to recognize and work with Modeler Server 14.2 FixPack 2.
NOTE: In order to apply these packages it is a requirement that you install C&DS 4.1.2 patch. You MUST also apply 14.2 FixPack 2 to your Modeler Server installation(s).
Installation Instructions
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
C:\Program Files\SPSSInc\PASW Collaboration and Deployment Services 4.1
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services, and extract the contents of the zip file. Doing so creates a .exe file.
3. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
4. Double-click the .exe file that you have extracted from the .zip file.
5. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the directory to which the Collaboration and Deployment Services software was installed at the repository host.
6. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 3
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
7. Restart the Collaboration and Deployment Services Application server or service.
- Unix systems (except iSeries)
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/root/SPSSInc/PASW_Collaboration_Deployment_Services_4.1
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the compressed binary (.bin.gz) file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Uncompress the downloaded file using a utility such as gunzip.
4. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the .bin file that was uncompressed in step 3. For example:
./14.2-IM-S14MODELERCDS41-Solaris-FP002.bin
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the directory to which the Collaboration and Deployment Services software was installed at the repository host.
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
8. Restart the Collaboration and Deployment Services Application server or service.
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/root/SPSSInc/PASW_Collaboration_Deployment_Services_4.1
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Extract the contents of the .zip file using the jar utility. This will create an install.jar file. For example:
jar -xvf 14.2-IM-S14MODELERCDS41-iSeries-FP002.zip
4. If using a WebSphere application, log into the WebSphere profile and disable all applications.
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the install.jar file that was extracted from the .zip file:
java -jar install.jar
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the directory to which the Collaboration and Deployment Services software was installed at the repository host.
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration
Note: Under some circumstances, the installer for iSeries will be unable to determine the available disk space on the disk partition where Collaboration and Deployment Services has been installed, and will report a number of errors instead. These errors can safely be ignored as they do not affect installation of the adapter.
An example of the errors reported is shown below, where <install-dir> is the directory where you installed Collaboration and Deployment Services:
#### Cannot match UNIX flavor to a filesystem table: attempting '/etc/fstab'
fstab: /etc/fstab (A file or directory in the path name does not exist.)
** FileSystem (FSTab): could not generate static fs table
#### Cannot match UNIX flavor to a filesystem table: attempting 'df -k'
CheckDiskSpace: Error determining free disk space for:
<install-dir>
java.lang.NoClassDefFoundError: com/ibm/as400/access/IFSFile
…
at com.zerog.ia.installer.AAMgrBase.m(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.Main.main(DashoA10*..)
at install.main(DashoA10*..)
CDS: Assuming sufficient disk space. (-1)
Should you experience further issues with this installation, contact Technical Support.
|
|
|
|
|
|
|
|
| Modeler Adapters for C&DS 4.0 Installation Instructions |
The IBM SPSS Modeler 14.2 FixPack 2 Adapters for Collaboration and Deployment Services allow C&DS 4.0.4 to recognize and work with Modeler Server 14.2 FixPack 2.
NOTE: In order to apply these packages it is a requirement that you install C&DS 4.0.4 patch. You MUST also apply 14.2 FixPack 2 to your Modeler Server installation(s).
Installation Instructions
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
C:\Program Files\SPSSInc\PASW Collaboration and Deployment Services 4
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services, and extract the contents of the zip file. Doing so creates a .exe file.
3. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- Oracle: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
4. Double-click the .exe file that you have extracted from the .zip file.
5. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the directory to which the Collaboration and Deployment Services software was installed at the repository host.
6. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 3
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
7. Restart the Collaboration and Deployment Services Application server or service.
- Unix systems (except iSeries)
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/root/SPSSInc/PASW_Collaboration_Deployment_Services_4
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the compressed binary (.bin.gz) file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Uncompress the downloaded file using a utility such as gunzip.
4. Ensure that the Collaboration and Deployment Services application server is in the following state:
- JBoss: shutdown
- WebLogic: shutdown
- Oracle: shutdown
- WebSphere: If using a WebSphere application, log into the WebSphere profile and disable all applications.
Here are the steps to disable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the .bin file that was uncompressed in step 4. For example:
./14.2-IM-S14MODELERCDS40-Solaris-FP002.bin
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the directory to which the Collaboration and Deployment Services software was installed at the repository host.
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
8. Restart the Collaboration and Deployment Services Application server or service.
1. If a previous installation installed either of the following files to the <install-dir>/staging directory, delete them from there:
ModelerScoring_13_0_0.package
ModelerScoring_13_0_2.package
Note:<install-dir> refers to the installation directory, for example:
/root/SPSSInc/PASW_Collaboration_Deployment_Services_4
Note: Do not delete any other "Modeler*.package" files that may reside in this directory; only the ones specified above, if they exist.
2. Download the .zip file containing the correct adapter for your operating system and version of Collaboration and Deployment Services.
3. Extract the contents of the .zip file using the jar utility. This will create an install.jar file. For example:
jar -xvf 14.2-IM-S14MODELERCDS40-iSeries-FP002.zip
4. If using a WebSphere application, log into the WebSphere profile and disable all applications.
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Disable Auto Start.
d. Save changes to the administrative configuration.
