IBM Support

Release Notes for Dynamic Workload Console Version 10.2.4

Fix Readme


Abstract

This document provides important information about Dynamic Workload Console Version 10.2.4

Content

Dynamic Workload Console version 10.2.4 Release Notes

This document provides important information about Dynamic Workload Console version 10.2.4.

Note: The official IBM documentation is set to be released shortly, and the links pointing to it in this document are not yet functional.

Features introduced with version 10.2.4

IBM Workload Scheduler version 10.2.4 contains the following enhancements:

 

Dynamic Workload Console and master domain manager are not supported on AIX operating systems in version 10.2.4. However, support will be reinstated in version 10.2.5.

Performance optimization

Tests conducted on IBM Workload Scheduler version 10.2.4 have highlighted the following performance enhancements compared to the previous version:

Improved dynamic agent memory management

In IBM Workload Scheduler version 10.2.3, the dynamic agent would consume 300 MB of memory daily without releasing it when handling 600,000 job submissions.

With the new 10.2.4 version, under the same load of 600,000 job submissions, not only the dynamic agent now releases memory, but it also exhibits negligible memory consumption.

Orchestration Monitor query performance boost

Query results displayed in the Orchestration Monitor now appear in one-third of the time compared to the Workload Monitor.

 

Helpful videos demonstrating new features are available on Workload Automation YouTube channel.

APARs and defects fixed in version 10.2.4

This section lists APARs resolved in version 10.2.4

Table 1. APARs addressed in version 10.2.4
APARDESCRIPTION
IJ36400Agents are not updated when using Centralized Agent Update on V9.5.0.X jobs
IJ40460When changing the quantity for Monitor Resources or Dependencies in Dynamic Workload Console, errors AWSUI4064E and EQQY728E are returned.
IJ46220The Workload Designer on Dynamic Workload Console V10.1 loops if used with z/OS engines on any operating system.
IJ46670The Sort function on the Dynamic Workload Console does not work.
IJ47500Dynamic Workload Console allows user passwords that are longer than 31 characters.
IJ47827Audit log output does not display content after performing Cancel operation in Workload Scheduler V10.1.
IJ50183Impossibility to save a job stream when the Latest start time value is 12:00 AM and the Delay for days value is 0.
IJ50183When creating a job stream definition on the Workload Designer of the Dynamic Workload Console, the Apply to each job checkbox cannot be selected.
IJ50623Dynamic Workload Console returns OutOfMemory error on the generated Javacore file.
IJ50649Some users have incorrect roles when logging into the Dynamic Workload Console.
IJ51072The Export settings feature includes partial Custom Dashboards data.
IJ51198Impossibility for non-administrator and non-dwcadmin IDS to create an engine under Manage Engines page.
IJ51402The Dynamic Workload Console needs to provide a response to dismiss the "loading items..." model error condition.
IJ52269Orchestration Monitor issues.
IJ52317Issue occurs when updating job or job stream Earliest start time field from the Orchestration Monitor.
IJ52318Job names truncated to 22 characters when checking job streams and jobs from the Workload Designer.
IJ52359The Dynamic Workload Console displays 'UNDEFINED' word on job names.
IJ52877Job stream definitions are not correctly displayed in the Dynamic Workload Console.
IJ52913Edit JCL bug.
IJ53016Dynamic Workload Console V10.2.2 does not accept 1 characters sub-domains for the hostname field of a z/OS engine connection.
IJ53058Impossibility to view more than 250 Operator messages.
IJ53110When setting a job on hold status in the Orchestration Monitor, the job is displayed as waiting and not as held.
IJ53179Some features in the Orchestration Monitor in Dynamic Workload Console V10.2.2 are not working properly.
IJ53218Vulnerabilities in the Dynamic Workload Console.
IJ53223Manage Workload Security: Security domain filter is unable to add entries under Event rule.
IJ53326Dynamic Workload Console does not update the status when a job is confirm succ from fault-tolerant agent.
IJ53329AWSJCO109E error occurs when saving an event rule with a generic action plug-in.
IJ53387The system is accepting start time as 00:01 AM, but not accepting start time as 00:00 AM.
IJ53403IN Dynamic Workload Console V9.5 Fix Pack 5 OS LANG=JA_JP.UTF8, an Unparseable date warning is displayed when trying to put a valid date in an event rule.
IJ53466Edit job in plan is failing if streamlogon contains a "\".
IJ53575The SQL generated by configuredb.sh for Dynamic Workload Console V10.2.3 with a z/OS DB2 contains an incorrect Create tablespace statement.
IJ53618Impossibility to create or edit RESTful jobs from Dynamic Workload Console after RESTful plug-in upgrade to V10.2.0.08.
IJ53644Issue when selecting the jobs dependencies under job streams > dependencies > jobs in V10.2.2.
IJ53654Upgrade of Dynamic Workload Console on z/OS (configuredb.sh script) generates incorrect SQL statement reorg table.
IJ53656Blank page while editing event rules when using a custom event plug-in which was not being parsed correctly by the parser.
IJ53722Agent resulting correctly linked both on Dynamic Workload Console and conman, but not actually linked, and sometimes even the agent is down.
IJ53722Dynamic Agent is down but shows linked and running on master domain manager.
IJ53725Impossibility to select a workstation class using the Workload Designer.
IJ53741Impossibility to sort folders with the same name in the resource.
IJ53760Orchestration Monitor cannot query "Workstation (job)".
IJ53809Number of job different on Orchestration Monitor and Monitor Workload.
IJ53836Exporting workload application template fails when the job stream is associated to an event rule.
IJ53894Issue while creating or editing job using multiple variables.
KB0103062Dynamic Workload Console V9.5 fix pack 6 Workload Designer does not show the job tabs when browser language setting is Chinese (DBCS).
KB0106120The Agent is not showing the correct version in the Dynamic Workload Console after upgrading from V10.1 to V10.1 Fix Pack 3.
KB0108804The Dynamic Workload Console is not able to search z/OS jobs on Z shadow job creation.
KB0117678Dynamic Workload Console V10.2.2 does not install on new RHEL 9 server.
KB0119660New graphical designer does not select the right day when creating calendars.

