Troubleshooting
Problem
The LSI RAID information may be incorrectly displayed in the initial release of Dynamic System Analysis (DSA) reboot on servers with multiple RAID configurations or all drives are not part of a RAID configuration. For each RAID, all drives will be a partof the Logical Drive. A RAID type will show the first type detected for all Logical Drives. If RAID0 was detected, all RAIDs will show RAID0.
Resolving The Problem
Source
RETAIN tip: H193526
Symptom
The LSI RAID information may be incorrectly displayed in the initial release of Dynamic System Analysis (DSA) reboot on servers with multiple RAID configurations are present or all drives are not part of a RAID configuration.
For each RAID, all drives will be a part of the Logical Drive.
A RAID type will show the first type detected for all Logical Drives. If RAID-0 was detected, all RAIDs will show RAID-0.
Affected configurations
The system may be any of the following IBM servers:
- System x3200 M2, type 4367, any model
- System x3200 M2, type 4368, any model
- System x3250 M2, type 4190, any model
- System x3250 M2, type 4191, any model
- System x3250 M2, type 4194, any model
- System x3350, type 4192, any model
- System x3350, type 4193, any model
The system is configured with one or more of the following IBM Options:
- IBM SAS HBA Controller, Option part number 25R8060
- LSI Logic MegaRAID 8480 SAS Controller, Option part number 39R8850
- Ultra320 SCSI Controller 2, Option part number 13N2249
- Ultra320 SCSI Controller 2, Option part number 39R8743
- Ultra320 SCSI Controller, Option part number 71P8594
- Ultra320 SCSI PCIe Controller, Option part number 43W4324
The system is configured with at least one of the following:
- IBM Dynamic System Analysis (DSA) Preboot 1.00, Embedded
Note: This does not imply that the network operating system will work under all combinations of hardware and software.
Please see the compatibility page for more information:
Solution
This behavior will be corrected in a future release.
The target date for this release is scheduled for Second Quarter 2008.
The file will be available from the IBM System x Support web site at the following URL:
Document Location
Worldwide
Was this topic helpful?
Document Information
Modified date:
29 January 2019
UID
ibm1MIGR-5076390