Advanced System Management Processor Firmware Update diskette version 2.13 (DOS update package) - Netfinity 5000

Download Description

Using the sytems management utility
The procedure to utilize the systems management software is as follows:

1. Insert this diskette into the diskette drive then restart the system. If your system does not boot from the diskette, use POST/BIOS setup to configure the diskette drive as a boot device. Please refer to the Server Library that was included with your system for additional information on the POST/BIOS setup.After your system boots, the "Main Option" menu will appear on the screen. The main option menu contains four options.
2. Use the up-and-down arrow keys to highlight the option you want to perform. Online help is available for each option by pressing F1 while the option is highlighted. General help is available by pressing F1 from one of the help windows. To select an option, highlight it and press Enter. See the readme file for additional information on the options.
3. When you are finished using the utility, select Exit utility from the main menu then press Enter.
4. When prompted, remove the diskette from the diskette drive then press Enter to restart your system.