Fixed defects

The following defects have been resolved:

Table 2. Fixed defects
DEFECT NUMBERDESCRIPTION
WA-117605Plug-in: Dynamic Workload Console fields are not filled after Restful job creation.
WA-124150Orchestration Monitor: folder filter is case sensitive.
WA-128817Orchestration Monitor: job properties do not show information about the recovery job for Rerun option.
WA-131444Submitted job stream from Workspace area without Published as a service option is shown in Self-Service Catalog My request page.
WA-135725Orchestration Monitor: The message in the save modal is not translated on z/OS environments.
WA-136330Graphical Designer: workstation search shows all wk types even though the field should only accept one type.
WA-138615Graphical Designer: links layer is above selected items layer.
WA-139030Mirroring Orchestration Monitor: the Advanced query for Remote engine workstation does not work.
WA-139035Private label settings: logo and icon take a very long time to load.
WA-139036Graphical Designer: After deleting a job stream from Assets, the job stream is not deleted from the workspace.
WA-139161Graphical Designer: while adding constraints, the search field prompt is missing in the default prompt.
WA-139818Graphical Designer: a white bar appears in the workspace that should not be there.
WA-140621z/OS run cycle group: subset option is enabled in view mode.
WA-141015Orchestration Monitor: in the job stream properties, the values for Duration Forecast is missing.
WA-141963Graphical Designer: workstation search shows all workstation types even though the field should only accept one type
WA-142004Wait job: in the graphical of the job wait the lowercase characters inserted in the Action are not managed
WA-142012From Workload Designer it is not possible to add dates to a calendar created in Graphical Designer
WA-142168Graphical Designer: workstation search shows all workstation types even though the field should only accept one type
WA-142255Graphical Designer: workstation search shows all workstation types even though the field should only accept one type
WA-142641When adding a Run cycle group, the error count in the Rule section increases when selecting a different rule type.
WA-142788Mirroring in Orchestration Monitor: National characters are not supported in plan filter
WA-143155Graphical Designer Name field missing in Prompt panel
WA-143158User Principal Name (UPN) not supported in Graphical Designer
WA-143199Graphical Designer: AWSJCO043E error returned while adding new credentials
WA-143220Graphical Designer: Unable to create any object if security is set to only use from a folder
WA-143313Mirroring Orchestration Monitor: hyperlink on workstation name does not work.
WA-143406Workload Designer: Adding a new resource displays the "Cannot deserialize value" error.
WA-143418Graphical Designer: The Load more button missing.
WA-143463
Graphical Designer: Duplicate credential problems with PostgreSQL database.

Note

This issue has been resolved for new installations; however, it may reoccur during upgrades. Our development team is actively working on a permanent solution and will address it as soon as possible.

