IBM Support

SI74569 - MQM400 CUMULATIVE #91007 FIX PACK (MQ V9.1.0 QUEUE MANAGER L

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

MQM400 CUMULATIVE #91007 FIX PACK (MQ V9.1.0 QUEUE MANAGER L


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5724H72  V9R1M0    SI74573   NONE     0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Collective service MDV 9.1.0.7 for IBM MQ v9.1

For details of problems fixed, refer to the APARs listed below:-

SE74558 - 5724H72 (option *BASE) ship library QMQM     and IFS .
SE74563 - 5724H72 (option 1)     ship library QMQMSAMP and IFS .
SE74569 - 5724L26 (option *BASE) ship library QMQMJAVA and IFS .
SE74570 - 5724L26 (option 1)     ship library QMQMJAVA and IFS .

CORRECTION FOR APAR SE74561 :
-----------------------------
Collective service MDV 9.1.0.7 for IBM MQ v9.1          .
which comprises ... PTF SI74566 for APAR SE74558 <- Marker PTF.
SI74567 for APAR SE74559              .
SI74568 for APAR SE74560              .
SI74569 for APAR SE74561              .
SI74570 for APAR SE74562              .
SI74571 for APAR SE74563 <- Samples   .
SI74572 for APAR SE74564              .
SI74573 for APAR SE74565              .
SI74574 for APAR SE74566              .
SI74575 for APAR SE74567              .
SI74576 for APAR SE74568 <- Language  .
SI74577 for APAR SE74569 <- Web       .
SI74578 for APAR SE74570 <- Java/JMS  .
SI74579 for APAR SE74571 <- Java Samples

CIRCUMVENTION FOR APAR SE74561 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.

This PTF, for IBM MQ for IBM i (5724H72) Version 9 Release 1,
Modification 0 is of type *IMMED.

***********************************************************************
*
***                           IMPORTANT
***
***                           ---------
***
***  Before applying this PTF, you MUST stop ALL Queue Manager
***
***  activity and FULLY quiesce IBM MQ, by following the steps
***
***  shown below. Please note, if you do not clear up shared memory
***
***  (see step (9)) then your Queue Manager may not restart.
***
***********************************************************************
*

1. Use F12 (Cancel) to return to your initial MENU.

Note: If you have IBM MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.

2. Warn all users that you are going to shut down IBM MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.

3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)

NB: Using RCDMQMIMG(*YES) may cause the shutdown of some queue managers
to take a very long time. If this is the case then do step 3a.

3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)

4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shutdown of IBM MQ by using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)

5. Shut down the default IBM MQ subsystem (QMQM) and also any
user-defined IBM MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)

6. Sign off, then sign on again.

7. Load and apply this PTF - using the IBM i menu of PTF commands.

8. Load and apply all other IBM MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at https://www-01.ibm.com/support/docview.wss?uid=swg27006037

9. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear IBM MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)

10. Restart the IBM MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)

11. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.

All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI73720 :
=================================================

Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.

This PTF, for IBM MQ for IBM i (5724H72) Version 9 Release 1,
Modification 0 is of type *IMMED.

***********************************************************************
*
***                           IMPORTANT
***
***                           ---------
***
***  Before applying this PTF, you MUST stop ALL Queue Manager
***
***  activity and FULLY quiesce IBM MQ, by following the steps
***
***  shown below. Please note, if you do not clear up shared memory
***
***  (see step (9)) then your Queue Manager may not restart.
***
***********************************************************************
*

1. Use F12 (Cancel) to return to your initial MENU.

Note: If you have IBM MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.

2. Warn all users that you are going to shut down IBM MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.

3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)

NB: Using RCDMQMIMG(*YES) may cause the shutdown of some queue managers
to take a very long time. If this is the case then do step 3a.

3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)

4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shutdown of IBM MQ by using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)

5. Shut down the default IBM MQ subsystem (QMQM) and also any
user-defined IBM MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)

6. Sign off, then sign on again.

7. Load and apply this PTF - using the IBM i menu of PTF commands.

8. Load and apply all other IBM MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at https://www-01.ibm.com/support/docview.wss?uid=swg27006037

9. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear IBM MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)

10. Restart the IBM MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)

11. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.

All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.


