Product Documentation
Abstract
Features and technical details of the Netfinity 10/100 Ethernet Adapter 2
Content
 | Files and drivers |
| Publications |
At a glance Keep your high-traffic server up and running on the network and readily adjustable to changing traffic levels with IBM's new Netfinity 10/100 Ethernet Adapter 2. It features:
- Adapter fault tolerance utilizing redundant links to avoid network failure
- High throughput and low CPU utilization
- Wake on LAN and remote boot support
- Hot plugability for online server maintenance
- Adapter load balancing for scalable bandwidth up to 800 Mbps
- Auto-negotiation to set speed and duplex mode
- Easy installation with Plug and Play
- 100BASE-TX and 10BASE-T LAN attachment for PC servers with a PCI bus interface
Lifetime limited
This product replaces
Netfinity 10/100 Ethernet Adapter - 34L0901
Packaging
You will receive one box containing the following items:
- Adapter
- Installation and User's Guide and device drivers on CD-ROM
- Wake on LAN cable
Part numbers applicable to: World Wide
- Marketing part number: 34L1501
- FRU part number: 34L1509
Part number(s) for ordering multiple quantities
- Card Pack: 34L1510
- Card packs are orderable as single units. They are shipped in an overpack box with up to 10 per box. It is preferred that order quantities be in multiples of 10.
Product Dates
Effective warranty date: 03/05/2001
Technical Specifications
Physical, Environmental, and Compatibility Specifications as known at time of announcement
Weight
- 0.15 lbs
- 0.07 kg
- 3.4 inches
- 87 mm
- 4.7 inches
- 120 mm
- 0.8 inches
- 20 mm
- Between 0 degrees Celsius and 55 degrees Celsius
- Operating: between 8% and 80%
This Netfinity adapter supports network and power management standards. It complies with the Wired for Management (WfM) baseline v1.1 specification for remote server management and ACPI power management. It is managed by simple network management protocol (SNMP) and provides DMI 2.0 instrumentation. It also meets FCC Class B, CISPR B, CE Mark, and UL requirements for electrical emissions and safety.
Hardware Requirements
IBM Netfinity 10/100 Ethernet Adapter 2. For 100BASE-TX operation, a UTP-5 cable with an RJ-45 connector is required. For 10BASE-T operation, a UTP-3, -4, or -5 cable with an RJ-45 connector is required.
Software Requirements
There is no mandatory software; however, a server operating system that supports networking is required. Device drivers for all leading server operating systems are provided.
Limitations
Some configurations may not be supported.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00GTZ","label":"System x Hardware Options->Ethernet->10\/100 Mbps->34L1501"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-4GRUDT