IBM Support

SI49530 - OSP-OTHER-MSGCPDBB11 Admin domain fails to start MSGCPDBB11

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP-OTHER-MSGCPDBB11 Admin domain fails to start MSGCPDBB11


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
PRE  5770999  710  MF99006   00/00    0000
PRE  5770999  710  MF52057   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
MSGMCH0601 logged during a sync of monitored resource type user
profile causing the index value for PASSWORD to be missing. This
is causing admin domain fails to start MSGCPFBB11 RC1.

CORRECTION FOR APAR SE54991 :
-----------------------------
Errors during a sync of a monitored resource will no longer
cause the index value for PASSWORD to be missing.

CIRCUMVENTION FOR APAR SE54991 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you should end the CRG jobs associated
with the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.

Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.

The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change
Cluster Recovery CL command.

To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)

where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.

You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.

After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)

where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.

After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster.  You can restart the QPRFSYNCH job
with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI49425 :
=================================================

The PTF must be applied on all nodes in the cluster. However, it is not
necessary to update all cluster nodes at the same time. On each node in
the cluster: end clustering, apply the PTF, then start clustering.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI43999 :
=================================================

You must follow the Special Instructions for the superseded PTF
SI36958.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48950 :
=================================================

On each node in the cluster, end clustering, apply the fix, and then
start clustering. It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI47176 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on all nodes (on the same release as this PTF) in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system and look for two
system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,
Cluster Resource Services must be ended on this system and you must
sign off all sessions where Cluster Resource Services APIs were used
before the PTF can be applied.  Cluster Resource Services is started
through the Start Cluster Node API.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI40059 :
=================================================

End clustering on a node, apply the fix, then re-start clustering on
the node.  When the fix has been applied to all nodes in the cluster,
the fix will be active for the cluster.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI39933 :
=================================================

On each node in the cluster, apply the fix and start clustering.  It is
not necessary to update all nodes at the same time, however, any node
without the fix will continue to be a potential source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42297 :
=================================================

End clustering on a node, apply the fix, then re-start clustering on
the node.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42199 :
=================================================

In order to fix the problems described by this PTF on all nodes in the
cluster, the PTF must be applied on all nodes in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system and look for two
system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,
Cluster Resource Services must be ended on this system and you must
sign off all sessions where Cluster Resource Services APIs were used
before the PTF can be applied.  Cluster Resource Services is started
through the Start Cluster Node API.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI49425      OSP-INCORROUT: Cluster Resource Group object is locked when
   SI49260      OSP-NF: Allow add / remove MREs when not all Admin Domain no
   SI48938      OSP-OTHER-INCORROUT ADMIN DOMAIN MRE HAS INCORRECT STATUS
   SI48301      OSP-OTHER-INCORROUT NO ERROR MSG IN ADMIN DOMAIN JOB LOG
   SI46616      OSP-OTHER-INCORROUT ADMIN DOMAIN MRE HAS INCORRECT STATUS
   SI45092      OSP-OTHER-MSGMCH0601 MSGMCH0601 IN ADMIN DOMAIN JOBLOG WHEN
   SI43999      OSP-OTHER-F/IXMACHINEINDEXEXTEND-T/QMRSP1-MSGMCH2804 MSGMCH2
   SI43999      OSP-INCORROUT MSGCPD1421 ADMINISTRATIVE DOMAIN CANNOT SYNCH
   SI38884      MSGMCH3601 for PRTCADMRE using *usrprf for RSCTYPE(*USRPRF)
   SI43692      OSP-OTHER-MSGCPF2499 INTERNAL ERROR CODE PARAMETER NOT SET I
   SI43470      OSP-OTHER-LOOP ADMINISTRATIVE DOMAIN JOB LOOPS DUE TO HAVING
   SI43227      OSP Cluster Admin Domain Changes.
   SI39263      OSP Cluster Admin Domain Changes.
   SI36958      OSP-INCORROUT MSGMCH0601 from ADDCADMRE
   SI48950      OSP-OTHER-UNPRED ENHANCEMENT TO CLUSTER MESSAGE HANDLING.
   SI48302      OSP-MSGMCH6801 Admin Domain job log contains C2M1212 msg
   SI47176      OSP-OTHER-RC23-MSGCPFBB80 STRCRG MSGCPFBB80 RC23
   SI46608      HASM-UNPRED AUTHORITY FAILURE (AF) FOR CLUSTER INFORMATION O
   SI45802      MSGCPF9898 CHGCRG may fail when using CHGCRG and SVC
   SI45802      OSP-MSGCPFBB80 Message sometimes incorrectly sent with CHGCR
   SI45802      HASM-UNPRED Allow sharing of cluster resource group dataport
   SI45802      OSP-INCORROUT XSM health check fails and causes failover due
   SI45488      OSP-MSGCPFBB46 Start cluster node operation fails with MSGCP
   SI45083      OSP-MSGCPFBB26 Sent after changing cluster version
   SI43997      OSP-INCORROUT CHGCRG can not switch both site primaries in a
   SI43997      OSP-MSGCPFBB26-PAR-940XBASE MSGCPFBB26 CLUSTER RESOURCE SERV
   SI43997      MSGCPFBB17 CHGCRG can not switch to backup because cluster i
   SI43997      INCORROUT Cluster not handling LPAR partition migration corr
   SI43997      MSGMCH3802 issued during start admin domain
   SI40059      OSP-OTHER-RC2-MSGCPFBB98
   SI39933      OSP-OTHER-INCORROUT CLUSTER HANG CONDITION PREVENTING INACTI
   SI39451      OSP-INCORROUT Add disk unit to ASP fails
   SI42297      OSP-OTHER New Function Cluster N-3 Version Support
   SI41516      OSP-INCORROUT Cluster trace information wraps quickly
   SI40857      OSP-MSGCPFBB05 Start cluster node process fails with CPFBB05
   SI40857      OSP-INCORROUT DMPCLUTRC does not print the cluster group nam
   SI37375      OSP-MSGCPFBBD3 ADDCRGNODE fails when adding a switchable LUN
   SI37375      OSP-MSGCPFBBD6 Error when adding a mirror site to a LUN swit
   SI36799      OSP-OTHER-LOOP Global Mirror CRG hang after system 7.1 upgra
   SI36436      OSP-OTHER-INCORROUT  Fixes for Cluster Resource Services
   SI42199      OSP Don't allow logical partition suspension when clustering
   SI39194      OSP-OTHER-INCORROUT the id of the sending cluster node needs

Summary Information

System..............................i
Models..............................
Release.............................V7R1M0
Licensed Program...............5770SS1
APAR Fixed..........................View details for APAR SE54991
Superseded by:......................View fix details for PTF SI66971
Recompile...........................N
Library.............................QSYS
MRI Feature ........................NONE
Cum Level...........................C3298710


System i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG16D","label":"PTF Cover Letters - IBM i 7.1 environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
28 March 2013