IBM Support

SI48302 - OSP-MSGMCH6801 Admin Domain job log contains C2M1212 msg

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP-MSGMCH6801 Admin Domain job log contains C2M1212 msg


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
PRE  5770999  710  MF52057   00/00    0000
PRE  5770999  710  MF53656   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Messages MCH6801 and C2M1212 show up in the Cluster
Administrative Domain job log due to a program defect.

CORRECTION FOR APAR SE53613 :
-----------------------------
The program defect has been corrected.

CIRCUMVENTION FOR APAR SE53613 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI47176 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on all nodes (on the same release as this PTF) in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system and look for two
system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,
Cluster Resource Services must be ended on this system and you must
sign off all sessions where Cluster Resource Services APIs were used
before the PTF can be applied.  Cluster Resource Services is started
through the Start Cluster Node API.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI40059 :
=================================================

End clustering on a node, apply the fix, then re-start clustering on
the node.  When the fix has been applied to all nodes in the cluster,
the fix will be active for the cluster.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI39933 :
=================================================

On each node in the cluster, apply the fix and start clustering.  It is
not necessary to update all nodes at the same time, however, any node
without the fix will continue to be a potential source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42297 :
=================================================

End clustering on a node, apply the fix, then re-start clustering on
the node.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42199 :
=================================================

In order to fix the problems described by this PTF on all nodes in the
cluster, the PTF must be applied on all nodes in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.

To determine if Cluster Resource Services is active on your system, do
a WRKACTJOB from the command line of your system and look for two
system jobs (QCSTCTL and QCSTCRGM).  If either of these jobs exist,
Cluster Resource Services must be ended on this system and you must
sign off all sessions where Cluster Resource Services APIs were used
before the PTF can be applied.  Cluster Resource Services is started
through the Start Cluster Node API.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI47176      OSP-OTHER-RC23-MSGCPFBB80 STRCRG MSGCPFBB80 RC23
   SI46608      HASM-UNPRED AUTHORITY FAILURE (AF) FOR CLUSTER INFORMATION O
   SI45802      MSGCPF9898 CHGCRG may fail when using CHGCRG and SVC
   SI45802      OSP-MSGCPFBB80 Message sometimes incorrectly sent with CHGCR
   SI45802      HASM-UNPRED Allow sharing of cluster resource group dataport
   SI45802      OSP-INCORROUT XSM health check fails and causes failover due
   SI45488      OSP-MSGCPFBB46 Start cluster node operation fails with MSGCP
   SI45083      OSP-MSGCPFBB26 Sent after changing cluster version
   SI43997      OSP-INCORROUT CHGCRG can not switch both site primaries in a
   SI43997      OSP-MSGCPFBB26-PAR-940XBASE MSGCPFBB26 CLUSTER RESOURCE SERV
   SI43997      MSGCPFBB17 CHGCRG can not switch to backup because cluster i
   SI43997      INCORROUT Cluster not handling LPAR partition migration corr
   SI43997      MSGMCH3802 issued during start admin domain
   SI40059      OSP-OTHER-RC2-MSGCPFBB98
   SI39933      OSP-OTHER-INCORROUT CLUSTER HANG CONDITION PREVENTING INACTI
   SI39451      OSP-INCORROUT Add disk unit to ASP fails
   SI42297      OSP-OTHER New Function Cluster N-3 Version Support
   SI41516      OSP-INCORROUT Cluster trace information wraps quickly
   SI40857      OSP-MSGCPFBB05 Start cluster node process fails with CPFBB05
   SI40857      OSP-INCORROUT DMPCLUTRC does not print the cluster group nam
   SI37375      OSP-MSGCPFBBD3 ADDCRGNODE fails when adding a switchable LUN
   SI37375      OSP-MSGCPFBBD6 Error when adding a mirror site to a LUN swit
   SI36799      OSP-OTHER-LOOP Global Mirror CRG hang after system 7.1 upgra
   SI36436      OSP-OTHER-INCORROUT  Fixes for Cluster Resource Services
   SI42199      OSP Don't allow logical partition suspension when clustering
   SI39194      OSP-OTHER-INCORROUT the id of the sending cluster node needs

Summary Information

System..............................i
Models..............................
Release.............................V7R1M0
Licensed Program...............5770SS1
APAR Fixed..........................View details for APAR SE53613
Superseded by:......................View fix details for PTF SI66971
Recompile...........................N
Library.............................QSYS
MRI Feature ........................NONE
Cum Level...........................C3298710


System i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG16D","label":"PTF Cover Letters - IBM i 7.1 environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
10 January 2013