SI79121 - IPL-UNPRED QNFSIPLFUL CONTROL GROUP, IF IPL IS SETUP IN CTRL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.

Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS wiki:
https://ibm.biz/ibmi-brms

Fixes in this PTF:

1. When running the QNFSIPLFUL control group, and an IPL is
specified in the control group attributes, the special save of
the virtual optical image catalog does not run.

CORRECTION FOR APAR 'SE77415' :
-------------------------------
The control group was incorrectly processing the IPL action
before the special save of the virtual optical image catalog.
The special save has been moved before the IPL action to fix
this situation.

Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.
Note:  ending the http admin servers may affect other non-BRMS
users.

From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

CIRCUMVENTION FOR APAR 'SE77415' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI76513      BRM-MAINT-INCORROUT Fixes - June 2021
   SI75082      BRM-MAINT INCORROUT Fixes - March 2021
   SI74477      BRM-MAINT INCORROUT Fixes - December 2020
   SI73676      BRM-MAINT INCORROUT Fixes - September 2020
   SI72865      BRM-MAINT INCORROUT Fixes - June 2020
   SI71973      BRM-MAINT-INCORROUT Fixes March 2020
   SI71874      BRM-MAINT INCORROUT Fixes - January 2020
   SI71132      BRM-MAINT INCORROUT Fixes - December 2019
   SI70624      BRM-MAINT INCORROUT Fixes - September 2019
   SI70366      BRM-MAINT INCORROUT Fixes - July 2019
   SI69389      BRM-MAINT-INCORROUT Fixes - June 2019
   SI68855      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68845      BRM-MAINT-INCORROUT Fixes - December 2019
   SI68567      BRM-MAINT-INCORROUT Fixes - December 2018
   SI68072      BRM-MAINT-INCORROUT Fixes - September 2018
   SI67312      BRM-MAINT-INCORROUT Fixes - June 2018
   SI66899      BRM-MAINT-INCORROUT Fixes - March 2018
   SI66285      BRM-MAINT-INCORROUT Fixes-Dec 2017
   SI65675      BRM-MAINT-INCORROUT Fixes-Sept 2017
   SI64248      BRM-MAINT-INCORROUT Fixes-June 2017
   SI64275      BRM-BACKUP-MSGBRM4106 - REQUESTED FUNCTION NOT CORRECT
   SI63721      BRM-MAINT-INCORROUT Fixes-Mar 2017
   SI63591      BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
   SI63085      BRM-MAINT-INCORROUT Fixes-Dec 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59998      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60600      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI58957      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57831      BRM-MAINT-INCORROUT Fixes-Dec 2015
   SI57980      BRM PROBLEM REMOVING SYSTEM FROM BRMS NETWORK
   SI57980      BRM-MEDIA-LOOP WHEN APPENDING SAVES TO DUPLICATE MEDIA USING
   SI57214      BRM-MAINT-INCORROUT Fixes-Sept 2015
   SI56278      BRM-MAINT-INCORROUT  Fixes
   SI55731      BRM-MAINT-INCORROUT  Fixes
   SI54787      BRM-MAINT-INCORROUT  Fixes
   SI53306      BRM-MAINT-INCORROUT  Fixes
   SI52668      BRM-MAINT-INCORROUT  Fixes
   SI51641      BRM-MAINT-INCORROUT  Fixes
   SI50936      BRM-MAINT-INCORROUT  Fixes

Summary Information
System..............................  i
Models..............................  
Release.............................  V7R2M0
Licensed Program....................  5770BR1
APAR Fixed..........................  View details for APAR SE77415
Superseded by:......................  
Recompile...........................  N
Library.............................  QBRM
MRI Feature ........................  NONE
Cum Level...........................  NONE

IBM i Support