WA-143477Workload designer: The sorter returns all the objects and not just those of the selected folder.
WA-143484Graphical Designer: some objects are missing in assets view.
WA-143494Orchestration Monitor: Checkboxes are unchecked when the headers column is resized.
WA-143580Graphical Designer: Add a limit to name length in run cycles.
WA-143597Move up and Move down option are not working properly in selected column fields and scrollbar should not accordingly. Issue found using in Chrome browser, on Workstation, Job, Critical job, and Job stream.
WA-143678Graphical Designer: Wrong maximum limit in run cycle names.
WA-143713Dynamic Workload Console 10.2.4 PostgreSQL: PlanView does not work.
WA-143719Graphical Designer: Special characters should not be supported in run cycle names.
WA-143757Graphical Designer: job definition name with wrong maximum limit.
WA-143770Graphical Designer: AWSJCO043E error received while editing user credentials.
WA-143949Graphical Designer: Quantity field not working properly in Resource dependency panel.

Resolved Common Vulnerabilities and Exposures (CVE)

The following CVEs have been resolved:

  1. CVE-2025-27363
  2. CVE-2024-45338

Known limitations and workarounds

The following are software limitations and workarounds that affect Dynamic Workload Console 10.2.4:

Unexpected duplicate entries in database indexes when upgrading and using a PostgreSQL database

Duplicate entries may unexpectedly appear in database indexes when performing an upgrade and using a PostgreSQL database.

Jobs and dependencies in job streams might not be displayed when using composer display or extract commands with a PostgreSQL database

While job and dependency information exists in the database, it might not be visible when using the composer display or extract commands with a PostgreSQL database. This issue is purely visual and does not affect job scheduling: job streams and their respective jobs continue to run as expected when loaded into the plan. The defect solely impacts how job stream details are displayed.

SAP jobs and Shadow jobs cannot be created nor edited from the Graphical Designer

 

SAP and Shadow job definitions cannot be created nor edited from the Graphical Designer.

 

Job streams dragged into the Graphical Designer workspace keep loading

 

Job streams might remain in a loading state when they are dragged from the Assets panel into the workspace.

Workaround

The issue is fixed by dragging the same job stream into the workspace again.

Error screen appears while monitoring jobs on the Orchestration Monitor

During the monitoring of jobs from the Orchestration Monitor on distributed engines, selecting Dependencies or Rerun options might result in the display of an error screen.

 
 

Workaround

 

If the issue occurs, perform the following steps:

  1. Browse to the following path: /opt/wa/TWA/usr/servers/engineServer/apps/TWSEngineModel.ear/WD.war/monitor/common
  2. Open the jobInPlan.json file, and edit the id value under fieldPaths as follows:

    "fieldPaths": {
        "id": "id",
  3. Delete the cache folder located in the following path: /opt/wa/TWA/usr/servers/engineServer/apps/TWSEngineModel.ear/WD.war/WEB-INF
  4. Delete the monitorWorkloadCache folder located in the following path: /opt/wa/DWC/usr/servers/dwcServer/dwc_workarea

Federator does not always perform the automatic clean up of archived records

Archived records that are stored by the Federator into the database used, if any, are not always auto deleted according to the cleanup policy set in the fed_variables.xml file.

Workaround
To delete those records, you must run the extend command, or perform a plan refresh.

The Federator does not clean up database from old engines

 

Old engines that are stored by the Federator into the database used, if any, are not deleted.

Workaround

To delete those records, you must manually run a query on the database.

The Federator does not support Db2 for z/OS

 

You can use the Federator with all databases supported by the Dynamic Workload Console, with the exception of Db2 for z/OS.

Database load failure with special characters

When using non-American codepages on a z/OS engine, special characters in job stream, workstation, and job names cause database loading failures, resulting in items not being visible in the Orchestration Monitor.

 

Discovered z/OS engines are only usable in the Orchestration Monitor

 

After you have registered a z/OS engine to the Federator, it is added to the list of discovered engines, which are only usable in the Orchestration Monitor. To make all the other Dynamic Workload Console functions available to z/OS engines, you must define them manually on the Dynamic Workload Console.

 

Hyphens not supported in configuredb script when using a PostgreSQL database

 

When specifying names containing hyphens in the configuredb script for a PostgreSQL database, enclose the name within backslashes and double quotes, as follows: \”user_name\”

 

Japanese characters might display incorrectly in job logs on Windows for Dynamic Workload Console and fault-tolerant agents

Job logs containing Japanese characters might appear garbled when viewed in the Dynamic Workload Console or when using the command line on fault-tolerant agents running on Windows operating systems.

