IBM Support

Remote Supervisor Adapter firmware update (diskette image) - IBM eServer xSeries 345

Download


Version

1.10

Release Date

2 March 2007

Downloadable File

File link File size File description

ibm_fw_rsa_geet24a_dos_i386.chg

3,339 CHANGE HISTORY for the RSA firmware update

ibm_fw_rsa_geet24a_dos_i386.txt

21,586 README for the RSA firmware update

ibm_fw_rsa_geet24a-1_dos_i386.img

1,474,560 RSA firmware update (diskette 1 of 2)

ibm_fw_rsa_geet24a-2_dos_i386.img

1,474,560 RSA firmware update (diskette 2 of 2)

Abstract

Download the latest Remote Supervisor Adapter Firmware update (Diskette Image) for the IBM eServer xSeries 345

Download Description

Use of this update requires your server to be at BIOS version 1.04 or higher. Click here to get the latest BIOS for your system.

New IBM xSeries firmware and device driver file naming convention
New firmware update file formats

Severity: Suggested

Change history

Version 1.10 - GEET24A

Problem(s) Fixed:

Enhancement:

  • Added support for the year 2007 US Daylight Saving Time changes
  • Added Daylight Saving Time support for western Australia

Limitations:
Dependencies:

Version 1.09 - GEET23B

  • Corrected a counter problem that could result in a server clock skew in certain IBM Director environments
  • Fixed a Maximum Segment Size negotiation problem on the network interface which could have prevented oversized data packets from being delivered
  • Corrected a problem which caused the Remote Supervisor Adapter to not renew its DHCP lease when the DHCP server is not on the same subnet mask/network as the Remote Supervisor Adapter
  • Fixed a problem which caused the Remote Supervisor Adapter not to reaquire a new IP address when the former address is lost
  • Corrected a problem that caused the Remote Supervisor Adapter to report the final hours of April 30th in certain time zones as April 31st
  • Allow dashes in the LDAP ASM Group Filter Name
  • Increased the time to live to 128 on all packets from the Remote Supervisor Adapter to accommodate an increased number of network hops

Version 1.08

  • Included new MIB files and SNMP corrections

Version 1.07

  • The DMCFLASH.PKT file is now located on the ISMP firmware update diskette. Removed the ISMP firmware packet from the diskette.
  • When flashing a device while logged in to Remote Supervisor adapter in command mode, an incorrect flash finished message is generated.
  • Corrected an error where a power supply voltage error was not reported

Version 1.06

  • Picked up latest ISMP firmware update
  • Corrected problem with storing administrator password
  • Prevented the Telnet login screen from displaying during a remote graphics session
  • Corrected a problem where "firmware update" was given as a popup help screen when "remote boot" was in progress

Version 1.05

  • Corrected a problem saving the Remote Supervisor Adapter configuration through the Web

Version 1.04

  • Picked up the latest ISMP firmware update (1.04)

Version 1.03

  • Corrected issue of CPU temperatures not showing up over ASM interconnect
  • Web interface now shows the 1.25V value
  • Enabled PXE boot support
  • Fixed serial interface command mode problem
  • Added changes to support the 533 MHz FSB

Version 1.02

  • Added power supply status command
  • Picked up the latest ISMP firmware update

Version 1.01

  • Picked up the latest ISMP firmware update

Version 1.00

  • Initial release

Off

Document Location

Worldwide

Operating System

Older System x:All operating systems listed

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19S","label":"Older System x->xSeries 345"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
14 October 2013

UID

ibm1MIGR-43899

Page Feedback