QRadar M6 xSeries firmware V6.0.0 for 1U and 2U appliances (IMG for USB On-prem installations)

Part 1: About the M6 firmware 6.0.0 update

Creating your USB flash drive for the firmware update requires a Windows™ host and the administrator must be on-site with the appliance. The firmware update can take up to 60 minutes complete per appliance and the administrator is required to reboot the appliance after the firmware installation completes. The firmware upgrade procedures are intended to be completed during scheduled maintenance hours for your QRadar appliances. If your Data Center does not allow USB keys, instructions and a download are available for administrators to install firmware remotely with the XClarity interface. For information on how to install the ISO with your XClarity interface, see https://www.ibm.com/support/pages/node/6335251.

Supported appliances, types, and model information

This firmware update applies to the following IBM Security QRadar M6 (1U and 2U form factor) appliance types:

Hardware	Details
Appliance and Machine type models (MTM)	IBM QRadar Network Insights Appliance 1901 G2 (4563-F8Y) IBM QRadar Network Insights Appliance 1910 G2 (4563-F7Y) IBM QRadar Network Insights Appliance 1920 G2 (4563-F5F) IBM QRadar Core Appliance XX29 G2 (4563-Q4A) IBM QRadar Core Appliance XX48 G2 (4563-Q5B) IBM QRadar Core Appliance XX05 G4 (4563-Q3E) IBM QRadar Incident Forensics Appliance G4 (4563-F3A) IBM QRadar Event/QFlow Collector Appliance 1501/1201 G4 (4563-Q5D) IBM QRadar Network Packet Capture Appliance G2 (4563-F3C)
Server Type	M6
Server Machine Type	SR630 / M6 1U SR650 / M6 2U

Table 1: List of QRadar appliances the M6 firmware 6.0.0 can update.

Important file changes and prerequisites in this firmware update

Table 2: Firmware versions and any prerequisite for each component are provided in this table.

NOTES

• A number of hard disk drives can be installed in this appliance. The HDD update tool examines the hard disk drives that are present and selects the latest firmware version that is available for your drive.
• The base system pack might contain other firmware packages that are not present in QRadar appliances. Firmware updates from the base system pack can be listed when the tool compares available firmware to the hardware in the appliance and display a status of "undetected".
• For firmware questions and information see: http://ibm.biz/qradarfirmware.

Security issues resolved in this firmware update

The table lists the software versions and CVEs addressed in the firmware release.

Component	File name	Updates
UEFI/BIOS	lnvgy_fw_uefi_ive176j-3.22_anyos_32-64.uxz	Resolved CVEs CVE-2021-0092, CVE-2021-0093, CVE-2021-0144, CVE-2021-0099, CVE-2021-0103, CVE-2021-0107, CVE-2021-0111, CVE-2021-0114, CVE-2021-0115, CVE-2021-0116, CVE-2021-0117, CVE-2021-0118, CVE-2021-0125, CVE-2021-0124, CVE-2021-0147, CVE-2021-0060, CVE-2021-0144, CVE-2021-0157, CVE-2021-0156. Enhancements Added vendor ID, manufacture location and manufacture date to the content of DIMMs serial number in SMBIOS type 17. Fixes Fixed CPU Uncorrectable recoverable error reporting. Update Intel SINIT ACM 1.7.51 Update SPS firmware version 04.01.04.601.0 Update processor microcode to MB750654_02006C0A, MBF50656_0400320A, MBF50657_0500320A
XCC	oem_fw_xcc_cdo388y-7.92_anyos_noarch.uxz	Resolved CVEs CVE-2015-3414, CVE-2015-3415, CVE-2015-3416, CVE-2016-6153, CVE-2017-3735, CVE-2017-3736, CVE-2017-3737, CVE-2017-3738, CVE-2017-5130, CVE-2017-6451, CVE-2017-6452, CVE-2017-6455, CVE-2017-6458, CVE-2017-6459, CVE-2017-6460, CVE-2017-6462, CVE-2017-6463, CVE-2017-6464, CVE-2017-7407, CVE-2017-8816, CVE-2017-8817, CVE-2017-10989, CVE-2017-12799, CVE-2017-12967, CVE-2017-13710, CVE-2017-14129, CVE-2017-14130, CVE-2017-14333, CVE-2017-14529, CVE-2017-14930, CVE-2017-14932, CVE-2017-14933, CVE-2017-14934, CVE-2017-14938, CVE-2017-14939, CVE-2017-14940, CVE-2017-14974, CVE-2017-15020, CVE-2017-15021, CVE-2017-15022, CVE-2017-15023, CVE-2017-15024, CVE-2017-15025, CVE-2017-15225, CVE-2017-15938, CVE-2017-15939, CVE-2017-15996, CVE-2017-16544, CVE-2017-16931, CVE-2017-16932, CVE-2017-17484, CVE-2017-1000100, CVE-2017-1000101, CVE-2017-1000254, CVE-2017-1000257, CVE-2017-1000494, CVE-2018-6872, CVE-2018-1000005, CVE-2018-1000007, CVE-2018-1000120, CVE-2018-1000121, CVE-2018-1000122
LXPM	lnvgy_fw_lxpm_pdl138g-2.06_anyos_noarch.uxz	None
RAID controller	lnvgy_fw_raid_mr3.5.530-51.17.0-4094-0_linux_x86-64.bin lnvgy_fw_raid_mr3.5.930-51.17.0-4094-0_linux_x86-64.bin	None
HDD	lnvgy_fw_drives_all-1.38.04-0_linux_x86-64.bin	None
PCi and LOM adapters	intc-lnvgy_fw_nic_net-8.40-5.40-1.3079.0-all-12_linux_x86-64.bin	None
Emulex	elx-lnvgy_fw_fc_lp.31-14.0.376.10-3_linux_x86-64.bin	None

