Installing SUSE Linux Enterprise Server 9 SP 4 - IBM System x3200 M2 (Type 4367, 4368)

Steps

Installation Instructions for SUSE Linux Enterprise Server 9 SP 4 for IBM System x3200 M2 Type 4367 and Type 4368

1.0 What you will need

2.0 Where to download device drivers and files

3.0 Preparing the hardware

4.0 Detailed installation instructions

• 4.1 Installing SUSE Linux Enterprise Server 9 SP 4
• 4.2 Installing security and package updates
  • 4.2.1 Local media update
  • 4.2.2 Network Update

5.0 Notices

Revision Level: 1.0.0

Updated: 16 November 2007

© Copyright International Business Machines Corporation 2007. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general information in 5.0 Notices in this document.

Supported Server: IBM® System x3200 M2 Type 4367 and Type 4368

Follow the instructions in this document in sequential order unless these instructions advise you otherwise. Windows and messages might differ from those in this document. Throughout this document, the term select is used to denote the use of arrow keys, the Tab key, Alt + a letter combination, or the mouse to make a selection.

References to optional hardware in this document do not imply support of that hardware. For information about supported options, see the ServerProven® information for your server at http://www-03.ibm.com/servers/eserver/serverproven/compat/us/.

You must have the following software and hardware for the installation:

• A registered copy of SUSE Linux® Enterprise Server 9.
• Supported hard disk drives. Go to http://www-03.ibm.com/servers/eserver/serverproven/compat/us/ for the ServerProven list of supported options and part numbers for the server.
• One blank diskette to create a BIOS code update diskette. You might need additional blank diskettes for firmware updates.

You can download device drivers and files from the following sites:

• SUSE Linux Web site http://www.novell.com/linux/
• IBM U.S. Support Web site: http://www.ibm.com/systems/support
• IBM device driver download site: MIGR-4JTS2T
• For countries outside the U.S., start at http://www.ibm.com/

You can download product specifications from the following sites:

• For IBM System x product specifications, go to http://www.redbooks.ibm.com/Redbooks.nsf/pages/xref?Open

To prepare the hardware, update system firmware, and configure arrays, refer to the Installation Guide located at the IBM Support Web site at http://www.ibm.com/systems/support

To install SUSE Linux Enterprise Server 9 SP 4, complete the steps in the following sections.

To install SUSE Linux Enterprise Server 9 SP 4, complete the following steps:

1. Insert the SUSE Linux Enterprise Server 9 SP 4 CD/DVD 1 into the CD/DVD drive and boot the system.
2. Select Installation, and then press Enter to load the kernel.
3. Follow the detailed instructions in the SUSE Linux Enterprise Server 9 Documentation Guide located at http://www.novell.com/documentation/sles9/ to install SUSE Linux Enterprise Server 9.
4. If you are prompted to reboot, make sure that there is no bootable installation media accessible to the server, and then select OK.

Notes:

• When using power management, the video output may not return correctly from some power saving states. To correct this, type xset -dpms to disable DPMS.
• If the system contains a Remote Supervisor Adapter II, review the technical information for Linux at MIGR-53793.
• Before installing any device drivers on the server, read Retain Tip H18618, at http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-53357.html.
• For advanced installation topics, such as information about how to configure a network installation server or how to configure an unattended installation, see the documentation that comes with the operating system or see the SUSE Linux online documentation.

To install security and package updates, choose one of the following methods:

• For a local media update, go to 4.2.1 Local media update.
• For a network update, go to 4.2.2 Network Update.

After the installation, complete the following steps to upgrade the server to the latest service pack:

1. Insert CD 1 of the service pack into the CD drive.
2. Start YaST from the system menu or by typing yast in a terminal window or console.
3. Type the root password when prompted.
4. Select Patch CD Update.
5. Select Next to continue.
6. Enter the package manager, where most important patches are automatically selected for update. Make sure that the patches are selected correctly, and then select Accept to install the latest updates.
7. After all updates are installed, select Finish.

After the installation is complete and networking is set up, complete the following steps to install security and package updates. Run this update regularly or set up automatic updates to make sure that all software has the latest available security updates.

1. Start YaST from the system menu or by typing yast in a terminal window or console.
2. Type the root password when prompted.
3. Select Online Update.
4. Change any server settings needed for the environment, and then select Next to continue.
5. If the Authorization prompt is displayed, type your user name and password for the SUSE Linux Maintenance program and select Login.
6. Enter the package manager, where most important patches are automatically selected for update. Make sure that the patches are selected correctly, and then select Accept to install the latest updates.
7. After all updates are installed, select Finish.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

IBM, xSeries, System x, e-business logo, ServerProven, and ServeRAID are trademarks of the International Business Machines Corporation in the United States, other countries, or both.

Linux is a trademark of Linus Torvalds in the United States, other countries, or both.

Red Hat, the Red Hat "Shadow Man" logo, and all Red Hat-based trademarks and logos are trademarks or registered trademarks of Red Hat, Inc., in the United States and other countries.

Adaptec and HostRAID are trademarks of Adaptec Inc., in the United States, other countries, or both

Other company, product, or service names may be trademarks or service marks of others.