IBM Support

SCSI error codes - Netfinity 4500R

Troubleshooting


Problem

SCSI error codes for the Netfinity 4500R.

Resolving The Problem

This document is intended for trained servicers who are familiar with IBM Personal Computer products. Use this document along with advanced diagnostic tests to troubleshoot problems effectively. Before servicing an IBM product, be sure to review the safety information. Click here to review safety information.

Error Code FRU/Action

All SCSI Errors
One or more of the following might be causing the problem:

  • A failing SCSI device (adapter, drive, controller)
  • An improper SCSI configuration or SCSI termination jumper setting
  • Duplicate SCSI IDs in the same SCSI chain
  • A missing or improperly installed SCSI terminator
  • A defective SCSI terminator
  • An improperly installed cable
  • A defective cable
  1. External SCSI devices must be powered-on before you power-on the server.
  2. The cables for all external SCSI devices are connected correctly.
  3. If you have attached an external SCSI device to the server, make sure the external SCSI termination is set to automatic.
  4. The last device in each SCSI chain is terminated correctly.
  5. The SCSI devices are configured correctly.

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN13","label":"Older System x->Netfinity 4500R"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
28 January 2019

UID

ibm1MIGR-4K5PPU

Page Feedback