Whether or not you have experienced this problem, it is recommended
that
you apply this PTF, following the instructions given below.

This PTF, for WebSphere MQ for iSeries (5724H7254) Version 9 Release 1,
Modification 0 is of type *IMMED.

***********************************************************************
*
***                           IMPORTANT
***
***                           ---------
***
***  Before applying this PTF, you MUST stop ALL Queue Manager
***
***  activity and FULLY quiesce WebSphere MQ, by following the steps
***
***  shown below. Please note, if you do not clear up shared memory
***
***  (see step (10)) then your Queue Manager may not restart.
***
***********************************************************************
*

1. Use F12 (Cancel) to return to your initial MENU.

Note: If you have WebSphere MQ Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off
and sign on again.

2. Warn all users that you are going to shut down WebSphere MQ,
and that they should not restart their Queue Managers or their MQI
applications until all PTFs have been loaded and applied.

3. Quiesce all queue managers in a controlled manner:
... ENDMQM MQMNAME(*ALL) OPTION(*CNTRLD) ENDCCTJOB(*YES)
... RCDMQMIMG(*YES) TIMEOUT(15)

NB: Using RCDMQMIMG(*YES) may cause the shut down of some queue
managers
to take a very long time. If this is the case then do step 3a.

3a. From a different sign-on session, issue command:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*CNTRLD)
ENDCCTJOB(*NO)
followed by:
.. ENDMQM MQMNAME(queue-manager-name) OPTION(*IMMED)
ENDCCTJOB(*YES)

4. If step 3 does NOT log AMQ7A60 ("All queue managers have been
quiesced") then repeat the shut down WebSphere MQ using command:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(15)

5. Shut down the default WebSphere MQ subsystem (QMQM) and also any
user-defined WebSphere MQ subsystems:
... ENDSBS SBS(QMQM) OPTION(*IMMED)

6. Sign off, then sign on again.

7. If you have any testfix PTFs which have been applied on top of your
current Fix Pack (CSD) PTFs, then use RMVPTF to remove these
testfixes.

8. Load and apply this PTF - using the OS/400 menu of PTF commands.

9. Load and apply all other WebSphere MQ PTFs which are requisites for
this PTF. A full list of the PTFs which comprise a Fix Pack can be
seen at http:
//www-306.ibm.com/software/integration/mqfamily/support/summary/

10. If steps 3 or 4 did NOT log AMQ7A60 ("All queue managers have been
quiesced"), you MUST clear WebSphere MQ shared memory by repeating:
... ENDMQM MQMNAME(*ALL) OPTION(*IMMED) ENDCCTJOB(*YES)
... RCDMQMIMG(*NO) TIMEOUT(05)

11. Restart the WebSphere MQ subsystem:
... STRSBS SBSD(QMQM/QMQM)

12. Restart one or more Queue Managers, using either the STRMQM command
or option 14 from the WRKMQM panel.

All users who were actively using WebSphere MQ before it was quiesced
should sign off and sign on again before restarting their Queue
Managers or restarting their MQI applications.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI73720      MQM400 CUMULATIVE #91006 FIX PACK (MQ V9.1.0 QUEUE MANAGER L
   SI72681      MQM400 CUMULATIVE #91005 FIX PACK (MQ V9.1.0 QUEUE MANAGER L
   SI71645      MQM400 CUMULATIVE #91004 FIX PACK (MQ V9.1.0 QUEUE MANAGER L
   SI70607      MQM400 CUMULATIVE #91003 FIX PACK (MQ V9.1.0 QUEUE MANAGER L
   SI68898      MQM400 CUMULATIVE #91002 FIX PACK (MQ V9.1.0 QUEUE MANAGER L
   SI68378      MQM400 CUMULATIVE #91001 FIX PACK (MQ V9.1.0 QUEUE MANAGER L

Summary Information

System..............................i
Models..............................
Release.............................V9R1M0
Licensed Program...............5724H72
APAR Fixed..........................View details for APAR SE74561
Superseded by:......................
Recompile...........................N
Library.............................QMQM
MRI Feature ........................NONE
Cum Level...........................


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"9.1","Product":{"code":"SG15V","label":"PTF Cover Letters - IBM i General"},"Component":"5724H72","Edition":""}]

Document Information

Modified date:
08 December 2020