PTF Cover Letter
PTF ( Program Temporary Fixes ) Cover letter
MFT400 CUMULATIVE #90011 FIX PACK (MFT v9.0.0 TOOLS)
Pre/Co-Requisite PTF / Fix List
REQ LICENSED PTF/FIX LEVEL
TYPE PROGRAM RELEASE NUMBER MIN/MAX OPTION
---- -------- --------- ------- ------- ------
NONE
NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels. This PTF may be a prerequisite
for future PTFs. By applying this PTF you authorize and agree to the
foregoing.
This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF. You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.
SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.
The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.
APAR Error Description / Circumvention
-------------------------------------------------
Collective service MDV 9.0.0.11 for IBM MFT v9.0
Details of problems fixed for MFT are included in
APAR SE74834 for 5724H72 (option *BASE)
CORRECTION FOR APAR 'SE74848' :
-------------------------------
Collective service MDV 9.0.0.11 for IBM MFT v9.0 .
which comprises ... PTF SI75074 for APAR SE74847 <- MFT *BASE.
SI75075 for APAR SE74848 <- MFT Tools.
SI75076 for APAR SE74849 <- MFT Agent.
SI75077 for APAR SE74850 <- MFT Service
CIRCUMVENTION FOR APAR 'SE74848' :
----------------------------------
None.
Activation Instructions
None.
Special Instructions
Whether or not you have experienced this problem, it is recommended
that you apply this PTF, following the instructions given below.
This PTF, for IBM MQ Managed File Transfer (5725M50) Version 9 Release
0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************
Whether or not you have experienced this problem, it is recommended
that you apply this PTF, following the instructions given below.
This PTF, for IBM MQ Managed File Transfer (5725M50) Version 9 Release
0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
Whether or not you have experienced this problem, it is recommended
that you apply this PTF, following the instructions given below.
This PTF, for IBM MQ Managed File Transfer (5725M50) Version 9 Release
0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
Whether or not you have experienced this problem, it is recommended
that you apply this PTF, following the instructions given below.
This PTF, for IBM MQ Managed File Transfer (5725M50) Version 9 Release
0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
***********************************************************************
*
Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.
This PTF, for MFT for IBM i (5725M500) Version 9 Release 0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.
This PTF, for MFT for IBM i (5725M500) Version 9 Release 0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.
This PTF, for MFT for IBM i (5725M500) Version 9 Release 0,
Modification 0 is of type *IMMED.
***********************************************************************
*
*** IMPORTANT
***
*** ---------
***
*** Before applying this PTF, you MUST stop ALL MFT Agents and end
***
*** the QMFT subsystem. MFT Agents can be stopped using the
***
*** fteStopAgent command. For more info on this command visit the
***
*** MFT Knowledge Center :
***
*** https://www.ibm.com/support/knowledgecenter/en/SSFKSJ_9.0.0/com
***
*** .ibm.wmqfte.doc/wmqfte_intro.htm
***
***********************************************************************
*
Default Instructions
THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.
Supersedes
PTF/FIX NO(S). APAR TITLE LINE
-------------- ------------------------------------------------------------
SI73167 MFT400 CUMULATIVE #90010 FIX PACK (MFT v9.0.0 TOOLS)
SI72180 MFT400 CUMULATIVE #90009 FIX PACK (MFT v9.0.0 TOOLS)
SI71351 MFT400 CUMULATIVE #90008 FIX PACK (MFT v9.0.0 TOOLS)
SI70271 MFT400 CUMULATIVE #90007 FIX PACK (MFT v9.0.0 TOOLS)
SI69030 MFT400 CUMULATIVE #90006 FIX PACK (MFT v9.0.0 TOOLS)
SI68059 MFT400 CUMULATIVE #90005 FIX PACK (MFT v9.0.0 TOOLS)
SI67570 MFT400 CUMULATIVE #90004 FIX PACK (MFT v9.0.0 TOOLS)
SI66845 MFT400 CUMULATIVE #90003 FIX PACK (MFT v9.0.0 TOOLS)
SI65599 MFT400 CUMULATIVE #90001 FIX PACK (MFT v9.0.0 TOOLS)
SI62092 MFT400 CUMULATIVE #90001 FIX PACK (MFT v9.0.0 TOOLS)
Summary Information
System.............................. | i |
Models.............................. | |
Release............................. | V9R0M0 |
Licensed Program.................... | 5725M50 |
APAR Fixed.......................... | View details for APAR SE74848 |
Superseded by:...................... | View fix details for PTF SI79486 |
Recompile........................... | N |
Library............................. | QMQMMFT |
MRI Feature ........................ | NONE |
Cum Level........................... |
IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.
Was this topic helpful?
Document Information
Modified date:
27 April 2022