Troubleshooting
Problem
This document shows the DSNX reinitialization process.
Resolving The Problem
To reinitialize the DSNX environment on the IBM® OS/400® or IBM® i5/OS® system, do the following:
| 1 | Vary off the SNUF device. |
| 2 | End the QDSNX subsystem. If the SNUF device runs under another subsystem (for example, QINTER), that subsystem should also be ended. |
| 3 | Delete the QDSNX library. |
| 4 | Issue the following command: CALL QDXINST ('1' ' ') Note: The space is after the '1' and within the second set of ' '. This CALL is passing two parameters, a '1' and a ' ' (space). |
| 5 | Start the QDSNX subsystem and the SNUF device subsystem, if different. |
| 6 | Vary on the SNUF device. |
[{"Type":"MASTER","Line of Business":{"code":"LOB57","label":"Power"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SWG60","label":"IBM i"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"6.1.0"}]
Historical Number
8203647
Was this topic helpful?
Document Information
Modified date:
18 December 2019
UID
nas8N1010185