Troubleshooting
Problem
Instructions for removing the SCSI daughter card
Resolving The Problem
1. Retaining pins
2. SCSI daughter card
| Removing the SCSI daughter card |
|---|
Note: The presence of AC standby power might result in damage to the hardware unless you disconnect the power cord for each power source from the electrical outlet.
- Power-off the server.
- Disconnect the power cord for each power source from the electrical outlet.
- Remove the top cover.
- Remove the shuttle.
- Disconnect the SCSI cable.
- Remove the SCSI assembly.
- Pry the SCSI daughter card off of the four retaining pins.
- To install a SCSI daughter card, reverse the above procedure.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18R","label":"Older System x->xSeries 250"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN15","label":"Older System x->Netfinity 7600"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-45420