Workaround

To resolve this issue, set a Windows environment variable that points to the IBM Workload Scheduler home directory, for example:

TWS_TISDIR=C:\FTA\TWS

Interoperability tables

In the table in this section the following acronyms are used:

Table 3. Acronym table
AcronymExtended form
DDMdynamic domain manager or backup dynamic domain manager
DWCDynamic Workload Console
MDMmaster domain manager

The following table shows which components are compatible with previous Dynamic Workload Console versions:

Engine versionManage Workload DefinitionsWorkload DesignerGraphical DesignerMonitor WorkloadOrchestration Monitor
IBM Workload Scheduler v10.2.3 onward
IBM Workload Scheduler v10.x ✔ from v10.2.x
IBM Workload Scheduler v9.5.x   
IBM Workload Scheduler z/OS v10.2 
IBM Workload Scheduler z/OS v10.1  
IBM Workload Scheduler z/OS v9.x.x   

 

Compatibility scenarios and limitations

You are strongly recommended to maintain all IBM Workload Scheduler components at the latest version level as regular maintenance activity. Keeping your environment consistent also ensures you can implement the new features available with each release.

Package structure

For a detailed list of available packages, see the 10.2.4 Quick Start Guide document available from IBM Fix Central.

Installing and upgrading to version 10.2.4

This section describes how to install and upgrade the Dynamic Workload Console to version 10.2.4.

Before getting started, verify that the following requirements are met:

  • The Dynamic Workload Console is active.
  • No user is connected to the Dynamic Workload Console to prevent the data related to their working session from being lost.

Installation notes

  • Ensure you have installed the required prerequisite software. To obtain the latest information about software requirements for IBM Workload Scheduler, run the Detailed Software Requirements report and browse to the relevant section.
  • The formal test phase was performed using WebSphere Application Server Liberty Base 25.0.0.3. The minimum required version of WebSphere Application Server Liberty Base is 24.0.0.9.
  • The formal test phase of the Dynamic Workload Console installed in a z/OS environment was performed using WebSphere Application Server Liberty Base 24.0.0.9. The minimum required version of WebSphere Application Server Liberty Base is 24.0.0.9.
  • Before performing an upgrade, check whether the ssl_config.xml file is present in the overrides folder. If the file is present, check the verifyHostname option in the twaSSLSettings section. The  verifyHostname must be set to false, as shown in the following example:

    <ssl id="twaSSLSettings" keyStoreRef="twaKeyStore" trustStoreRef="twaTrustStore" sslProtocol="TLSv1.2" 
    clientAuthenticationSupported="true" verifyHostname="false"/>
  • Depending on the WebSphere Application Server Liberty version you are using, you might encounter the problems described in the following technotes:

Versions equal to or higher than 24.0.0.8

See Possible IWS compatibility issues with Liberty 24.0.0.8 or higher

Versions ranging from 24.0.0.3 to 24.0.0.8

See Dynamic Workload Console is not able to open "Monitor Event Rules" nor "Manage workload security" with OpenID authentication

Upgrade notes

If you are using MSSQL and are upgrading from a release earlier than 10.2.3, perform the steps listed below after upgrading to the current version. If you are using MSSQL and are upgrading from release 10.2.3 or a release later than 10.2.3, you can ignore the steps listed below.

  1. Browse to the datasource.xml template.
  2. Open the file with a text editor and perform the following changes:
    1. Add the lines listed below after the db.driver.path parameter:

      <variable name="db.encrypt" value="false"/>
      <variable name="db.trustServerCertificate" value="false"/>
    2. Append the following strings at the end of the value of the mssql.URL parameter:

      ;encrypt=${db.encrypt};trustServerCertificate=${db.trustServerCertificate}
    3. Add the lines listed below after the integratedSecurity parameter:

      encrypt="${db.encrypt}"
      trustServerCertificate="${db.trustServerCertificate}"

      The resulting file looks as follows. The modified sections are highlighted in bold:

      ...	
      	<variable name="db.driver.path" value="<db_driver_path>"/>
      	<variable name="db.encrypt" value="false"/>
      	<variable name="db.trustServerCertificate" value="false"/>
      	<variable name="mssql.URL" value="jdbc:sqlserver://${db.serverName}:${db.portNumber};databaseName=${db.databaseName}
             ;encrypt=${db.encrypt};trustServerCertificate=${db.trustServerCertificate}"/>
      
      	<jndiEntry value="MSSQL" jndiName="db.type" />
      ...
      		    integratedSecurity="false"
      		    encrypt="${db.encrypt}"
      		    trustServerCertificate="${db.trustServerCertificate}"
  3. Stop and restart WebSphere Application Server Liberty to make the changes effective.

Installation and upgrade procedures

You can install the release using the procedure described in Installing from the CLI.

You can upgrade to the current release using the procedure described in Upgrading from the CLI.

Disk space requirements

To obtain the latest information about permanent disk space requirements when installing on supported operating systems, run the Hardware requirements report and click on the relevant operating system link.