Table 3: Security issues resolved in the M6 firmware update 6.0.0.

Part 2: Requirements to create a bootable USB drive

To create a bootable USB key, you must have access to the following items:

• An 8 GB or larger USB flash drive.
• Entitlement for IBM Fix Central is required download firmware for QRadar appliances.
• A workstation or laptop running one the following operating systems:
  • Windows™ 10
  • Windows™ 7
  • Windows™ Server 2008R2
  • Windows™ Server 20016
    NOTE: Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.

Creating the bootable USB drive

1. Download the M6 6.0.0 firmware IMG file from IBM Fix Central.
   Note: Administrators can select either download link as the firmware download is identical for all QRadar software versions.  
   • For QRadar 7.3.x: IBM Fix Central M6 firmware 6.0.0 IMG download
   • For QRadar 7.4.x: IBM Fix Central M6 firmware 6.0.0 IMG download
   • For QRadar 7.5.x: IBM Fix Central M6 firmware 6.0.0 IMG download
2. Download the Rufus Bootable USB Tool.
3. Insert the USB flash drive into a USB port on your Windows™ laptop or workstation.
4. Open Rufus and configure the properties.

   Parameter	Value
   Device	Select your USB drive
   Boot Selection	Select Qradar_IMG_M6_1U_SR630_7X02_2U_SR650_7X06_6_0_0.img
   Partition scheme	MBR (Default)
   Target system	BIOS (or UEFI-CSM) (Default)
   File system	FAT32 (Default)
   Cluster size	This value defaults to the best option based on size of the USB drive.

   
   For example,
   
5. Click Start. The image is loaded on the USB drive.
   
6. After the installation finishes, safely eject the USB flash drive from your computer.​
   
   Results
   The bootable drive is ready to be used to install firmware on the M6 appliance.

Part 3. Installing the Firmware on the QRadar M6 appliance

The instructions are intended for M6 appliances that are not configured as HA (high-availability) pairs. If your appliance is in a HA pair, you must use the High-Availability update instructions found here:  http://www.ibm.com/support/docview.wss?uid=swg27047121#HA .

Booting from the USB Drive

1. Insert the USB drive that has the bootable image into the QRadar appliance.
   IMPORTANT: Do not remove the USB flash drive until the IBM ToolsCenter completes the firmware installation.
2. From the terminal or the KVM switch for the appliance, log in with root user credentials.
3. From the command prompt, type: reboot
4. As the appliance reboots, press F12.
   
5. From the Boot Devices Manager, verify the Legacy Mode check box is clear (NOT selected).
   
6. Locate your USB drive in the Boot Devices Menu and press Enter.
   
7. In the Update Settings menu, verify all check boxes are clear (not selected) and click Next.
   
8. In the Update Comparison menu, click Begin.
   
9. The IBM UpdateXpress System Pack Installer compares the current package with the installed firmware.
10. Verify all check boxes are selected where new firmware versions are available and click Next.
    IMPORTANT: Administrators must review the New Version column and confirm the firmware update is selected (checked). Issues were reported where firmware changes were not installed in prior releases.
    
    
11. Wait for the firmware updates to load.
    
12. Click Begin Update to install the firmware.
    
    
    NOTE: Administrators might be prompted with a confirmation dialogue and need to click Next to continue.
    
13. Verify that all updates complete successfully and click Next.
    
14. If you experienced any errors, click Save Log or click Finish to exit after a successful installation.
    
15. The appliance must reboot to complete the firmware installation.
    
    
    Results
    The appliance reboots and is available for use in the QRadar deployment. If you experience any installation issues, you can contact QRadar Support for assistance and open a software support case for your appliance. The support representative can request the firmware logs for review to determine the root cause of the issue or if replacement hardware is required. If the issue is hardware related, the support representative can change the case type and involve the proper teams to schedule replacement parts.