Troubleshooting
Problem
BladeCenter HS22 and HS22V will not boot from volumes larger than 2 TB that are connected to the on-board Serial Attached SCSI (SAS) controller. The operating system on the blade does not recognize the boot Logical Unit Number (LUN). This tip applies only to SAS or Serial Advanced Technology Attachment (SATA) hard drives that are connected via the on-board LSI SAS circuitry. It does not apply to any Fibre or Ethernet storage arrays.
Resolving The Problem
Source
RETAIN tip: H204000
Symptom
BladeCenter HS22 and HS22V will not boot from volumes larger than 2 TB that are connected to the on-board Serial Attached SCSI (SAS) controller. The operating system on the blade does not recognize the boot Logical Unit Number (LUN).
This tip applies only to SAS or Serial Advanced Technology Attachment (SATA) hard drives that are connected via the on-board LSI SAS circuitry. It does not apply to any Fibre or Ethernet storage arrays.
Affected configurations
The system may be any of the following IBM servers:
- BladeCenter HS22, type 1936, any model
- BladeCenter HS22, type 7870, any model
- BladeCenter HS22V, type 1949, any model
- BladeCenter HS22V, type 7871, any model
The system is configured with one or more of the following IBM Options:
- LSI 1064e Integrated Controller
This tip is not software specific.
The following system firmware level(s) are affected:
- V 2.73
Solution
Update the on-board SAS controller to version 2.74 or later.
The file is available by selecting the appropriate machine type on the 'Product View' of IBM Support's Fix Central web page, at the following URL:
Document Location
Worldwide
Was this topic helpful?
Document Information
Modified date:
19 April 2023
UID
ibm1MIGR-5088865