UEFI Flash Update v1.32 - IBM BladeCenter HS23 (7875, 1929)

Download Description

• New IBM xSeries firmware and device driver file naming convention

Change history

Version 1.30 - BuildID: TKE124M

Problem(s) Fixed:

• Correct the method of forcing unoptimized boot on a BOFM change Intermittent BOFM Cfg error
  
• iSCSI setup/configuration problems
  
• iSCSI Out of Band Configuration Fails
  
• SMBIOS type17 support 2133 data rate for dimm maximum speed System powering off when Memory Speed is set to Balanced Address Parity error does not cause a memory error log entry FoD Transition Table update
  
• Systems can get in F1 uEFI without asking password uEFI Setup screen updates for grammer clearity
  
• System does not shut down from Uncorrectable Fatal and Non-Fatal PCIE Errors
  
• Enhancements:
  
• When UEFI can't communicate with IMM, UEFI splash screen shows Warning message Add support for automatic ROM recovery
  
• Add support for dynamic debug capability
  
• Improve Update Security
  
• Improve Configuration Support
  
• Add common support for OPerating system-4690
  

Limitations:

Dependencies:

• The IMM firmware must be at BUILDID: 1AOO34Z Version: 1.85 (ibm_fw_imm2_1aoo34z-1.85_anyos_noarch) or higher prior to installing UEFI version 1.30.
  
• If the IMM level is lower, the UEFI update module will be rejected as invalid because of additional security features features implemented in this release.