Preventive Service Planning
Abstract
Configuration Information for Quantum Scalar i3 and i6
Content
Quantum Scalar i3 Capacity
No. of Modules
|
Form Factor
|
Max Drives
& Addresses |
Max Storage Slots
& Addresses |
Changer Address
|
Number of I/O Slots
& Addresses |
1 (1CM)
|
3U
|
3 drives
(256-258) |
50 slots
(4096-4145) |
1
|
5 slots (16-20)
|
2 (1CM, 1EM)
|
6U
|
6 drives
(256-261) |
100 slots
(4096-4195) |
1
|
5 slots (16-20)
|
3 (1CM, 2EM)
|
9U
|
9 drives
(256-264) |
150 slots
(4096-4245) |
1
|
5 slots (16-20)
|
4 (1CM, 3EM)
|
12U
|
12 drives
(256-267) |
200 slots
(4096-4295) |
1
|
5 slots (16-20)
|
Quantum Scalar i6 Capacity
No. of Modules
|
Form Factor
|
Max Drives
& Addresses |
Max Storage Slots
& Addresses |
Changer Address
|
Number of I/O Slots
& Addresses |
1 (1CM)
|
6U
|
3 drives
(256-258) |
100 slots
(4096-4195) |
1
|
10 slots (16-25)
|
2 (1CM, 1EM)
|
12U
|
6 drives
(256-261) |
200 slots
(4096-4295) |
1
|
10 slots (16-25)
|
3 (1CM, 2EM)
|
18U
|
9 drives
(256-264) |
300 slots
(4096-4395) |
1
|
10 slots (16-25)
|
4 (1CM, 3EM)
|
24U
|
12 drives
(256-267) |
400 slots
(4096-4495) |
1
|
10 slots (16-25)
|
5 (1CM, 4EM)
|
30U
|
15 drives
(256-270) |
500 slots
(4096-4595) |
1
|
10 slots (16-25)
|
6 (1CM, 5EM)
|
36U
|
18 drives
(256-273) |
600 slots
(4096-4695) |
1
|
10 slots (16-25)
|
7 (1CM, 6EM)
|
42U
|
21 drives
(256-276) |
700 slots
(4096-4795) |
1
|
10 slots (16-25)
|
8 (1CM, 7EM)
|
48U
|
24 drives
(256-269) |
800 slots
(4096-4895) |
1
|
10 slots (16-25)
|
Notes:
1. Quantum i3 Capacity
12 drives 200 slots
2. Quantum i6 Capacity
24 drives 800 slots
3. ELEMent=AUTODetect in the DEFINE/UPDATE DRIVE command is supported.
4. Quantum Scalar i3 is available with the following half-height Fiber Channel and SAS drives:
5. Quantum Scalar i6 is available with the following full-height Fiber Channel drives:
6. Ultrium 8 (LTO-8) support requires IBM Spectrum Protect version 8.1.5 or subsequent maintenance release
7. Ultrium 9 (LTO-9) support requires IBM Spectrum Protect version 8.1.13 or subsequent maintenance release
8. Mixed generation LTO's (drive and media) support requires IBM Spectrum Protect version 8.1.6 or subsequent maintenance release
9. Device identifications and firmware levels used during validation
Quantum Scalar i3
(validated with IBM Spectrum Protect 7.1.6)
Library ID: Quantum Scalar i3-i6 --- Firmware: 110G
Drive ID: IBM ULTRIUM-HH7 --- Firmware: G9Q1
(validated with IBM Spectrum Protect 8.1.4)
Library ID: Quantum Scalar i3-i6 --- Firmware: 150G
Drive ID: IBM ULTRIUM-HH8 --- Firmware: HB81
(validated with IBM Spectrum Protect 8.1.6)
Library ID: Quantum Scalar i3-i6 --- Firmware: 150G
Drive ID: IBM ULTRIUM-HH8 --- Firmware: HB83
Drive ID: IBM ULTRIUM-HH7 --- Firmware: HB81
(validated with IBM Spectrum Protect 8.1.14.100)
Library ID: Quantum Scalar i3-i6 --- Firmware: 278G
Drive ID: IBM ULTRIUM-HH9 --- Firmware: NCA1
Drive ID: IBM ULTRIUM-HH8 --- Firmware: N9M1
Quantum Scalar i6
(validated with IBM Spectrum Protect 8.1.1)
Library ID: Quantum Scalar i3-i6 --- Firmware: 111G
Drive ID: IBM ULTRIUM-TD7 --- Firmware: G9Q4
(validated with IBM Spectrum Protect 8.1.4)
Library ID: Quantum Scalar i3-i6 --- Firmware: 150G
Drive ID: IBM ULTRIUM-TD8 --- Firmware: HB80
(validated with IBM Spectrum Protect 8.1.6)
Library ID: Quantum Scalar i3-i6 --- Firmware: 150G
Drive ID: IBM ULTRIUM-TD8 --- Firmware: HB82
Drive ID: IBM ULTRIUM-TD7 --- Firmware: HB80
(validated with IBM Spectrum Protect 8.1.13)
Library ID: Quantum Scalar i3-i6 --- Firmware: 278G
Drive ID: IBM ULTRIUM-TD9 --- Firmware: NCA0
Drive ID: IBM ULTRIUM-TD8 --- Firmware: N9M0
(validated with IBM Spectrum Protect 8.1.13)
Library ID: Quantum Scalar i500 --- Firmware: 278G
Drive ID: IBM ULTRIUM-TD9 --- Firmware: NCA0
Drive ID: IBM ULTRIUM-TD8 --- Firmware: N9M0
Library ID: Quantum Scalar i6000 --- Firmware: 278G
Drive ID: IBM ULTRIUM-TD9 --- Firmware: NCA0
Drive ID: IBM ULTRIUM-TD8 --- Firmware: N9M0
- IBM Atape Driver for AIX: Atape 12.10.4.0
- IBMTape Driver for Windows x64: IBMTape 6.2.5.5
- IBM lin_tape Driver for Linux x64: IBM lin_tape 3.0.1
11. Quantum Scalar i6 supports IBM Control Path Failover Support for Tape Libraries, and IBM Data Path Failover and Load Balancing Support for Tape Drives with Fiber Channel drives and the following drivers:
- IBM Atape Driver for AIX: Atape 12.10.4.0
- IBMTape Driver for Windows x64: IBMTape 6.2.5.5
- IBM lin_tape Driver for Linux x64: IBM lin_tape 3.0.1
12. The IBM device driver is required for the IBM Ultrium drives. IBM device drivers are available at IBM Fix Central. Choose the following options from the drop-down menus.
- Product Group -> System Storage
- System Storage -> Tape systems
- Tape systems -> Tape drivers and software
- Tape drivers and software -> Tape device drivers
- Platform -> select device driver for your platform
Was this topic helpful?
Document Information
Modified date:
05 May 2022
UID
swg21994263