Troubleshooting
Problem
From the command line interface of the Advanced Management Module (AMM), the "list -l all" command lists the number of CPUs for each blade. In some two-way JS21 blades, it reports just one CPU, instead of two. Example: system:blade[5]> list -l all blade[5] pele05-Security sp exp[1] cpu[1]
Resolving The Problem
| Source |
|---|
RETAIN tip: H134786
| Issue |
|---|
From the command line interface of the Advanced Management Module (AMM), the "list -l all" command lists the number of CPUs for each blade. In some two-way JS21 blades, it reports just one CPU, instead of two.
Example:
system:blade[5]> list -l all
blade[5] pele05-Security
sp
exp[1]
cpu[1]
| Affected configurations |
|---|
The system may be any of the following IBM servers:
- BladeCenter Chassis, type 7967, any model
- BladeCenter Chassis, type 8677, any model
- BladeCenter H, type 7989, any model
- BladeCenter H, type 8852, any model
- BladeCenter JS21, type 7988, any model
- BladeCenter JS21, type 8844, any model
The system is configured with 2 CPU's.
The system is configured with one or more of the following IBM Options:
- BladeCenter Advanced Management Module, Option 25R5778
This tip is not Operating System specific.
| Additional information |
|---|
The Web interface of the AMM gives information about the cores, temperature, and voltages used.
Navigate to System Status -> Blades.
Click on the Status icon (green circle) on the blade to see its CPU information.
Document Location
Worldwide
Was this topic helpful?
Document Information
Modified date:
29 January 2019
UID
ibm1MIGR-5073224