Documentation updates

Any additions or changes to the documentation as a result of this release have been integrated into the online product documentation available in IBM Workload Scheduler product information.

Contacting IBM Software Support

Before contacting IBM Software Support with a problem, refer to the IBM Software Support site by accessing the following Web address: http://www.ibm.com/software/support

To access IBM support, click the IBM support link at the bottom right of the page.

If you want to contact IBM Software Support, see the IBM Software Support Handbook at the following Web site: http://techsupport.services.ibm.com/guides/handbook.html

The guide provides information about how to contact IBM Software Support, depending on the severity of your problem, and the following information:

  • Registration and eligibility.
  • Telephone numbers, depending on the country in which you are located.
  • Information you must have before contacting IBM Software Support.

Notices

This information was developed for products and services offered in the US. This material might be available from IBM in other languages. However, you may be required to own a copy of the product or product version in that language in order to access it.

IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:

IBM Director of Licensing
IBM Corporation
North Castle Drive, MD-NC119
Armonk, NY 10504-1785
US

 

For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:

Intellectual Property Licensing
Legal and Intellectual Property Law
IBM Japan Ltd.
19-21, Nihonbashi-Hakozakicho, Chuo-ku
Tokyo 103-8510, Japan

 

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Any references in this information to non-IBM websites are provided for convenience only and do not in any manner serve as an endorsement of those websites. The materials at those websites are not part of the materials for this IBM product and use of those websites is at your own risk.

IBM may use or distribute any of the information you provide in any way it believes appropriate without incurring any obligation to you.

Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:

IBM Director of Licensing
IBM Corporation
North Castle Drive, MD-NC119
Armonk, NY 10504-1785
US

 

Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.

The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.

The performance data discussed herein is presented as derived under specific operating conditions. Actual results may vary.

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

This information is for planning purposes only. The information herein is subject to change before the products described become available.

This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to actual people or business enterprises is entirely coincidental.

COPYRIGHT LICENSE:

This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs.

© (IBM) (2024).
Portions of this code are derived from IBM Sample Programs.
© Copyright IBM Corp. _2024_.

Trademarks

IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.

Adobe™, the Adobe logo, PostScript™, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries.

IT Infrastructure Library™ is a Registered Trade Mark of AXELOS Limited.

Linear Tape-Open™, LTO™, the LTO Logo, Ultrium™, and the Ultrium logo are trademarks of HP, IBM Corp. and Quantum in the U.S. and other countries.

Intel™, Intel logo, Intel Inside™, Intel Inside logo, Intel Centrino™, Intel Centrino logo, Celeron™, Intel Xeon™, Intel SpeedStep™, Itanium™, and Pentium™ are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Linux™ is a registered trademark of Linus Torvalds in the United States, other countries, or both.

Microsoft™, Windows™, Windows NT™, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.


Java Logo
Java™ and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates.

Cell Broadband Engine™ is a trademark of Sony Computer Entertainment, Inc. in the United States, other countries, or both and is used under license therefrom.

ITIL™ is a Registered Trade Mark of AXELOS Limited.

UNIX™ is a registered trademark of The Open Group in the United States and other countries.

Terms and conditions for product documentation

Permissions for the use of these publications are granted subject to the following terms and conditions.

Applicability

These terms and conditions are in addition to any terms of use for the IBM website.

Personal use

You may reproduce these publications for your personal, noncommercial use provided that all proprietary notices are preserved. You may not distribute, display or make derivative work of these publications, or any portion thereof, without the express consent of IBM.

Commercial use

You may reproduce, distribute and display these publications solely within your enterprise provided that all proprietary notices are preserved. You may not make derivative works of these publications, or reproduce, distribute or display these publications or any portion thereof outside your enterprise, without the express consent of IBM.

Rights

Except as expressly granted in this permission, no other permissions, licenses or rights are granted, either express or implied, to the publications or any information, data, software or other intellectual property contained therein.

IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of the publications is detrimental to its interest or, as determined by IBM, the above instructions are not being properly followed.

You may not download, export or re-export this information except in full compliance with all applicable laws and regulations, including all United States export laws and regulations.

IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE PUBLICATIONS ARE PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.

[{"Type":"MASTER","Line of Business":{"code":"LOB77","label":"Automation Platform"},"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSGSPN","label":"IBM Workload Scheduler"},"ARM Category":[{"code":"a8m3p000000UoZVAA0","label":"Continuous Delivery"}],"ARM Case Number":"","Platform":[{"code":"PF012","label":"IBM i"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"10.2.4"}]

Document Information

Modified date:
04 November 2025

UID

ibm17183157