IBM Corporation --- IBM(R) Maximo(R) Tivoli Process Automation Engine 7.5.0.5 IBM Corporation Note: Before using this information and the product it supports, read the information in the Notices section at the end of this document. (C) Copyright International Business Machines Corporation 2011, 2014. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. =============================================================================================== Table of Contents =============================================================================================== I. Introduction II. Resource Information III. Installation Instructions IV. Behavior Changes V. Manual Changes VI. Issues Resolved VII. Notices =============================================================================================== I. Introduction =============================================================================================== Product : Tivoli Process Automation Engine Version : Release 7.5.0.5 Dependencies : NONE PREREQUISITES : Tivoli Process Automation Engine Release 7.5.0.5 has been installed CO-REQUISITES : NONE A Interim Fix is a group of critical issues that have been repaired since the product fix pack or patch was released. The Interim Fix is cumulative and may contain other fixes in addition to the issues that affect your site. The Interim Fix must be applied in full in order to be supportable. Customers should validate this Interim Fix by installing it in a test environment before rolling it out to a production environment. Interim Fixes, by their very nature, go through a limited quality assurance cycle and may not be included in the latest available program patch. =============================================================================================== II. Resource Information =============================================================================================== Knowledge center URL: http://www-01.ibm.com/support/knowledgecenter/SSLKT6_7.5.0.5/com.ibm.mam.doc/welcome.html Description: Access the information center to view the product documentation. Topics include product overviews; installation and configuration tasks; instructions for using, administering, and troubleshooting the product; and security information. Asset Management community on Service Management Connect URL: https://www.ibm.com/developerworks/servicemanagement/am/ Description: Use Service Management Connect to access the product's blogs, wikis, forums, and communities. In Service Management Connect you can review information such as best practices, performance and tuning, and product integrations. You can also collaborate with IBM experts and the broader user community and access continuous open betas. IBM Maximo Asset Management support resources portal http://www-947.ibm.com/support/entry/portal/overview/software/tivoli/maximo_asset_management Description: The IBM support resources portal provides access to tools and resources to keep your systems, software, and applications running smoothly. From the support resources portal you can find fixes, service requests, useful links and an enhanced search to help you find information quickly. =============================================================================================== III. Installation Instructions =============================================================================================== NOTE For Microsoft Windows 2008 users, you must log in as an administrator before you upgrade to a Maximo Asset Management interim fix pack. If you attempt to upgrade when you are not logged in as an administrator, the installation fails. NOTE The Interim Fix file should be copied to a location on the server where Maximo is installed. NOTE Uninstall Information - This interim fix is provided to you as a PSI zip file. When run with the PSI Installer program, it overwrites your existing Maximo directory structure and may contain database scripts that modify your database. If you want to reverse your changes, you must restore your backed-up versions of the Maximo directory and database. Follow these steps to apply this Interim Fix: 1 Ensure that no database configuration changes are pending. 2 Shut down the Maximo application server. 3 Back up the database. 4 Copy the Maximo directory. 5 Download the TPAE_7505_IFIX..psi.zip file and copy to the Maximo server. 6 To start the PSI Installer, open the desktop folder Maximo Asset Management and click on Process Solution Installer -SMP. The installer can also be launched by navigating with a command prompt to C:\ibm\SMP\bin and running solutionInstallerGUI.bat 7 In the Introduction panel, click Next. 8 In the Choose PSI Package panel, click Choose, navigate to the TPAE_7505_IFIX..psi.zip file, select the file, and click Open. 9 Follow the onscreen instructions. 10 Run the 'updatedb.bat' utility to run all the interim fix database scripts: a. At a command prompt, change directory to '\tools\maximo'. For example, c:\IBM\SMP\maximo\tools\maximo. b. Run 'updatedb.bat'. 11 Apply any manual updates listed in this readme.txt file. To find the manual updates for each APAR, the information related to the APAR in the Manual Changes section. 12 Delete the application server cache folders. For Oracle WebLogic Server, delete the 'cache' and 'tmp' folders in \user_projects\domains\mydomain\servers\AdminServer\. Example: C:\bea923\user_projects\domains\max75domain\servers\AdminServer\cache C:\bea923\user_projects\domains\max75domain\servers\AdminServer\tmp For IBM WebSphere(R) Application Server, delete the cache folder in \AppServer\profiles\Custom01\temp\Node01\MAXIMOSERVER\MXServer 13 Delete the Web browser cache on every computer that uses Maximo base services. 14 Rebuild and redeploy the EAR files, and then restart the application server. -------- -------- =============================================================================================== IV. Behavior Changes =============================================================================================== Starting for the TPAE 7.5.0.5 Interim Fix IF006, all issues that require behavior changes as part of the resolution, will be listed in this Behavior Changes section. ----------------------------------------------------------------------------------------------- Begin IF006 ----------------------------------------------------------------------------------------------- APAR #: IV51220 Issue(s): 123151 Description: In the Logging application, script execution logs the total time to run log the script regardless of the log level, and uses multiple scripts with high frequency. --- APAR #: IV54674 Issue(s): 122950 In Tivoli's process automation engine 7.5.x, if you not have Read or Modify rights for result set portlets, the links to access the Portlet Options dialog are hidden by default. This is a change from TPAE 7.1.x, where the links were still displayed regardless of security rights.To allow the function to be consistent with 7.1.x, a new sigoption was added via database script. It is called Show Options For Read-only Portlet option and appears in Security Groups under the security options for the Start Center application. The behavior of this sigoption is as follows: - If false, the result set options links are not displayed on any portlet if the user does not have Read/Modify rights for result set portlets. - If true, the result set options links are displayed for all portlets regardless of whether the user has Read/Modify rights for result set portlets. This is consistent with 7.1.x behavior. The Show options For Readonly Portlet option is set to false by default. --- APAR #: IV54698 Issue(s): 122149 Description: The relationship from MRLINE to PO to bring the latest PO revision associated with MRLINE was modified. The relationship is outlined in the View Desktop Requisition application and the Line Details dialog. Changes are as follows: parent=MRLINE, child=PO, name=PO Before: The PO number in (select ponum from poline where mrnum = :mrnum and mrlinenum = :mrlinenum) and siteid=:siteid After: The PO number in (select ponum from poline where mrnum = :mrnum and mrlinenum = :mrlinenum) and siteid=:siteid order by revisionnum desc --- APAR #: IV52583 Issue(s): 116697 Before: In the rich text editor, the font size changes to the default size on new lines when the enter key is pressed. After: The currently selected font size is continued on new lines when the enter key is pressed. ------------------------------------------------------------------------------------------------- Begin IF007 ------------------------------------------------------------------------------------------------- APAR #: IV53957 Issue(s): 120054 Description: A new system property was added to Maximo that allows users to handle incoming data from local geocode services. If the Set Record Location map feature produces incorrectly formatted addresses or addresses with missing parts or if you use a local geocode service with specific attribute names, you can create a system property called MXE.MAP.SPATIALREVGEOCODEADDRESSFORMAT and add a formatter string where the parameter names starts and finishes with a $. --- APAR #: IV51372 Issue(s): 117976 Description: The Preventive Maintenance Labor has been changed to filter data properly through SQL queries. --- APAR #: IV55183 Issue(s): 123928 Description: If lines are not completed or linked to revised purchase orders, you can now close a desktop requisition. --- APAR #: IV56115 Issue(s): 125571 Description: The addition of a new property "webclient.refreshKpiPortlet" allows you to control whether or not the KPI portlets are refreshed during login. --- APAR #: IV56352 Issue(s): 125975 Description: Setting webclient.defaultbutton to 0 or false will make all buttons to be non-default and pressing the enter key will not perform the default button action. --- APAR #: IV53190 Issue(s): 128760 Description: The Date/time Calendar widget defaults to today, and the OK button is enabled. --- APAR #: IV56755 Issue(s): 127439 Description: An error message is included to explain which line causes a negative balance. --- APAR #: IV57727 Issue(s): 128738 Description: Properties in related tables update correctly. --- APAR #: IV52157 Issue(s): 121588 Description: You can use the getDateFunction() to retrieve the parameter dates without time elements to filter a query. --- APAR #: IV49925 Issue(s): 119410 Description: The RFQ Vendor returns RFQ Lines that are materials, services, and items. --- APAR #: IV55354 Issue(s): 131259 Description: If a previous revision is cancelled or closed, you are allowed to create a revisiion. --- APAR #: IV59388 Issues(s): 131019 Description: A new command line parameter "-r" is added to specify number of records that are read before a query is restarted to avoid old errors. --- APAR #: IV20930 Issues(s): 130022 Description: The Integrity Checker ignores OA_longdescription fields. --- APAR #: IV59612 Issues(s): 131598,146835 Description: A new, property mxe.skd.setactivitymodified, was added. If you change the property value from the default to 0, the skdactivity record is not marked as modified on the default settings of Start and End times. --- APAR #: IV60285 Defect: 133536 Description: Changes were made to the length and type of the OwnerID field. These changes were made to match parent referral columns. Database Scripts: HF7505_11.dbc Manual Changes: N/A ------------------------------------------------------------------------------------------- Begin IF009 ------------------------------------------------------------------------------------------- APAR #: IV59604 Defect: 133236 Description: The long operation dialog will now activate on the upload file control by changing the event from LOADDATA to DOLONGOP. Manual Changes: N/A --- APAR #: IV60285 Defect: 133536 Description: Changes were made to the length and type of the OwnerID field. These changes were made to match parent referral columns. Manual Changes: N/A --- APAR #: IV57436 Defect: 128709 Description: The LIFOFIFOCOST table is now a left outer join due to not always having a cost record when balances are initially entered as 0. Manual Changes: N/A --- APAR #: IV40436 Defect: 132177 Description: A change was made to the filters based on PM being the main table rather than WORKORDER. This changes assures that regardless of which application this report was run from, the main query and all subqueries would function properly. Manual Changes: N/A ------------------------------------------------------------------------------------------- Begin IF010 ------------------------------------------------------------------------------------------- APAR #: IV60285 Defect: 133536 Description: Changes were made to the type and length of the Ownerid field in work order specifications. --- APAR #: IV56643 Defect: 127748 Description: A table, REPORTBROS, was added to Maximo. This is an internal table. --- APAR #: IV59960 Defect: 132651 Description: You can now use a comma operator between query terms to perform logical Or statements in text searches. --- APAR #: IV59253 Defect: 130937 Description: You can now use a comma operator between query terms to perform logical Or statements in text searches. --- ------------------------------------------------------------------------------------------- Begin IF011 ------------------------------------------------------------------------------------------- APAR #: IV61388 Defect: 137104 Description: You cannot have items that are set to active at an inventory level and pending at an organization level. Database Scripts: HF7505_13.dbc Manual Changes: N/A --- -------- ------------------------------------------------------------------------------------------- Begin IF012 ------------------------------------------------------------------------------------------- APAR #: IV60883 Defect: 138331 Description: There are several instances where the Work log queries take up to 2 minutes to complete. Database Scripts: HF7505_16.dbc Manual Changes: N/A --- APAR #: IV61618 Defect: 139322 Description: The Report List portlet allows you to select reports you don't have access to. Database Scripts: HF7505_17.dbc Manual Changes: N/A -------- ------------------------------------------------------------------------------------------- Begin IF013 ------------------------------------------------------------------------------------------- APAR #: IV47771 Defect: 145815 Description: You cannot void a service receipt if you do not have permission to receive and return material receipts. Database Scripts: HF7505_21.dbc Manual Changes: N/A -------- APAR #: IV47303 Defect: 147705 Description: When text search is enable, a language column name must be specified. The LANGCOLUMNNAME column has been added to the DMMAXOBJECTCFG migration group. Database Scripts: N/A Manual Changes: N/A --- ------------------------------------------------------------------------------------------- Begin IF014 ------------------------------------------------------------------------------------------- APAR #: IV49887 Defect: 140692 Description: A singe row subquery returns more than one row. Database Scripts: HF7505_25.dbc Manual Changes: N/A --- APAR #: IV65035 Defect: 148965 Description: In the Graphical Assignment application, when you do emergency work, emails are incorrectly sent out. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54963 Defect: 150147 Description: When you use form based authentication and an error is returned from the Maximo server during the login process, you are now redirected back to the login page with the error message displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50149 Defect: 122284 Description: The hourly rate for crew types is calculated as the average hourly rate instead of the sum of the hourly rates. Database Scripts: N/A Manual Changes: N/A ------------------------------------------------------------------------------------------- Begin IF015 ------------------------------------------------------------------------------------------- APAR #: IV60191 Defect: 133324 Description: In the Assets application, when you upgrade from 7.1 to 7.5, the Meter Reading relationship causes the Asset History tab to freeze. Database Scripts: HF7505_28.dbc Manual Changes: N/A --- APAR #: IV65074 Defect(s): 148745 Description: When a Result Set Graph uses dot notation, and error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65532 Defect: 150591 Description: In the Assets application, the View Asset Status History dialog is not accessible for assets that are not calibrated. Database Scripts: HF7505_26.dbc Manual Changes: N/A ------------------------------------------------------------------------------------------- End IF015 ------------------------------------------------------------------------------------------- APAR #: IV71835 Defect: 169290 Description: When an Inventory Usage record was created to transfer an Item of cost type LIFO or FIFO, the GL Debit Account was incorrectly autofilled with the To Storeroom's GL Control Account. Now, it correctly autofills with that Inventory record's GL Control Account. This reflects the behavior from the Transfer Current Item dialog in the Inventory application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70782 Defect: 167230 Description: When PO Lines were created for Items with certain combinations of Rotating, Inspection Required, and Cost Type, and non-default GL Debit Accounts were specified on the PO Lines, the TRANSFER Receipt lines for those items incorrectly autofilled the GL Debit Account field with the To Storeroom's GL Control Account. Now, the field correctly autofills with the GL Debit Account specified on the PO Line. Database Scripts: N/A Manual Changes: N/A --- =============================================================================================== V. Manual Changes =============================================================================================== --- ------------------------------------------------------------------------------------------- Begin IF002 ------------------------------------------------------------------------------------------- APAR #: N/A Defect: 108143 Database Scripts: N/A Manual Changes: If you intend to use SCCD/Tpae as an OSLC provider, then an additional security-contraint clause must be added to the Maximo application web.xml file (when SCCD/Tpae is set up to use application server security). Add the following block in the section of the web.xml file when you plan to use OSLC services/servlet. The web.xml file can be found under \maximo\applications\maximo\maximouiweb\webmodule\WEB-INF. MAXIMO OSLC Provider MAXIMO OSLC Provider Security /oslc/* GET POST PUT DELETE Roles that have access to MAXIMO OSLC maximouser data transmission gaurantee NONE --- ------------------------------------------------------------------------------------------- Begin IF004 ------------------------------------------------------------------------------------------- APAR #: IV50316 Issue(s): 113470 Description: In the Report Viewer application, when an error occurs in BIRT, it displays the server name where the error occurred and the stacktrace. Manual Changes: Add following to applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml ReportRequestFilter com.ibm.tivoli.maximo.report.birt.servlet.ReportRequestFilter ReportRequestFilter /report/* --- ------------------------------------------------------------------------------------------- Begin IF005 ------------------------------------------------------------------------------------------- APAR #: IV51662 Defect(s): 113791 Description: When you do a lookup on alphanumeric values in the Attribute Search for Assets, Locations etc, the lookup shows every single ALN domain value in the system. Manual Changes: 1) Go to application designer and export the library.xml file, save it to a temporary directory. Edit the file with a text editor. 2) Locate the section with dialog id="searchAttributeMultipleAssets", subsection with table id="searchAttributeMultipleAssets_table" Under the section containing tablebody id="searchAttributeMultipleAssets_table_tablebody", make the following changes 1. Add this tablecol: 2. Comment out the tablecol id="searchAttributeMultipleAssets_table_tablebody_4" and tablecol id="searchAttributeMultipleAssets_table_tablebody_5" (example below:) 3. Uncomment the tablecol id="searchAttributeMultipleAssets_table_tablebody_7" by removing '' 4. Modify the tablecol id="searchAttributeMultipleAssets_table_tablebody_7" a. remove the lookup="alndomain" b. add the following line menutype="normal" label="Search Value" in the location of the lookup="alndomain" (example below:) Locate the section with dialog id="searchAttributeMultipleLocations", subsection with table id="searchAttributeMultipleLocations_table" Under the section containing tablebody id="searchAttributeMultipleLocations_table_tablebody", make the following changes 1. Add this tablecol: 2. Comment out the tablecol id="searchAttributeMultipleLocations_table_tablebody_4" and tablecol id="searchAttributeMultipleLocations_table_tablebody_5" (example below:) 3. Uncomment the tablecol id="searchAttributeMultipleLocations_table_tablebody_7" by removing '' 4. Modify the tablecol id="searchAttributeMultipleLocations_table_tablebody_7" a. remove the lookup="alndomain" b. add the following line menutype="normal" label="Search Value" in the location of the lookup="alndomain" (example below:) Locate the section with dialog id="searchAttributeMultipleCIs", subsection with table id="searchAttributeMultipleCIs_table" Under the section containing tablebody id="searchAttributeMultipleCIs_table_tablebody", make the following changes 1. Add this tablecol: 2. Comment out the tablecol id="searchAttributeMultipleCIs_table_tablebody_4" and tablecol id="searchAttributeMultipleCIs_table_tablebody_5" (example below:) 3. Uncomment the tablecol id="searchAttributeMultipleCIs_table_tablebody_7" by removing '' 4. Modify the tablecol id="searchAttributeMultipleCIs_table_tablebody_7" a. remove the lookup="alndomain" b. add the following line menutype="normal" label="Search Value" in the location of the lookup="alndomain" (example below:) 3) Go back to application designer and import the library.xml file. ------ APAR #: IV55019 Defect(s): 122850 Description: In the Report Viewer application, a CUSTOMERREPORT.JSP has a reflected XSS. Manual Changes: If the file applications\maximo\maximouiweb\webmodule\webclient\utility\customreport.jsp has been customized to support a reporting integration, the customizations will need to be reapplied. Following the examples in the updated file, apply the HTML.cleanHtml utility method to each request parameter referenced in the JSP. --- ------------------------------------------------------------------------------------------- Begin IF006 ------------------------------------------------------------------------------------------- APAR #: IV47421 Defect: 123432 Description: The Favorite Application portlet does not remove application reference when security rights are removed. Manual Changes: Set system property "webclient.hideUnauthorizedFavoriteApps" to "1" to hide unauthorized applications from favorite applications portlet. --- APAR #: IV46438 Defect: 124395 Description: The calendar does not update time fields correctly. Manual Changes: Set the system property webclient.useClientTimer to "1" to use a client side timer to adjust the default time on Date/Time Calendar widgets. APAR #: IV52344 ------------------------------------------------------------------------------------------- Begin IF007 ------------------------------------------------------------------------------------------- Defect: 115872 Description: In the Organizations application, the inventory Quantity Available field allows a negative value. For this APAR a new message needs to be added 1) Go to System Configuration, Platform Configuration, Database Configuration 2) Go to Select Action and choose Messages 3) Click New Row and copy in the following information Message Group = workorder Message Key = WPCauseNegBal Message Id Prefix = BMXAA Value = There is at least one hard reservation that will cause the inventory balance to be less than zero. Either change the quantity needed or change the reservation type 4) Click Ok --- ------------------------------------------------------------------------------------------- Begin IF008 ------------------------------------------------------------------------------------------- APAR #: Defect(s): 131937 Description: You no longer need to save when you select cancel on the Change Status dialog in scheduler application. Manual Changes : 1) Export the scheduler.xml using Application Designer. Save this export in a location where you can edit it. 2) Open the just-saved scheduler.xml in a text editor. 3) Search for - replace with 5) Search for - replace with 7) Search for - replace with 9) Search for - replace with 11) Save the modifications and import the modified scheduler.xml. 12) Export the grpassign.xml using Application Designer. Save this export in a location where you can edit it. 13) Open the just-saved grpassign.xml in a text editor. 14) Search for - replace with 16) At the end of the line remove savemode="ONUNLOAD" replace with 17) At the end of the line remove savemode="ONUNLOAD" replace with 18) At the end of the line remove savemode="ONLOADUNLOAD" replace with 19) Save the modifications and import the modified grpassign.xml. --- APAR #: IV56359 Defect(s): 125983 Description: You cannot remove temporary labor before you add or adjust a crew assignment. Manual Changes: 1) In Application Designer, export cgrpassign.xml. Save the export to a location where you can edit them 2) Open the just-saved cgrpassign.xml in a text editor 3) Find the line that contains remove savemode="ONUNLOAD" from that line so it will look like the following 4) Repeat step 3 (remove savemode="ONUNLOAD") for the following lines 5) Save the file. 6) Import the modified xml file --- APAR #: IV46747 Defect: 130098 Description: On a worker order, the Enter by Crew start time is not displayed. Manual Changes: 1) In Application Designer, export library.xml. Save the export to a location where you can edit them 2) Open the just-saved library.xml in a text editor 3) Find the line that contains 4) Under this section, locate the line 5) Under this section and if it exists, remove the following line which contains dataattribute="scheduledate": 6) An example of what the end result would look like is:
... 7) Save the file. 8) Import the modified xml file --- ------------------------------------------------------------------------------------------- Begin IF009 ------------------------------------------------------------------------------------------- APAR #: IV59604 Defect(s): 133236 Description: The long operation dialog will now activate on the upload file control by changing the event from LOADDATA to DOLONGOP. Database Scripts: N/A Manual Changes : You must also install the IBM TPAE Integration Framework 7.5.1.0 IFIX that contains a fix for this same APAR. The long operation dialog will activate on the uploadfile control by changing the event from "loadData" to "dolongop". ------------------------------------------------------------------------------------------- Begin IF010 ------------------------------------------------------------------------------------------- APAR #: IV57308 Defect(s): 129425 Description: CREWWORKGROUP MISSED IN JOBTASK TABLE AND UI. Database Scripts: HF7520_11.dbc Manual Changes: 1) In Application Designer, export jobplan.xml and wotrack.xml. Save the exported files to a location where you can edit them. 2) Open the just exported and saved jobplan.xml in a text editor. 3) Find the line that contains 4) Add the following line under this (NOTE: the customer might want to put add this field in a different area on the UI screen) 5) Save the file. 6) Open the just exported and saved wotrack.xml in a text editor. 7) Find the line that contains 8) Add the following line under this (NOTE: the customer might want to put add this field in a different area on the UI screen) 9) Save the file. 10) Import the modified jobplan.xml and wotrack.xml files. ------ ------------------------------------------------------------------------------------------- Begin IF011 ------------------------------------------------------------------------------------------- APAR #: IV60955 Defect(s): 141498 Description: Internet Explorer 8 browser crashing when entering lines in rich text editor when using
instead of
. Database Scripts: HF7505_14.dbc Manual Changes: Added system property (webclient.richtext.blocknode) for rich text editor block node for enter key. Should be set to 'BR', 'DIV', or 'P'. Default value is 'DIV'. --- ------------------------------------------------------------------------------------------- Begin IF013 ------------------------------------------------------------------------------------------- ------ APAR #: IV63745 Defect: 145036 Description: The Download feature on the List tab contains NON-ASCII characters. Database Scripts: HF7505_20.dbc Manual Changes: Set webclient.downloadpreservewhitespace to 0 or 1, depending on whether white space should be preserved or stripped out in table download text. --- APAR #: IV60610 Defect(s): 135179 Description: In the Select Shifts dialog, the Filter option is disabled. Manual Changes: 1) In Application Designer, export scheduler.xml. Save the export to a location where you can edit them 2) Open the just-saved scheduler.xml in a text editor 3) Search on remove filterable="false" from that line so it will look like the following 4) Save the file. 5) Import the modified xml file --- APAR #: IV59870 Defect(s): 132443 Description: When you use the Select Terms button, contract terms and conditions are not displayed. Manual Changes: 1) In Application Designer, export library.xml. Save the export to a location where you can edit them 2) Open the just-saved library.xml in a text editor 3) Find the line that contains and replace the beanclass value in that line so it will look like the following 4) Save the file. 5) Import the modified xml file -------- APAR #: IV64660 Defect(s): 147376 Description: When you change the status of multiple schedule records in scheduler 7.5.2.0, an error occurs. Database Scripts: N/A Manual Changes: 1) In Application Designer, export scheduler.xml. Save the export to a location where you can edit them 2) Open the just-saved library.xml in a text editor 3) Find the line that contains and replace the beanclass value in that line so it will look like the following 4) Save the file. 5) Import the modified xml file -------- ------------------------------------------------------------------------------------------- Begin IF014 ------------------------------------------------------------------------------------------- APAR #: IV65647 Defect(s): 150702 Description: When you install interim fix 011 for Maximo 7.5.0.5, an incorrect purchase order number appears in purchase orders when you use a workflow. Database Scripts: N/A Manual Changes: Go To application - System Configuration - Platform Configuration - System Properties insert a new Global Property: property Name is mxe.routewfcleanup, any description, Global Value 1. Save. Find this new property again, select it, and perform Live Refresh. -------- APAR #: IV51794 Defect: 150373 Description: When you build a new ear file, the new images and static content for the UI skin are placed in the skins folder with a date and time stamp. Database Scripts: N/A Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add or modify the following filter-mapping section: HttpMaxAgeFilter /webclient/skins/* 3) Save file. 4) Build and redeploy ear file. --- ------------------------------------------------------------------------------------------- Begin IF015 ------------------------------------------------------------------------------------------- APAR #: IV60764 Defect: 152747 Description: In the Assets application, when you modify the start or end measure of an existing linear asset, an error occurs. Database Scripts: HF7505_27.dbc Manual Changes: 1. Go to > database configuration 2. Open up asset object 3. In relationship tab, copy/paste the where clause that's in LNRMULTIASSETLOCCIS_NOHIST to LNRMULTIASSETLOCCIS assetnum = :assetnum and siteid = :siteid and (startmeasure is not null or endmeasure is not null) and exists (select 1 from workorder wo where multiassetlocci.siteid=wo.siteid and multiassetlocci.assetnum=wo.assetnum and wo.wonum=multiassetlocci.recordkey and wo.woclass=multiassetlocci.recordclass and historyflag=0) 4. Save, log out, log back in. --- ------------------------------------------------------------------------------------------- End IF015 ------------------------------------------------------------------------------------------- APAR #: IV25347 Defect: 166503 Description: Reference point asset feature measure changes are not being propagated to the records in the related tables (for example, ASSETFEATURE, ASSETFEATURESPEC, ROUTE_STOP,and PM) that reference the modified reference point. Database Scripts: HF7505_34 Manual Changes : After running database script HF7505_34, if you want linear recalibration to be an option when modifying the start or end measures on reference point asset features, execute the following SQL update statement: update maxvars set varvalue='1' where varname='HFDOLINEARRECALIB' and orgid=''; This needs to be done manually for the IFIX because the Organizations application Asset Option 'Propagate reference point measure changes?' check box (added for future Fix Packs) cannot be implemented in an IFIX. --- APAR #: IV66553 (Reverse Change) Defect: 155814/174681 Description: CANNOT CREATE SOFTWARE CONTRACT IN REQUEST FOR QUOTATIONS. Database Scripts: N/A Manual Changes: **If previously followed the manual steps in IV66553/155814, follow these steps to reverse the regression.** 1) In Application Designer, export contsfw.xml. Save the exported file to a location where you can edit it. 2) Open the just exported and saved contsfw.xml in a text editor. 3) Find the line that contains
and replace with
5) Save the file. 6) Import the modified contsfw.xml file. ==================================================================================================== VI. Issues Resolved ==================================================================================================== -------- -------- ============================================================================================== Begin IF001 (TPAE_7505_IFIX.20131009-1053.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV46462 Issue(s): 101739 Description: Not all records available in the Person Group tab of the Select Owner dialog box download correctly. There is a hardcoded limit of 200 when you download from this list. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45460 Defect: 107103 Description: In the Inventory application, when you set the inventory Cost type to FIFO and return items, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV44907 Defect: 107594 Description: Asset Topology: Applet gets unsigned jar warning when loading the applet Database Scripts: N/A Manual Changes: 1. Remove all .gz files from applications/maximo/maximouiweb/webmodule/webclient/applets/telco/ 2. Clear Browser Cache 3. Clear Java Applet cache using the Java Control Panel (found by clicking Java Icon in the Windows Control Panel) --- APAR #: IV49836 Defect: 108108 Description: Maximo fails to recognize that the UpdateDB function must be run when new products or database scripts are added to Maximo Base. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47724 Issue(s): 107524 Description: UpdateDB fails while updating the assetmeter and locationmeter lastreading attributes with meterreading and locmeterreading readings. While running the database change script V7500_700, the following error message is displayed: ORA-01427: single-row subquery returns more than one row. This problem only affects those upgrading from 71X to 75X who use meters in a multi-language environment. While an earlier APAR IV37355 addressed this same problem when updating readings from the measurement table, this APAR addresses the same problem when updating readings from meterreading and locmeterreading tables. The fix for the earlier APAR and this APAR are in V7500_500. Database Scripts: V7500_500 Manual Changes: N/A --- APAR #: Defect: 107710 Description: In the Scheduler application, an exception is displayed on the Java console when you open the Gantt View tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect: 108109 Description: Two UpdateDB scripts take longer than 10 minutes to run when you upgrade from 7.5.0.3 to 7.5.0.5. Database Scripts: V7520_06.dbc, V7520_72.dbc Manual Changes: N/A --- APAR #: IV46701 Defect: 108602 Description: Work order generation incorrectly requires rights to work ordertracking - BMXAA0024E and BMXAA3210E Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45734 Defect: 109621 Description: In the Workview application, after you upgrade to SCCD 750, the Available Queries option is no longer displayed in the navigation panel. Database Scripts: N/A Manual Changes: N/A -------- -------- =============================================================================================== End IF001 (TPAE_7505_IFIX.20131009-1053.psi.zip) =============================================================================================== -------- -------- ============================================================================================== Begin IF002 (TPAE_7505_IFIX.20131023-1433.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV46100 Defect: 109798 Description: When you reorder an item and select the Ignore Reorder Point option and clear the Run in Background option, an error occurs when you run a report. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46480 Defect: 101827 Description: In the Work Order Tracking application, when you change the work log detail, the Modify By and Modify Date fields are not affected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49990 Defect: 108590 Description: In the Purchase Requisitions application, the Conversion Factor field is always read-only in PRs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47888 Defect: 110200 Description: You are unable to remove the Assigned Owner Group lookup from the UI. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47570 Defect: 107884 Description: In the Item Master application, when you change the status of an item to PENDOBS and the Roll New Status to Organizations and Inventory check box is selected, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50388 Defect: 109857 Description: In the Create Requisitions application, you cannot cancel a desktop requisition even though all associated PRs and POs are canceled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50275 Defect: 109715 Description: In the Invoices application, the tax on invoices is calculated incorrectly when you create a payment schedule on a contract. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48005 Defect: 110402 Description: In the Inventory application, the Auto Split dialog is displayed at incorrect times. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect: 111308 Description: The Linux runscriptfile.sh file causes an error when you try to fix security groups. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50642 Defect: 110628 Description: In the Work Order tracking application, you cannot add items to the plans tab when the status of those items is set to PENDOBS in both inventory and the item master. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect: 111422 Description: In the Scheduler application, the Scheduler/Graphical assignment and the Dispatcher applets will no longer load. Database Scripts: N/A Manual Changes: Clear Java Plugin applet cache using Java Control Panel --- APAR #: IV50371 Defect: 110374 Description: In the Report Administration application, report designs can be overwritten with default versions when a server starts. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50573 Defect: 110224 Description: In the Job Plans (Cal) application, duplicate data sheets are attached to PM generated work orders. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50466 Defect: 109968 Description: In the Crews application, the assignment status of a crew does not determine the availability for a split shift correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51067 Defect: 111548 Description: In the Inventory application, when you adjust the Current Balance field of a LIFO/FIFO item, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51113 Defect: 111419 Description: In the Scheduler application, the Capacity Planning Model does not function for crew and tool data. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50472 Defect: 109989 Description: In the Scheduler application, when you use Firefox as your browser, a code problem occurs. Database Scripts: N/A Manual changes: N/A -------- -------- =============================================================================================== End IF002 (TPAE_7505_IFIX.20131023-1433.psi.zip) =============================================================================================== -------- -------- ============================================================================================== Begin IF003 (TPAE_7505_IFIX.20131125-1226.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV46140 Defect: 102375 Description: In the Assets application, you are unable to move an asset back to an old site if there is a decommissioned location on the decommissioned asset record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49794 Defect: 108015 Description: In the Preventive Maintenance application, when a PM meter based work order is canceled, a new work order is erroneously generated when the PM work order generation cron task runs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50677 Defect: 111797 Description: When you use Microsoft Internet Explorer 10 and SCCD 7.5.5.1, if you press the enter key on the list tab you are returned to the Start Center. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50775 Defect: 111779 Description: In the Purchase Contracts application, when you add a standard service line that references a purchase contract to an invoice, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46097 Defect: 107793 Description: Maximo does not validate the Organization field in the Job Plan Tasks section. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47599 Defect: 107573 Description: In the Inventory application, STDRECADJ needs to be created for any MATRECTRANS where the unit cost differs from the standard cost. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46179 Defect(s): 111869 Description: In work Order Tracking application, You cannot attach a clipboard image to a communication. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51040 Defect(s): 111563 Description: In the Linear Assets application, when you import specifications with Maximo Integration Framework, the start and end measures are defaulted to zero. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49838 Defect(s): 108125 Description: In the Map Manager application, tabs in the map section are displayed incorrectly when the Tivoli 13 skin is used. Database Scripts: HF7520_01 Manual Changes: N/A --- APAR #: IV50324 Defect(s): 110048 Description: In the Report Administration application, the Asset Purchase Order Details report has SQL issue. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51123 Defect(s): 112059 Description: The toolbar navigation buttons are wrapped and the horizontal scroll bar does not appear in the SR application if you use Microsoft Internet Explorer. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48117 Defect: 112904 Description: In the Purchase Requisitions application, when you create a PR from a desktop requisition, the PR lines are in reverse order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51580 Defect: 113633 Description: In the Graphical Assignment application, completed assignments are displayed in the Craft row. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51664 Defect: 113796 Description: In the Scheduler application, the Compare Scenario tool does not funtion properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51185 Defect: 113849 Description: In the Inventory Usage application, when you issue an asset an error message is incorrectly displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51407 Defect: 113227 Description: In the Work Order Tracking application, the dialog box that prompts when you update a work order's GL account based on a new asset/location combination clears the Work Order GL Account field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51815 Defect: 114252 Description: In the Scheduler application, there is no vertical scroll bar on the Gantt View tab when the smart control bar is enabled. Database Scripts: N/A Manual Changes: Clear browser caches --- APAR #: IV52128 Defect(s): 115547 Description: In the Purchase Orders application, when you revise a current PO and delete a PO line that is not received, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ94759 Defect: 115211 Description: In the Asset application, the Open Drilldown action displays a random asset on a new asset record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50777 Defect(s): 115620 Description: In the Configuration Items application, restrictions do not function properly on the Change Plans tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52383 Defect(s): 115664 Description: In the Assets application, restrictions do not function properly on the Change Plans tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45594 Defect(s): 115382 Description: A rotating asset does not reset when you change the Tool field on the Work Order Actuals tab from Rotating to non-rotating. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51538 Defect(s): 114009 Description: In the Inventory application, when you import an Inventory Vendor Flat file, multiple errors occur. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50267 Defect(s): 114820 Description: In the Work Order Tracking application, the child of a work order that was generated by a route has no description. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51535 Defect(s): 114163 Description: When you run a query with ORDERBY and then run a new query, the ORDERBY command is retained for the new query. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End IF003 (TPAE_7505_IFIX.20131125-1226.psi.zip) =============================================================================================== -------- -------- ============================================================================================== Begin IF004 (TPAE_7505_IFIX.20140108-2152.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV33175 Defect: 111086 Description: When a linear asset has many feature specification values, a problem occurs when you attempt to modify the asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51665 Defect(s): 114769 Description: In the KPI Manager application, when a cron task runs more than once a day, the days on the Trend graph do not align with the collected points. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49672 Defect(s): 116220 Description: In the Scheduler application, the Gantt chart takes a long time to build regardless of the number of work orders applied. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50469 Defect(s): 109983 Description: In the Scheduler application, when a work list consists of work orders that are assigned to crew types and capacity planning is run, the Additional Capacity tab is highlighted red. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52605 Defect(s): 116237 Description: In the Asset application, the Attribute Search dialog does not refresh when an attribute is removed from the search using the trash icon. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49268 Defect(s): 107722 Description: You are able to run embedded JavaScript from a user display name field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51580 Defect(s): 116678 Description: In the Graphical Assignment application, when you complete an assignment it is incorrectly displayed in the crew type. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52690 Defect(s): 116352 Description: In the Map Manager application, the map does not display Everyplace templates when an Everyplace user is selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52549 Defect(s): 116775 Description: When you add an existing service address to a work order, an error occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV52586 Defect(s): 116184 Description: In the scheduler /Work Order Tracking application, the advanced query function has a performance issue. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV51686 Defect(s): 115572 Description: In the Assignment Manager application, Labor with Crew ID values are not defaultly displayed in the Labor list. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV52849 Defect(s): 116682 Description: On the Work List tab, when you copy a saved query, an error occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV52600 Defect: 117020 Description: You cannot transfer items from one bin to another that have APHARD or HARD reservations and whose quantity is greater than the items available balance. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV51285 Defect: 116246 Description: On the Work List tab, when you copy a saved query, an error occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV50275 Defect(s): 109715 Description: In the Invoices application, the tax on invoices is calculated incorrectly when you create a payment schedule on a contract. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52048 Defect(s): 115164 Description: After you upgrade to 7.5.0.5, applications no longer place focus in the default field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51523 Defect(s): 117657 Description: In the Purchase Requisitions application, when DE is selected as the default language, decimal separators are entered incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52258 Defect(s): 115587 Description: E-signature dialog does not display for inventory actions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49623 Defect(s): 116248 Description: In the Invoices application, the Invoice Header Cost value automatically equals the Invoice Line Cost value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52906 Defect(s): 116995 Description: In the Purchase Requisitions application, Contract fields do not clear when you return from the Contract to PR and PO Application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51546 Defect(s): 113625 Description: In the Purchase Contracts application, you are unable to approve a Down Payment invoice that is associated to a Purchase Contract Service line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51667 Defect(s): 117722 Description: In the Database Configuration application, when you sign in to Maximo with a non-English language, you cannot save changes to the DB configuration application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV41871 Defect(s): 107500 Description: In the Report Administration application, when you submit a BIRT report for execution you cannot post WHERE in plain text. Database Scripts: HF7505_02.dbc Manual Changes: N/A --- APAR #: IV53277 Defect(s): 118003 Description: In the Security Authentication application, you can create a new service record without access to the Service Address application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52930 Defect(s): 117735 Description: In the Classifications application, the Advanced Search field does not return results. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47673 Defect(s): 117747 Description: In the Work Order Tracking application, when a work order is created against an Asset with no GL account, the location GL account is not inherited. Database Scripts: N/A Manual Changes: N/A NOTE: This is already checked in with IV51407, which is in IF003. --- APAR #: IV51663 Defect(s): 116488 Description: In the Lease/Rental Contracts application, when you create an invoice an incorrect GL is generated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52584 Defect(s): 116102 Description: In Select Records mode, when you click another table row after you select a record, the table will autoscroll to the previously selected record automatically. Database Scripts: N/A Manual Changes: N/A --- APAR #: IZ87771 Defect(s): 118680 Description: After you apply base services 7.1.1.7, the Specify a File pop-up message is not clear. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53221 Defect: 117564 Description: In applications that use Java applets, after Java 1.7 update 45 is installed, new Java warnings open. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47744 Defect: 118831 Description: The Maximo UI servers hang due to thread deadlock. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53566 Defect(s): 119067 Description: In the Work Order Tracking application, when you create a WO from a PM and the Automatically Create Usage Documents for New Reservations option is selected, a null pointer error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50316 Defect(s): 113470 Description: In the Report Viewer application, when an error occurs in BIRT, it displays the server name where the error occurred and the stacktrace. Database Scripts: N/A Manual Changes: Refer to Manual Changes section --- APAR #: IV53734 Defect(s): 118799 Description: In the Scheduler application, there is a graphical crew management performance improvement. A workdate filter was added. Database Scripts: N/A Manual Changes: Refer to Manual Changes section --- APAR #: IV53733 Defect(s): 118798 Description: In the Scheduler application, there is a graphical crew management performance improvement. Indexes were added. Database Scripts: N/A Manual Changes: Refer to Manual Changes section --- APAR #: IV53461 Defect(s): 118134 Description: In the Work Order Tracking application, Maximo allows the status of WOs to be changed on completed WOs when the dynamic check asset function is not completed. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End IF004 (TPAE_7505_IFIX.20140108-2152.psi.zip) =============================================================================================== -------- -------- ============================================================================================== Begin IF005 (TPAE_7505_IFIX.20140207-1756.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV53735 Defect(s): 118800 Description: The calendar does not filter by display dates. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40118 Defect(s): 119450 Description: In the Purchase Order application, when you revise a PO that has a received quantity greater than the ordered quantity, a warning occurs and you cannot save the revision. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 119431 Description: Add data bean for template lookup in create scenario dialog to handle custom optimization model. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53936 Defect(s): 119693 Description: In the Stocked Tools application, there is no Current balance action in the More actions menu. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53425 Defect(s): 118000 Description: In the Graphical Assignment application, when you create a work order from the Gantt view a Please Wait message displays and does not go away. Database Scripts: N/A Manual Changes: Clear browser and Java Applet Caches --- APAR #: IV53308 Defect(s): 117867 Description: In the Calendars application, date calenders and date calculations are incorrect when a date beyond 2050 are selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54023 Defect(s): 119992 Description: In the Graphical Assignment application, when you view a work list in Gantt view, the system hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51781 Defect(s): 114861 Description: In the Migration Manager application, compressed files generated and stored in a /tmp folder do not download correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52386 Defect(s): 115848 Description: In the Purchase Orders application, you can close a PO when the status is set to PNDREV. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43083 Defect(s): 120568 Description: Maximo allows two purchase order lines to be saved with the same line number. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51662 Defect(s): 113791 Description: When you run a lookup on alphanumeric values in an Attribute Search, the lookup shows every ALN domain value in the system. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV54410 Defect(s): 120674 Description: In the Graphical Assignment application, when you run an Optimization action on a work list, an error occurs. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV50875 Defect(s): 119837 Description: In the Invoices application, when you enter a value in the Total Tax field, an error occurs. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV54342 Defect(s): 120561 Description: In the Graphical Assignment application, when you request an Optimization-Labor or Spatial scenario, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54610 Defect(s): 121847 Description: In the Graphical Crew Management application, a problem exists in the AMCREWLABPOS code. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50291 Defect(s): 120683 Description: In the Purchase Order application, when you revise a partial receipt by lowering the quantity of a line, the cost is calculated incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48028 Defect(s): 121868 Description: In the Purchase Requisitions application, the GL navigator does not work for default table data until a new row is selected for the PR and PO application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27843 Defect(s): 117718 Description: In the Inventory application, when an item is referred in a revised purchase order, you cannot change the status to obsolete. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54355 Defect(s): 122007 Description: In the Create Requisition application, you cannot select a value from the Select Value list. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54698 Defect(s): 122149 Description: SQL Injection. Database Scripts: HF7505_03.dbc Manual Changes: N/A --- APAR #: IV54293 Defect(s): 122045 Description: In the Service Address application, when you add a service address and select the ok button, a red X displays. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53736 Defect(s): 119373 Description: There is an incorrect Login Tracking event that causes Logout to display as Timeout and Timeout to display as Logout. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53555 Defect(s): 119525 Description: When you compare dates with an alternative locale setting, color alerts do not function properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48137 Defect(s): 111054 Description: In the Application Designer application, when you use Microsoft Internet Explorer, Maximo is slow and sometimes hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54850 Defect(s): 122409 Description: In the Graphical Crew Management application, the Drag Assignment Save action is slow. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54853 Defect(s): 122415 Description: In the Graphical Crew Management application, there is a recursive SETSTATUSFROMASSIGNEDASSETS element. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54441 Defect(s): 121898 Description: In the Work Order tracking application, the Select Action menu options are unavailable after a BMXAA2318E error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54344 Defect(s): 120562 Description: In the Graphical Assignment application, when you sign in with a Time Zone field set and run an Optimization action, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55019 Defect(s): 122850 Description: In the Report Viewer application, a CUSTOMERREPORT.JSP has a reflected XSS. Database Scripts: N/A Manual Changes: See manual changes section. --- APAR #: IV45731 Defect(s): 122873 Description: When you use a language other than English, you are unable to update the Start Center KPI graph. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54969 Defect(s): 122841 Description: In the Inventory application, when an item is transferred between stores in different organizations, incorrect balances are created in the Inventory Cost table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53275 Issue(s): 117848 Description: In the Work Order Tracking application, when you create a work order and choose an asset, the GL account is not populated from the Location object. Database Scripts: N/A Manual Changes: N/A NOTE: Fixed in this IFIX release by APAR IV47673/117747. -------- -------- ============================================================================================== End IF005 (TPAE_7505_IFIX.20140207-1756.psi.zip) =============================================================================================== -------- -------- ============================================================================================== Begin IF006 (TPAE_7505_IFIX.20140301-0800.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV52583 Defect(s): 116697 Description: The Rich Text Editor font size does not stick after you add a row and hit enter. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54698 Defect(s): 122149 Description: In the View Requisition application, PO records related to PRs display an incorrect status when revised. Database Scripts: HF7505_03.dbc Manual Changes: N/A --- APAR #: IV55080 Defect(s): 123120 Description: You can approve a PR when it is associated to a canceled requisition. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51531 Defect(s): 122296 Description: When you remove the autokey default value for a PO number, a PO revision does not work correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54291 Defect(s): 121629 Description: In the Work Order Tracking application, when the start timer is selected before midnight and the stop timer is selected the next day, the regular labor hours are not calculated correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53956 Defect(s): 120039 Description: In the Map Manager application, when you use local geocode instead of the default URL, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54674 Defect : 122950 Description: There is not a separate security option for header options of a portlet for a graph. Database Scripts: HF7505_04.dbc Manual Changes: A new sigoption called SHOWPORTLETDETAILS was added to the Start Center application. If the result set portlets do not have Read/Modify rights, by default, the user cannot change the portlet options. The links to bring up the portlet options dialog can be displayed on the portlet by granting access to this new sigoption. --- APAR #: IV55227 Defect(s): 123132 Description: In the Invoices application, when you approve an invoice and the PO has fractions, Maximo create an extra material receipt entry with negative line costs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47421 Defect(s): 123432 Description: The Favorite Application portlet does not remove application reference when security rights are removed. Database Scripts: HF7505_05.dbc Manual Changes: Set system property "webclient.hideUnauthorizedFavoriteApps" to "1" to hide unauthorized applications from favorite applications portlet. --- APAR #: IV53428 Defect(s): 118004 Description: Data that is entered on the Tools table of Maximo Everyplace appears in the resource section of Scheduler. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55072 Defect(s): 123047 Description: In the Purchase Requisitions application, there are inconsistencies between the Create PO button and the Create Contract button on the Quotations tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52401 Defect(s): 115719 Description: In the Graphical Assignment application, the Gantt view does not automatically refresh when you assign a work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52439 Defect(s): 123335 Description: When you set up a result set portlet and enter a value in the Display By field, the field reverts to its previous value when you save the portlet. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53625 Defect(s): 118667 Description: In the Purchase Orders application, you can enter in a valid location that is not a storeroom on a PO line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54922 Defect(s): 122725 Description: In the Work Order Tracking application, data sheets are not attached to a work order when a calibration asset and a calibration job plan are attached to the work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52952 Defect(s): 123698 Description: In the Locations application, when you import a location into a NETWORK system that is associated to more than one parent, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55320 Defect(s): 123704 Description: When a PO is revised and then the revision is canceled, the canceled lines appear in the Copy PO LInes function dialog when the PO is invoiced. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46077 Defect(s): 123815 Description: All of the doubles byte characters that are specified in the Attribute column are deleted when you surpass the maximum number of characters in a line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51440 Defect(s): 123942 Description: Attached files with special characters in the name will not open. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Defect(s): 124062 Description: In the Scheduler application, when you use Firefox, some Smart Cloud Control Desk panels fail to load due to errors in the Java Console. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54134 Defect(s): 120859 Description: Chinese characters use din report parameter values are passed on to reports as question marks. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55634 Defect(s): 124165 Description: When you duplicate a job plan with an attribute, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46438 Defect: 124395 Description: The calendar does not update time fields correctly. Database Scripts: HF7505_06.dbc Manual Changes: Set the system property webclient.useClientTimer to "1" to use a client side timer to adjust the default time on Date/Time Calendar widgets. --- APAR #: IV49801 Defect: 124178 Description: The Tools/Organization details dialog box does not show all organizations. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54787 Defect: 122769 Description: When you delete the Work Order Number field on the Inventory Usage line, it reappears after you save. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54693 Defect: 122995 Description: When you perform an inventory adjustment and a transfer across sites, the balance of items is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55172 Defect: 124621 Description: In the Service Requests application, the Quick View function is not available. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54874 Defect: 124192 Description: In the Preventive Maintenance application, data sheets display on a work order multiple times. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55803 Defect: 125094 Description: FIFO cost does not include tax in the issue cost field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55370 Defect: 123505 Description: When you list all records in an application list tab, the sort application function does not function properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55901 Defect(s): 124665 Description: In the Map Manager application, when the map server cannot be reached there is no error message in the log file notifying the user of the problem. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56036 Defect(s): 125206 Description: In the Inventory application, when you run the Inventory Adjustments Reconcile Balances action from the List tab for items with FIFO or LIFO cost type, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55985 Defect(s): 125092 Description: In the Invoices application, you can invoice an item quantity that is greater than the received item quantity. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55844 Defect(s): 124847 Description: In the Inventory application, the reorder quantity is not being set correctly when items exist in different storerooms. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End IF006 (TPAE_7505_IFIX.20140301-0800.psi.zip) =============================================================================================== -------- -------- ============================================================================================== Begin IF007 (TPAE_7505_IFIX.20140402-1137.psi.zip) ============================================================================================== -------- -------- --- APAR #: IV53957 Defect(s): 120054 Description: In the Map Manager application, when you use local geocode instead of the default URL, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54069 Defect(s): 122262 Description: In the Map Manager application, when a map service does not have the visible option selected, the Map tab does not center a selected record on the spatial map. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55714 Defect(s): 124317 Description: In the Work Order Tracking application, when the Preventive Maintenance Work Order Generation process generates a record, the Target Start Date and the Target Comp Date contain milliseconds. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55183 Defect(s): 123928 Description: In the Purchase Orders application, when a desktop requisition is associated with a revised purchase order, you cannot change the status of the requisition from approved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55585 Defect(s): 125470 Description: In the Invoices application, you are unable to create an invoice for a purchase order with multiple versions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56115 Defect(s): 125571 Description: When you log in, the KPI portlets refresh, and the home page loads slowly. Database Scripts: HF7505_07.dbc Manual Changes: N/A --- APAR #: IV51372 Defect(s): 117976 Description: In the Report Administration application, the Projected PM Labor Requirements report has an invalid SQL. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52157 Defect(s): 121588 Description: In the Report Administration application, the Cost by System report converts the date and time that is based on your timezone in a field search that does not have a time element. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56223 Defect: 125566 Description: In the Issues and Transfers application, when you use the Transfer Out tab from a storeroom, the last receipt cost and average cost are not updated correctly. Database Scripts: N/A Manual Changes: N/A --- Apar #: IV51858 Defect(s): 114941 Description: In the Purchase Orders application, when you set the status of a purchase order to CLOSED, the purchase order does not close. It remains in APPROVED status. Database Scripts: N/A Manual Changes: N/A --- Apar #: IV51698 Defect(s): 125947 Description: In the Attached Documents application, the system is unable to acces document links with a UNC path. Database Scripts: N/A Manual Changes: N/A --- Apar #: IV56224 Defect(s): 125873 Description: In the Work Order Tracking application, when you enter a value in the Labor Rate field and tab out, the field is cleared. Database Scripts: N/A Manual Changes: N/A --- Apar #: IV56352 Defect(s): 125975 Description: When you set the webclient.defaultbutton property to 0 or false, the default buttons are not disabled. Database Scripts: N/A Manual Changes: N/A --- Apar #: IV56447 Defect(s): 126450 Description: When you add a FIFO item to a purchase requisition, the GL debit account is not from inventory. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55492 Defect(s): 126682 Description: When asset specifications contain common attributes between new and old classifications, asset descriptions are not generated correctly through Maximo Integration Framework. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47941 Defect(s): 126772 Description: When you use the Field Detail menu to go to another application, you cannot scroll horizontally. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40118 Defect(s): 119450 Description: When you revise a purchase order that has a received quantity greater than the quantity ordered, a warning message is displayed, and you cannot save the revision. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55915 Defect(s): 125286 Description: In the Purchase Orders application, there are inconsistencies with purchase order storeroom and conversion lines. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54567 Defect(s): 122259 Description: In the System Object application, an invalid "Where clause" information report is sent to the Birt reports. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56850 Defect(s): 126934 Description: In the Attribute Search dialog, when you try to delete and undelete an attribute used by the search, the error message,"BMXAA4050E - The record that you are trying to delete cannot be deleted because another record with same key exists," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52674 Defect(s): 125557 Description: In Assets application, when you change an item number with specifications to an item number without specifications, the error message, "BMXAA2256E: Field Classification is read-only," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56827 Defect(s): 127476 Description: In the Locations application, when you try to add a primary system to a site with one or more systems, the error message, "BMXAA2714E - Each site must have 1 primary system" is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56826 Defect(s): 127605 Description: In the Work Order Tracking application, you can change the status of a work order from a history status to a WSCH status through a work flow Change Status action that is associated with a manual input node. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52344 Defect: 115872 Description: In the Organizations application, the inventory Quantity Available field allows a negative value. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV56722 Defect(s): 127118 Description: When you revise a purchase order and change a PO line to refelct a different purchase requisition, the purchase order references an old purchase requisition. Database Scripts: HF7505_08.dbc Manual Changes: N/A --- APAR #: IV56775 Defect(s): 127613 Description: In the Issues and Transfers application, when you transfer items between storerooms, if the inserted default site is different from the storeroom site, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55228 Defect(s): 125899 Description: In the Inventory application, when you do not have a storeroom that is assigned, the Re-Order dialog screen displays an invalid binding. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55514 Defect(s): 123798 Description: In the Service Requests application, you cannot update the Asset field on a service request with the Asset Drilldown dialog option. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54605 Defect(s): 122181 Description: In the Receiving application, if you enter material on a PO line with a quantity and line cost, the unit cost is calculated. If that purchase order is received and returned, the line cost on the return transaction is calculated incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56759 Defect(s): 127164 Description: In the Labor Rate Contracts application, the craft is not validated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56630 Defect(s): 127699 Description: In the Base Instance class, when the initProperty method is triggered before any other methods are called, a null pointer exception occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56875 Defect(s): 127671 Description: In the Quick Reporting application, when you re-issue a rotating asset that has already been returned, the error message, "BMXAA2054E error when re-issueing an item that was returned," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55389 Defect(s): 128057 Description: In all applications, the e-signature ID is not cleared before the next transaction. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47282 Defect(s): 122203 Description: In the Migration Manager application, when the MAXINTOBJALIASUNIQUE indexes are missing due to duplicate data, a null pointer exception error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47577 Defect(s): 126887 Description: In the Migration Manager application, the database comparison fails with a java.sql.SQLE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56294 Defect(s): 126039 Description: When you create an internal purchase order with multiple PO lins, separate inventory usage documents are created for each PO line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV43534 Defect(s): 128073 Description: In the Calendars application, holidays and working hours are not applied correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 127796 Description: In the Scheduler application, when you filter multiple times on the Gantt View Java applet, performance problems occur. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57437 Defect(s): 128431 Description: When you use the work flow to approve a purchase order, when you revise the purchase order, delete a PO line, and save, an incorrect purchase order is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57388 Defect(s): 128509 Description: In the Job Plans application, when you enter a search in the Job Plans Lookup field, an error occurs, and there are nested job plans. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56755 Defect(s): 127439 Description: In the Work Order Tracking application, the item number for materials with a negative balance is not listed, and the error message, ""BMXAA1892E - the balance in the bin will become a negative as a result of this transaction." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57477 Defect(s): 128632 Description: In the Domains application, when you create a requisition, the error message, "BMXAA0234E - Not a valid site error received when selecting a value from a user created domain in the Create Requisition application," is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57727 Defect(s): 128738 Description: In the Database Configuration application, when related tables are copied automatically, the priorities set differently. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55983 Defect(s): 125223 Description: If you reference an item in a revised purchase order, when you change the status of the item to obsolete, the error message, "BMXAA2121W - This status change will make the item(s) permanently unavailable for use. Do you wish to continue?" is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57445 Defect(s): 128398 Description: In the Graphical Assignment application, when you are in the Gantt View, the Shift value is empty. When you reenter a Shift value, the field remains empty. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55903 Defect(s): 125580 Description: In the Scheduler application, the Reforecast Subsequent Dates check box is automatically cleared. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56644 Defect(s): 128618 Description: When you click on the KPI, the Start Center breaks and access is restricted to the KPI Manager application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53190 Defect(s): 128760 Description: When you use the date lookup for the Date or Time fields, the calendar menu pops up, and you must select a date and time to continue. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54701 Defect(s): 128750 Description: In the Location application, when you are in the List tab, the Search field does not work correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50298 Defect(s): 128672 Description: In the Work Order Tracking application, when you have two tasks in a change, you can set the predecessor to each other and a loop error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56824 Defect(s): 128529 Description: In the Condition Monitoring application, when you enter a measurement value on a measure point, the last meter reading on a location meter is not updated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57390 Defect(s): 129127 Description: In the Work Order Tracking application, in the Actuals and Plans tabs, when you enter a measurement on a task after the Inspector value is set, the values are not applied correctly. Database Scripts: N/A Manual Changes: N/A --- --- APAR #: IV55744 Defect(s): 125292 Description: When you place your cursor on read-only multi-line fields, the cursor scrolls to the bottom of the record and selects all of the text in the fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57437 Defect: 128431 Description: In the Purchase Orders application, when you approve a purchase order in a work flow and revise it, when you delete the purchase order line and save, an incorrect purchase order is displayed. Database Scripts: N/A Manual Changes: N/A -------- -------- ============================================================================================== End IF007 (TPAE_7505_IFIX.20140402-1137.psi.zip) =============================================================================================== =============================================================================================== Begin IF008 (TPAE_7505_IFIX.20140512-1457.psi.zip) =============================================================================================== APAR #: IV56705 Defect(s): 128641 Description: When you change the unit cost of an LIFO/FIFO Invoice Line item, Maximo does not update the price for the remaining items in the inventory. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53627 Defect(s): 128188 Description: In a PO Cost table, the GL account is null. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56359 Defect(s): 125983 Description: You cannot remove temporary labor before you add or adjust a crew assignment. Manual Changes: 1) In Application Designer, export cgrpassign.xml. Save the export to a location where you can edit them 2) Open the just-saved cgrpassign.xml in a text editor 3) Find the line that contains remove savemode="ONUNLOAD" from that line so it will look like the following 4) Repeat step 3 (remove savemode="ONUNLOAD") for the following lines 5) Save the file. 6) Import the modified xml file --- APAR #: IV55093 Defect(s): 123230 Description: You cannot load classifications that have the same classification ID and hierarchy paths for different organizations. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51205 Defect(s): 129524 Description: In the Assets application, you cannot save asset with rotating item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53457 Defect(s): 123646 Description: When you save a work order twice, an error occurs the second time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53542 Defect(s): 126297 Description: Cron tasks do not update the Work Order Material status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59012 Defect(s): 129778 Description: When the MXE.DOCLINK.SECUREDATTACHMENT property is set to true, the + character is eliminated from an attachments name. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54557 Defect(s): 130032 Description: When the default language is set to German, you cannot duplicate an escalation. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV27819 Defect(s): 127429 Description: When you create a query, the system appends the list of labor codes that the user has rights to. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52531 Defect(s): 130042 Description: When you use the Maximo Integration Framework importing preview mode, Maximo Integration Framework inserts records in the License application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57463 Defect(s): 128774 Description: When you use the Configure Type-Ahead Autofill function, the order of the domain attributes is the opposite of how they were entered into the application designer. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57301 Defect(s) : 130052 Description: When an informational icon is displayed to notify a user of a problem, you cannot select the icon to display a message box. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52567 Defect(s) : 130116 Description: When you attach an RTF file in a record, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58910 Defect(s): 130149 Description: The Maximo Integration Framework opens closed POs if it is sent with revisions with a status of approved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58753 Defect(s): 129662 Description: In the Work Order application, Non-Stocked Item Selection overwrites Stocked Item descriptions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56849 Defect(s): 130639 Description: When you add parent locations with the Maximo Integration Framework, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55477 Defect(s): 123753 Description: When you apply fix pack 7.5.0.5, the updatedb fails if the Asset and Asset Description properties are set in Gantt View properties. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57243 Defect(s): 128120 Description: When you define an item as FIFO and you capitalize it, an incorrect cost is populated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59061 Defect(s): 130917 Description: When a revised PO with a new PO line is approved, PO receipts are not adjusted to partial. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59120, IV49769 Defect(s): 130817 Description: The GL Navigator dialog displays incorrect or incomplete data to users. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59297 Defect(s): 130745 Description: In the Inventory Usage application, the Line Cost Calculation for returned transactions is not correct. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56879 Defect(s): 130069 Description: In Maximo 7.5.0.5, the date variable that is used in automation scripts no longer returns expected values. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56424 Defect(s): 126478 Description: When you remove a PR line from a revised PO, it cannot be selected again. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59359 Defect(s): 130892 Description: When you change multiple PMs at the same time and change some PMs to an active status, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55067 Defect(s): 130893 Description: When you select the Cancel button, the Detail menu is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59388 Defect(s): 131019 Description: The Rich Text Update utility crashes with large data sets. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Defect(s): 131195 Description: Scheduler UI performance fixes Database Scripts: HF7520_06 Manual Changes: N/A --- APAR #: IV46749 Defect(s): 130100 Description: When you use the Enter Time By Crew option to enter a line on a work order, all labor for all listed work orders is updated. Database Scripts: HF7520_05.dbc Manual Changes: N/A --- APAR #: IV57104 Defect(s): 130960 Description: The WEBCLIENT.WRAPLENGTH system property is ineffective. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55354 Defect(s): 131259 Description: You can create a revision of a contract and set it to closed without it ever being approved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45765 Defect(s): 131482 Description: The Take Ownership option for multiple work orders does not ask for confirmation. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53952 Defect(s): 120429 Description: The Attribute restriction does not work when the restriction is added to a second security group associated with the same user. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53363 Defect(s): 129815 Description: When PKG is enetered in the To Storeroom field, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59612 RTC defect: 131598 Description: Need a way not to set the Modified column in SKDActivity. Database Scripts: HF7520_07 Manual Changes: N/A --- APAR #: RTC defect: 131606 Description: Commit call get Model twice which bring bad performance. Database Scripts: N/A Manual Changes: N/A --- APAR #: RTC defect: 131616 Description: Perf: Improve save and commit performance. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58677 Defect(s): 129404 Description: When you clear the Will Be Custodian option on an asset and then reselect it after saving, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59512 Defect(s): 131518 Description: PMR 46787,7TD,000 Move/Swap/Modify Dialog checkboxes UI issue Description: In the Changes and Work Order applications, in the Move/Swap/Modify dialog, if you set more than one user as the Will Be Primary custodian, you are not notified that only one user can be Manual Changes: N/A --- APAR #: IV53795 RTC defect: 119229 Description: PROBLEM WITH THE ENTER BY CREW BUTTON UNDER THE EVERYPLACE APPLICATIONS - TECH TABLET, TECH PHONE AND TECH LITE. a primary custodian. Manual Changes: N/A --- APAR #: IV59308 RTC defect: 130855 Description: LABOR TRANSTYPE ON TRANSACTIONS NOT FUNCTIONING CORRECTLY IN EVERYPLACE TECHNICIAN APP. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59168 RTC defect: 131410 Description: DUPLICATED SCHEDULER IS NOT VISIBLE IN THE SCHEDULER LIST TAB. Database Scripts: N/A Manual Changes: N/A --- APAR #: RTC defect: 131796 Description: Return from wotrack applink is slow. Database Scripts: N/A Manual Changes: N/A --- APAR #: RTC defect: 131822 Description: Improve performance for Discard Changes and Refresh. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect(s): 131925 Description: Perf - Cached groupdatainfo for all scheduler apps and cache wombomap for GAM Database Scripts: N/A Manual Changes : N/A --- APAR #: Defect(s): 131937 Description: Perf - No need to save when user clicks cancel on change status dialog in Scheduler and Graphical Assignment applications. Database Scripts: N/A Manual Changes : 1) Export the scheduler.xml using Application Designer. Save this export in a location where you can edit it. 2) Open the just-saved scheduler.xml in a text editor. 3) Search for - replace with 5) Search for - replace with 7) Search for - replace with 9) Search for - replace with 11) Save the modifications and import the modified scheduler.xml. 12) Export the grpassign.xml using Application Designer. Save this export in a location where you can edit it. 13) Open the just-saved grpassign.xml in a text editor. 14) Search for - replace with 16) At the end of the line remove savemode="ONUNLOAD" replace with 17) At the end of the line remove savemode="ONUNLOAD" replace with 18) At the end of the line remove savemode="ONLOADUNLOAD" replace with 19) Save the modifications and import the modified grpassign.xml. --- APAR #: Defect(s): 131950 Description: Perf - Cache model on backend to improve performance of applink in scheduler application. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV47488 Defect(s): 131326 Description: When specific details are entered in in the ACCOUNTDEFAULTS object, the values in the Remarks field shift to other fields. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV52251 Defect(s): 131496 Description: You cannot create new PMs with certain language and locale setting combinations. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV57469 Defect(s): 128651 Description: When you change an Item Master status to PENDOBS, you cannot to complete a direct charge purchase order. Manual Changes: N/A --- APAR #: IV59168 Defect(s): 131410 Description: In the Scheduler List tab, you cannot view a duplicated scheduler. Manual Changes: N/A --- APAR #: IV34267 Defect(s): 128417 Description: You can create two users with the same email written in lower or upper case. Manual Changes: N/A --- APAR #: IV53795 Defect(s): 119229 Description: When you use the Enter by Crew button to report actual values, the button does not work. Manual Changes: N/A --- APAR #: IV59308 Defect(s): 130855 Description: When you enter a Time by Crew value for a transtype, all labor transactions default to the most recent transtype value. Manual Changes: N/A --- APAR #: IV56375 Defect(s): 128576 Description: When you use the Application Import function to import assets, the Application Import dialog hangs with an Internal Server error. Manual Changes: N/A --- APAR #: IV59247 Defect(s): 130458 Description: In the Scheduler application, when you click the Calculate Cost button on the Work Cost tab, the error, "BMXAT0048E - The activities did not populate. For more information, check the Maximo log file (in your application server directory) or contact your system administrator," is displayed. Manual Changes: N/A --- APAR #: IV39707 Defect(s): 128868 Description: When a service is returned on a revised purchase order, the receipts show that the purchase order is complete. Manual Changes: N/A --- APAR #: IV58823 Defect(s): 130253 Description: You cannot update the status of a work order to a synonym of WAPPR such as WPLAN. Manual Changes: N/A --- APAR #: IV56358 Defect(s): 125980 Description: When you use the ACA to add a temporary labor GCMPOST driver, the newly added labor is not listed on the ACA page, or on the resource chart of the Graphical View. Manual Changes: N/A --- APAR #: IV45765 Defect(s): 131482 Description: In the Work Order Tracking application, you can take ownership of multiple work orders, and the system will not ask for confirmation. Manual Changes: N/A --- APAR #: IV52999 Defect(s): 117176 Description: When a crew has assigned labor with modified availability, you can set the status of the crew and its labor to OK. Manual Changes: N/A --- APAR #: IV20930 Defect(s): 130022 Description: When you run the Integrity Checker, fields are removed. Manual Changes: N/A --- APAR #: IV56354 Defect(s): 125977 Description: When you right click on a crew from the Graphical view, an error occurs with the Java log. Manual Changes: --- APAR #: IV59612 Defect(s): 131598,146835 Description: When you retrieve a work order from the database, you must set the Modified column in the SKDActivity. Manual Changes: N/A --- APAR #: IZ72757 Defect(s): 129917 Description: In a work flow, you cannot create a record via the RMI. Manual Changes: N/A --- APAR #: IV56862 Defect(s): 128652 Description: In the Work Order Tracking application, when you set a rule on a calibration work order, no warning message is displayed and validation of the tools does not occur. Manual Changes: N/A --- APAR #: IV46747 Defect: 130098 Description: On a worker order, the Enter by Crew start time is not displayed. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV46748 Defect: 130097 Description: When you create a tool transaction, it is filed against an incorrect work order. Database Scripts: N/A Manual Changes: N/A --- =============================================================================================== End IF008 (TPAE_7505_IFIX.20140512-1457.psi.zip) =============================================================================================== =============================================================================================== Begin IF009 (TPAE_7505_IFIX.20140616-1128.psi.zip) =============================================================================================== APAR #: IV46747 Defect: 130098 Description: In the Work Order Tracking application, when you use the Enter Time by Crew option and refresh the dialog, work orders are listed with no start times displayed. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV56845( include IV50355) Defect: 130239 Description: In the Quick Reporting application, extra tasks are created if you create more than six tasks. Database Scripts: N/A Manual Changes: see manual changes section --- APAR #: IV47809 Defect: 131891 Description: In the Communication Templates application, commas are replaced by periods in email communications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59596 Defect: 131638 Description: When you manually add a ship date in the Create Shipment dialog box, an error occurs when an appropriate date is entered. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59616 Defect: 131561 Description: When you reconcile an inventory adjustment across sites after a receipt of transfer, the quantity that is transferred is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57436 Defect: 128709 Description: In the Reports application, when the cost of the Inventory Balance report is set to FIFO, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV40436 Defect: 132177 Description: No WOs or PMs appear in the Open Work Orders and PM report. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59580 Defect: 131834 Description: The serial number of an asset is not displayed when you receive a shipment. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59577 Defect: 131278 Description: After you upgrade to version 6, when you add an inventory non-stock item to a desktop requisition or purchase requisition, a direct issue line is created. Database Scripts: HF7505_10.dbc Manual Changes: N/A --- APAR #: IV57286 Defect: 131485 Description: Quotation marks are added into the email address of role recipients when multiple users exist. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59834 Defect: 132570 Description: If you create a release PO from a software contract, values are not carried over. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59653 Defect: 131753 Description: In the Asset application, the cost of an asset does not include tax in the issue cost field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56811 Defect: 130104 Description: When a classification is first associated to a job plan, the ORGID and SITEID attributes are changed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59183 Defect: 130180 Description: You can change the status of a location to DECOMMISSIONED when the location is present on an open work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60099 Defect: 132794 Description: In the Usage application, when you transfer items, the default TOBIN field is not populated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59202 Defect: 130426 Description: In the Inventory Balances section of the Inventory application, you can add new rows to an item when an item is at a PENDING status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56557 Defect: 126792 Description: When you perform the Reconcile Balances action, the Staged Balance field is not considered into the current balance. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60029 Defect: 132717 Description: When you select the Open Drilldown option from the ROTASSETNUM field, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59639 Defect: 132252 Description: When you apply some configuration changes, an incorrect error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59387 Defect: 131169 Description: When you enter carriage returns in the Long Description field, Microsoft Internet Explorer crashes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49956 Defect(s): 133401 Description: In the Asset Specifications tab, you cannot update the Value field when a vale of NULL is entered. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59499 Defect(s): 133008 Description: RFG fields remain editable when the status of the RFQ is set to CLOSED, COMP, or READY. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV60190 Defect(s): 133868 Description: In the Create Requisitions application, the MR.PRIORITY always defaults to 1. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV55659 Defect(s): 133233 Description: When you use the Direct Print button, attachments to the record are also printed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59604 Defect(s): 133236 Description: The LongOp dialog on the External System application is a requirement. Database Scripts: N/A Manual Changes : You must also install the IBM TPAE Integration Framework 7.5.1.0 IFIX that contains a fix for this same APAR. The long operation dialog will activate on the uploadfile control by changing the event from "loadData" to "dolongop". --- APAR #: IV59890 Defect(s): 132562 Description: Rich Text entries are incorrect in the Long Description field when you use Microsoft Internet Explorer. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV55678 Defect: 126857 Description: The move/modify swap option does not work when use a replacement asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60285 Defect: 133536 Description: Maximo's parent table's unique ID column length does not match the child table's unique ID column length. Database Scripts: HF7505_11.dbc Manual Changes: N/A --- APAR #: IV59863 Defect: 132149 Description: In the Scheduler application, the histogram on the Resource Hours and Availability tab is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect: 134402 Description: On the Resource view of the Gantt chart, the Load bars are not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: Defect: 134403 Description: Cache Resource data was adjusted for better performance. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55613 Defect: 125839 Description: The view release costs function in contracts does not display the release information if the release is INPRG. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55687 Defect: 124151 Description: Work order material costs are incorrect when you use LIFO and FIFO cost types. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60467 Defect: 134124 Description: When you select the Host Name button on the Detail menu, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54010 Defect: 133521 Description: The email notification for a PM completion does not populate the Site or Date fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57376 Defect: 130105 Description: When an exchange rate for a foreign currency is applied to a PO and then a return is attempted after a receipt, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60766 Defect: 134937 Description: When you cancel a workflow step, the PO object is redirected to the first record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60737 Defect: 134936 Description: When you run the TDTOOLKIT, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #:IV60319 Defect: 134231 Description: When you receive a shipment with an item with an issue, the Order Unit value is blank on the Shipment line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47024 Defect: 135108 Description: When you use SmartCloud Control Desk in Hebrew and open dialogs, you cannot move the dialog boxes left and right. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59566 Defect: 131117 Description: When you use the Add/Modify Reservations option, the default account is not populated for a Location. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56537 Defect: 128795 Description: In the Preventive Maintenance application, when the PM.USETARGETDATE is set as no, forecasts are calculated incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60898 Defect: 135195 Description: In the Service Request application, you cannot select an asset from the Drilldown dialog in the Multi-Assets Location CI area. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60512 Defect: 134149 Description: When you process 10000 - 12000 reservations in the InvReservationResTypeUpdate CronTask, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60684 Defect: 135011 Description: When you make a change in a default query, the change does not take effect until you log out and back in Maximo. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56729 Defect(s): 128633 Description: When the REPORTOUTPUTCLEANUP cron task runs, the application server runs out of memory. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV20929 Defect(s): 131294 Description: When you open the Drilldown from the Location field, the Drilldown does not open to the Location tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56342 Defect(s): 130041 Description: When you use the Assignment Manager to finish assignments on multiple jobs, if you select multiple jobs at once, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV17345 Defect(s): 134809 Description: You cannot approve an invoice for a quantity that is more than the quantity on the PO Line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53615 Defect(s): 129606 Description: The Translation Data Toolkit blindly updates related domains which causes the process to take a long time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59863 Defect(s): 132149 Description: In the Scheduler application, when you allocate planned labor hours on the Resource and Availability tab, the histogram is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56764 Defect(s): 127724 Description: The activity list in the Work Order Detail report is returning a blank output. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV25295 Defect(s): 135084 Description: The Data Sheet As Left status does not set to the default value specified in the domain and instead uses a synonym name. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61176 Defect(s): 136198 Description: When an SLA hold is applied to a ticket that has a TICKETUID greater than 999, a message error is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60017 Defect(s): 134977 Description: Labels in Report Request pages are misaligned with the corresponding text fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59983 Defect(s): 132720 Description: Whenever a Parent Work Order with multiple Child Work Orders is generated from a PM with a Route, an error message is received. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59512 Defect(s): 131518 Description: In the Changes and Work Order applications, in the Move/Swap/Modify dialog, if you set more than one user as the "Will Be Primary custodian", you are not notified that there can only be one user Database Scripts: N/A Manual Changes: N/A -- APAR #: IV56845 Defect: 130239 Description: In Quick Reporting a new task is created in WAPPR if there are more than 6 tasks already created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60467 Defect: 134124 Description: Syntax error in conditional expression manager for "HOST NAME" keyword Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54876 Defect: 130115 Description: Partial E-Mails created via the Create Communication in SR/Incident/Problem/Activities are sent incomplete. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53363 Defect(s): 129815 Description: When PKG is enetered in the To Storeroom field, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57388 Defect(s): 128509 Description: In the Job Plans application, when you enter a search in the Job Plans Lookup field, an error occurs, and there are nested job plans. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56342 Defect(s): 130041 Description: When you finish multiple assignments in the assignment manager, it fails and an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61400 Defect(s): 136568 Description: When you reopen the Gantt chart after you save assignments in the Graphical Assignment application, information is not refreshed. Database Scripts: N/A Manual Changes: N/A --- =============================================================================================== End IF009 (TPAE_7505_IFIX.20140616-1128.psi.zip) =============================================================================================== =============================================================================================== Begin IF010 (TPAE_7505_IFIX.20140710-1551.psi.zip) =============================================================================================== APAR #: IV52148 Defect: 135633 Description: When a PM is associated with both a forecast and a workflow, the PMWOGEN function fall sinto a loop. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60761 Defect: 135583 Description: When you add a person to a person group and that person is marked as the group default in the result set, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60754 Defect: 134725 Description: The Unique ID column length does not match for child and parent tables in Maximo. Database Scripts: HF7520_09.dbc Manual Changes: N/A --- APAR #: IV61044 Defect: 135978 Description: The Gantt view's right click actions are missing from a cloned application of scheduler. Database Scripts: N/A Manual Changes: Clear Java and browser cache. --- APAR #: IV60202 Defect: 135610 Description: The To Bin field is not populated from the default bin when you transfer an item into an internal PO. Database Scripts: N/A Manual Changes: Clear Java and browser cache. --- APAR #: IV59253, IV59960 Defect: 130937, 132651 Description: When you apply the fix for APAR IV24726, the Or function no longer works in searches. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61003 Defect: 135618 Description: An error occurs when you enter some values in the eAudit filter. Database Scripts: N/A Manual Changes: Clear Java and browser cache. --- APAR #: IV61012 Defect: 136083,140401 Description: When you revise and close a PO, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60659 Defect: 134888 Description: You cannot approve an invoice when a PO is revised. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60083 Defect: 133185 Description: If you add two tasks in a change, it is possible to set the same predecessor for each other's task. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59239 Defect: 131006 Description: If a default value is set in Application Designer for POLINE.LINETYPE and other POLINE attributes are affected by the setting of this value, the other default values are sometimes cleared. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59845 Defect: 136001,145834 Description: You can no longer select objects that are persistent but not main objects. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60997 Defect: 136144 Description: When you duplicate a record and create an invoice, the Site ID field defaults to site value listed in your profile. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60741 Defect: 135046 Description: When you copy a PO line and adjust the quantity, two transaction lines are created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60912 Defect(s): 135229 Description: The Clear button does not clear anything when you search for classifications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50410 Defect(s): 126263 Description: When you attempt to create some custom applications, an error occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV61156 Defect(s): 136208 Description: In the Shipment Receiving application, the To Bin field is read only. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59951 Defect(s): 132804 Description: In the Work Order Details report, when a job plan is set to inactive, the report does not return results. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61297 Defect(s): 136624 Description: You can delete a PO line after the PO is received. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61002 Defect(s): 136257 Description: Work orders with data sheets with a status marked WORKNP change to BROKEN when saved. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59657 Defect(s): 131971 Description: The SLA does not trigger any action when the target dates from the ticket are used. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61087 Defect(s): 136245 Description: When you switch from average cost pricing to standard cost pricing, existing invoices are reported at a different value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61234 Defect(s): 136467 Description: In the Receiving application, when you move an asset with the Move/Modify Asset function, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53779 Defect(s): 136780 Description: The Field Lookup UI does not shift based on the cursor. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56874 Issue(s): 136733 Description: When you create an SR from a location with a GL account that it's asset, the SR gets created without an asset or location. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV60734 Issue(s): 136683 Description: In the Asset Traceability and Reverse Traceability report, location is required for data to be displayed. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59933 / IV55717 Issue(s): 132319 Description: The status of a receipt is changing to partial when you complete a receipt even if no lines were received. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV23510 Issue(s): 124667 Description: When you select Issue Current Item from the action menu and both the GL credit and debit account fields are blank, the following error message is displayed: "BMXAA1878E - THE CHARGE DETAILS FOR A MATERIAL ISSUE/RETURN HAVE NOT BEEN SPECIFIED." Database Scripts: N/A Manual Changes : N/A --- APAR #: IV60963 Issue(s): 135425 Description: The Date parameter does not function properly when you custom configure reports. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV60086 Defect: 137263 Description: When you save a simple schedule, Maximo hangs. Database Scripts: HF7520_10.dbc Manual Changes: N/A --- APAR #: IV60654 Issue(s): 134815 Description: In the Assets application, when you select the OK button on the Move/Modify dialog box, an error occurs. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59318 Issue(s): 130851 Description: If you are in one crew and get temporarily added to another crew, when you enter time or make reassignments in Maximo Everyplace, you are assigned to the incorrect crew. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV61657 Issue(s): 137937 Description: The Reorder process invalidates inventory items that have a PENDOBS status. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV60285 Defect: 133536 Description: Maximo's parent table's unique ID column length does not match the child table's unique ID column length. Database Scripts: HF7505_11.dbc Manual Changes: N/A --- APAR #: IV61429 Defect: 138321 Description: When a Usage document is set to shipped and received, the supplying storeroom quantity is not adjusted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57308 Defect: 129425 Description: CREWWORKGROUP MISSED IN JOBTASK TABLE AND UI. Database Scripts: HF7520_11.dbc Manual Changes: 1) In Application Designer, export jobplan.xml and wotrack.xml. Save the exported files to a location where you can edit them. 2) Open the just exported and saved jobplan.xml in a text editor. 3) Find the line that contains 4) Add the following line under this (NOTE: the customer might want to put add this field in a different area on the UI screen) 5) Save the file. 6) Open the just exported and saved wotrack.xml in a text editor. 7) Find the line that contains 8) Add the following line under this (NOTE: the customer might want to put add this field in a different area on the UI screen) 9) Save the file. 10) Import the modified jobplan.xml and wotrack.xml files. --- APAR #: IV49925 Issue(s): 119410 Description: The RFQ Vendor returns RFQ Lines that are materials, services, and items. --- APAR #: IV52157 Issue(s): 121588 Description: The Cost By System report has SQL issues. --- APAR #: IV61447 Defect: 137273 Description: When a new invoice is created against a PO with previous spending activity, the uninvoiced total does not reflect spending activity. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61738 Defect: 138164 Description: When you apply a job plan to an existing change, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60758 Defect: 136956 Description: The Description field does not properly populate in the Asset Template application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59751 Defect: 136972 Description: When you use the Modify Availability dialog, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61709 Defect: 138122 Description: In the Inventory Usage application, you cannot complete an Issue transaction if that transaction would access multiple sites. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50399 Defect: 130680 Description: Users that do not have access to specific sites are able to see unauthorized sites. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56643 Defect: 127748 Description: In the SmartCloud Control Desk 7511, when you run a BIRT report, the CSRF token can be modified. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59951 Defect: 133321 Description: In the Work ORder Details report, if a job plan becomes inactive, the report does not return results. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54698 Defect: 136185 Description: In the View Requisition application, PO records related to PRs display an incorrect status when revised. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56255 Defect: 134542 Description: In the Purchase Contracts application, when you use the import function, you can update data in approved contracts. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60109 Defect: 132905 Description: You are no longer allowed to add an object to the LABORCRAFTRATE object. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56427 Defect: 126720 Description: In the Invoice application, the View Related Records function does not display contract references. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61743 Defect: 138557 Description: The work order changes are now displayed after selecting the refresh tool bar button. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61916 Defect: 138558 Description: When returning from Work Order Tracking to the Graphical Assignment (GA) application often the date ribbons at the top (Gantt View) and the bottom (Resource Usage) are not lining up. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59239 Defect: 131006 Description: Field Defaults from Application Designer should not be overwritten by inserting a new row. Database Scripts: N/A Manual Changes: N/A --- =============================================================================================== End IF010 (TPAE_7505_IFIX.20140710-1551.psi.zip) =============================================================================================== =============================================================================================== Begin IF011 (TPAE_7505_IFIX.20140731-1420.psi.zip) =============================================================================================== --- APAR #: IV61101 Defect: 138740 Description: When you partial receive PO lines that have a Service type, the receipt status is changed to complete. Database Scripts: N/A Manual Changes: N/A APAR #: IV56027 Defect: 138985 Description: You cannot cancel a PO with a vendor that was disqualified. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61504 Defect: 138002 Description: When you clone the Master Contracts or Software Contracts applications, you are not allowed to use the Create Associated Contract option unless you have security privileges for core applications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46065 Defect: 139824 Description: In the Work Order Tracking application, when you select the Go To Location option in the Location field and change the location, an error occurs when you return to the Work Order Tracking application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59621 Defect: 131508 Description: In the Crews application, when you add an unrestricted row, the Labor field is not populated correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62229 Defect: 139702 Description: The reorder process does not take into account the tax code hierarchy. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61715 Defect: 139209 Description: In the Application Designer, when you create new values for section headers, the values exist for your current language. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62315 Defect: 139960 Description: In the Work Order Tracking application, job plans attached to documents can be deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62799 Defect(s): 141615 Description: No tooltips are displayed when you hover over buttons in Gantt view. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53966 Defect: 140198 Description: When you use Microsoft Internet Explorer 10, the Application designer controls do not function properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62059 Defect: 140152 Description: When there are no contracts in the contracts table, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62524 Defect: 140560 Description: PR fields that reference POs are not populated correctly after PO revisions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61964 Defect: 139681 Description: When you transfer a consignment item within the same storeroom, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39521 Issue(s): 135487 Description: The PM record is not decreased when a work order is canceled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46870 Defect: 138561 Description: The Select action intermittently works incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61017 Defect: 139172 Description: The Inventory Quantity value does not decrease when you change the status of PO lines to shipped. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54041 Defect: 138415 Description: In the Labor Reporting application, downloaded time values are recorded with a colon rather than a decimal. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV57420 Defect: 138454 Description: When you log in with a default language of French and you query the Description field on the List tab, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61388 Defect: 137104 Description: You cannot have items that are set to active at an inventory level and pending at an organization level. Database Scripts: HF7505_13.dbc Manual Changes: N/A --- APAR #: IV61750 Defect: 138642 Description: When you select the Migration Manager Preview File icon on the Package tab, an error occurs. Database Scripts: HF7505_13.dbc Manual Changes: N/A --- APAR #: IV62133 Defect: 139327 Description: When an escalation is designed to close completed work orders, the escalation fails when a work order has an Originator record that is completed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48105 Defect: 139687 Description: When a contract has the same name exists at two sites and you generate a PO for either of those sites, the contract is not displayed in the Contract Reference field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61951 Defect: 139856 Description: The CHANGEBY and CHANGEDATE fields on ASSETMETER or LOCATIONMETER business objects are not updated by integration. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62279 Defect: 139850 Description: In the Graphical Assignment application, the Assign To function causes Maximo to intermittently lock up. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62094 Defect: 138905 Description: In the Graphical Assignment and Scheduler applications, the Save button does not always become active when changes are made. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61607 Defect: 137944 Description: When a rotating asset is transferred to a site that it cannot be returned to, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62345 Defect: 141111 Description: In the Preventave Maintenance application, the PM.NEXTDATE field is set to null when a PM-generated work order is canceled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62135 Defect: 139755 Description: Some SQLs run twice for work order objects. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60789 Defect: 135765 Description: The AMDAILY_FORMATRPTDESIGN report shows incorrect hours for certain time zones when Daylight Saving Time is in effect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53155 Defect: 138461 Description: The CLASS_HIERARCHY.RPTDESIGN report does not display all child records attached to a classification. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61013 Defect: 135860 Description: In the Inventory application, when the transaction type is set to CAPCSTADJ and cost is set to FIFO, no entries are recorded. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60955 Defect(s): 141498 Description: When you enter lines into a rich text editor with DIVs instead of BRs, Microsoft Internet Explorer 8 crashes. Database Scripts: HF7505_14.dbc Manual Changes: Added system property (webclient.richtext.blocknode) for rich text editor block node for enter key. Should be set to 'BR', 'DIV', or 'P'. Default value is 'DIV'. --- APAR #: IV60963 Issue(s): 135425 Description: When you configure Maximo and Cognos to create a report, you cannot specify more than one condition at a time. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV59935 Defect: 132251 Description: Two different users cannot have their own timers for the same work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59285 Defect: 130781 Description: BMXAA2590E error? ?regular hours plus overtime hours exceeds duration? error in Everyplace Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62097 Defect: 138885 Description: The wrong PO number is displayed on the PO application after the user clicks OK for the Workflow action for "Approve PO" for another PO that was routed to Workflow. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62134 Defect(s): 139072 Description: In the Graphical Assignment application, the Duration value that is calculated does not get saved to a corresponding work order. Database Scripts: N/A Manual Changes: N/A =============================================================================================== End IF011 (TPAE_7505_IFIX.20140731-1420.psi.zip) =============================================================================================== =============================================================================================== Begin IF012(TPAE_7505_IFIX.20140829-1133.psi.zip) =============================================================================================== --- APAR #: IV62576 Defect: 140887 Description: Cloned owner dialog boxes stay open and do not close. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60464 Defect: 135203 Description: In the Purchase Orders application, voiding a receipt requires inspection. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61618 Defect: 139322 Description: The Report List portlet allows you to select reports you don't have access to. Database Scripts: HF7505_17.dbc Manual Changes: N/A --- APAR #: IV62944 Defect: 142330 Description: When you add a Classification field in View Service Requests with the same configuration as the Classification field and then run an advanced search, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62987 Defect: 142150 Description: The skill level for a contract does not validate the organizations for Skill fields. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63019 Defect: 142514 Description: When you delete a primary asset with the Move/Modify dialog box, the Asset field in the main WO is not cleared. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60883 Defect: 138331 Description: There are several instances where the Work log queries take up to 2 minutes to complete. Database Scripts: HF7505_16.dbc Manual Changes: N/A --- APAR #: IV61638 Defect: 137873 Description: In the Change Status dialog box, when the Print Work Order option and the Change Work Order Status in Background option are both selected, neither of these options function. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62338 Defect: 140274 Description: When the Secured Attachment option is enabled and you direct print with an attachment, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62719 Defect: 141410 Description: Date report parameters throw errors when there is a custom date format. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62896 Defect: 141982 Description: When you create a communication from an incident, an email is sent even if required fields are left blank. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62407 Defect(s): 140238 Description: When a Planned Labor requirement for a work order does not have a skill on it and you use that requirement in Graphical Assignments, a skill is added to the tooltip. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62228 Defect(s): 139413 Description: The MXE.SEC.ALLOWEDIP property does not function correctly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV53774 Defect(s): 143190 Description: After you apply the fix for APAR IV50706, thread deadlock occurrs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62938 Defect(s): 141973 Description: When you isue an item for a work order task, the work order's Task field is not validated. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63032 Defect(s): 143447 Description: In the Assets application, you cannot publish data from a MULTIASSETLOCCI object structure field to an external system. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54320 Defect(s): 143490 Description: When you perform an Attribute search, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59281 Defect(s): 143648 Description: In the Application Designer, when you use the Status field in the Select CIs dialog, the specified default values do not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62533 Defect(s): 140899 Description: When you modify organizations without saving the record and then navigate to a different application, Maximo hangs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59282 Defect(s): 130656 Description: The Location drilldown opens to the asset tab but displays the parent of the asset selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63066 Defect: 143975 Description: In the Purchase Orders application, PO lines that the Inspection Required option selected double the order quantity upon inspection. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63327 Defect: 143774 Description: In the Invoices application, invoices that are sent with negative numbers are changing from credit to invoice. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62206 Defect: 139978 Description: In the Domains application, the MAXTABLEDOMAIN restriction does not display values in the lookup and causes an exception. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63329 Defect(s): 144168 Description: After you apply IFIX.20140731 or IFIX.20140710, when you select a hyperlink in a report, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61333 Defect(s): 136734, 145492 Description: In the Inventory Usage application, when you select one record, no records are displayed on the List tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63523 Defect(s): 144127 Description: In the Inventory application, when an Inventory Usage record is set to STAGED, the reservation quantity does not clear. This causes additional items to be reordered. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61007 Defect(s): 143422 Description: When you add the Join attribute to a Result Set portlet in SmartCloud Control Desk 751 and Tivoli's process automation engine 7504, the Join column is duplicated multiple times when you select a different joined column and select Save. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62921 Defect(s): 141918 Description: When you hide the left navigation panel, Microsoft Internet Explorer 8 crashes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63386 Defect(s): 143905 Description: In the Work Order Tracking application, when you complete an assignment on a completed work order, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63762 Defect(s): 145060 Description: In the Service Requests application, if you have the Time Tracking section set to viewable, the Select Labor button does not function. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63627 Defect(s): 144523 Description: In the Work Order Tracking application, the Labor Actual Date value is recorded one day behind the actual time. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46299 Defect: 143266 Description: In the Invoices application, the GL Debit Account field is inconsistent when you set the type to Standard Services. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62602 Defect: 140993 Description: Inventory usage records are removed for every other amendment of planned materials on an approved work order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61379 Defect: 137034 Description: In the Plans section of the Work Order Tracking application, when you save a planned item, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58674 Defect: 145010 Description: In the Change Status dialog box, you cannot select the Broken, Decommisioned, Inactive, Missing, or Sealed options after you select one of these options. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62838 Defect: 143318,141550 Description: : The Location value on a desktop requisition is not populated to the Inventory Usage record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62597 Defect: 140789 Description: When you select the Refresh Scheduler toolbar button, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62664 Defect: 141109 Description: When you change the quantity of the first line of an INRESERVE query, a new line is added to the database rather than replacing the old line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62276 Defect: 141067 Description: : When you open an SR in an existing browser with the communication template, a cached SR record is opened when a unique ticket ID is selected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62885 Defect: 141974 Description: When you create a PO and add a tool to it, the catalog number of the tool is not copied to the PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63536 Defect: 145947 Description: In the Service Request application, when you select on the Owner Search button, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60825 Defect: 142507 Description: When a shipment receipt for a rotating asset is inspected, the status changes to NOT READY even if the destination and originating sites are the same. This should only happen when the receipt is cross-site. Database Scripts: N/A Manual Changes: N/A --- --- =============================================================================================== End IF012(TPAE_7505_IFIX.20140829-1133.psi.zip) =============================================================================================== =============================================================================================== Begin IF013(TPAE_7505_IFIX.20141003-1532.psi.zip) =============================================================================================== ----- ----- --- APAR #: IV55900 Defect: 135582,124663 Description: The V7520_13 script does not insert the application authorization records. Database Scripts: HF7520_12.dbc Manual Changes: N/A --- APAR #: IV60610 Defect(s): 135179 Description: In the Select Shifts dialog, the Filter option is disabled. Manual Changes: 1) In Application Designer, export scheduler.xml. Save the export to a location where you can edit them 2) Open the just-saved scheduler.xml in a text editor 3) Search on remove filterable="false" from that line so it will look like the following 4) Save the file. 5) Import the modified xml file --- APAR #: IV61835 Defect(s): 139403 Description: When you add a reserved attribute after an object is created, a database configuration error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61505 Defect: 147574,144677 Description: After you enter a meter reading for an asset that was moved from one site to another, the Life To Date For Asset field value is set to zero. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47771 Defect: 145815 Description: You cannot void a service receipt if you do not have permission to receive and return material receipts. Database Scripts: HF7505_21.dbc Manual Changes: N/A --- APAR #: IV63745 Defect: 145036 Description: The Download feature on the List tab contains NON-ASCII characters. Database Scripts: HF7505_20.dbc Manual Changes: Set webclient.downloadpreservewhitespace to 0 or 1, depending on whether white space should be preserved or stripped out in table download text. --- APAR #: IV61952 Defect: 138514 Description: When you identify an asset function as non-linear, enter an asset function number, and add a test point for the asset function, the tolerances for the test point are centered incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64564 Defect: 146744 Description: The Select Issued Tools dialog box displays items that have a type of RETURN. Database Scripts: HF7505_22.dbc Manual Changes: N/A --- APAR #: IV64703 Defect: 147551 Description: Scheduler does not display availability for all selected shifts. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47303 Defect: 147705 Description: When text search is enable, a language column name must be specified. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64602 Defect: 147405 Description: After you install the fix for APAR IV54674, when you create a new package that uses DMMAXGROUP, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64591 Defect: 147562 Description: In the Report Administration application, when there is an optional DATE parameter that has no value for a scheduled BIRT report, an error occurs when the report is run. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64952 Defect: 148341 Description: In the Labor application, when you associate labor to a revised Labor Rate Contracts record, an exception occurs in the logs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60633 Defect: 135013 Description: When you update a safety-related asset, you cannot verify the organization or site. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64122 Defect: 146433 Description: The All Records querries have information defined in the Where clause. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47747 Defect: 146454 Description: You cannot add attachments to master contracts that have an APPROVED status. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59870 Defect(s): 132443 Description: When you use the Select Terms button, contract terms and conditions are not displayed. Manual Changes: 1) In Application Designer, export library.xml. Save the export to a location where you can edit them 2) Open the just-saved library.xml in a text editor 3) Find the line that contains and replace the beanclass value in that line so it will look like the following 4) Save the file. 5) Import the modified xml file --- APAR #: IV63260 Defect: 143299 Description: GL Accounts do not populate correctly when you issue items to certain storeroom types. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64660 Defect(s): 147376 Description: When you change the status of multiple schedule records in scheduler 7.5.2.0, an error occurs. Database Scripts: N/A Manual Changes: 1) In Application Designer, export scheduler.xml. Save the export to a location where you can edit them 2) Open the just-saved library.xml in a text editor 3) Find the line that contains and replace the beanclass value in that line so it will look like the following 4) Save the file. 5) Import the modified xml file --- APAR #: IV62253 Defect: 146324 Description: When the base language is set to German, you are unable to change the status of a purchase contract from DRAFT to WAPPR. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52368 Defect: 148653 Description: The Quick Search function does not work after you run a query. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62186 Defect: 148349 Description: You cannot approve a work order that has an item with a reservation quantity greater than the available balance for that item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64231 Defect: 146350,150575 Description: In the E-Mail Listeners application, when you use Microsoft Outlook with the default configuration set to HTML, email HTML tags are not removed and cause an error. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64528 Defect: 146521 Description: When you navigate through a parent table, rows are not displayed correctly for subtables. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63985 Defect: 147207 Description: When you create an invoice that does not have the PO populated on the header of the invoice, the receipts and voided receipts are both displayed in the receipts section of the invoice. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62682 Defect: 148635 Description: When 11 rows are present, the counter in the header of a PO is incorrect in all applications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56724 Defect: 148881 Description: When you reserve parts with a Select Value lookup for a field that was made required by a user, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56790 Defect: 128941 Description: An incorrect Contract Release Cost value is calculated when an invoice related to a release order is paid in a different currency than the order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64018 Defect: 145897 Description: In Maximo 7.5, when a gauge meter is added to an asset the Previous Reading field is populated with zero rather than NULL. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61996 Defect: 146741 Description: When you create a purchase requisition and add an asset to the service line, when you approve the PR, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63511 Defect: 144351 Description: Assets from a work order are not carried over to an Inventory Usage record. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63657 Defect: 145004 Description: When you transfer an item that has the Roll New Status to Organizations and Inventory checkbox selected and reconcile the balance, the Current Balance value is incorrect. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64013 Defect(s): 145899 Description: If you enter an incorrect name for a new schedule and then correct it after you leave the field, Maximo does not update the default scenario name to match. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64311 Defect: 146859 Description: When you return a consignment item to a storeroom with the Inventory Usage application, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63670 Defect(s): 146069 Description: When you use a hyperlink on a report to display details of a different report, details are not displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63341 Defect: 143575 Description: When you add an incorrect link with the Link toolbar option, the validation message appears behind the dialog box that is also displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63503 Defect: 144065 Description: In the Advanced Search menu of the Invoice application, when you select an invoice date of today, date control does not respond. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62637 Defect: 146170 Description: Continuous Null Pointer Exceptions occur in Maximo. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63631 Defect: 146416 Description: When you enter negative values in the Unit Cost field of PO lines, a warning message is displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64643 Defect: 147033 Description: In the Scheduler application, tasks that are generated from a route are not created in sequence number order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60464 Defect: 135203 Description: In the Purchase Orders application, voiding a receipt requires inspection. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62599 Defect: 141344 Description: You can adjust the Class field on a work order when in read-only mode. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63268 Defect: 143375 Description: There is a Java version pop up and warning message in WorkFlow using version 1.7.0_60. & 7.5.0.5. The following system properties were added to specify the version of Java being used by the browser. Set the values for java 6 or 7, depending on the java version. mxe.javaApplet.Classid mxe.javaApplet.ClassidNoMinimum mxe.javaApplet.Codebase mxe.javaApplet.CodebaseNoProtocol mxe.javaApplet.Type Database Scripts: HF7505_18.dbc Manual Changes: N/A ----- APAR #: IV64230 Defect: 146330 Description: In Asset Templates, The select value list from an attribute which is not associated which to a domain displays all the ALN domain records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63140 Defect: 146900 Description: Description is now displaying in queries so it is consistant in all applications. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65420 Defect: 149953 Description: The user is required to presss tab twice before the system will accept input into a rich text control with the toolbar hidden. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63796 Defect: 145650 Description: This fixes two things. 1. Direct print with attachment of Microsoft Documents do not work when secured attachment is enabled. 2. When secured attachment is not enabled pdf attachments do not work. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60910 Defect: 141485 Description: The code in the task class "WOMATERIALSTATUSUPDATECRONTASK can cause and endless loop. Database Scripts: N/A Manual Changes: N/A =============================================================================================== End IF013 (TPAE_7505_IFIX.20141003-1532.psi.zip) =============================================================================================== =============================================================================================== Begin IF014 (TPAE_7505_IFIX.20141103-0928.psi.zip) =============================================================================================== APAR #: IV65035 Defect: 148965 Description: In the Graphical Assignment application, when you do emergency work, emails are incorrectly sent out. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52122 Defect: 149887 Description: When there is an APM at an INACTIVE status, the location status fails to change to decommissioned. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV58162 Defect: 150081 Description: When you do a comparison, the migration manager code does not recognize duplicate records and incorrectly adds them to a collection. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54963 Defect: 150147 Description: When you use form based authentication and an error is returned from the Maximo server during the login process, you are now redirected back to the login page with the error message displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51794 Defect: 150373 Description: When you build a new ear file, the new images and static content for the UI skin are placed in the skins folder with a date and time stamp. Database Scripts: N/A Manual Changes: 1) Open deployment descriptor (applications\maximo\maximouiweb\webmodule\WEB-INF\web.xml) with text editor. 2) Add or modify the following filter-mapping section: HttpMaxAgeFilter /webclient/skins/* 3) Save file. 4) Build and redeploy ear file. --- APAR #: IV65647 Defect(s): 150702 Description: When you install interim fix 011 for Maximo 7.5.0.5, an incorrect purchase order number appears in purchase orders when you use a workflow. Database Scripts: N/A Manual Changes: Go To application - System Configuration - Platform Configuration - System Properties insert a new Global Property: property Name is mxe.routewfcleanup, any description, Global Value 1. Save. Find this new property again, select it, and perform Live Refresh. --- APAR #: IV63732 Defect(s): 144935 Description: In the Purchase Order application, purchase order revisions do not update the purchase order revision number on the associated RFQ line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61665 Defect: 146126 Description: When you alter the start or end measures of a linear asset, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55900 Defect: 135582,124663 Description: The V7520_13 script does not insert the application authorization records. Database Scripts: HF7520_12.dbc Manual Changes: N/A --- APAR #: IV65641 Defect: 150595 Description: In the Work Order Tracking application, if a GL account is on a work order record and you choose a location, a warning message is displayed even if the proper GL account is on that location. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63671 Defect: 146193 Description: In the Invoice application, when you create an invoice and link it to a purchase order in the invoice line and you select the New Row option, the new invoice line references the initial purchase order rather than the approved purchase order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64949 Defect: 148591 Description: In the Application Designer application, the contents of sections that contain attachments are not properly displayed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60128 Defect: 136472,144642 Description: When you work with user configurations in security groups that have read-only rights, you can change look up fields that are not editable. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65138 Defect: 149040 Description: In the Work Order Tracking application, item classifications are not filtered properly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV49887 Defect: 140692 Description: A singe row subquery returns more than one row. Database Scripts: HF7505_25.dbc Manual Changes: N/A --- APAR #: IV59273 Defect(s): 151981 Description: If you add an item to a PR with the Vendor Items button instead of the Contract Items button, you can edit the cost of the item. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64419 Defect(s): 146811 Description: The Attach Documents icon loses highlight when the Add New File and Add New Webpage dialogs are canceled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60766 Defect: 134937 Description: A PO is redirected to the first record on the PO object when you start a workflow and log out and then back in. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65283 Defect: 149414 Description: A PM will not generate a work order via time-based frequency if the frequency is set to 0 and the PM.USETARGETDATE value is false. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64805 Defect: 147871 Description: You are unable to delete a person on multiple assets from the Modify All tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65040 Defect: 149034 Description: Textboxes remain in the previous row when you select the next row. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65361 Defect: 149803 Description: In the Graphical Crew Management application, when you create a new record and then change to the Graphical View tab, the application does not open. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65362 Defect: 150055 Description: In the Locations application, you are unable to decommission a location. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48018 Defect: 153160 Description: Scheduled reports that use a date range parameter produce extra outputs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66393 Defect: 153176 Description: When you attach a deep nested job plan to a work order, Maximo hangs and the server crashes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66053 Defect: 152429 Description: In the Purchase Order application, when you use the New Row button and manually type in an item number on a purchase order line, an incorrect value is populated in the Price field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV50149 Defect: 122284 Description: The hourly rate for crew types is calculated as the average hourly rate instead of the sum of the hourly rates. Database Scripts: N/A Manual Changes: N/A =============================================================================================== End IF014 (TPAE_7505_IFIX.20141103-0928.psi.zip) =============================================================================================== =============================================================================================== Begin IF015 (TPAE_7505_IFIX.20141119-1234.psi.zip) =============================================================================================== APAR #: IV56616 Defect: 126986 Description: In the Purchase Orders application, when you revise a purchase order after a purchase order receipt and return, and incorrect transaction is created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV48018 Defect: 153160 Description: In the Reports application, when the same report is generated immediately or scheduled, that date ranges produce different results. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66393 Defect: 153176 Description: In the Work Order Tracking application, when you attach a deep nested job plan to a work order, there is a delay and the server crashes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65074 Defect(s): 148745 Description: When a Result Set Graph uses dot notation, and error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65485 Defect(s): 153378 Description: In the Scheduler application, you cannot go to the Work Order Tracking application form the Gantt View tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65977 Defect(s): 153172 Description: When you select a contract type in the Software Contract List page, same contract types display twice in the Select Value dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65437 Defect(s): 153487 Description: The Toolbar icon does not work as expected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65576 Defect(s): 150546 Description: When you open Maximo in a modal window and a session expires, the Logout page takes over the Browser page. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV51852 Defect(s): 153694 Description: If you access spell check in a Long Description dialog and the language is set to Japanese, invalid bindings display. Spell check does not support Japanese but the Spell Checker button is still visible. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63718 Defect: 153773 Description: In some applications, when you use an All Records filter, a Query based report will fail. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV56533 Defect : 154110 Description: When you download data and generate a Microsoft Excel file, the Value column in empty. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66324 Defect : 152629 Description: In the Invoices application, when you approve an invoice, an error occurs because there are no matching receipts for Line 1 of the purchase order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66790 Defect: 154517 Description: In the Lease/Rental Contract application, the Select Action menu does not have a Duplicate option. Database Scripts: HF7505_29.dbc Manual Changes: N/A --- APAR #: IV66224 Defect: 152704 Description: When you receive emails through a workflow and the language is Russian, line breaks occur in the middle of the words. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66599 Defect: 153978 Description: When you create a purchase order from a contract with contract terms in different organizations, an error occurs and the purchase order is not created. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54640 Defect: 151922 Description: When you run the PM work order generation cron task, cursors are not released. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52051 Defect: 152854 Description: In WebSphere, if you close a Browser tab with the session open, you cannot log in until the browser is closed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60785 Defect: 152848 Description: In Maximo 7.5.1, when you run the UpdateDB bat file, the EXTRACTSCTEMPLATELABELS process fails. An index violation is on the MAXLABEl_NDX1 table. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63268 Defect: 143375 Description: There is a Java version pop up and warning message in the WorkFlow application using version 1.7.0_60. & 7.5.0.5. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60191 Defect: 133324 Description: In the Assets application, when you upgrade from 7.1 to 7.5, the Meter Reading relationship causes the Asset History tab to freeze. Database Scripts: HF7505_28.dbc Manual Changes: N/A --- APAR #: IV60764 Defect: 152747 Description: In the Assets application, when you modify the start or end measure of an existing linear asset, an error occurs. Database Scripts: HF7505_27.dbc Manual Changes: See Manual Changes section. --- APAR #: IV65169 Defect: 150332 Description: In the Report application, the Summary of Asset Failures By Location report fails. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65532 Defect: 150591 Description: In the Assets application, the View Asset Status History dialog is not accessible for assets that are not calibrated. Database Scripts: HF7505_26.dbc Manual Changes: N/A --- APAR #: IV46577 Defect: 152133 Description: In the Job Plan application, when you attach a file to a Job Plan task, you are unable to select a predecessor task. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66053 Defect: 152429 Description: When you use the New Row button on a purchase order, the contract unit cost transfers incorrectly. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64805 Defect: 147871 Description: In the Assets application, when you use the Modify All tab to delete a person on multiple assets, an error occurs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62696 Defect: 141660 Description: When you revise a PO by deleting one line and adding a new one, both PRs reference the same PO line. Database Scripts: HF7505_15.dbc Manual Changes: N/A --- APAR #: IV60341 Defect: 137882 Description: Multi language support for Ticket template - generated an error trying to apply a task or job plan in second language Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65672 Defect: 151408 Description: Ticking "CALENDARBASED" in WorkFlow Assignment table does not work properly for service requests and incidents. Database Scripts: N/A Manual Changes: N/A =============================================================================================== End IF015 (TPAE_7505_IFIX.20141119-1234.psi.zip) =============================================================================================== --- APAR #: IV59594 Defect: 131633 Description: When an asset is brought down (that is, ASSET.ISRUNNING is being set to false via the Report Downtime action) and the date and time are the same as the CHANGEDATE of the ASSETSTATUS record previously created to record the asset being brought back up (that is, when ASSET.ISRUNNING was set to true) to complete the previous downtime reporting cycle), an error is thrown indicating that two ASSETSTATUS records for the same asset cannot have the same date/time. Contiguous downtime reporting cycles in which the start date/time of one cycle is the same as the end date/time of the previous cycle should be allowed. Database Scripts: HF7505_30.dbc Manual Changes: See Manual Changes section. --- APAR #: IV46433 Defect: 140172 Description: PM forecast cron task doesn't complete if 33000+ records are processed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64812 Defect: 147662 Description: Escalation still running on holidays which have been coded in the calendar. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64788 Defect: 147778 Description: Consignment type invoice where PO tax option is set to add Tax 1 for all items will add tax again. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64807 Defect: 147954 Description: In asset application, there is no way to refresh and see history flag "Y" in View Work Order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65458 Defect: 150136 Description: Default check box becomes read-only in work zones giving you no way to change the default. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66457 Defect: 153347 Description: Next invoice date field does not populate on consignment items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66711 Defect: 154191 Description: Transfering rotating assets works incorrectly causing inventory wrong balances. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66814 Defect: 154473 Description: Input value exceeds the error message dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66864 Defect: 154621 Description: BMXAA2613E error contract XXXX is not active for the start date of the transaction. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66979 Defect: 155036 Description: The unit cost and line cost are incorrect when return consignment items. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67072 Defect: 155147 Description: Nested job plan description does not get copied to the child work order's description field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66939 Defect: 155235 Description: The Gantt View work order range does not execute properly on all work orders. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66941 Defect: 155386 Description: Integer fields cannot be searched using a comma separated list of values without using an equals sign in front of each value. Database Scripts: HF7505_31.dbc Manual Changes: Set new property mxe.system.IntegerQBEsearchCommaAsOr to 1 to use a comma separated list in an integer field search. --- APAR #: IV67142 Defect: 155553 Description: When clicking the Select PO in transit button, the bin field still stays blank although the default bin is filled in. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67277 Defect: 155786 Description: Cannot load meter reading with linear reference numbers Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67202 Defect: 155789 Description: In the Scheduler Applications on Internet Explorer, you cannot make a selection as the right click menu quickly disappears. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67049 Defect(s): 155954 Description: Receive read-only error when adding a second item to the same item field. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67298 Defect: 156071 Description: When importing meter readings via the MIF, work orders may be generated before one of the meter frequencies has been met if a related PM has more than one PMMETER and the asset on the PM is configured for automatic PM work order generation, that is, ASSET.AUTOWOGEN is set to true. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66293 Defect: 156103 Description: When using start timer in SR application year showing a 0002 and causing an integration error. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67441 Defect: 156387 Description: Assets are out of place when looking at topology that has more than 12 nodes. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67538 Defect: 156442 Description: Random Records are not inserting in WOSTATUS - this fix the MXException classcastexception. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67686 Defect: 156794 Description: In Classifications application, unable to add attributes to classification that is used on an ASSETSPEC, LOCATIONSPEC, or ITEMSPEC if one of the crossover fields is configured to be not nullable and the classification is used on 3000 or more of the assets, locations or items having the corresponding crossover specification value(s) configured as required. Depending on database platform, one of the following errors is encountered: ORA-01400; DB2 -407; SQL Server Msg 515, Level 16, State 2. These messages all indicate that the column in question cannot be a NULL value. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67521 Defect: 157088 Description: When Excel attached file is on a shared drive, it does not print with the report while printing using Direct Print With Attachment feature. Where as .doc(x) and .ppt(x) print. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67754 Defect: 157169 Description: In Scheduler, Compare - Load view not working. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63897 Defect: 157241 Description: In the Inventory application, the Inventory Available quantity and the Hard Reserved quantity are incorrect when you have multiple reservations. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67958 Defect: 157630 Description: BMXAA5328W error when selecting an asset with a different GL Account than from the location in the Create Service Requests application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68105 Defect: 157924 Description: Error when populating Start Date field on Manage Downtime History dialog in Assets application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55895 Defect: 157947 Description: Backspapce is backing browser to start center. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63871 Defect: 148445 Description: If multiple exchange rate transactions exist, after invoice is approved, PO Received Cost could be wrong. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67263 Defect: 155930 Description: KPI QUERIES ARE NOT LOGGED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV52935 Defect(s): 158634 Description: The Specification attributes were displayed on the last page when existing classification was changed to a new one. This happened when the number of attributes is greater than the number per page. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67412 Defect(s): 156302 Description: The Select Owner dialog in Work Order Tracking is not correctly populating the Persons tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67498 Defect(s): 156334 Description: Incorrect calculations on Work Order View Costs dialog. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68517 Defect: 159073 Description: In the Work Order Tracking application Multiple Assets,Locations and CIs table window, any crossover added to the MULTIASSETLOCCI.LOCATION will not work when location is determined and set from the asset being set. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66256 Defect: 156988 Description: When exporting an ad hoc report to CSV, time fields get exported as date-time, where the date shows as 01/01/1970. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66162 Defect: 159107 Description: When starting the preventive maintenance, the date PM.LASTCOMPDATE is updated with the start date. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV47143 Defect: 159053 Description: DATABASE ERROR NUMBER 30491 HAS OCCURRED. INVALID SQL QUERIES ARE LOGGED IN THE LOG FILE. Database Scripts: N/A Manual Changes : N/A --- APAR #: IV63038 Defect: 144403 Description: ABLE TO RECEIVE MATERIALS FROM THE "SELECT ORDERED ITEMS" BUTTON MULTIPLE TIMES IF NO SAVE IS DONE IN BETWEEN Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68004 Defect: 158362 Description: TIMESCALE IS NOT BEING SAVED AND THEN RESTORED DURING GRAPHICAL ASSIGNMENT AND SCHEDULER SESSIONS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55919 Defect: 156065 Description: CANNOT CREATE A PO FROM RFQ WITH Quotation Line COST = 0. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66499 Defect: 153740 Description: ASSET.CHANGEDATE AND ASSET.CHANGEBY NOT UPDATED IN ASSETS(TR) WHEN OWNER OR OPERATOR VALUES ARE REMOVED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67645 Defect: 156906 Description: STOREROOM HAS A DEFAULT VALUE IN DEFAULT TABLE DATA, WHEN NEW POLINE IS CREATED, GL DEBIT ACCOUNT IS NOT POPULATING. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68889 Defect(s): 160191 Description: SCHEDULER AND GA DO NOT DISPLAY WORK AND NONWORK TIME CORRECTLY WHEN YOU HAVE MULTIPLE OVERLAPPING SHIFTS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66610 Defect: 154020 Description: ERROR RECEIVED WHEN CREATING A NEW SERVICE ADDRESS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67299 Defect: 158034 Description: REACHED MAXIMUM NUMBER OF SESSIONS" ERROR EVEN AFTER CLOSING ALL TABS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66550 Defect: 154267 Description: IMPROPER PM FORECAST Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68176 Defect: 158566 Description: Creating incidents using formatted emails and the longdescription is losing break lines. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67845 Defect: 157503 Description: Inventory AdjustmentsTrans -THE CURBALADJ FOR ANY ITEM IS NOT CORRECT. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59724 Defect: 158385 Description: User can enter anything in the relationship name when entering a CI relationship in the CI application Database Scripts: N/A Manual Changes: N/A --- APAR #: IV45585 Defect: 160215 Description: Asset Specification records are not removed when a classification is deleted. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65281 Defect: 155555 Description: In the Invoices application, when you select the View All Lines That Are not Invoiced option, Maximo hangs. Database Scripts: HF7505_32.dbc Manual Changes: N/A --- APAR #: IV64504 (REWORK) Defect(s): 146661 Description: The List tab filter does not work when the Use Screen Reader option is set to true. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62558 Defect(s): 140521 Description: By moving the asset the field class is picking a not operating site Database Scripts: N/A Manual Changes: N/A --- APAR #: IV55046 Defect(s): 122982 Description: Not able to open the "Update Service Request Log" dialog via URL Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66743 Defect(s): 154438 Description: RECEIPT AND TRANSFER TRANSACTIONS OF CONSIGNMENT ITEM THE FIELDCONSIGNMENT IN MATRECTRANS IS NOT BEING POPULATED WITH 1. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67663 Defect(s): 159880 Description: IT IS NOT POSSIBLE TO SET MRLINE.RESTYPE DEFAULT VALUE TO SOFT OR HARD. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63429 Defect: 157127 Description: GETTING A "BMXAA1863E - PLEASE ENTER AN EXISTING ITEM/STOREROOM COMBINATION" WHEN TRYING TO SAVE A WORK ORDER. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67747 Defect: 157100 Description: Scheduler - cannot publish optimized scenarios. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61418 Defect(s): 159134 Description: THE FILE SELECTION DIALOG WHEN UPLOADING A FILE ATTACHMENT IN MAXIMO HAS A FILTER FOR CSS FILES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69084 Defect: 161273 Description: WHILE MOVING ASSETS, DECOMMISSIONED LOCATIONS ARE AVAILABLE FOR SELECTION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67238 Defect: 155886 Description: MAXIMO NEEDS TO ALLOW REVERSED INVOICES TO CHANGE TO PAID STATUS ONCE PAYMENT INFORMATION IS SENT TO MAXIMO. Database Scripts: HF7505_33 Manual Changes: A maxvar SETTOREVERSED is being added to control setting of the original invoice status to REVERSED which is the default. The maxvar will be set to 1 (true) and will have to be set to 0 manually if the user does not want the original invoice status to be changed to REVERSED which is the case for the client who reported this APAR. --- APAR #: IV56046 Defect: 161280 Description: When a table window row is marked for deletion the strike-through line does not appear. The trash icon does change as expected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68359 Defect: 158647 Description: FOCUS CHANGES TO THE FIRST ROW AFTER ATTACHING FILE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69029 Defect: 161094 Description: In Application Designer, the 'Save' button is not active when Configure Type-Ahead changes are made if mxe.webclient.ClientDataValidation is set to 1 in the System Properties application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69369 Defect: 162679 Description: VENDOR DELIVERY DATE ON PR & PO NOT POPULATING Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68344 Defect: 158458 Description: MAXIMO ALLOWING CHANGE TO SHIPPING STATUS CHANGE IN INVENTORY USAGE FOR ISSUES. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65034 Defect: 148634 Description: MESSAGE IS NOT ALWAYS SHOWN AS NEEDED THE WORKFLOW PROCESS XXX CAN NOT BE STARTED IN THE BACKGROUND. There shouldn't be "cannot be started" message, work flow process should start as it starts from the power application. User should see the same flow as when routing the mbo in the power application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67735 Defect: 162330 Description: When you add the MXE.ROUTEWFCLEANUP property to Maximo and set the global value of the property to 1, you can no longer modify attribute aliases in the Object Structure application. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62002 Defect: 157742 Description: PERSONANCESTOR CHAIN BREAKS WHEN UPDATING A PERSON RECORD WITHOUT CHANGING THE SUPERVISOR VIA MIF. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67800 Defect: 157347 Description: SHORT DESCRIPTIONS CONTAINING A LEFT ANGLE BRACKET ARE TRUNCATED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68894 Defect: 160246 Description: BMXAA0259E Error when trying to send a email with this character: :[test] Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68420 Defect: 158997 Description: ABSOLUTE MEASURE DOES NOT UPDATE ON WORK ORDER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68095 Defect: 163238 Description: VALUE MISSING IN PIE CHART OF RESULT SET ON START CENTER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV39403 Defect: 155726 Description: CREATE NEW MOBILE APPLICATION RECEIVE ERROR BMXAA4214E WHEN SELECTING A CLASSIFICATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV63507 Defect: 147968 Description: Birt Report does not work when a proxy server redirects the request. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68076 Defect: 158882 Description: PO CAN BE CANCELLED EVEN THOUGH THERE ARE RELATED INVOICES THAT HAVE BEEN PROCESSED AGAINST THAT PO. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69926 Defect: 164408 Description: Error occurred when Select Rotating Assets for Return if Global Data Restrictions has been set Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69950 Defect: 165114 Description: Problem deploying a package with a non persistent long description field on ticket. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67185 Defect: 155433 Description: GL debit account is incorrect in Shipment Return for inspection required items. It should be the storeroom's control account. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69465 Defect: 163044 Description: RESOURCE HOURS AND AVAILABILITY GRAPH IN SCHEDULER DISPLAYS DATA IN AN INCONSISTENT AND MISLEADING WAY. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68970 Defect: 160817 Description: BIRT reports do not display islamic dates when system property mxe.baseCalendar=islamic.. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69662 Defect: 163916 Description: Cannot acquire error report by maximo relationship Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70586 Defect: 165732 Description: Incorrect Work Package Material Status on parent Work Order. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70489 Defect: 165212 Description: Error when clicking refresh on work details of CI. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71016 Defect: 166709 Description: MAXUSER BASED WF PROCESSES GET ATTRIBUTE ORGID DOES NOT EXIST ERROR. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70853 Defect: 166567 Description: Base Services IFIX 7.5.0.5 - IV70853 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69175 Defect: 161686 Description: Base Services 7.5.0.5 IFIX : UNABLE TO USE DOMAIN VALIDATION ON CUSTOM SYSTEM PROPERTY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69263 Defect: 162203 Description: For Maximo users (if Feature Pack is in use) and SCCD users, if left navigation bar is enabled (that is, system property mxe.webclient.systemNavBar=1) the left navigation bar does not behave as expected. When the taskNav control has its expanded element set to false, the left navigation bar is not collapsed when entering the application. Also, the left navigation bar will not close and open when the open/close icon is clicked. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71154 Defect: 167286 Description: On any application List tab, Advanced Search will fail if the 'All Bookmarks' search is used just prior to the Advanced Search. The following error is encountered: "BMXAA4214E: An unknown error has occurred. Please contact your System Administrator for assistance. Gather the log from the directory and determine where and why the error is thrown. null" Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71118 Defect: 167694 Description: RULES IN "VALIDATION WHERE CLAUSE" AND "LIST WHERE CLAUSE" AREBEING IGNORED IN SPECIFICATION TABLE VALUE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71271 Defect: 167527 Description:AFTER APPLYING IFIX016 - RESERVATIONS ARE NOT GOING FROM APSOFT TO APHARD AS REQUIRED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69068 Defect: 161327 Description: FIFO inventory cost does not include tax when the item was add to storeroom with no balance. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70691 Defect: 166504 Description: LSNRMAILER IS SENT TO THE WRONG E-MAIL ADDRESS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71206 Defect: 167341 Description: Communication error when trying to send email with the character :[ Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54642 Defect: 153129 Description: Workorder status changed without considering required material availability Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68876 Defect: 160214 Description: THE ASSETTRANS.DATEMOVED FIELD IS UPDATE WHEN AN ASSET TEMPLATEIS APPLIED TO AN ASSET. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65681 Defect: 167180 Description: View/Manage Query box not showing unless All Sites flag is checked in Security Groups. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71258 Defect: 167620 Description: Under APAR IV41872, report execution behavior was changed to open a separate viewer window for each report. This behavior is incorrect since only one active report is allowed per session. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68118 Defect: 158593 Description: request for Calibration 7500, Importing Data Sheet templates through Integration Framework Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68057 Defect: 166208 Description: When avgcost is adjusted, it does not create avgcstadj transaction in invtrans table using MIF. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65191 Defect: 158019 Description: CANNOT ADD ATTRIBUTE TO CLASSIFICATION WHEN ATTRIBUTE ALREADY ADDED TO ASSET SPECIFICATIONS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71468 Defect: 170598 Description: INCORRECT FILTERING ASSETS IN THE ASSET TICKET FIELD CLASS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70473 Defect: 165334 Description: Maximo displays georgian date format instead of islamic date format in communication templates. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69532 Defect: 171243 Description: TPAE IFIX 7505 - APAR - IV69532 MIGRATION MANAGER DATA DICTIONARY ERROR Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72284 Defect: 171089 Description: Maximo monitoring agent userid is being converted to lowercase. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71835 Defect: 169290 Description: TRANSFER OF FIFO ITEM IN INVENTORY USAGE SETS DEBIT ACCOUNT TOLOCATION.CONTROLACC. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70782 Defect: 167230 Description: TRANSFER ON INSPECTION REQUIRED USES WRONG GL DEBIT ACCOUNT. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72363 Defect: 171063 Description: Result set color not displayed for fields like actlabhrs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69138 Defect: 162308 Description: STAGED QUANTITIES ARE NOT INCLUDED IN THE INVENTORY AVERAGE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72551 Defect: 171690 Description: CLONED APP ATTACHMENT'S FOCUS JUMPS AFTER INSTALLING LAFIX Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72581 Defect: 171523 Description: Smart fill does not work properly in table header if details is not opened. Database Scripts: N/A Manual Changes: Added new property "alwaysrefresh" to tabledetails to support type-ahead filter domain fields on tabledetails section. To activate add alwaysrefresh="true" to tabledetails. --- APAR #: IV71452 Defect: 168443 Description: MIF DOES NOT REMOVE THE BLANKSPACES FROM THE DOCLINKS FILENAME Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61515 Defect: 170324 Description: PURCHVIEW.EXCHANGERATE IS NOT UPDATED WHEN CURRENCY IS CHANGEDIN PURCHASE CONTRACTS APPLICATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67566 Defect: 165805 Description: SOME TOOLBAR NAVIGATION KEYBOARD SHORTCUTS DO NOT WORK Database Scripts: N/A Manual Changes : N/A --- APAR #: IV25347 Defect: 166503 Description: Reference point asset feature measure changes are not being propagated to the records in the related tables (for example, ASSETFEATURE, ASSETFEATURESPEC, ROUTE_STOP,and PM) that reference the modified reference point. Database Scripts: HF7505_34 Manual Changes : See Manual Changes section --- APAR #: IV68359 (REWORK) Defect: 158647 Description: FOCUS CHANGES TO THE FIRST ROW AFTER ATTACHING FILE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59290 Defect: 174203 Description: ATTRIBUTE WONUM DOES NOT EXIST WHEN CLICKING ON RELATE RECORDSBUTTON. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73102 Defect: 174001 Description: When a new Work Order is created in the Quick Reporting application because an Asset is selected which is not in the user's default site, that new Work Order has status WAPPR instead of INPRG. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73280 Defect: 174616 Description: HTTP 500 WHEN LOGING IN TO SCCD/MAXIMO Database Scripts: N/A Manual Changes: N/A --- APAR #: IV71069 Defect: 174254 Description: LDAPSYNC does not update the LDAPSYNCPARAMS table when there are less errors than mxe.ldapmaxerrors. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72195 Defect: 174164 Description: Cacheable HTTPS response vulnerability. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72837 Defect: 174758 Description: WHEN USING SAVED QUERY, IF YOU FIND,AND THEN CLEARING THE FIND,MAXIMO STILL DISPLAYS THE SAVED QUERY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67942 Defect: 169915 Description: Notifications sent earlier than expected. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV70838 Defect: 166367 Description: RECHOOVER DIALOG CLEARS RICHTEXT WORKLOG FIELD Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73446 Defect: 177204 Description: USING GLNAVIGATOR LOOKUP IN MAXIMO HAS A SLOW RESPONSE TIME ON LARGE DATABASES. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73526 Defect: 176019 Description: JAWS SCREENREADER IS NOT ABLE TO FIND BUTTONS IN THE TOOLBAR Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73918 Defect: 177443 Description: MAXIMO CANNOT REDIRECT TO WEBSEAL LOGIN PAGE ON SESSION TIMEOUT Database Scripts: N/A Manual Changes: A new property was added called mxe.webclient.proxyLoginStringCheck. It specifies a certain string in the response used to indicate a redirect to the WEBSEAL login page. The default value is "pkmslogin". --- APAR #: IV39087 Defect: 177644 Description: FILTER COLUMN DOES NOT ALIGN CORRECTLY WHEN COLUMNS HAVECONDTIONS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73833 Defect: 177675 Description: REPORT USAGE DATA NOT ALWAYS WRITTEN TO TABLE. WHEN USING CHANGE STATUS ALONG WITH PRINT IN BACKGROUND Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59526 Defect: 176419 Description: DOWN ARROW NOT WORKING IN FAVORITE APPS FOR JAWS ACCESSIBILITY Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61207 Defect: 177832 Description: Cancel button does not work when transferring items from a storeroom to another. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68388 Defect: 177714 Description: An orphan groupuser record is created when ldapsync has errors creating user records. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73118 Defect: 174441 Description: ISSUE WHEN USING A CLONE OF ASSIGNMENT MANAGER (WORKMAN). Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73855 Defect: 179513 Description: JAWS SCREEN READER DOES NOT READ/NAVIGATE THROUGH A TABLE VALUES. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69211 Defect: 179772 Description: Reports fail when including a long description with < or > when rich text is disabled. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV54349 Defect: 163265 Description: ASSET INFORMATION IS NOT COPIED TO INVUSELINE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69611 Defect: 163639 Description: CHANGE INSPECTION STATUS IN THE SHIPMENT RECEIVING APPLICATIONGIVES ERROR: BMXAA4214E - AN UNKNOWN ERROR HAS OCCURRED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV69700 Defect: 163960 Description: QUERY USED TO FETCH THE AVAILABILITY DATA IS WRONG BECAUSE IT JOINS THE PERSONID FIELD WITH THE LABORCODE FIELD. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73397 Defect: 175921 Description: ASSET TEMPLATES DO NOT APPLY CLASSIFICATION TEMPLATES CORRECTLY. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73898 Defect: 179431 Description: In the Inventory Usage and Shipment Receiving applications, error "BMXAA8229W - Record ASSET : Site=DENVER Asset=49332 has been updated by another user. Your changes have not been saved. Refresh the record and try again." encountered for cross-site transfers of rotating assets. In Inventory Usage, this occurs when changing the status of the transfer to COMPLETE. In Shipment Receiving, this occurs when receiving a rotating asset from an Inventory Usage that has a status of SHIPPED. Database Scripts: N/A Manual Changes: N/A --- APAR #: N/A Defect: 179996 Description: Would like a tool bar button that will center the gantt around current date Database Scripts: HF7520_14.msg Manual Changes: Run updatedb --- APAR #: N/A Defect: 179998 Description: Display work order description when hovering over a grey bar in GAM Database Scripts: N/A Manual Changes: --- APAR #: IV73797 Defect: 176835 Description: PO GL acct not populating in the invoice when default storeroom used in PO creation Database Scripts: N/A Manual Changes: N/A --- APAR #: IV62974 Defect: 177200 Description: WHEN CHANGING A WORK ORDER'S LOCATION, LOCATION VALUES ARE NOT CROSSING OVER. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72802 Defect: 179085 Description: On a Contract line, the Total Cost field does not get updated after the line cost is removed. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV67971 Defect: 175474 Description: WHEN RECONCILING BALANCES, GOT ERROR BMXAA4129E - RECORD ALREADY EXISTS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74407 Defect: 179779 Description: Item not able to be set to obsolete if item listed on a CANCELLED Job Plan. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72835 Defect: 176275 Description: EMail Listener can not create ticket when person email name contains umlaut and has no quotes around it. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV59263 Defect: Description: automation script mbocount high for jython engine Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73226 Defect: 174580 Description: Incorrect quantity on the final line when distributing PO Costs. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74823 Defect: 182209 Description: Ad hoc preview limit does not consider app-level data restrictions. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV60285 (REWORK) Defect: 133536 Description: Changes were made to the type and length of the Ownerid field in work order specifications. This issue is reworked to address a regression that prevents users from creating detail ad hoc reports. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74669 Defect: 181458 Description: COPY FAILURE HIERARCHY DIALOG IS LIMITING THE LIST TO 20 RECORDS WHEN IT IS NOT SORTED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74864 Defect: 182044 Description: CANNOT COPY POLINE INTO INVOICELINE. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74414 Defect: 180587 Description: PR TOTAL COST NOT CALCULATING CORRECTLY WHEN PRLINE IS FILTERED, AND IS MARKED AND THEN UNMARKED FOR DELETION AND THEN SAVED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV68045 Defect: 182428 Description: Long running connections not closing inactive gv$session. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV35406 Defect: 178190 Description: OPEN RESULT SET IN THE APPLICATION" OPTION NOT TAKING THE SORT ORDER FROM THE QUERY ON START CENTER RESULT SET Database Scripts: N/A Manual Changes: N/A --- APAR #: IV61730 Defect: 178191 Description: CLICKING ON THE GRAPHS ON THE STARTCENTER THE RESULT IS NOT SHOWN IN THE APPLICATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV75367 Defect: 184764 Description: USER GETS STUCK IN AN ERROR LOOP IF ATTEMPTING TO CREATE A SNAPSHOT OF A SCHEDULE AND THE SNAPSHOT NAME ALREADY EXISTS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV75520 Defect: 186206 Description: ORACLE EXCEPTION "ORA-00920: INVALID RELATIONAL OPERATOR" ISTHROWN IN SCHEDULER 7520 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74471 Defect: 182473 Description: DISCREPANCY IN RECONCILE LOGIC WHEN MAXIMO DOES NOT CONSIDERTRANSFER TRANSACTION DONE AFTER PHYSICAL COUNT (7505) Database Scripts: N/A Manual Changes: N/A --- APAR #: IV76005 Defect: 187685 Description: Scheduling report with long multi-select list results in confusing error message: BMXAA4049E - The value specified asset.assetnum...exceeds the maximum field length. Database Scripts: HF7505_35.msg Manual Changes: N/A --- APAR #: IV74896 Defect: 182700 Description: Dates on a Maximo object are not crossing over accurately to another Maximo object. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64047 Defect: 189277 Description: WO VIEW COST / DURATION WRONG CALCULATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV64047 Defect: 189277 Description: WO VIEW COST / DURATION WRONG CALCULATION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV46776 Defect: 182317 Description: Occasionally the Cognos cookie remains after timeout. Users cannot run cognos reports until the browser cache is cleared. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV76236 Defect: 188872 Description: REQUIRED DATE DOES NOT CARRY OVER TO THE LINES OF THE DESKTOP REQUISITION Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72138 Defect: 187442 Description: In a hyperlinked BIRT report, the hyperlinked url can become longer than the url supported by Microsoft Internet Explorer. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV76094 Defect: 190419 Description: UNDELETE ON THE PARENT WO WON'T UNDO CHANGES ON THE CHILD WO Database Scripts: N/A Manual Changes: N/A --- APAR #: IV76179 Defect: 192843 Description: When running the reorder report (invpurch) for a storeroom with chinese characters, no items appear, despite items in reorderpad. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV76294 Defect: 193704 Description: REORDER PROCESS GENERATING PRS AGAINST ITEMS ALREADY REFERENCEDON OPENED POS Database Scripts: HF7505_37.dbc Manual Changes: Change mxe.reorder.calculatepoqty value to 1 to avoid correlated update to calculate Reorder POQTY. Go To System Properties, Find mxe.reorder.calculatepoqty. Change Global value to 1. Save. Do Live Refresh. After Live Refresh, Current value is 1. --- APAR #: IV77349 Defect: 194275 Description: When filtering on a date field like reportdate using the datewhere dst started in brasil they get incorrect results Database Scripts: N/A Manual Changes: N/A --- APAR #: IV77720 Defect: 195471 Description: Date lookup tool not returning correct date when filtering for the date when daylight savings time changes for brazilian portuguese environment. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV75574 Defect: 196578 Description: New empty lines are added after each text line in email sent from communication template. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78018 Defect: 196816 Description: Double byte characters are not passed properly to the report from maximo Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78349 Defect: 199914 Description: LEASE/RENTAL CONTRACT ASSOCIATE ASSET TAB ASSET HYPERLINK BROKE WHEN ASSET LOCATION HAS MOVED Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78135 Defect: 199825 Description: In the Condition Monitoring application, inactive PMs can be added to measure points. An error is not encountered until work order generation. As with adding job plans to a measure point, one should not be able to add inactive PMs to a measure point. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV66562 Defect: 202156 Description: UNIQUE CONSTRAINT ERROR ON LOCANCESTOR WHEN USING VIEW/MODIFY PARENTS IN THE LOCATIONS APP. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV75935 Defect: 192063 Description: MR IS NOT CLOSING AUTOMATICALLY WHEN ALL RESERVATIONS AGAINST THE MR IS CANCELLED. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV74220 Defect: 205238 Description: See Security Bulletin (CVE-2015-4944) http://www-01.ibm.com/support/docview.wss?uid=swg21963973 Database Scripts: HF7505_38.dbc Manual Changes: N/A --- APAR #: IV75595 Defect: 205252 Description: See Security Bulletin (CVE-2015-4967) http://www-01.ibm.com/support/docview.wss?uid=swg21966181 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78891 Defect: 205294 Description: PR DESCRIPTION IS BEING STORED IN SPANISH INSTEAD ENGLISH WHEN REORDERING ITEMS Database Scripts: N/A Manual Changes: N/A --- APAR #: IV77941 Defect: 204111 Description: IN GRAPHICAL ASSIGNMENT THE DURATION CHANGES WHEN YOU MOVE AN ASSIGNMENT, SAVE AND REFRESH Database Scripts: N/A Manual Changes: N/A --- APAR #: IV72572 Defect: 205244 Description: See Security Bulletin (CVE-2015-1933) http://www-01.ibm.com/support/docview.wss?uid=swg21965080 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV79220 Defect: 206913 Description: See security bulletin (CVE-2015-7487) http://www-01.ibm.com/support/docview.wss?uid=swg21698613 Database Scripts: N/A Manual Changes: N/A --- APAR #: IV79127 Defect: 205149 Description: WHEN DOING A PARTIAL TRANSFER AGAINST AN INTERNAL PO THE HARD RESERVATIONS ARE CLEARING. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV47186 Defect:179097 Description: THE ATTRIBUTES ON THE ASSET (GENERATED FROM THE ASSET TEMPLATE)IGNORE THE SEQUENCE AS DEFINED IN THE CLASSIFICATION. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78480 Defect: 209030 Description: User unable to save an asset in a clone of Assets application that does not contain data source "features_datasrc". Database Scripts: N/A Manual Changes: N/A --- APAR #: IV73773 Defect: 181903 Description: THE PUBLISHED BY FIELD NOT POPULATED AFTER A SCHEDULE IS PUBLISHED BACK TO THE WORK ORDERS. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV77555 Defect: 194419 Description: WHEN ISSUING FIFO/LIFO ITEMS WITH MULTIPLE UNIT COSTS THE ACTUAL COST AND LINE COST ARE INCORRECT. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV80106 Defect: 208835 Description: UNABLE TO SET LABEL TEXT COLOR IN A TABLE COLUMN Database Scripts: N/A Manual Changes: N/A --- APAR #: IV79650 Defect: 208167 Description: DUPLICATING RECORD WITHOUT SAVE CAUSING ISSUE Database Scripts: N/A Manual Changes: N/A --- APAR #: IV79723 Defect: 209945 Description: SCHEDULER CALENDAR SHOWS WRONG DAY OF WEEK FOR DATE IF MAXIMO USER IS IN A TIMEZONE BEHIND THAT OF APPLICATION SERVER Database Scripts: N/A Manual Changes: N/A --- APAR #: IV80150 Defect: 209045 Description: MAXIMUM CURSORS EXCEEDING ON ASSET WITH DATA RESTRICTION IN PLACE ON ASSET OBJECT RESULTING IN ERROR BMXAA6714E Database Scripts: N/A Manual Changes: N/A --- APAR #: IV79224 Defect: 208825 Description: ASSETS HAVING DECOMMISSIONED STATUS ARE NOT RETURNED FROM ATTRIBUTE SEARCH. Database Scripts: N/A Manual Changes: Change the value of system property mxe.app.assetcat.includesDecommissioned to 1 if you would like the decommissioned assets to be returned from Attribute Search. --- APAR: IV81268 Defect: 212050 Description: ABLE TO ADD LABOR ACTUAL TO WORK ORDER EVEN THOUGH THE ACCEPT CHARGES BOX IS NOT CHECKED ON WORK ORDER Database Scripts: N/A Manual Change: N/A --- APAR: IV78626 Defect: 208050 Description: ACTUALS NOT SAVED WHEN ENTERING BY CREW AND THERE IS AN UNSAVED WORK LOG Database Scripts: N/A Manual Change: N/A --- APAR: IV82065 Defect: 216327 Description: Cannot send an e-mail due to StringIndexOutOfBoundsException. Database Scripts: N/A Manual Change: N/A --- APAR #: IV80390 Defect: 218665 Description: A PM with a Storeroom fails to pass that Storeroom down to all child Work Orders created from Nested Job Plans. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV82918 Defect: 218182 Description: In the Linear Visual Control on the Specifications tab of the Assets application, when an attribute appears more than once on the asset and one of the attributes has a start measure that is less than and an end measure that is greater than the start measure and end measure, respectively, of the attribute that precedes it in the visual control, the attributes appear on the same line in the control and the label of the second displays on top of the label of the first. The attributes should not be on the same line. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78202 Issue(s): 218552 Description: SINGLE QUOTE IN ORGANIZATION'S NAME CAUSING ISSUES Database Scripts: N/A Manual Changes: N/A --- APAR #: IV790971 Issue(s): 217490 Description: When you change the status of a parent asset and the child asset is already the target status, a status history record is still written for the child asset. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV80690 Issue(s): 211273 Description: When creating a follow up service request from a work order for a linear asset, a primary MULTIASSETLOCCI record is not created and the asset's linear-related information is not populated on the new service request. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV78450 Issue(s): 225485 Description: In the Desktop Requistion application, the requisition line's Required Date is not defaulting correctly and may lead to an error indicating that the date is in the past and invalid: "BMXAA2990E: The required date cannot be earlier than today's date." Database Scripts: N/A Manual Changes: N/A --- APAR #: IV65844 Issue(s): 151511 Description: Using the Tech Tablet Everyplace application, wrong work order is selected from list tab. Database Scripts: N/A Manual Changes: N/A --- APAR #: IV80125 Issue(s): 216645 Description: AFTER ISSUING AN ITEM TO A WO FROM THE INVENTORY USAGE APP. THEASSET MOVE HISTORY OF THE ASSET DOES NOT SHOW THE WO NUMBER. Database Scripts: N/A Manual Changes: N/A --- APAR: IV84588 Defect: 224220 Description: UPDATING STANDARD COST ADJUSTMENT FOR ONE CONDITION, UPDATES OTHER CONDITION STANDARD COST INCORRECTLY TO 0 Database Scripts: N/A Manual Change: N/A --- APAR: IV86026 Defect: 230158 Description: INVENTORY ADJUSTMENTS DIALOGUE SHOWING INCORRECT VALUES WHEN STDCOST TRANSACTIONS UPDATED USING MIF MXINVBAL INTERFACE INVENTORY ADJUSTMENTS DIALOGUE SHOWING INCORRECT VALUES WHENSTDCOST TRANSACTIONS UPDATED USING MIF MXINVBAL INTERFACE Database Scripts: N/A Manual Change: N/A --- APAR: IV83950 Defect: 221893 Description: Preventive Maintenance does not generate all child PM work orders due to a null pointer exception that may be encountered when an asset has the same assetnum in multiple sites. Database Scripts: N/A Manual Change: N/A --- APAR: IV80824 Defect: 229755 Description: When Voiding on waiting for inspection (WINSP) Receipts, wrong To Location is referenced. Database Scripts: N/A Manual Change: N/A --- APAR: IV86026 (rework) Defect: 230158 Description: INVENTORY ADJUSTMENTS DIALOGUE SHOWING INCORRECT VALUES WHEN STDCOST TRANSACTIONS UPDATED USING MIF MXINVBAL INTERFACE INVENTORY ADJUSTMENTS DIALOGUE SHOWING INCORRECT VALUES WHENSTDCOST TRANSACTIONS UPDATED USING MIF MXINVBAL INTERFACE Database Scripts: N/A Manual Change: N/A --- APAR: IV90052 Defect: 248973 Description: TRANSTYPE=SSTDRECADJ NOT BEING CREATED IF USING SHIPMENT IN INVENTORY USAGE APPLICATION Database Scripts: N/A Manual Change: N/A --- APAR: IV90196 Defect: 249183 Description: TRANSFER OF ITEM BETWEEN TWO STORES USING INTERNAL PO GENERATES STDRECADJ TRANSACTION TWICE Database Scripts: N/A Manual Change: N/A --- APAR: IV85373 Defect: 241351 Description: ERROR IN LABOR REPORTING WHEN TRYING TO SELECT LABOR RECORDS WHOSE CONTRACT IS DIFFERENT FROM THE CONTRACT FROM DEFAULT CRAFT Database Scripts: N/A Manual Change: N/A --- APAR: IV88309 Defect: 248594 Description: Service Request work log is erased if not saved before using arrows to move Database Scripts: N/A Manual Changes: N/A =============================================================================================== VI. Notices =============================================================================================== This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan, Ltd. 19-21, Nihonbashi-Hakozakicho, Chuo-ku Tokyo 103-8510, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml. Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries. Java and all Java-based trademarks and logos are trademarks of Oracle and/or its affiliates. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Privacy Policy Considerations IBM Software products, including software as service solutions, ( Software Offerings ) may use cookies or other technologies to collect product usage information, to help improve the end user experience, to tailor interactions with the end user, or for other purposes. In many cases, no personally identifiable information is collected by the Software Offerings. Some of our Software Offerings can help enable you to collect personally identifiable information. If this Software Offering uses cookies to collect personally identifiable information, specific information about this offering s use of cookies is set forth below. Depending on the configuration that is deployed in the application server, this Software Offering may use session cookies for session management. These cookies can optionally be enabled or disabled, but disabling the cookies will also disable the functionality that they enable. See the application server documentation for additional information. Optionally, you can also use functionality, such as typeahead, to store data locally on the browser. The data that is stored locally could contain personally identifiable information. For more information, see the Data validation topic in the Maximo Asset Management Information Center: http://pic.dhe.ibm.com/infocenter/tivihelp/v49r1/topic/com.ibm.mbs.doc/designer/c_ctr_data_validation.html If the configurations that are deployed for this Software Offering provide you as customer the ability to collect personally identifiable information from end users by using cookies and other technologies, you should seek your own legal advice about any laws that are applicable to such data collection, including any requirements for notice and consent. For more information about the use of various technologies, including cookies, for these purposes, see IBM s Privacy Policy at http://www.ibm.com/privacy, IBM's Online Privacy Statement at http://www.ibm.com/privacy/details in the section entitled Cookies, Web Beacons and Other Technologies, and the IBM Software Products and Software-as-a-Service Privacy Statement at http://www.ibm.com/software/info/product-privacy.