IBM Support

Setting up an IBM Display Workstation to Generate a Host Print Screen

Troubleshooting


Problem

This document provides information on setting up an IBM display workstation to generate a host print screen rather than a local print screen.

Resolving The Problem

IBM display workstations have the ability to generate a local print screen where the information on the screen is printed directly to a parallel-attached printer or a system or host print screen where the information on the screen is used to generate a spooled file on the system. This document explains how to set up the most common IBM display workstations (namely the IBM InfoWindow 3477, IBM InfoWindow II 3486, and IBM InfoWindow II 3487 models) to generate a system or host print screen.

This document was last updated on 14 January 2009.

    • - Setting up an IBM InfoWindow 3477 to Generate a Host Print Screen (Rather Than a Local Print Screen)



      The following instructions are adapted from the IBM InfoWindow 3477 User's Guide (GA18-2923-00):

      1.While powered on, press the Setup key (or Shift + Setup on an IBM Enhanced keyboard) to enter Online setup mode.
      2.Move the cursor to "Set up printer", and press the Enter key.

                                                                                     
                                        Online Setup                                 
      ________________________________________________________________________________
      Move cursor to desired selection and press ENTER.                              
                                                                                     
                                                                                     
          Setup display                                                               
                                                                                     
          Browse display information                                                  
                                                                                     
          Set Up printer                                                             
                                                                                     
          Browse display information                                                  
                                                                                     
                                                                                     
                                                                                     
                                                                                     
                                                                                     
                                                                                     
                                                                                     
                                                                                     
                                                                                     
      F3=Exit                                                                        
      ________________________________________________________________________________
      SETUP      
      3Move the cursor to "Print key". Then, move the cursor to "System" and press the Space Bar key to select.

      This causes the display workstation to generate a host print screen on the IBM® System i® system when the Print key is pressed. If this is set to "Local", pressing the Print key causes the display workstation to generate a local print screen, printing the screen to a printer attached to the display workstation rather than generating a spooled file on the System i system.

      Note: The layout and options available on the "Set Up Printer" panel depend on the print character set selected in the "Set Up Printer" panels within Offline setup. The following example shows one layout of the "Set Up Printer" panel.

                                                                                     
                                        Set Up Printer                                
      ________________________________________________________________________________
      Move cursor to desired choice, then press SPACE BAR to select.                  
                                                                                     
      Lines per inch . . . . . . . . .  3        4       6       8                    
                                                                                     
      Characters per inch  . . . . . .  5       6       8.5      10                  
                                        12      17      PS                            
                                                                                     
      Print Quality. . . . . . . . . .  Draft    Letter    Enhanced                  
                                                                                     
                                                                                     
      Character height . . . . . . . .  Standard           Double                    
                                                                                     
      Print key  . . . . . . . . . . .  Local              System                     
                                                                                     
      Trim border  . . . . . . . . . .  Intensity                    Normal           
                                                                                     
                                                                                     
                                                                                     
                                                                                     
      F3=Save and Exit                                        Quit=Print cancel      
      ________________________________________________________________________________
      SETUP  
      4Press the F3 (Save and Exit) key to save the change and to exit Online Setup mode.
      5Sign on the system, press the Print key, and verify that a host print screen was generated. This will typically be a spooled file named QSYSPRT that is associated with the current interactive job. Therefore, the spooled file should usually be found by running the Work with Job (WRKJOB) command with the default parameter of JOB(*) and then selecting Option 4 (Work with spooled files).
      • - Setting up an IBM InfoWindow II 3486 or 3487 to Generate a Host Print Screen (Rather Than a Local Print Screen)



        The following instructions are adapted from the IBM InfoWindow II 3486 User's Guide (GA18-7097-0) and the IBM InfoWindow II 3487 User's Guide (GA18-7098-0):

        1.While powered on, press the Setup key (or Shift + Setup on an IBM Enhanced keyboard) to enter Online Setup mode.
        2.Move the cursor to "Set Up printer", and press the Enter key.

                                                                                       
                                          Online Setup                                 
        ________________________________________________________________________________
        Move cursor to desired selection and press ENTER.                              
                                                                                       
                                                                                       
            Setup display                                                              
                                                                                       
            Browse display information                                                  
                                                                                       
            Set up printer                                                             
                                                                                       
            Browse display information                                                  
                                                                                       
            Setup input devices                                                        
                                                                                       
            Setup calculator                                                            
                                                                                       
                                                                                       
                                                                                       
                                                                                       
                                                                                       
        F3=Exit                                                                        
        ________________________________________________________________________________
        SETUP              
        3.Move the cursor to "Print key". Then, move the cursor to "System", and press the Space Bar key to select.

        This causes the display workstation to generate a host print screen on the IBM System i system when the Print key is pressed. If this is set to "Local", pressing the Print key causes the display workstation to generate a local print screen, printing the screen to a printer attached to the display workstation rather than generating a spooled file on the System i system.

        Note: The options available on the "Set Up Printer" panel depend on if the display workstation is a monochrome model or color model. The Trim border option has choices of "Intensity" and "Normal" for monochrome displays and has choices of "White" and "Green" for color displays. The following example shows the layout for the color model.
                                                                                       
                                          Set Up Printer                                
        ________________________________________________________________________________
        Move cursor to desired choice, then press SPACEBAR to select.                  
                                                                                       
        Lines per inch . . . . . . . . .  3         4        6       8                  
                                                                                       
        Characters per inch  . . . . . .  5         6        8.5        10              
                                          12        17       PS                        
                                                                                       
        Print Quality. . . . . . . . . .  Draft    Letter    Enhanced                  
                                                                                       
                                                                                       
        Character height . . . . . . . .  Standard           Double                    
                                                                                       
        Print key  . . . . . . . . . . .  Local              System                     
                                                                                       
        Trim border  . . . . . . . . . .  White              Green                     
                                                                                       
        Form Feed after print  . . . . .  Yes                No                        
        Press F10 for the attached printer initialization                               
                                                                                       
        F3=Save and Exit                                   Quit=Print cancel      
        ________________________________________________________________________________
        SETUP        
        4.Press F3 (Save and Exit) to save the change and to exit Online Setup mode.
        5.Press the Setup key (or Shift + Setup on an IBM Enhanced keyboard) to enter communication mode.
        6.Sign on the system, press the Print key, and verify that a host print screen was generated. This is typically be a spooled file named QSYSPRT that is associated with the current interactive job. Therefore, the spooled file is found by running the Work with Job (WRKJOB) command with the default parameter of JOB(*) and selecting Option 4 (Work with spooled files).


      For More Information

      For more information, refer to the following IBM publications:

      IBM InfoWindow 3477 User's Guide (GA18-2923)
      IBM InfoWindow II 3486 User's Guide (GA18-7097)
      IBM InfoWindow II 3487 User's Guide (GA18-7098)

      Note: The IBM InfoWindow and IBM InfoWindow II User's Guide manuals are not available online in Adobe Acrobat PDF format and are no longer available for purchase from IBM Publications. However, a hard-copy of the User's Guide manual would have been shipped with the IBM InfoWindow or IBM InfoWindow II display device.
      [{"Type":"MASTER","Line of Business":{"code":"LOB57","label":"Power"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SWG60","label":"IBM i"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"6.1.0"}]

      Historical Number

      423346807

      Document Information

      More support for:
      IBM i

      Software version:
      6.1.0

      Operating system(s):
      IBM i

      Document number:
      637355

      Modified date:
      18 December 2019

      UID

      nas8N1014833

      Manage My Notification Subscriptions