5. Execute the install.jar file that was extracted from the .zip file:
java -jar install.jar
6. Follow the on-screen instructions to complete the installation. When prompted, enter the username and password of the repository administrator. Ensure that the installation folder is set to the directory to which the Collaboration and Deployment Services software was installed at the repository host.
7. If using a WebSphere application, log into the WebSphere profile and enable each application disabled in step 4
Here are the steps to enable the auto start for an application:
a. Go to the Target specific application status page for your application. Click Applications > Application Types > WebSphere enterprise applications > application_name > Target specific application status.
b. Select the target server on which the application resides.
c. Click Enable Auto Start.
d. Save changes to the administrative configuration.
8. Restart the Collaboration and Deployment Services Application server or service.
Note: Under some circumstances, the installer for iSeries will be unable to determine the available disk space on the disk partition where Collaboration and Deployment Services has been installed, and will report a number of errors instead. These errors can safely be ignored as they do not affect installation of the adapter.
An example of the errors reported is shown below, where <install-dir> is the directory where you installed Collaboration and Deployment Services:
#### Cannot match UNIX flavor to a filesystem table: attempting '/etc/fstab'
fstab: /etc/fstab (A file or directory in the path name does not exist.)
** FileSystem (FSTab): could not generate static fs table
#### Cannot match UNIX flavor to a filesystem table: attempting 'df -k'
CheckDiskSpace: Error determining free disk space for:
<install-dir>
java.lang.NoClassDefFoundError: com/ibm/as400/access/IFSFile
…
at com.zerog.ia.installer.AAMgrBase.m(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
at com.zerog.ia.installer.Main.main(DashoA10*..)
at install.main(DashoA10*..)
CDS: Assuming sufficient disk space. (-1)
Should you experience further issues with this installation, contact Technical Support.
|
|
|
|
|
|
|
|
|
|
On
[{"DNLabel":"Modeler Client 14.2 FP2 Win32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"349278304","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERC-WIN32-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Client 14.2 FP2 Win64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"372396304","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERC-WIN64-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Docs 14.2 FP2 Multiplatform","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"16384134","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERDOC-MP-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Batch 14.2 FP2 Win32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"38458688","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERB-WIN32-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Batch 14.2 FP2 Lin32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"92193135","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERB-Linux8632-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Batch 14.2 FP2 ZLin64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"96207463","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERB-LinuxzOS-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Batch 14.2 FP2 AIX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"111458181","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERB-AIX-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Batch 14.2 FP2 HPUX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"176369555","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERB-HPUXIA-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Batch 14.2 FP2 Sol64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"119630459","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERB-Solaris-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 Win32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"249951256","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-WIN32-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 Win64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"129802967","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-WIN64-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 Lin32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"123713883","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-Linux8632-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 Lin64","DNDate":"14 Dec 2011","DNLang":"Language Independent","DNSize":"129802967","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-Linux8664-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 ZLin64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"112534469","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-LinuxzOS-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 AIX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"197020217","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-AIX-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 HPUX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"307161433","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-HPUXIA-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Modeler Server 14.2 FP2 Sol64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"132353937","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERS-Solaris-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 Win32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"422632648","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-WIN32-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 Win64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"467097056","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-WIN64-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 Lin32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"524110006","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-Linux8632-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 Lin64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"537395298","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-Linux8664-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 AIX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"699255227","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-AIX-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 HPUX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"912547598","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-HPUXIA-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 Sol64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"512009727","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-Solaris-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.0 iSeries","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"681834665","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS40-iSeries-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 Win32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"453647968","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-WIN32-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 Win64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"498111288","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-WIN64-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 Lin32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"555121596","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-Linux8632-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 Lin64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"568406888","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-Linux8664-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 AIX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"730266816","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-AIX-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 HPUX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"943559188","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-HPUXIA-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 Sol64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"543021317","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-Solaris-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"Adapters 14.2 FP2 C&DS 4.1 iSeries","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"712849336","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS41-iSeries-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 Win32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"454873912","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-WIN32-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 Win64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"499336848","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-WIN64-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 Lin32","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"556354336","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-Linux8632-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 Lin64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"569639628","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-Linux8664-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 ZLin64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"529385894","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-LinuxzOS-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 AIX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"731499556","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-AIX-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 HPUX64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"944791928","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-HPUXIA-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 Sol64","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"544254057","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-Solaris-FP002&source=fc","DNURL_FTP":" ","DDURL":null},{"DNLabel":"*Adapters 14.2 FP2 C&DS 4.2 iSeries","DNDate":"2011-12-14","DNLang":"Language Independent","DNSize":"714072114","DNPlat":{"label":"Platform Independent","code":"PF025"},"DNURL":"http://www.ibm.com/support/fixcentral/swg/quickorder?parent=ibm~Information+Management&product=ibm/Information+Management/SPSS+Modeler&function=fixId&fixids=14.2-IM-S14MODELERCDS42-iSeries-FP002&source=fc","DNURL_FTP":" ","DDURL":null}]
[{"Product":{"code":"SS3RA7","label":"IBM SPSS Modeler"},"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Component":"--","Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"14.2","Edition":"All Editions","Line of Business":{"code":"LOB10","label":"Data and AI"}}]